Because bmake defaults to .../share/mk now, this code was not doing anything
to help objdir builds (such as the rescue build). Export the same default.
Sponsored by: EMC / Isilon Storage Division
Reflect all recent changes in the manpage:
- add adhoc-demo and hostap into list of supported modes;
add few examples for them;
- mention encryption/decryption offload for CCMP cipher;
- extend list of driver messages in the DIAGNOSTICS;
- document hostap mode limitations / powersave instability
in the CAVEATS section.
Differential Revision: https://reviews.freebsd.org/D5149
Add a bit_count function, which efficiently counts the number of bits set in
a bitstring.
sys/sys/bitstring.h
tests/sys/sys/bitstring_test.c
share/man/man3/bitstring.3
Add bit_alloc
sys/kern/subr_unit.c
Use bit_count instead of a naive counting loop in check_unrhdr, used
when INVARIANTS are enabled. The userland test runs about 6x faster
in a generic build, or 8.5x faster when built for Nehalem, which has
the POPCNT instruction.
sys/sys/param.h
Bump __FreeBSD_version due to the addition of bit_alloc
UPDATING
Add a note about the ABI incompatibility of the bitstring(3)
changes, as suggested by lidl.
Suggested by: gibbs
Reviewed by: gibbs, ngie
MFC after: 9 days
X-MFC-With: 299090, 300538
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6255
It turns out we need to leave this in place for a while so that people
running self-hosting armv6hf systems can do the builds necessary to update
to armv6 (which is now hardfloat by default).
This will still build the compiler for the target but will not build the
bootstrap cross-compiler in the cross-tools phase. Other toolchain
bootstrapping, such as elftoolchan and binutils, currently still occurs.
This will utilize the default CC (cc, /usr/bin/cc) as an external compiler.
This is planned to be on-by-default eventually.
This will utilize the __FreeBSD_cc_version compiler macro defined in the
source tree and compare it to CC's version. If they match then the
cross-compiler is skipped. If [X]CC is an external compiler (absolute
path) or WITHOUT_CROSS_COMPILER is already set, then this logic is skipped.
If the expected bootstrap compiler type no longer matches the found CC
compiler type (clang vs gcc), then the logic is skipped. As an extra
safety check the version number is also compared from the compiler to
the tree version.
Clang:
The macro FREEBSD_CC_VERSION is defined in:
lib/clang/include/clang/Basic/Version.inc
For clang -target will be used if TARGET_ARCH != MACHINE_ARCH. This
is from the current external toolchain logic. There is currently an
assumption that the host compiler can build the TARGET_ARCH. This
will usually be the case since we don't conditionalize target arch
support in clang, but it will break when introducing new
architectures. This problem is mitigated by incrementing the version
when adding new architectures.
GCC:
The macro FBSD_CC_VER is defined in:
gnu/usr.bin/cc/cc_tools/freebsd-native.h
For GCC there is no simple -target support when TARGET_ARCH !=
MACHINE_ARCH. In this case the opportunistic skip is not done. If we
add proper support for this case in external toolchain logic then it
will be fine to enable.
This relies on the macros being incremented whenever any change occurs
to these compilers that warrant rebuilding files. It also should never
repeat earlier values.
Reviewed by: brooks, bapt, imp
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D6357
See r298220 for more explanation. We don't want to prevent installing
if a cookie exists for the install target.
Sponsored by: EMC / Isilon Storage Division
This is the same problem as r290629. With META_MODE we do not generate
.depend files, so there is no proper dependency to lookup. Guessed
dependencies must be used. If this proves to be a problem then we will
have to generate and use .depend files even with META_MODE.
Sponsored by: EMC / Isilon Storage Division
This is a follow-up to r299289. If the user did not run bootstrap-tools
for this directory then just build the tool as normal. It assumes that
TARGET == MACHINE, but that was already the case before r299289.
Sponsored by: EMC / Isilon Storage Division
sglist_count_vmpages() determines the number of segments required for
a buffer described by an array of VM pages. sglist_append_vmpages()
adds the segments described by such a buffer to an sglist. The latter
function is largely pulled from sglist_append_bio(), and
sglist_append_bio() now uses sglist_append_vmpages().
Reviewed by: kib
Sponsored by: Chelsio Communications
Add a pair of bus methods that can be used to "map" resources for direct
CPU access using bus_space(9). bus_map_resource() creates a mapping and
bus_unmap_resource() releases a previously created mapping. Mappings are
described by 'struct resource_map' object. Pointers to these objects can
be passed as the first argument to the bus_space wrapper API used for bus
resources.
Drivers that wish to map all of a resource using default settings
(for example, using uncacheable memory attributes) do not need to change.
However, drivers that wish to use non-default settings can now do so
without jumping through hoops.
First, an RF_UNMAPPED flag is added to request that a resource is not
implicitly mapped with the default settings when it is activated. This
permits other activation steps (such as enabling I/O or memory decoding
in a device's PCI command register) to be taken without creating a
mapping. Right now the AGP drivers don't set RF_ACTIVE to avoid using
up a large amount of KVA to map the AGP aperture on 32-bit platforms.
Once RF_UNMAPPED is supported on all platforms that support AGP this
can be changed to using RF_UNMAPPED with RF_ACTIVE instead.
Second, bus_map_resource accepts an optional structure that defines
additional settings for a given mapping.
For example, a driver can now request to map only a subset of a resource
instead of the entire range. The AGP driver could also use this to only
map the first page of the aperture (IIRC, it calls pmap_mapdev() directly
to map the first page currently). I will also eventually change the
PCI-PCI bridge driver to request mappings of the subset of the I/O window
resource on its parent side to create mappings for child devices rather
than passing child resources directly up to nexus to be mapped. This
also permits bridges that do address translation to request suitable
mappings from a resource on the "upper" side of the bus when mapping
resources on the "lower" side of the bus.
Another attribute that can be specified is an alternate memory attribute
for memory-mapped resources. This can be used to request a
Write-Combining mapping of a PCI BAR in an MI fashion. (Currently the
drivers that do this call pmap_change_attr() directly for x86 only.)
Note that this commit only adds the MI framework. Each platform needs
to add support for handling RF_UNMAPPED and thew new
bus_map/unmap_resource methods. Generally speaking, any drivers that
are calling rman_set_bustag() and rman_set_bushandle() need to be
updated.
Discussed on: arch
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D5237
The DTraceToolkit is part of the Open DTrace effort and is supported
on FreeBSD as a port (sysutils/DTraceToolkit) which has been updated
to properly track toolkit development upstream.
Sponsored by: DARPA, AFRL
intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013.
A robust mutex is guaranteed to be cleared by the system upon either
thread or process owner termination while the mutex is held. The next
mutex locker is then notified about inconsistent mutex state and can
execute (or abandon) corrective actions.
The patch mostly consists of small changes here and there, adding
neccessary checks for the inconsistent and abandoned conditions into
existing paths. Additionally, the thread exit handler was extended to
iterate over the userspace-maintained list of owned robust mutexes,
unlocking and marking as terminated each of them.
The list of owned robust mutexes cannot be maintained atomically
synchronous with the mutex lock state (it is possible in kernel, but
is too expensive). Instead, for the duration of lock or unlock
operation, the current mutex is remembered in a special slot that is
also checked by the kernel at thread termination.
Kernel must be aware about the per-thread location of the heads of
robust mutex lists and the current active mutex slot. When a thread
touches a robust mutex for the first time, a new umtx op syscall is
issued which informs about location of lists heads.
The umtx sleep queues for PP and PI mutexes are split between
non-robust and robust.
Somewhat unrelated changes in the patch:
1. Style.
2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared
pi mutexes.
3. Removal of the userspace struct pthread_mutex m_owner field.
4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls
the lifetime of the shared mutex associated with a vnode' page.
Reviewed by: jilles (previous version, supposedly the objection was fixed)
Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects)
Tested by: pho
Sponsored by: The FreeBSD Foundation
translate the pci rid to a controller ID. The translation could be based
on the 'msi-map' OFW property, a similar ACPI option, or hard-coded for
hardware lacking the above options.
Reviewed by: wma
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Add a new get_id interface to pci and pcib. This will allow us to both
detect failures, and get different PCI IDs.
For the former the interface returns an int to signal an error. The ID is
returned at a uintptr_t * argument.
For the latter there is a type argument that allows selecting the ID type.
This only specifies a single type, however a MSI type will be added
to handle the need to find the ID the hardware passes to the ARM GICv3
interrupt controller.
A follow up commit will be made to remove pci_get_rid.
Reviewed by: jhb, rstone (previous version)
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6239
We want to avoid .text relocations in shared objects. libcrypto was the
only consumer and it is now fixed (as of r299389). Remove the now-unused
support for turning off the linker warning.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D6323
detect failures, and get different PCI IDs.
For the former the interface returns an int to signal an error. The ID is
returned at a uintptr_t * argument.
For the latter there is a type argument that allows selecting the ID type.
This only specifies a single type, however a MSI type will be added
to handle the need to find the ID the hardware passes to the ARM GICv3
interrupt controller.
A follow up commit will be made to remove pci_get_rid.
Reviewed by: jhb, rstone
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6239
Kernel installs always override KMODDIR when installing modules, so
this default setting is only used for standalone module builds. Many
out-of-tree modules manually override KMODDIR already to avoid placing
modules in /boot/kernel. This now makes that behavior the default.
Discussed on: arch@
Reviewed by: imp
Relnotes: yes
the bio to a pristine state should you wish to re-use it for another
I/O without freeing it. In the bast, a simple bzero was done to do
this, but that may not be sufficient in the future when the bio may
contain state that's not part of the documented API. Besides, it makes
the code clearer as to the intent...
Noticed by: smh@
As result of this, a new examples package is now created.
Note, this is only effective with 'SHARED=copies' (the default),
as the 'SHARED=symlinks' mechanism will create a symlink to the
source tree version of the file(s).
Sponsored by: The FreeBSD Foundation
bus_get_cpus() returns a specified set of CPUs for a device. It accepts
an enum for the second parameter that indicates the type of cpuset to
request. Currently two valus are supported:
- LOCAL_CPUS (on x86 this returns all the CPUs in the package closest to
the device when DEVICE_NUMA is enabled)
- INTR_CPUS (like LOCAL_CPUS but only returns 1 SMT thread for each core)
For systems that do not support NUMA (or if it is not enabled in the kernel
config), LOCAL_CPUS fails with EINVAL. INTR_CPUS is mapped to 'all_cpus'
by default. The idea is that INTR_CPUS should always return a valid set.
Device drivers which want to use per-CPU interrupts should start using
INTR_CPUS instead of simply assigning interrupts to all available CPUs.
In the future we may wish to add tunables to control the policy of
INTR_CPUS (e.g. should it be local-only or global, should it ignore
SMT threads or not).
The x86 nexus driver exposes the internal set of interrupt CPUs from the
the x86 interrupt code via INTR_CPUS.
The ACPI bus driver and PCI bridge drivers use _PXM to return a suitable
LOCAL_CPUS set when _PXM exists and DEVICE_NUMA is enabled. They also and
the global INTR_CPUS set from the nexus driver with the per-domain set from
_PXM to generate a local INTR_CPUS set for child devices.
Compared to the r298933, this version uses 'struct _cpuset' in
<sys/bus.h> instead of 'cpuset_t' to avoid requiring <sys/param.h>
(<sys/_cpuset.h> still requires <sys/param.h> for MAXCPU even though
<sys/_bitset.h> does not after recent changes).
