Status and Control register at port 0x61.
Be more conservative about "catching up" callouts that were supposed
to fire in the past by skipping an interrupt if it was
scheduled too far in the past.
Restore the PIT ACPI DSDT entries and add an entry for NMISC too.
Approved by: neel (co-mentor)
and normal mode; this makes it possible to compile with the former
by default, but use it only when neccessary. That's especially
important for the userland part.
Sponsored by: The FreeBSD Foundation
needed it to be already enabled, because listening in proxy mode
requires it; however, it's conf_apply() that opens pidfiles,
so it resulted in port being enabled before pidfile was opened.
This was not so bad, but it was also disabled when pidfile couldn't
be opened due to ctld already running; this means that starting
second ctld instance screwed up the first.
Sponsored by: The FreeBSD Foundation
that the slightly older dialog(1) requires --separate-output when using the
--checklist widget to force response to produce unquoted values (whereas in
stable/10 --checklist widget without --separate-output will only quote the
checklist labels in the response if the label is multi-word (contains any
whitespace).
Since these enhancements (see revisions 263956 and 264437) were developed
originally on 10, the --separate-output option was omitted. When merged to
stable/9, we (Allan Jude) and I found during testing that the "always-
quoting" of the response was causing things like struct interpolation to
fail (`f_struct device_$dev' would produce `f_struct device_\"da0\"' for
example -- literal quotes inherited from dialog(1) --checklist response).
To see the behavior, execute the following on stable/9 versus stable/10:
dialog --checklist disks: 0 0 0 da0 "" off da1 "" off
Check both items and hit enter. On stable/10, the response is:
da0 da1
On stable/9 the response is:
"da0" "da1"
If you use the --separate-output option, the response is the same for both:
da0
da1
So applying --separate-output on every platform until either one of two
things occurs 1) dialog(1,3) gets synchronized between stable/9, higher or
2) we drop support for stable/9.
MFC after: 3 days
Reviewed by: Allan Jude
compare.
Because of the change to find in SVN r253886, the entire temproot would be
deleted if it became empty, leading to a confusing message "*** FATAL ERROR:
The temproot directory ${TEMPROOT} has disappeared!"
Note that mergemaster does not do anything useful in this situation anyway
(e.g. put IGNORE_FILES="/etc/group /etc/master.passwd" in
/etc/mergemaster.rc and run mergemaster -p).
As noted in that commit, add -mindepth 1.
PR: bin/188485
Submitted by: David Boyd
MFC after: 1 week
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
0xff. Some guests may attempt to read from this port to identify
psuedo-PNP ISA devices. (The ie(4) driver in FreeBSD/i386 is one
example.)
Reviewed by: grehan
execution to a emumation program via parsing of ELF header information.
With this kernel module and userland tool, poudriere is able to build
ports packages via the QEMU userland tools (or another emulator program)
in a different architecture chroot, e.g. TARGET=mips TARGET_ARCH=mips
I'm not connecting this to GENERIC for obvious reasons, but this should
allow the kernel module to be built by default and enable the building
of the userland tool (which automatically loads the kernel module).
Submitted by: sson@
Reviewed by: jhb@
Call through to /dev/random synchronously to fill
virtio buffers with RNG data.
Tested with FreeBSD-CURRENT and Ubuntu guests.
Submitted by: Leon Dang
Discussed with: markm
MFC after: 3 weeks
Sponsored by: Nahanni Systems
Teach pciconf how to print out the status (enabled/disabled) of the ARI
capability on PCI Root Complexes and Downstream Ports.
MFC after: 2 months
Sponsored by: Sandvine Inc.
from any context i.e., it is not required to be called from a vcpu thread. The
ioctl simply sets a state variable 'vm->suspend' to '1' and returns.
The vcpus inspect 'vm->suspend' in the run loop and if it is set to '1' the
vcpu breaks out of the loop with a reason of 'VM_EXITCODE_SUSPENDED'. The
suspend handler waits until all 'vm->active_cpus' have transitioned to
'vm->suspended_cpus' before returning to userspace.
Discussed with: grehan
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
The impact of this bug is that you cannot build a kernel if both of the
following are true:
1) The kernel config file is in a non-default location
2) The kernel config file uses the "include" statement from config(5).
usr.sbin/config/main.c
usr.sbin/config/config.8
usr.sbin/config/config.h
usr.sbin/config/lang.l
Added a "-I path" option to config(8). By analogy to cc(1), it adds
an extra path in which the "include" statement will search for
files.
Makefile.inc1
Pass "-I ${KERNCONFDIR}" to config(8).
PR: kern/187712
Reviewed by: will, imp (previous version)
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
