use by ABI emulators.
- Alter the interface of kern_recvit() somewhat. Specifically, go ahead
and hard code UIO_USERSPACE in the uio as that's what all the callers
specify. In place, add a new uioseg to indicate what type of pointer
is in mp->msg_name. Previously it was always a userland address, but
ABI emulators may pass in kernel-side sockaddrs. Also, remove the
namelenp field and instead require the two places that used it to
explicitly copy mp->msg_namelen out to userland.
- Use the patched kern_recvit() to replace svr4_recvit() and the stock
kern_sendit() to replace svr4_sendit().
- Use kern_bind() instead of stackgap use in ti_bind().
- Use kern_getpeername() and kern_getsockname() instead of stackgap in
svr4_stream_ti_ioctl().
- Use kern_connect() instead of stackgap in svr4_do_putmsg().
- Use kern_getpeername() and kern_accept() instead of stackgap in
svr4_do_getmsg().
- Retire the stackgap from SVR4 compat as it is no longer used.
that the 'data' pointer is already setup to point to a valid KVM buffer
or contains the copied-in data from userland as appropriate (ioctl(2)
still does this). kern_ioctl() takes care of looking up a file pointer,
implementing FIONCLEX and FIOCLEX, and calling fi_ioctl().
- Use kern_ioctl() to implement xenix_rdchk() instead of using the stackgap
and mark xenix_rdchk() MPSAFE.
mostly consists of pushing a few copyin's and copyout's up into
__semctl() as all the other callers were already doing the UIO_SYSSPACE
case. This also changes kern_semctl() to set the return value in a passed
in pointer to a register_t rather than td->td_retval[0] directly so that
callers can only set td->td_retval[0] if all the various copyout's succeed.
As a result of these changes, kern_semctl() no longer does copyin/copyout
(except for GETALL/SETALL) so simplify the locking to acquire the semakptr
mutex before the MAC check and hold it all the way until the end of the
big switch statement. The GETALL/SETALL cases have to temporarily drop it
while they do copyin/malloc and copyout. Also, simplify the SETALL case to
remove handling for a non-existent race condition.
to use the hinted child system. Bus drivers that use this need to
implmenet the bus_hinted_child method, where they actually add the
child to their bus, as they see fit. The bus is repsonsible for
getting the attribtues for the child, adding it in the right order,
etc. ISA hinting will be updated to use this method.
MFC After: 3 days
subr_acl_posix1e.c, leaving kern_acl.c containing only ACL system
calls and utility routines common across ACL types.
Add subr_acl_posix1e.c to the build.
Obtained from: TrustedBSD Project
not all known to be MPSAFE yet.
- Actually remove Giant from the kernel linker by taking it out of the
KLD_LOCK() and KLD_UNLOCK() macros.
Pointy hat to: jhb (2)
ibcs2_[gs]etgroups() rather than using the stackgap. This also makes
ibcs2_[gs]etgroups() MPSAFE. Also, it cleans up one bit of weirdness in
the old setgroups() where it allocated an entire credential just so it had
a place to copy the group list into. Now setgroups just allocates a
NGROUPS_MAX array on the stack that it copies into and then passes to
kern_setgroups().
a local 'semid' variable which was the array index and used uap->semid
as the original IPC id. During the kern_semctl() conversion those two
variables were collapsed into a single 'semid' variable breaking the
places that needed the original IPC ID. To fix, add a new 'semidx'
variable to hold the array index and leave 'semid' unmolested as the IPC
id. While I'm here, explicitly document that the (undocumented, at least
in semctl(2)) SEM_STAT command curiously expects an array index in the
'semid' parameter rather than an IPC id.
Submitted by: maxim
to a copied-in copy of the 'union semun' and a uioseg to indicate which
memory space the 'buf' pointer of the union points to. This is then used
in linux_semctl() and svr4_sys_semctl() to eliminate use of the stackgap.
- Mark linux_ipc() and svr4_sys_semsys() MPSAFE.
from going away. mount(2) is now MPSAFE.
- Expand the scope of Giant some in unmount(2) to protect the mp structure
(or rather, to handle concurrent unmount races) from going away.
umount(2) is now MPSAFE, as well as linux_umount() and linux_oldumount().
- nmount(2) and linux_mount() were already MPSAFE.
- For privileged processes safe two mutex operations.
We may want to consider if this is good idea to use SUSER_ALLOWJAIL here,
but for now I didn't wanted to change the original behaviour.
Reviewed by: rwatson
all of the module event handlers are MP safe yet, so always acquire Giant
for now when invoking module event handlers. Eventually we can add an
MPSAFE flag or some such and add appropriate locking to all module event
handlers.
in 1999, and there are changes to the sysctl names compared to PR,
according to that discussion. The description is in sys/conf/NOTES.
Lines in the GENERIC files are added in commented-out form.
I'll attach the test script I've used to PR.
PR: kern/14584
Submitted by: babkin
protect all linker-related data structures including the contents of
linker file objects and the any linker class data as well. Considering how
rarely the linker is used I just went with the simple solution of
single-threading the whole thing rather than expending a lot of effor on
something more fine-grained and complex. Giant is still explicitly
acquired while registering and deregistering sysctl's as well as in the
elf linker class while calling kmupetext(). The rest of the linker runs
without Giant unless it has to acquire Giant while loading files from a
non-MPSAFE filesystem.
- Add a new function linker_release_module() as a more intuitive complement
to linker_reference_module() that wraps linker_file_unload().
linker_release_module() can either take the module name and version info
passed to linker_reference_module() or it can accept the linker file
object returned by linker_reference_module().
file objects calling a user-specified predicate function on each object.
The iteration terminates either when the entire list has been iterated
over or the predicate function returns a non-zero value.
linker_file_foreach() returns the value returned by the last invocation
of the predicate function. It also accepts a void * context pointer that
is passed to the predicate function as well. Using an iterator function
avoids exposing linker internals to the rest of the kernel making locking
simpler.
- Use linker_file_foreach() instead of walking the list of linker files
manually to lookup ndis files in ndis(4).
- Use linker_file_foreach() to implement linker_hwpmc_list_objects().
in setsockopt so that they can be compared correctly against negative
values. Passing in a negative value had a rather negative effect
on our socket code, making it impossible to open new sockets.
PR: 98858
Submitted by: James.Juran@baesystems.com
MFC after: 1 week
It is similar to debug.kdb.trap, except for it tries to cause a page fault
via a call to an invalid pointer. This can highlight differences between
a fault on data access vs. a fault on code call some CPUs might have.
This appeared as a test for a work \
Sponsored by: RiNet (Cronyx Plus LLC)
basically always violated) invariannts of soreceive(), which assume
that the first mbuf pointer in a receive socket buffer can't change
while the SB_LOCK sleepable lock is held on the socket buffer,
which is precisely what these functions do. No current protocols
invoke these functions, and removing them will help discourage them
from ever being used. I should have removed them years ago, but
lost track of it.
MFC after: 1 week
Prodded almost by accident by: peter
frequency, quality and current value of each available time counter.
At the moment all of these are read-only, but it might make sense to
make some of these read-write in the future.
MFC after: 3 months
filesystem agnostic. We are not touching any file system specific functions
in this code path. Since we have a cache lock, there is really no need to
keep Giant around here.
This eliminates Giant acquisitions for any syscall which is auditing pathnames.
Discussed with: jeff
yield() and sched_yield() syscalls. Every scheduler has its own way
to relinquish cpu, the ULE and CORE schedulers have two internal run-
queues, a timesharing thread which calls yield() syscall should be
moved to inactive queue.
KASSERT(ke->ke_runq == NULL) panic when the sched_add is recursively
called by maybe_preempt.
Reported by: Wojciech A. Koszek < dunstan at freebsd dot czest dot pl >
we intend for the user to be able to unload them later via kldunload(2)
instead of calling linker_load_module() and then directly adjusting the
ref count on the linker file structure. This makes the resulting
consumer code simpler and cleaner and better hides the linker internals
making it possible to sanely lock the linker.
Giant down in it.
- Push Giant down in kern_kldunload() and reorganize it slightly to avoid
using gotos. Also, expose this function to the rest of the kernel.
- Use a 'struct kld_file_stat' on the stack to read data under the lock
and then do one copyout() w/o holding the lock at the end to push the
data out to userland.
linker_file_unload() instead of in the middle of a bunch of code for
the case of dropping the last reference to improve readability and sanity.
While I'm here, remove pointless goto's that were just jumping to a
return statement.
sockets:
1) A sender sends SCM_CREDS message to a reciever, struct cmsgcred;
2) A reciever sets LOCAL_CREDS socket option and gets sender
credentials in control message, struct sockcred.
Both methods use the same control message type SCM_CREDS with the
same control message level SOL_SOCKET, so they are indistinguishable
for the receiver. A difference in struct cmsgcred and struct sockcred
layouts may lead to unwanted effects.
Now for sockets with LOCAL_CREDS option remove all previous linked
SCM_CREDS control messages and then add a control message with
struct sockcred so the process specifically asked for the peer
credentials by LOCAL_CREDS option always gets struct sockcred.
PR: kern/90800
Submitted by: Andrey Simonenko
Regres. tests: tools/regression/sockets/unix_cmsg/
MFC after: 1 month
I picked it up again. The scheduler is forked from ULE, but the
algorithm to detect an interactive process is almost completely
different with ULE, it comes from Linux paper "Understanding the
Linux 2.6.8.1 CPU Scheduler", although I still use same word
"score" as a priority boost in ULE scheduler.
Briefly, the scheduler has following characteristic:
1. Timesharing process's nice value is seriously respected,
timeslice and interaction detecting algorithm are based
on nice value.
2. per-cpu scheduling queue and load balancing.
3. O(1) scheduling.
4. Some cpu affinity code in wakeup path.
5. Support POSIX SCHED_FIFO and SCHED_RR.
Unlike scheduler 4BSD and ULE which using fuzzy RQ_PPQ, the scheduler
uses 256 priority queues. Unlike ULE which using pull and push, the
scheduelr uses pull method, the main reason is to let relative idle
cpu do the work, but current the whole scheduler is protected by the
big sched_lock, so the benefit is not visible, it really can be worse
than nothing because all other cpu are locked out when we are doing
balancing work, which the 4BSD scheduelr does not have this problem.
The scheduler does not support hyperthreading very well, in fact,
the scheduler does not make the difference between physical CPU and
logical CPU, this should be improved in feature. The scheduler has
priority inversion problem on MP machine, it is not good for
realtime scheduling, it can cause realtime process starving.
As a result, it seems the MySQL super-smack runs better on my
Pentium-D machine when using libthr, despite on UP or SMP kernel.
with firmware_unregister(). Previously when the last driver reference
had been dropped we would clear the list entry under the assumption
that the firmware module was about to be unloaded, but this was not
true if the firmware image had been loaded manually with kldload.
This makes it possible to manually kldload firmware images as a
workaround for drivers such as ipw that attempt to load firmware
while resuming after a suspend.
Reviewed by: mlaier (an earlier version of the patch)
- Move sonewconn(), which creates new sockets for incoming connections on
listen sockets, so that all socket allocate code is together in
uipc_socket.c.
- Move 'maxsockets' and associated sysctls to uipc_socket.c with the
socket allocation code.
- Move kern.ipc sysctl node to uipc_socket.c, add a SYSCTL_DECL() for it
to sysctl.h and remove lots of scattered implementations in various
IPC modules.
- Sort sodealloc() after soalloc() in uipc_socket.c for dependency order
reasons. Statisticize soalloc() and sodealloc() as they are now
required only in uipc_socket.c, and are internal to the socket
implementation.
After this change, socket allocation and deallocation is entirely
centralized in one file, and uipc_socket2.c consists entirely of socket
buffer manipulation and default protocol switch functions.
MFC after: 1 month
non-intuitive for the ~ to be built into the mask. All the users now
explicitly ~ the mask. In addition, add MTX_UNOWNED to the mask even
though it technically isn't a flag. This should unbreak mtx_owner().
Quickly spotted by: kris
forget to unbusy file system before its destruction.
This fixes the following warning on mount failure:
Mount point <X> had 1 dangling refs
Tested by: wkoszek
a) were incorrectly written and therefore never compiled into
assertions, and
b) were incorrectly specified and when compiled resulted in a
failed assertion.
vmspace_exitfree() and vmspace_free() which could result in the same
vmspace being freed twice.
Factor out part of exit1() into new function vmspace_exit(). Attach
to vmspace0 to allow old vmspace to be freed earlier.
Add new function, vmspace_acquire_ref(), for obtaining a vmspace
reference for a vmspace belonging to another process. Avoid changing
vmspace refcount from 0 to 1 since that could also lead to the same
vmspace being freed twice.
Change vmtotal() and swapout_procs() to use vmspace_acquire_ref().
Reviewed by: alc
lookup, rename, strategy, islocked
The missing % sign meant that the lines were processed as plain
comments and the corresponding assertions were never generated.
This used to make syscons switch to vty0 when we entered DDB but this
was lost in the KDB shuffle. We may want to bring it back down the road
but it should be done by calling cn_init_t/cn_term_t instead, possibly
with a flag argument saying "Debugger!"
sendfile(). This causes sendfile() to use the file descriptor
reference to the socket instead of bumping the socket reference
count, which avoids an additional refcount operation, as well as a
potential expensive socket refcount drop, which can lead to
contention on the accept mutex. This change also has the side
effect of further reducing the number of cases where an in-progress
I/O operation can occur on a socket after close, as using the file
descriptor refcount prevents the socket from closing while in use.
MFC after: 3 months
If B_NOCACHE is set the pages of vm backed buffers will be invalidated.
However clean buffers can be backed by dirty VM pages so invalidating them
can lead to data loss.
Add support for flush dirty page in the data invalidation function
of some network file systems.
This fixes data losses during vnode recycling (and other code paths
using invalbuf(*,V_SAVE,*,*)) for data written using an mmaped file.
Collaborative effort by: jhb@,mohans@,peter@,ps@,ups@
Reviewed by: tegge@
MFC after: 7 days
stopped before adjusting their priority and setting them on the run
q so they cannot race for resources (pointed out by njl).
While here add a console printf on thread create fails; otherwise
noone may notice (e.g. return value is always 0 and caller has no
way to verify).
Reviewed by: jhb, scottl
MFC after: 2 weeks
mount(2) system call:
* Add cmount hook to fdescfs and pseudofs (and, by extension, procfs and
linprocfs). This (mostly) restores the ability to mount these
filesystems using the old mount(2) system call (see below for the
rest of the fix).
* Remove not-NULL check for the data argument from the mount(2) entry
point. Per the mount(2) man page, it is up to the individual
filesystem being mounted to verify data. Or, in the case of procfs,
etc. the filesystem is free to ignore the data parameter if it does
not use it. Enforcing data to be not-NULL in the mount(2) system call
entry point prevented passing NULL to filesystems which ignored the
data pointer value. Apparently, passing NULL was common practice
in such cases, as even our own mount_std(8) used to do it in the
pre-nmount(2) world.
All userland programs in the tree were converted to nmount(2) long ago,
but I've found at least one external program which broke due to this
(presumably unintentional) mount(2) API change. One could argue that
external programs should also be converted to nmount(2), but then there
isn't much point in keeping the mount(2) interface for backward
compatibility if it isn't backward compatible.
When porting FreeBSD to a new platform, one of the more useful things to do is
get mi_startup() to let you know which SYSINIT it's up to. Most people tend to
whack a printf in the SYSINIT loop to print the address of the function it's
about to call. Going one better, jhb made a version that uses DDB to look up
the name of the function and print that instead. This version is essentially
his with the addition of some ifdeffery to make it optional and to allow it to
work (although using only the function address, not the symbol) if you forgot
to enable DDB.
All the cool bits by: jhb
Approved by: scottl, rink, cognet, imp
vn_start_write() is always called earlier in the code path and calling
the function recursively may lead to a deadlock.
Confirmed by: tegge
MFC after: 2 weeks
vn_finished_write() should also be called only then.
BTW. I fixed two functions here: vn_rdwr() and vn_write(). The latter seems
to be unused.
MFC after: 3 weeks
buffers to go on the buf daemon's DIRTYGIANT queue.
- Set BO_NEEDSGIANT on ffs's devvp since the ffs_copyonwrite handler
runs in the context of the buf daemon and may require Giant.
than trying to optimize it into a single lock. This adds more calls to
lock giant with non smpsafe filesystems but is the only way to reliably
hold the correct lock.
- Remove an invalid assert in the mountedhere case in lookup and fix the
code to properly deal with the scenario. We can actually have a lookup
that returns dp == dvp with mountedhere set with certain unmount races.
Tested by: kris
Reported by: kris/mohans
problems in ddb:
- "show threadchain [thread]" will start with the specified thread (or the
current kdb thread by default) and show it's state. If it is blocked on
a lock, it will find the owner of the lock and show its state, etc.
- "show allchains" will find all of the threads that are blocked on a
lock (but do not have any threads blocked on a lock they hold) and show
the resulting thread chain.
- "show lockchain <lock>" takes a pointer to a lock_object (such as a
mutex or rwlock). If there is a turnstile for that lock, then it will
display all the threads blocked on the lock. In addition, for each
thread blocked on the lock, it will display any contested locks they
hold, and recurse on those locks to show any threads blocked on those
locks, etc.
file lock, in the style of fgetsock().
Modify accept1() to use getsock() instead of fgetsock(), relying on the
file descriptor reference rather than an acquired socket reference to
prevent the listen socket from being destroyed during accept(). This
avoids additional reference count operations, which should improve
performance, and also avoids accept1() operating on a socket whose file
descriptor has been torn down, which may have resulted in protocol
shutdown starting.
MFC after: 3 months
function along with the remainder of the reference checking code. Move
comment from body to header with remainder of comments. Inclusion of a
socket in a completed connection queue counts as a true reference, and
should not be handled as an under-documented edge case.
MFC after: 3 months
