Over the past few months we published multiple snapshots for this
Linux derived driver and it has become fairly stable in terms of
minimal local changes needed for new updates.
The current version is based on iwlwifi-next update at
cbaa6aeedee5f92dafa5982eceea2a1f98ce4f7d with the addition of
a hand full of files replaced for FreeBSD.
Given the lack of full license texts on non-local files this is
imported under the draft policy for handling SPDX files (D29226). [1]
Do not yet hook this to the build until the remaining compat code
is all in. Along with the firmware import this will make publishing
the last bits and final testing a lot easier.
Sponsored by: The FreeBSD Foundation
Approved by: core (imp) [1]
MFC after: 10 days
Import the most recent versions of the firmware images for iwlwifi
chipsets supported by the "mvm" sub-driver.
This is based on linux-firmware at f5d519563ac9d2d1f382a817aae5ec5473811ac8.
The license of the firmware matches the previous iwnfw(4) and
iwmfw(4) firmware files and you can find a copy in
sys/contrib/dev/iwlwififw/LICENCE.iwlwifi_firmware .
Add build infrastructure to create the .ko files but do not yet hook
it up to the build until all parts are in the tree.
There is an open issue concerning kldxref that we need to resolve
(D32383).
Sponsored by: The FreeBSD Foundation
MFC after: 10 days
Belatedly remove twa(4). It was supposed to go before 13.0, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33114
Belatedly remove esp(4). It was tagged as gone in 13, but was overlooked
until now.
Sponsored by: Netflix
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33115
Belatedly remove amr(4). It was slated to depart before 13.0 but was
overlooked until now.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33113
Belatedly remove iir(4). It was slated to go before 13, but was
overlooked.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33112
We'd said this was going away in 13, but was overlooked. Belatedly
remove.
Sponsored by: Netflix
Relnotes: yes
Reviewed by: scottl
Differential Revision: https://reviews.freebsd.org/D33111
The iavf(4) driver now uses a different source base from ixl(4), since
it will be the standard VF driver for new Intel Ethernet products going
forward, including ice(4). It continues to use the iflib framework
for network drivers.
Since it now uses a different source code base, this commit adds a new
sys/dev/iavf entry, but it re-uses the existing module name so no
configuration changes are necessary.
Signed-off-by: Eric Joyner <erj@FreeBSD.org>
Reviewed by: kbowling@
Tested by: lukasz.szczepaniak@intel.com
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D28636
Add driver for pcf85063 real time clock. Register set and get time
methods. Parse data obtained from bus according to specification
and fill kernel structures.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32817
and remove non-present symbols that are now reported by kmod_syms.awk.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32878
Both modules provide many symbols used by various DTrace provider
modules, so just export everything.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
resolves: link_elf_obj: symbol abd_checksum_edonr_native undefined
The required module-build bits were originally identified in the
upstream pull request: https://github.com/openzfs/zfs/pull/12735
But were missed when the code was imported (since they are not
committed upstream).
X-MFC-With: dae1713419a6, 09cd63416051
Submitted by: freqlabs
Sponsored by: Klara Inc.
Notable upstream pull request merges:
#12285 Introduce a tunable to exclude special class buffers from L2ARC
#12689 Check l2cache vdevs pending list inside the vdev_inuse()
#12735 Enable edonr in FreeBSD
#12743 FreeBSD: fix world build after de198f2
#12745 Restore dirty dnode detection logic
Obtained from: OpenZFS
OpenZFS commit: 269b5dadcfd1d5732cf763dddcd46009a332eae4
NOTE: HEADS UP read the note below if your kernel config is not including GENERIC!!
This patch does a bit of cleanup on TCP congestion control modules. There were some rather
interesting surprises that one could get i.e. where you use a socket option to change
from one CC (say cc_cubic) to another CC (say cc_vegas) and you could in theory get
a memory failure and end up on cc_newreno. This is not what one would expect. The
new code fixes this by requiring a cc_data_sz() function so we can malloc with M_WAITOK
and pass in to the init function preallocated memory. The CC init is expected in this
case *not* to fail but if it does and a module does break the
"no fail with memory given" contract we do fall back to the CC that was in place at the time.
This also fixes up a set of common newreno utilities that can be shared amongst other
CC modules instead of the other CC modules reaching into newreno and executing
what they think is a "common and understood" function. Lets put these functions in
cc.c and that way we have a common place that is easily findable by future developers or
bug fixers. This also allows newreno to evolve and grow support for its features i.e. ABE
and HYSTART++ without having to dance through hoops for other CC modules, instead
both newreno and the other modules just call into the common functions if they desire
that behavior or roll there own if that makes more sense.
Note: This commit changes the kernel configuration!! If you are not using GENERIC in
some form you must add a CC module option (one of CC_NEWRENO, CC_VEGAS, CC_CUBIC,
CC_CDG, CC_CHD, CC_DCTCP, CC_HTCP, CC_HD). You can have more than one defined
as well if you desire. Note that if you create a kernel configuration that does not
define a congestion control module and includes INET or INET6 the kernel compile will
break. Also you need to define a default, generic adds 'options CC_DEFAULT=\"newreno\"
but you can specify any string that represents the name of the CC module (same names
that show up in the CC module list under net.inet.tcp.cc). If you fail to add the
options CC_DEFAULT in your kernel configuration the kernel build will also break.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
RELNOTES:YES
Differential Revision: https://reviews.freebsd.org/D32693
Notable upstream pull request merges:
#12333: Creating gang ABDs for Raidz optional IOs
#12668: FreeBSD: Catch up with recent VFS changes
#12687: Skip spacemaps reading in case of pool readonly import
#12704: Fix some FreeBSD VOPs to synchronize properly with teardown
#12724: Fix lseek(SEEK_DATA/SEEK_HOLE) mmap consistency
Obtained from: OpenZFS
OpenZFS commit: 6c8f03232aa98e950bfe187f9ff53d3541687b50
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb (previous version)
Differential revision: https://reviews.freebsd.org/D32099
AES-CBC OpenSSL assembly is used underneath.
The glue layer(ossl_aes.c) is based on CHACHA20 implementation.
Contrary to the SHA and CHACHA20, AES OpenSSL assembly logic
does not have a fallback implementation in case CPU doesn't
support required instructions.
Because of that CPU caps are checked during initialization and AES
support is advertised only if available.
The feature is available on all architectures that ossl supports:
i386, amd64, arm64.
The biggest advantage of this patch over existing solutions
(aesni(4) and armv8crypto(4)) is that it supports SHA,
allowing for ETA operations.
Sponsored by: Stormshield
Obtained from: Semihalf
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D32099
In preparation for machine-independent sys/compat/linux/linux_ptrace.c,
rename the i386-specific Linux ptrace(2) implementation. No functional
changes.
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D32757
Only build on RISC-V for now, since we're not aware of any other cores
with this IP supported by FreeBSD.
Reviewed by: jrtc27, philip
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D32737
It was previously used by felix(4) for PHY communication.
Since that is not the case anymore this driver is now left unused.
Obtained from: Semihalf
Sponsored by: Alstom Group
Previously we would use an external MDIO device found on the PCI bus.
Switch to using MDIO mapped in a separate BAR of the switch device.
It is much easier this way since we don't have to depend on another
driver anymore.
Obtained from: Semihalf
Sponsored by: Alstom Group
The new iSCSI initiator iscsi(4) was introduced with FreeBSD 10.0, and
the old intiator was marked obsolete shortly thereafter (in commit
d32789d95cfbf, MFC'd to stable/10 in ba54910169c4). Remove it now.
Reviewed by: jhb, mav
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32673
The last two drivers that required sppp are cp(4) and ce(4).
These devices are still produced and can be purchased
at Cronyx <http://cronyx.ru/hardware/wan.html>.
Since Roman Kurakin <rik@FreeBSD.org> has quit them, they no
longer support FreeBSD officially. Later they have dropped
support for Linux drivers to. As of mid-2020 they don't even
have a developer to maintain their Windows driver. However,
their support verbally told me that they could provide aid to
a FreeBSD developer with documentaion in case if there appears
a new customer for their devices.
These drivers have a feature to not use sppp(4) and create an
interface, but instead expose the device as netgraph(4) node.
Then, you can attach ng_ppp(4) with help of ports/net/mpd5 on
top of the node and get your synchronous PPP. Alternatively
you can attach ng_frame_relay(4) or ng_cisco(4) for HDLC.
Actually, last time I used cp(4) back in 2004, using netgraph(4)
instead of sppp(4) was already the right way to do.
Thus, remove the sppp(4) related part of the drivers and enable
by default the negraph(4) part. Further maintenance of these
drivers in the tree shouldn't be a big deal.
While doing that, remove some cruft and enable cp(4) compilation
on amd64. The ce(4) for some unknown reason marks its internal
DDK functions with __attribute__ fastcall, which most likely is
safe to remove, but without hardware I'm not going to do that, so
ce(4) remains i386-only.
Reviewed by: emaste, imp, donner
Differential Revision: https://reviews.freebsd.org/D32590
See also: https://reviews.freebsd.org/D23928
Notable upstream pull request merges:
#12392 Avoid panic in case of pool errors and missing L2ARC
#12448 skip snapshot in zfs_iter_mounted()
#12516 Fix NFS and large reads on older kernels
#12533 Fail invalid incremental recursive send gracefully
#12569 FreeBSD: Really zero the zero page
#12575 Reject zfs send -RI with nonexistent fromsnap
#12602 Correct refcount_add in dmu_zfetch
#12650 zpool should call zfs_nicestrtonum() with non-NULL handle
Obtained from: OpenZFS
OpenZFS commit: ec64fdb93d144ab1884097cfd36e18b62a2db848
Having it included confuses KOBJOPLOOKUP resulting in kobj_error_method
being called instead of a devmethod from the switch driver.
That in turn returns ENXIO which was treated as a pointer and
dereferenced by etherswitch ioctl logic causing the kernel to panic.
Fixes: b542c9e42ba4 (modules: felix: Add needed dependencies)
The ng_h4 module was disconnected 13 years ago when the tty later was
locked by Ed. It completely fails to compile, and has a number of false
positives for Giant use. Remove it for lack of interest. Bluetooth has
largely (completely?) moved on from bluetooth over UART transport.
OK'd by: emax
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D31846
except linux/pci.h to avoid conflicts with Linux version.
This allows to #define resource in drm-kmod globally and strip some #ifdef-s
Reviewed by: hselasky, manu
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D31673
It supports the following Microchip devices:
LAN7430 PCIe Gigabit Ethernet controller with PHY
LAN7431 PCIe Gigabit Ethernet controller with RGMII interface
The driver has a number of caveats and limitations, but is functional.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
The firmwares and the following changelog are from the "Chelsio Unified
Wire v3.15.0.0 for Linux."
Version : 1.26.2.0
Date : 09/24/2021
====================
FIXES
-----
BASE:
- Added support for SFP+ RJ45 (0x1C).
- Fixing backward compatibility issue with older drivers when multiple
speeds are passed to firmware.
OFLD:
- Do not touch tp_plen_max if driver is supplying tp_plen_max. This
fixes a connection reset issue in iscsi.
ENHANCEMENTS
------------
BASE:
- Firmware header modified to add firmware binary signature.
MFC after: 1 month
Sponsored by: Chelsio Communications
This reverts commit 0f6829488ef32142b9ea1c0806fb5ecfe0872c02.
Also it changes the type of md_usr_fpu_save struct mdthread member
to void *, which is what uncovered this trouble. Now the save area
is untyped, but since it is hidden behind accessors, it is not too
significant. Since apparently there are consumers affected outside
the tree, this hack is better than one from the reverted revision.
PR: 258678
Reported by: cy
Reviewed by: cy, kevans, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32060
According to https://github.com/NuxiNL/cloudlibc:
CloudABI is no longer being maintained. It was an awesome experiment,
but it never got enough traction to be sustainable.
There is no reason to keep it in FreeBSD.
Approved by: ed (private mail)
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D31923
when compiling in amd64 kernel environment with -m32. This is a temporal
workaround for some future proper (but unclear) fix.
Reviewed by: jhb, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D31954
Fix device detach and attach routine. Add required Makefile
to build as a module. Remove entry from GENERIC, since now
it can be loaded automatically.
Tested on EspressoBin.
Obtained from: Semihalf
Reviewed by: manu
Differential revision: https://reviews.freebsd.org/D31581
Add two files base.c and base.h to reduce the redundancy
in the silicon family code.
Remove the code duplication from e1000_82575 files.
Clean family specific functions from base.
Fix up a stray and duplicate function declaration.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Approved by: imp
Obtained from: DPDK (44dddd14059f151f39f7e075b887decfc9a10f11)
MFC after: 1 week
ib_uverbs_flow_resources_free() is declard in two header files in
upstream OFED. Disable the warning to avoid introducing diffs to fix
the build on GCC 9.
While here, fix the ibcore module to disable the same warnings
disabled in OFED_CFLAGS.
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D31943
