(See commit log for usr.bin/xlint/Makefile,v 1.11 for what was wrong
with enabling build of lint libraries in rev. 1.12.)
This fixes cross-arch compiles (running binaries for a different arch
when generating lint.7 and lint libraries) and cross-branch compiles
(4.x -> 5.0 buildworld should be working again).
"env name=value ... cmd ..." was just a pessimized way of doing
"name=value ... cmd ...". Note that make(1) can't optimize
either of these to an exec of env(1) or "cmd" even if the second
"..." is simple, since it can't tell that the shell metacharacter
in "name=value" is actually handled by env(1).
Use this where we are now using /etc/make.conf.
This allows people to override the current default of always including
/etc/make.conf. Setting __MAKE_CONF to /dev/null disables it
completely, while setting it to something else allows one to override
what is on the system. This can be desirable in situations where a
machine has many users and some of them want different defaults, or
defaults appropriate to cross building to be different than those for
normal building.
Not objected to by: arch@
lint, so this is turned off by default. Setting WANT_LINT will turn
on generation of lint libraries for /usr/libdata/lint/*.ln.
Reviewd by: silence in -audit.
* Document the LOCAL_SCRIPT option.
* Document the NOPORTREADMES option.
* Be more specific in a comment.
* Be more specific about the ftp.1 and cdrom.1 targets.
* Clarify the usage of the CVSROOT variable.
* Clarify the usage of the NODOC variable.
Suggested by: matusita
about the TARGET_ARCH variable. (1)
Add information about the DESTDIR variable.
Add more examples for cross-building.
(1) Submitted by: ru
MFC after: 3 days
* Remove trailing whitespace at EOL.
* Various grammar cleanups.
* Note that MAKE_ISOS is disabled by default.
* Use more descriptive mdoc markup.
* Use proper references for the online FDP documents.
Submitted by: dd
Specifically, this documents the available targets and relevant
environment variables for "make release". LOCAL_PATCHES,
RELEASEDISTFILES, RELEASENOUPDATE, etc.. are covered.
A future commit should add more information about drivers.conf,
boot_crunch.conf, and other less well-known aspects of the release
build.
Reviewed and history section added by: phk
argument. Don't fail silently, but let savecore(8) make noise. It
won't behave badly, it doesn't need protection.
At the same time, allow the administrator to have dumpdev enabled
while dumpdir (savecore(8)) is disabled and document how to do it.
PR: conf/35725
install PicoBSD on hard disks and CDROM images, and on the
bootstrap sequence and the places where you can customise
a PicoBSD image.
Now if some of the -doc guys want to put this stuff in a nice
handbook page, that would be extremely useful!
{kerberos,kadmind}_enable to {kerberos,kadmind}4_enable to match
reality. Fix some mismatched parentheses while I'm here.
PR: 34982
Submitted by: Michel Oosterhof <m.oosterhof@xs4all.nl>
via sysctl's. The old #defines, MAX_GIF_NEST and XBONEHACK are
currently supported for backwards compatability, but will probably be
removed at some point in the future.
to pick up the correct cross-tools (the compiler executables and binutils)
and special linker files (crt*.o). This is now controlled by a single knob,
TOOLS_PREFIX, when building cross-tools.
Fixed regression in Makefile.inc1,v 1.203 (-nostdinc). This clobbered target
architecture's CFLAGS with building host's CPUTYPE setting in /etc/make.conf,
and had a nice but nasty side effect of exposing some (normally hidden) bugs
in system headers.
(Attempt to move the "-nostdinc -I..." part of CFLAGS into the new CINCLUDES
(modeled after a similar CXXINCLUDES) eventually failed because hard-coding
${WORLDTMP}/usr/include to be the first in the include list does not always
work, e.g. lib/libbind.)
Compensate the -nostdinc removal by making cpp(1) built in the cross-tools
stage to not look for <> header files in the building host's /usr/include
(already committed as gnu/usr.bin/cc/cc_tools/freebsd-native.h, revisions
1.10-1.12, STANDARD_INCLUDE_DIR).
: $ /usr/obj/usr/src/i386/usr/bin/cpp -v /dev/null
:
: Before:
:
: #include <...> search starts here:
: /usr/obj/usr/src/i386/usr/include
: /usr/include
: End of search list.
:
: After:
:
: #include <...> search starts here:
: /usr/obj/usr/src/i386/usr/include
: /usr/obj/usr/src/i386/usr/include
(Disabling the use of GCC_INCLUDE_DIR in the FREEBSD_NATIVE case would fix
the duplicate above.)
Get rid of the (now unneeded) -I${DESTDIR}/usr/include magic in bsd.prog.mk
and bsd.lib.mk. Finish the removal of LDDESTDIR in bsd.lib.mk,v 1.55 -- we
no longer have users of it.
The required changes to gcc were already committed as contrib/gcc.295/gcc.c,
revisions 1.23 and 1.24.
Basically, this allows for the changes above plus makes gcc(1) persistent
about path configuration, whether it's configured as a native or a cross
compiler:
: $ /usr/obj/usr/src/i386/usr/bin/cc -print-search-dirs
: install: /usr/obj/usr/src/i386/usr/libexec/(null)
: programs: /usr/obj/usr/src/i386/usr/libexec/elf/:/usr/obj/usr/src/i386/usr/libexec/
: libraries: /usr/obj/usr/src/i386/usr/lib/
:
: $ /usr/obj/alpha/usr/src/i386/usr/bin/cc -print-search-dirs
: install: /usr/obj/alpha/usr/src/i386/usr/libexec/(null)
: programs: /usr/obj/alpha/usr/src/i386/usr/libexec/elf/:/usr/obj/alpha/usr/src/i386/usr/libexec/
: libraries: /usr/obj/alpha/usr/src/i386/usr/lib/
Reviewed by: bde, obrien
when running natd(8) out of the rc-files. It is perfectly valid for
the interface or alias address to be set in a natd(8) configuration
file, not on the command line. Also, loosen up the restrictions on
identifying an IP address argument in 'natd_interface.'
Fix the documentation, rc.conf(5), to reflect this change.
Take the bogus default for 'natd_interface' out of /etc/defaults/rc.conf.
MFC after: 3 days
at boot (sendmail_enable=NO), a localhost-only daemon may started
(sendmail_submit_enable) as it is needed to accept mail from command line
submissions. If this isn't desired, see etc/mail/README for more hints.
Optionally (sendmail_msp_queue_enable) start a queue runner for the
submission queue in case a daemon isn't available to accept command line
submitted mail at submission time.
Note that the syslog labels for all of these sendmail processes have been
uniquified for easier log parsing.
the structure definitions come from NetBSD to make it easier to share card
definitions. The driver only acts as a shim between the pci bus and the
sio driver. Later pci parallel ports could also be supported through this
driver. Support for most single and multiport pci serial cards should be
as simple as adding its definition to pucdata.c
Tested with the following pci cards:
Moxa Industio CP-114, 4 port RS-232,RS-422/485
Syba Tech Ltd. PCI-4S2P-550-ECP, 4 port RS-232 + 2 parallel ports
Netmos NM9835 PCI-2S-550, 2 port RS-232
descriptors. This simplifies code for jumbo frames.
- Cleaned up coding conventions to make code more unix-like.
- Cleaned up code in if_em_fxhw.c and if_em_phy.c.
Added relevant comments.
MFC after: 1 week
- explictly say not to edit infrastructure for vendor ids (not just the
ids).
- say to enclose vendor ids and their infrastucture in ``#if 0'', and
partly explain why.
- don't set a bad example by mangling the Berkeley id infrastructure from
``static char sccsid[] ...'' to ``__RCSID(...)''.
- show a blank line between the vendor id cruft and the FreeeBSD if cruft
in the example.
- relaxed the rule about adding "From: " to say that "From: " is actually
useful if the file has been renamed.
- minor English improvements.
Discussed with: obrien
/usr/share/examples/pppd.
Update pppd(8) documentation to reflect this, usr.sbin/pppd/pppd.8.
Remove the out-of-place pppd(8) configuration files in etc/ppp,
ppp.shells.sample and ppp.deny.
Make the appropriate changes to the build process, etc/Makefile and
etc/mtree/BSD.usr.mtree, so it all works.
The files from etc/ppp, ppp.shells.sample and ppp.deny, were moved
with a repo copy. Note it in the logs with a forced commit to these
two.
Submitted by: Maxim Konovalov <maxim@macomnet.ru> provided the new samples.
uhub.c: revision 1.37
usb.4: revision 1.30
usb.c: revision 1.38
usb.h: revision 1.40
usb_port.h: revision 1.21
usb_subr.c: revision 1.65
usbdi.h: revision 1.40
Split the attach/detach events up into device, driver and controller
attach and detach events.
The commit message from NetBSD was:
date: 2000/02/02 07:34:00; author: augustss; state: Exp;
Change the USB event mechanism to include more information
about devices and drivers. Partly from FreeBSD.
Also rework usbd to take these new event types into account.
Try this out in -CURRENT, MFC, and then consider dropping the
'log_in_vain' knob all together. It really is something for
sysctl.conf(5).
PR: bin/32953
Reviewed by: -bugs discussion
MFC after: 1 week
some content and layout changes were made.
lock.9 had existed before but was never added to Makefile, so it was
never installed. That is why the duplicate files were created in the
first place.
Reviewed by: ru, alfred
- Spam /usr/lib some more by making libssh a standard library.
- Tweak ${LIBPAM} and ${MINUSLPAM}.
- Garbage collect unused libssh_pic.a.
- Add fake -lz dependency to secure/ makefiles needed for
dynamic linkage with -lssh.
Reviewed by: des, markm
Approved by: markm
but those maps also used as backward maps for Paste, so space becomes mapped
to last non-existen character on Paste as result.
Fix it by mapping non-existen characters to another non-existen one, i.e. to
0x00, so unused 0x00 can be backward-mapped to some junk without real harm.
Pointed by: Alexander Kabaev <ak03@gte.com>
socket so that routing daemons and other interested parties
know when an interface is attached/detached.
PR: kern/33747
Obtained from: NetBSD
MFC after: 2 weeks
One to notify the system that the MTU for VLAN can be 1500 so the vlan
will automatically be configured with a 1500 MTU the other is to ignore
the error case if the received frame is to long.
The frame size notification came from code in the SIS driver, and
the support for long frames derived from the NetBSD Tulip driver.
Tested on: 4 port D-Link adapter DFE-570TX 4 Intel 21143
Netgear card with 82c169 PNIC 10/100BaseTX
Reviewed by: ru (manpage), wpaul (not objected to), archie
Approved by: imp
Obtained from: NetBSD
Clarify comment about kind of color emulators for which vt*-co* entries
are for and about saving space.
Use direct \E[m instead of ...;m for dumb emulators.
(at least a new one) would expect the manual page to be called (even
if the device is lo#).
PR: 32453
Submitted by: Gary W. Swearingen <swear@blarg.net>
o Combine ufs.7 and ffs.7 into a single ffs.7 man page.
o Remove all references to `ufs' as a file system.
o Proper (lack of) capitalization for `ffs'.
Obtained from: TrustedBSD Project
Sposnored by: DARPA, NAI Labs
types (networkfs_types) with a version that includes the original
list.
This increases the scope for user error and also means that systems with
networkfs_types set in /etc/rc.conf will not benefit from changes to the
list in /etc/defaults/rc.conf on upgrade.
Instead, store the default list in /etc/rc itself and allow the operator
to append to that list by specifying her own list in networkfs_types.
Rename networkfs_types to extra_netfs_types accordingly, as the new name
better describes the purpose of the variable. Default the value to
'NO'.
