The current uname is branch-cXXXX-gHASH
Three changes to make uname more useful.
1. Move from using git rev-list --count to git rev-lis --count --first-parent
since that gives a better, incrementing number.
2. Report this count as 'nXXXXX' rather than 'cXXXXX' because c is part of
a hash and we've changed the sematnics of XXXXX
3. Remove g to make HASH cut and pastable.
Durting review, #1 & #3 had the largest consensus. There was a diversity of
opinion on #2, but on the whole it was positive so I'll acknowledge the dissent,
but move forward with something seems to have support since the dissent was all
about what letter to use where I chose 'n'.
MFC After: 3 days
Reviewed by: rgrimes, emaste (earlier version)
Differential Revision: https://reviews.freebsd.org/D28338
This code implements a version of the devres framework found
working for various iwlwifi use cases and also providing functions
for ttm_page_alloc_dma.c from DRM.
Part of the framework replicates the consumed KPI, while others
are internal helper functions.
In addition the simple devm_k*malloc() consumers were implemented
and kvasprintf() was enhanced to also work for the devm_kasprintf()
case.
Addmittingly lkpi_devm_kmalloc_release() could be avoided but for
the overall understanding of the code and possible memory tracing
it may still be helpful.
Further devsres consumer are implemented for iwlwifi but will follow
later as the main reason for this change is to sort out overlap with
DRM.
Sponsored-by: The FreeBSD Foundation
Obtained-from: bz_iwlwifi
MFC After: 3 days
Reviewed-by: hselasky, manu
Differential Revision: https://reviews.freebsd.org/D28189
Implement linux firmware KPI compat code.
This includes: request_firmware() request_firmware_nowait(),
request_firmware_direct(), firmware_request_nowarn(),
and release_firmware().
Given we will try to map requested names from natively ported
or full-linuxkpi-using drivers to a firmware(9) auto-loading
name format (.ko file name and image name matching),
we quieten firmware(9) and print success or failure (unless
the _nowarn() version was called) in the linuxkpi implementation.
At the moment we try up-to 4 different naming combinations,
with path stripped, original name, and requested name with '/'
or '.' replaced.
We do not currently defer loading in the "nowait" case.
Sponsored-by: The FreeBSD Foundation
Sponsored-by: Rubicon Communications, LLC ("Netgate")
(firmware(9) nowarn update from D27413)
MFC after: 3 days
Reviewed by: kib, manu (looked at older versions)
Differential Revision: https://reviews.freebsd.org/D27414
This node is part of an A10-NSP (L2-BSA) development.
Carrier networks tend to stack three or more tags for internal
purposes and therefore hiding the service tags deep inside of the
stack. When decomposing such an access network frame, the processing
order is typically reversed: First distinguish by service, than by
other means.
This new netgragh node allows to bring the relevant VLAN in front (to
the out-most position). This way other netgraph nodes (like ng_vlan)
can operate on this specific type.
Reviewed by: manpages (gbe), brueffer (manpages), kp
Approved by: kp (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: IKS Service GmbH
Differential Revision: https://reviews.freebsd.org/D22076
nids(4) was a clever idea in the early 2000's when the market was
flooded with 10/100 NICs with Windows-only drivers, but that hasn't been
the case for ages and the driver has had no meaningful maintenance in
ages. It only supports Windows-XP era drivers.
Also remove:
- ndis support from wpa_supplicant
- ndiscvt(8)
Reviewed By: emaste, bcr (manpages)
Differential Revision: https://reviews.freebsd.org/D27609
gitup writes a .gituprevision file into the shallow clone directory. Read that
file and print commit information only.
Submitted by: Michael Osipov <michael.osipov@siemens.com>
Pull Request: https://github.com/freebsd/freebsd-src/pull/449
While here, drop the redundant branch name from the git output and don't
count commits in shallow clones.
Reported by: Michael Osipov <michael.osipov@siemens.com>
MFC after: 2 weeks
Use the existing legacy PCI driver as the basis for shared code
between the legacy and modern PCI drivers. The existing virtio_pci
kernel module will contain both the legacy and modern drivers.
Changes to the virtqueue and each device driver (network, block, etc)
for V1 support come in later commits.
Update the MMIO driver to reflect the VirtIO bus method changes, but
the modern compliance can be improved on later.
Note that the modern PCI driver requires bus_map_resource() to be
implemented, which is not the case on all archs.
The hw.virtio.pci.transitional tunable default value is zero so
transitional devices will continue to be driven via the legacy
driver.
Reviewed by: grehan (mentor)
Differential Revision: https://reviews.freebsd.org/D27856
Based on discussions on freebsd-arch@, enable KERN_TLS in
GENERIC on amd64, but leave it disabled via the
sysctl kern.ipc.tls.enable. Users wishing to enable
ktls must set kern.ipc.tls.enable=1
While here, fix wording in NOTES to mention that KERN_TLS
also does receive now.
Sponsored by: Netflix
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D28163
The old vendor tree was never fully merged and doing partial merge isn't
supported with git subtree merge so a new one was created.
Switch the build to use the new DTS from sys/contrib/device-tree
This also bump the DTS used to be in sync with Linux 5.9
While here change the way to get the linux version, simply hardcode
the value in sys/dts/freebsd-compatible.dts and use awk to get that
to put it in the CFLAGS.
As a bonus we now have the bindings docs available
in sys/contrib/device-tree/Bindings/ so no need to link to the Linux repo
or to the vendor tree.
Stop running ctfconvert over generated C files in the kernel by marking
them with no-ctfconvert.
This fixes warnings from ctfconvert trying to parse C files:
ctfconvert: file.c: Couldn't read ehdr: Invalid argument
Reviewed by: emaste, mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28156
usbhid(4) is disabled by default to avoid conflicts with existing USB HID
drivers. To enable it place following lines to /boot/loader.conf:
hw.usb.usbhid.enable=1
usbhid_load="YES"
Suggested by: jhb
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D28124
This is the superset of the nooptions found in the -DEBUG kernels.
Reviewed by: emaste, manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28152
When building the arm64 kernel for use with dtrace or hwpmc we need
to include a stack frame so they can extract a stack trace.
As with amd64 also build a stack frame in modules.
Sponsored by: Innovate UK
With newer AMD GPUs (>=Navi,Renoir) there is FPU context usage in the
amdgpu driver.
The `kernel_fpu_begin/end` implementations in drm did not even allow nested
begin-end blocks.
Submitted by: Greg V
Reviewed By: manu, hselasky
Differential Revision: https://reviews.freebsd.org/D28061
A driver can register a shrinker that will be called when the kernel
wants to free some memory.
Add support for that in linuxkpi and call the registered shrinkers
when the lowmem event is triggered.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D27728
Stop trying to manually calculate RID, which cannot be done correctly
by PCI_DEVFN(). Use PCI_GET_RID() method instead.
Do not use pci_find_dbsf() to go from the linux pci_dev to freebsd
device_t. First, device is readily available as dev.bsddev. Second,
using pci_find_dbsf() fails for ARI-enabled functions with large
function numbers, because PCI_SLOT()/PCI_FUNC() are for non-ARI.
Reviewed by: bz, hselasky, manu
Tested by: manu (drm)
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27960
Everything required for remote kernel debugging over a serial
connection. For FDT-based systems, a debug port can be specified by
setting hw.fdt.dbgport to the desired device tree node in loader.conf.
For example, hw.fdt.dbgport="uart1", or
hw.fdt.dbgport="serial@ff1a0000".
Looks good: emaste
Tested by: rwatson
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27727
Remove wi(4). pccard is going away, and wi only supports PC Card
devices, though it has a minor amount of glue to also support
PCI cards. However, removing the one without removing the other
is hard, so the whole driver is being removed.
Relnotes: Yes
pccard is being removed, so remove bt3c driver since it only has PC
Card attachment. Also remove bt3cfw(8) since it's the firmware for this
driver.
Relnotes: Yes
PC Card support is being removed, so remove its attachment here. ndis
is slated to be removed entirely for 13, but that's not been done yet.
Relnotes: Yes
This change includes:
hpen - Generic / MS Windows compatible HID pen tablet driver.
hgame - Generic game controller and joystick driver.
xb360gp - Xbox360-compatible game controller driver.
Submitted by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27993)
hidmap is a kernel module that maps HID input usages to evdev events.
Following dependent drivers is included in the commit:
hms - HID mouse driver.
hcons - Consumer page AKA Multimedia keys driver.
hsctrl - System Controls page (Power/Sleep keys) driver.
ps4dshock - Sony DualShock 4 gamepad driver.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27993
which installs /dev/uhid# alias to hidraw character device for
compatibility with some existing uhid(4) users like Firefox.
As side effect it renames traditional uhid(4) driver to hidraw
to make possible using of common unit number allocator.
Requested by: Greg V <greg_unrelenting.technology>
Reviewed by: hselasky (as part of D27992)
This driver provides raw access to HID devices through uhid(4)-compatible
interface and is based on pre-8.x uhid(4) code. Unlike uhid(4) it does
not take devices in to monopoly ownership and allows parallel access
from other drivers.
hidraw supports Linux's hidraw-compatible interface as well.
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D27992