Add a wrapping script to use ATF to run tests written with Googletest
one by one. This helps locating and tracking the failing case in CI easier.
This is a temporarily solution while Googletest support in Kyua is developing.
We will revert this once Kyua+Googletest integration is ready.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25896
This is a workaround for the current continuously failing test case
sys.kern.sonewconn_overflow.sonewconn_overflow_01
The side effect is the dmesg buffer got cleared and may effect other tests
depends on dmesg output running in parallel. The better solution would be
tailing the log file like /var/log/debug.log
Sponsored by: The FreeBSD Foundation
r364166 converted echo -n `/bin/pwd` to a raw pwd invocation, leaving a
trailing newline at the end of path. This caused a later stat() of it to
erroneously fail and the fallback to MK_AUTO_OBJ=no logic proceeded as
unexpected.
Harry Schmalzbauer bissected the resulting build failure he experienced
(stable/12 host, -HEAD build) down to r365887. This change is mostly
unrelated, except it switches the build to bootstrapped crunchgen - clue!
I then bissected recent crunchgen changes going back a bit since we wouldn't
observe the failure immediately with -CURRENT in most configurations, which
landed me on r364166. After many intense head-scratching minutes and printf
debugging, I realized that the newline was the difference. This is where our
tale ends.
Reported by: Harry Schmalzbauer, O. Hartmann, Mike Tancsa, kevans
MFC after: 3 days
Add an "nextnoskip" sysctl that allows for listing of sysctls intended to be
normally skipped for cost reasons.
This makes it so the names/descriptions of those sysctls can be discovered with
sysctl -aN/sysctl -ad/sysctl -at.
It also makes it so children are visited when a node flagged with CTLFLAG_SKIP
is explicitly requested.
The intended use case is to mark the root "kstat" node with CTLFLAG_SKIP so that
the extensive and expensive stats are skipped by default but may still be easily
obtained without having to know them all (which may not even be possible) and
request each one-by-one.
Reviewed by: jhb
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D26560
This is described in RealTek's driver as a "RTL8168 Series add-on card."
PR: 250037
Submitted by: Hiroshi HASEGAWA <hhase1973@gmail.com>
MFC after: 1 week
Since the code exits smr section prior to calling pwd_hold, the used
pwd can be freed and a new one allocated with the same address, making
the comparison erroneously true.
Note it is very unlikely anyone ran into it.
/dev/pf is usable in vnet jails, so don't hide the node there.
We shouldn't expose /dev/pf in regular jails, as that gives them control over
the host (or parent vnet jail) firewall.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D26537
switch ufs_stat() to use the same value for st_dev as was used by
the previous ufs_getattr() stat path.
Submitted by: gallatin
Reviewed by: mjg, imp, kib, mckusick
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26596
* Add some examples showing binary, arguments and file info from living
processes.
* Show information from core dumps including an attempt using an old core file.
* While here, fix warning 'no blank before trailing delimiter' reported by igor.
Approved by: manpages (0mp@)
Differential Revision: https://reviews.freebsd.org/D25467
Add a dozen of examples to the EXAMPLES section for pgrep(1) and pkill(1).
Flags covered: -f, -F, -n, -j, -l, -S, -x
Approved by: mandoc (bcr@)
Differential Revision: pkill(1): Add EXAMPLES section to man page
* Add EXAMPLES section with four simple examples.
* Simplify -H flag description. This makes easy to see the difference between
this flag and -h
* While here, fix .Tn deprecated macro.
Approved by: manpages (bcr@)
Differential Revision: https://reviews.freebsd.org/D26662
* Add small EXAMPLES section to the man page showing the different
flags and exit codes.
* Complete description for -v flag.
Approved by: manpages (bcr@)
In the previous world order, any brand/logo was forced to pull in the
drawer and call drawer.add{Brand,Logo} with the name their brand/logo is
taking and a table describing it.
In the new world order, these files just need to return a table that maps
out graphics types to a table of the exact same format as what was
previously being passed back into the drawer. The appeal here is not needing
to grab a reference back to the drawer module and having a cleaner
data-driven looking format for these. The format has been renamed to 'gfx-*'
prefixes and each one can provide a logo and a brand.
drawer.addBrand/drawer.addLogo will remain in place until FreeBSD 13, as
there's no overhead to them and it's not yet worth the break in
compatibility with any pre-existing brands and logos.
Reviewed by: freqlabs
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D24966
Dynamically created OIDs automatically get this flag set.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D26561
The output of "ngctl dot" is suitable for small netgraph networks. Even
moderate complex netgraph setups (about a dozen nodes) are hard to
understand from the .dot output, because each node and each hook are shown
as a full blown structure.
This patch allows to generate much more compact output and graphs by
omitting the extra structures for the individual hooks. Instead the names of
the hooks are labels to the edges.
Submitted by: Lutz Donnerhacke <lutz_donnerhacke.de>
Reviewed by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21965
It gives the answer would the thread sleep according to current state
of signals and suspensions. Of course the answer is racy and allows
for false-negatives (no sleep when signal is delivered after process
lock is dropped). Also the answer might change due to signal
rescheduling among threads in multi-threaded process.
Still it is the best approximation I can provide, to answering the
question was the thread interrupted.
Reviewed by: markj
Tested by: pho, rmacklem
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D26628
- Extract suspension check into sig_ast_checksusp() helper.
- Extract signal check and calculation of the interruption errno into
sig_ast_needsigchk() helper.
The helpers are moved to kern_sig.c which is the proper place for
signal-related code.
Improve control flow in sleepq_catch_signals(), to handle ret == 0
(can sleep) and ret != 0 (interrupted) only once, by separating
checking code into sleepq_check_ast_sq_locked(), which return value is
interpreted at single location.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D26628
Nexthop lookup was not consireding rt_flags when doing
structure comparison, which lead to an original nexthop
selection when changing flags. Fix the case by adding
rt_flags field into comparison and rearranging nhop_priv
fields to allow for efficient matching.
Fix `route change X/Y flags` case - recent changes
disallowed specifying RTF_GATEWAY flag without actual gateway.
It turns out, route(8) fills in RTF_GATEWAY by default, unless
-interface flag is specified. Fix regression by clearing
RTF_GATEWAY flag instead of failing.
Fix route flag reporting in RTM_CHANGE messages by explicitly
updating rtm_flags after operation competion.
Add IPv4/IPv6 tests for flag-only route changes.
If current process is 64bit, use rex-prefixed version of XSAVE
(XSAVE64). If current process is 32bit and CPU supports saving
segment registers cs/ds in the FPU save area, use non-prefixed variant
of XSAVE.
Reported and tested by: Michał Górny <mgorny@mgorny@moritz.systems>
PR: 250043
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26643
After r354889 stack got struct nmi_pcpu at top, which makes IST top
not page-aligned. Since pmap_pti_add_kva() truncates/rounds up
addresses, it erronously entered a page mapped before double fault
stack into the pti page table.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
VirtFS allows sharing an arbitrary directory tree between bhyve virtual
machine and the host. Current implementation has a fairly complete support
for 9P2000.L protocol, except for the extended attribute support. It has
been verified to work with the qemu-kvm hypervisor.
Reviewed by: rgrimes, emaste, jhb, trasz
Approved by: trasz (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: Conclusive Engineering (development), vStack.com (funding)
Differential Revision: https://reviews.freebsd.org/D10335
