The chain command can be used to chain load another binary.
If veriexec is enabled we should verify it first.
Note that on EFI systems the verification was already done
through firmware, assuming that Secure Boot was enabled there.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
MFC after: 1 week
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D20952
During early stages of kern_exec(), including strings copyout,
p_textvp for init is NULL. This prevented stack grow from working for
init execution.
Without stack gap enabled, initial stack segment size is enough for
strings passed by kernel to init. With the gap enabled, the used
address might fall out of the initial segment, which kills init.
Exclude initproc from the check for contexts which should not cause
stack grow in the target map.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Attempts to use cryptodev (e.g. tests at /usr/src/tests/sys/opencrypto
with armv8crypto added to the module lists) were causing a panic.
Submitted by: Greg V <greg_unrelenting.technology>
Differential Revision: https://reviews.freebsd.org/D21012
IPPROTO 33 is DCCP in the IANA Registry:
https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
IPPROTO_SEP was added about 20 years ago in r33804. The entries were added
straight from RFC1700, without regard to whether they were used.
The reference in RFC1700 for SEP is '[JC120] <mystery contact>', this is an
indication that the protocol number was probably in use in a private network.
As RFC1700 is no longer the authoritative list of internet numbers and that
IANA assinged 33 to DCCP in RFC4340, change the header to the actual
authoritative source.
Reviewed by: Richard Scheffenegger, bz
Approved by: bz (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21178
Move ip6asfrag and the accompanying IP6_REASS_MBUF macro from
ip6_var.h into frag6.c as they are not used outside frag6.c.
Sadly struct ip6q is all over the mac framework so we have to
leave it public.
This reduces the public KPI space.
MFC after: 3 months
X-MFC: possibly MFC the #define only to stable branches
Sponsored by: Netflix
Consitently put () around return values.
Do not assign variables at the time of variable declaration.
Sort variables. Rename ia to ia6, remove/reuse some variables used only
once or twice for temporary calculations.
No functional changes intended.
MFC after: 3 months
Sponsored by: Netflix
Cleanup some comments (start with upper case, ends in punctuation,
use width and do not consume vertical space). Update comments to
RFC8200. Some whitespace changes.
No functional changes.
MFC after: 3 months
Sponsored by: Netflix
- Use new zlib headers;
- Removed z_alloc and z_free to use the common sys/dev/zlib version.
- Replace z_compressBound with compressBound from zlib.
While there, limit LZMA CFLAGS to apply only for g_uzip_lzma.c.
PR: 229763
Submitted by: Yoshihiro Ota <ota j email ne jp> (with changes,
bugs are mine)
Differential Revision: https://reviews.freebsd.org/D20271
pmap's lock ensures that other operations on the pmap don't observe the
old mapping being broken before the new mapping is established. However,
pmap_kextract() doesn't acquire the kernel pmap's lock, so it may observe
the broken mapping. And, if it does, it returns an incorrect result.
This revision implements a lock-free solution to this problem in
pmap_update_entry() and pmap_kextract() because pmap_kextract() can't
acquire the kernel pmap's lock.
Reported by: andrew, greg_unrelenting.technology
Reviewed by: andrew, markj
Tested by: greg_unrelenting.technology
X-MFC with: r350579
Differential Revision: https://reviews.freebsd.org/D21169
It is part of -Wformat, which is enabled by -Wall. Empty format strings are
well defined and it is perfectly reasonable to expect them in a formatting
interface.
Summary:
autounmountd(8) uses doubles to handle mount time durations. However,
it must convert to integer types, time_t in particular, to do anything
meaningful. Additionally, even though it's a floating-point value in
seconds, the sub-seconds component is never used, so it's unnecessary.
Switching type to time_t fixes an assertion on powerpc64, which checks
that a sleep value that's not -1.0 is greater than 0. On powerpc64, it
happens that the value of -1.0 gets loaded as a float (perhaps a bug in
gcc), but gets compared to a double. This compares as false, so follows
through the 'sleep != -1.0' path, and fails the assert. Since the
sub-second component isn't used in the double, just drop it and deal
with whole-integer seconds.
Reviewed by: trasz
Differential Revision: https://reviews.freebsd.org/D21109
KDB is standard and the kdb_active variable is always available. So,
de-conditionalize inclusion of sys/kdb.h in kern_sysctl.c.
Reported by: Michael Butler <imb AT protected-networks.net>
X-MFC-With: r350713
Sponsored by: Dell EMC Isilon
Implement `sysctl` in `ddb` by overriding `SYSCTL_OUT`. When handling the
req, we install custom ddb in/out handlers. The out handler prints straight
to the debugger, while the in handler ignores all input. This is intended
to allow us to print just about any sysctl.
There is a known issue when used from ddb(4) entered via 'sysctl
debug.kdb.enter=1'. The DDB mode does not quite prevent all lock
interactions, and it is possible for the recursive Giant lock to be unlocked
when the ddb(4) 'sysctl' command is used. This may result in a panic on
return from ddb(4) via 'c' (continue). Obviously, this is not a problem
when debugging already-paniced systems.
Submitted by: Travis Lane (formerly: <travis.lane AT isilon.com>)
Reviewed by: vangyzen (earlier version), Don Morris <dgmorris AT earthlink.net>
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D20219
On FreeBSD 13.0, the fuse driver will always be known as fusefs. The
backwards compatibility symlink will still be used for stable/12 and
stable/11, though.
Reported by: jhibbits
Reviewed by: rgrimes, imp, cem
MFC after: Never
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21181
If the length of the source wide character string, passed in via the
"size_t n" parameter, is set to zero, the function should only return
the required length for the destination wide character string. In this
case, it should *not* attempt to write to the destination, so the "dst"
parameter is permitted to be NULL.
However, when the internally called _collate_wxfrm() function returns an
error, such as when using the "C" locale, as a fallback wcscpy(3) or
wcsncpy(3) are used. But if the input length is zero, wcsncpy(3) will
be called with a length of -1! If the "dst" parameter is NULL, this
will immediately result in a segfault, or if "dst" is a valid pointer,
it will most likely result in unexpectedly overwritten memory.
Fix this by explicitly checking for an input length greater than zero,
before calling wcsncpy(3).
Note that a similar situation does not occur in strxfrm(3), the plain
character version of this function, as it uses strlcpy(3) for the error
case. The strlcpy(3) function does not write to the destination if the
input length is zero.
MFC after: 1 week
The limit of the name in fileargs is twice the size of the MAXPATH.
The nvlist will not add an element with the longer name.
We can detect at this point that the path is too big, and simple return
the same error as open(2) would.
PR: 239700
Reported by: markj
Tested by: markj
MFC after: 2 weeks
Similar to what was done for device_printfs in r347229.
Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an
sbuf; documented in g_bio.9.
Reviewed by: markj
Discussed with: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21165
The API is used to gracefully terminate text line(s) with a single \n. If
the formatted buffer was empty or already ended in \n, it is unmodified.
Otherwise, a newline character is appended to it. The API, like other
sbuf-modifying routines, is only valid while the sbuf is not FINISHED.
Reviewed by: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21030
Code flow was somewhat difficult to read due to the combination of
multiple return sites and the 4x possible dynamic constructions of an
sbuf. (Future consideration: do we need all 4?) Refactored slightly to
improve legibility.
No functional change.
Sponsored by: Dell EMC Isilon
The goal is to avoid some kinds of low-memory deadlock when formatting
heap-allocated buffers.
Reviewed by: vangyzen
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21015
with Communication Device Class Ethernet Emulation Model (CDC EEM).
The driver supports both the device, and host side operation; there
is a new USB template (#11) for the former.
This enables communication with virtual USB NIC provided by iLO 5,
as found in new HPE Proliant servers.
Reviewed by: hselasky
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Hewlett Packard Enterprise
Make a note in the newfs.8 manual page to update the first backup
superblock location when changing the default fragment size for
the filesystem.
Reported by: O. Hartmann
Adjust argc and argv by optind before using them. This slightly
simplifies the code. No functional change intended.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21079
Don't mark nvme as broken on aarch64. It compiles, at least, and people are
testing it out. This only enables the userland parts of the nvme stack.
Submitted by: greg at unrelenting technologies
Differential Revision: https://reviews.freebsd.org/D21168
It allows to read and write block descriptors alike to mode page parameters.
It allows to change block size or short-stroke HDDs or overprovision SSDs.
Depenting on -P parameter the change can be either persistent or till reset.
In case of block size change device may need reformat after the setting.
In case of SSD overprovisioning format or sanitize may be needed to really
free the flash.
During implementation appeared that csio_encode_visit() can not handle
integers of more then 4 bytes, that makes 8-byte LBA handling awkward.
I had to split it into two 4-byte halves now.
MFC after: 1 week
Relnotes: yes
Sponsored by: iXsystems, Inc.
Some hardware needs more than 32, bump this value.
We cannot use the _alloc for of getencprop as this function is called
too early in the boot before pmap is initialized and we only have
2k of stack when cninit is called.
Discussed with: ian
