Modern ARM systems do not have an FPA unit but GDB reserves register
indices for FPA registers and expects the stub to know their sizes.
PR: 251022
Submitted by: Dmitry Salychev <dsl@mcusim.org>
MFC after: 2 weeks
to work with the pmu and tempmon nodes as well as the soc node. This allows
interrupts to work on the pmu and tempmon devices even though we don't have
a driver for the low-power gpc interrupt controller (which is not a problem
because we also don't have support for entering deep power-down modes where
it gets used).
Some imx6 drivers are being converted to use features that weren't available
when they were first written (such as accessing shared device registers via
the syscon pseudo-device), so imx6 custom kernels that reference those
devices will now need this infrastructure in place.
Attach after interrupt controllers, since the attach function tries to
set up an interrupt handler.
Check for the availability of the required firmware early in the attach
code (before allocating resources). If the firmware is not available, set
a static var to remember that, so that if the device is re-probed on later
passes it won't repeatedly try to attach and then complain again about
missing firmware.
Remove the port for aml8726.
Kernel config was removed in r346096 and this port was never migrated
to GENERIC.
It is also impossible to obtain such hardware nowadays.
Reviewed by: imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27281
Remove the port for rk30xx.
Kernel config was removed in r346096 and this port was never migrated
to GENERIC.
It is also impossible to obtain such hardware nowadays and this code
don't provide anything beside booting.
Reviewed by: imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27280
The arm configs that required it have been removed from the tree.
Removing this option makes the callout code easier to read and
discourages developers from adding new configs without eventtimer
drivers.
Reviewed by: ian, imp, mav
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27270
In case u-boot was compiled without video support set the PLL
to 432Mhz (which allow us to use most of the HDMI resolution for
tcon) and set it as the parent for the DE clock.
in sync with (most) other architectures. No functional changes.
Reviewed by: manu
Tested by: mmel
MFC after: 2 weeks
Sponsored by: EPSRC
Differential Revision: https://reviews.freebsd.org/D26604
Hiding this feature behind RB_VERBOSE is gratuitous. The tunable is enough
to limit its use to only those who explicitly request it.
Suggested by: kevans
Move dump_avail[] extern declaration and inlines into a new header
vm/vm_dumpset.h. This fixes default gcc build for mips.
Reviewed by: alc, scottph
Tested by: kevans (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26741
Push the root seed version to userspace through the VDSO page, if
the RANDOM_FENESTRASX algorithm is enabled. Otherwise, there is no
functional change. The mechanism can be disabled with
debug.fxrng_vdso_enable=0.
arc4random(3) obtains a pointer to the root seed version published by
the kernel in the shared page at allocation time. Like arc4random(9),
it maintains its own per-process copy of the seed version corresponding
to the root seed version at the time it last rekeyed. On read requests,
the process seed version is compared with the version published in the
shared page; if they do not match, arc4random(3) reseeds from the
kernel before providing generated output.
This change does not implement the FenestrasX concept of PCPU userspace
generators seeded from a per-process base generator. That change is
left for future discussion/work.
Reviewed by: kib (previous version)
Approved by: csprng (me -- only touching FXRNG here)
Differential Revision: https://reviews.freebsd.org/D22839
Now that config(8) has supported include for 19 years, transition to
including the NOTES files. include support didn't exist at the time,
nor did the envvar stuff recently added. Now that it does, eliminate
the building of LINT files by just including everything you need.
Note: This may cause conflicts with updating in some cases.
find sys -name LINT\* -rm
is suggested across this commit to remove the generated LINT
files.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D26540
The boot metadata (also referred to as modinfo, or preload metadata)
provides information about the size and location of the kernel,
pre-loaded modules, and other metadata (e.g. the EFI framebuffer) to be
consumed during by the kernel during early boot. It is encoded as a
series of type-length-value entries and is usually constructed by
loader(8) and passed to the kernel. It is also faked on some
architectures when booted by other means.
Although much of the module information is available via kldstat(8),
there is no easy way to debug the metadata in its entirety. Add some
routines to parse this data and allow it to be printed to the console
during early boot or output via a sysctl.
Since the output can be lengthly, printing to the console is gated
behind the debug.dump_modinfo_at_boot kenv variable as well as the
BOOTVERBOSE flag. The sysctl to print the metadata is named
debug.dump_modinfo.
Reviewed by: tsoome
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26687
It is unlikely, but possible, that an unrecognized or unsupported
relocation type is encountered while trying to load a kernel module. If
this occurs we should offer the symbol index as a hint to the user.
While here, fix some small style issues.
Reviewed by: markj, kib (amd64 part, in D26701)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
We have a few shortcuts in the arm trap code to speed up obvious "must fail"
cases. In these situations, make sure that we fill in the "sig" and "code"
fields of the generated signal.
MFC after: 3 weeks
The hardware supports periods as long as 196 seconds[*] when using the
maximal prescaling of 72000 and maximum cycle count of 2^16.
But the code becomes incorrect when the period length approaches 1 second.
That's because of things like NS_PER_SEC / period.
[*] At the same time I must note that the KPI provides for maximum
period of about 4 seconds (2^32 nanoseconds).
MFC after: 2 weeks
On Ampere Altra systems, the sparse population of RAM within the
physical address space causes the vm_page_dump bitmap to be much
larger than necessary, increasing the size from ~8 Mib to > 2 Gib
(and overflowing `int` for the size).
Changing the page dump bitmap also changes the minidump file
format, so changes are also necessary in libkvm.
Reviewed by: jhb
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26131
These definitions were repeated by all architectures, with small
variations. Consolidate the common definitons in machine
independent code and use bitset(9) macros for manipulation. Many
opportunities for deduplication remain in the machine dependent
minidump logic. The only intended functional change is increasing
the bit index type to vm_pindex_t, allowing the indexing of pages
with address of 8 TiB and greater.
Reviewed by: kib, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26129
OTG mode is not supported still. It's easy to do it as a one-off
detection, but the proper support requires continuous monitoring and
communicating the current state to the USB layer.
Also, fix phy0_route setting for H3. Remove duplicate register
definitions.
Tested on Orange Pi PC Plus with dr_mode="peripheral" using
hw.usb.template=3
umodem_load="YES"
Reviewed by: manu
MFC after: 5 weeks
Differential Revision: https://reviews.freebsd.org/D26348
One problem with the bus_space_read_N() and bus_space_write_N() family of
functions is that they provide no protection against exceptions which can
occur when no physical hardware or device responds to the read or write
cycles. In such a situation, the system typically would panic due to a
kernel-mode bus error. The bus_space_peek_N() and bus_space_poke_N() family
of functions provide a mechanism to handle these exceptions gracefully
without the risk of crashing the system.
Typical example is access to PCI(e) configuration space in bus enumeration
function on badly implemented PCI(e) root complexes (RK3399 or Neoverse
N1 N1SDP and/or access to PCI(e) register when device is in deep sleep state.
This commit adds a real implementation for arm64 only. The remaining
architectures have bus_space_peek()/bus_space_poke() emulated by using
bus_space_read()/bus_space_write() (without exception handling).
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25371
