After r340644 there were two things wrong in cases where there is both
an ECDT, and an EC device exposed via acpica. The first is a rather
trivial situation where the device desc would say ECDT even when it was
not implicitly created via ECDT (not really sure why the compiler
doesn't seem to warn about this).
The other more pervasive issue is that the code is designed to
essentially not do anything for EC probe when its uid was already
created an EC based on the ECDT's uid. The issue was that probe would
still return 0 in this case, and so we'd end up with some weird
duplication. Now to be honest, I'm not actually sure what exactly broke,
but it was definitely not working as intended. To fix this, all that is
really needed is to make sure we return ENXIO when we're probing the
device already added for the ECDT entry. While here though, move the
check for this earlier to avoid wasted cycles when we know after
obtaining the uid that it's duplicative.
There remains one questionable bit here which I don't want to touch -
when doing probe for PNP0C09, if acquiring _UID for the device fails, 0
is assumed, which is a valid UID used by the implicit ECDT.
Reported by: Charlie Li, et al.
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D18311
Remove the requirement that a device be a ACPI method battery to be supported
as a battery.
Require now that the device be in the battery devclass and implement the
get_status and get_info functions. This allows batteries which are not ACPI
method batteries to be supported.
Reviewed by: jtl
Approved by: jtl (mentor)
MFC after: 1 Month
Differential Revision: https://reviews.freebsd.org/D17434
This patch utilizes the fixed_devclass attribute in order to make sure
other acpi devices with params don't get confused for an EC device.
The existing code assumes that acpi_ec_probe is only ever called with a
dereferencable acpi param. Aside from being incorrect because other
devices of ACPI_TYPE_DEVICE may be probed here which aren't ec devices,
(and they may have set acpi private data), it is even more nefarious if
another ACPI driver uses private data which is not dereferancable. This
will result in a pointer deref during boot and therefore boot failure.
On X86, as it stands today, no other devices actually do this (acpi_cpu
checks for PROCESSOR type devices) and so there is no issue. I ran into
this because I am adding such a device which gets probed before
acpi_ec_probe and sets private data. If ARM ever has an EC, I think
they'd run into this issue as well.
There have been several iterations of this patch. Earlier
iterations had ECDT enumerated ECs not call into the probe/attach
functions of this driver. This change was Suggested by: jhb@.
Reviewed by: jhb
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D16635
Now that we are handling PCI resources in pci_host_generic_acpi.c, we
don't need these change (made by r336129)
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17792
This is a major update for pci_host_generic_acpi.c, the current
implementation has some gaps that are better fixed up in one go.
The changes are to:
* Follow x86 method of not adding PCI resources to PCI host bridge in
ACPI code. This has been moved to pci_host_generic_acpi.c, where we
walk thru its resources of the host bridge and add them.
* Fixup code in pci_host_generic_acpi.c to read all decoded ranges
and update the 'ranges' property. This allows us to share most of
the code with generic implementation (and the FDT one).
* Parse and setup IO ranges and bus ranges when walking the resources
above. Drop most of the changes related to this from acpica code.
* Add the ECAM memory area as mem resource 0. Implement the logic to
get the ECAM area from MCFG (using bus range which we now decode),
or from _CBA (using _BBN/bus range). Drop aarch64 ifdefs from acpica
code which did part of this.
* Switch resource activation to similar code as FDT implementation,
this can be moved into generic implementation in a later pass.
* Drop the mechanism of using the 7th bit of bus number as the domain,
this is not correct and will work only in very specific cases. Use
_SEG as PCI domain and use the bus ranges of the host bridge to
provide start bus number.
This commit should not make any functional change to dev/acpica/acpi.c
for other architectures, almost all the changes there are to revert
earlier additions in this file done for aarch64.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17791
On arm64 (where INTRNG is enabled), the interrupts have to be mapped
with ACPI_BUS_MAP_INTR() before adding them as resources to devices.
The earlier code did the mapping before calling acpi_set_resource(),
which bypassed code that checked for PCI link interrupts.
To fix this, move the call to map interrupts into acpi_set_resource()
and that requires additional work to lookup interrupt properties.
The changes here are to:
* extend acpi_lookup_irq_handler() to lookup an irq in the ACPI
resources
* create a helper function acpi_map_intr() which uses the updated
acpi_lookup_irq_handler() to look up an irq, and then map it
with ACPI_BUS_MAP_INTR()
* use acpi_map_intr() in acpi_pcib_route_interrupt() to map
pci link interrupts.
With these changes, we can drop the ifdefs in acpi_resource.c, and
we can also drop the call for mapping interrupts in generic_timer.c
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D17790
Curiously, the in-kernel routines always use the design voltage to
convert from mA to mW, but acpiconf in userland uses the current
voltage. As a result, this can report a different mW rate than
acpiconf.
Submitted by: Manuel Stühn <freebsdnewbie@freenet.de>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D17077
The AML is even stupider than always returning 0. It will only return
non-zero for an OS that reports itself as "Windows 2015", at least
on the Threadripper board's AML that I've examined.
Those AMLs also suggest we may need this quirk for AMI0030 as well.
There may be other cases where we need to override the _STA in a
generic way, so we should consider writing code to do that.
The Device Specific Method (_DSM) is on optional object that defines
device specific controls. This will be useful for our power management
controller in upcoming patches. More information can be found in ACPI
spec 6.2 section 9.1.1
https://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf
This patch had a minor modification changing ENOMEM to AE_NO_MEMORY
after it got review and approval but before committing.
Test Plan: Tested in my s0ix branch
Reviewed by: kib
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D17121
This is an amalgam of a patch by Doug Ambrisko to
generalize uart_acpi_find_device, imp moving the
ACPI table to uart_dev_ns8250.c and advice by jhb
to work around a bug in the EPYC 3151 BIOS
(the BIOS incorrectly marks the serial ports as
disabled)
Reviewed by: imp
MFC after: 8 weeks
Differential Revision: https://reviews.freebsd.org/D16432
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
It's likely that the header was needed in the past for swi(9).
But now that code does not use swi(9) or any other interfaces defined
in sys/interrupt.h.
MFC after: 1 week
work when called by members of the 'operator' group. They are already
allowed to eg power off the system (via suid shutdown(8)), so they
might as well be permitted to suspend it.
Tested by: xmj@
Reviewed by: delphij@
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16062
I want to do this change because this call (actually,
AcpiHwLegacyWakePrep) does a memory allocation and ACPI namespace
evaluation. Although it is not very likely to run into any trouble, it
is still not safe to make those calls with interrupts disabled.
witness(4) and malloc(9) do not currently check for a context with
interrupts disabled via intr_disable and we lack a facility for doing
that. So, those unsafe operations fly under the radar. But if
intr_disable in acpi_EnterSleepState was replaced with spinlock_enter
(which it probably should be), then witness and malloc would immediately
complain.
Also, AcpiLeaveSleepStatePrep is documented as called when interrupts
are enabled. It used to require disabled interrupts, but that
requirement was changed a long time ago when support for _BFS and _GTS
was removed from ACPICA.
The ACPI wakeup sequence is very sensitive to changes. I consider this
change to be correct, but there can be fallouts from it.
What AcpiHwLegacyWakePrep essentially does is writing a value
corresponding to S0 into SLP_TYPx bits of PM1 Control Register(s).
According to ACPI specifications that write should be a NOP as SLP_EN
bit is not set. But I see in some chipset specifications that they
allow to ignore SLP_EN altogether and to act on a change of SLP_TYPx
alone.
Also, there are a couple of accesses to ACPI hardware before the new
location of the call to AcpiLeaveSleepStatePrep. One is to clear the
power button status and the other is to enable SCI. So, the move may
affect the interaction between then OS and ACPI platform.
I have not seen any regressions on my test system, but it's a desktop.
MFC after: 5 weeks
The TSC-s are checked and synchronized only if they were good
originally. That is, invariant, synchronized, etc.
This is necessary on an AMD-based system where after a wakeup from STR I
see that BSP clock differs from AP clocks by a count that roughly
corresponds to one second. The APs are in sync with each other. Not
sure if this is a hardware quirk or a firmware bug.
This is what I see after a resume with this change:
SMP: passed TSC synchronization test after adjustment
acpi_timer0: restoring timecounter, ACPI-fast -> TSC-low
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15551
I have a system that is very unstable after resuming from suspend-to-RAM
but only if HPET is used as the event timer. The theory is that SMM
code / firmware could be enabling HPET for its own uses and unexpected
interrupts cause a trouble for it. Originally I wanted to solve the
problem in hpet_suspend() method, but that was insufficient as the event
timer could get reprogrammed again.
So, it's better, for my case and in general, to stop the event timer(s)
before entering the hardware suspend.
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D15413
This sysctl allows a deeper dive into the sleep abyss comparing to
debug.acpi.suspend_bounce. When the new sysctl is set the system will
execute the suspend sequence up to the call to AcpiEnterSleepState().
That includes saving processor contexts and parking APs. Then, instead
of actually entering the sleep state, the BSP will call resumectx() to
emulate the wakeup. The APs should get restarted by the sequence of
Init and Startup IPIs that BSP sends to them.
MFC after: 8 days
ACPI I/O port descriptors use _MIN and _MAX fields to specify the set
of allowable base (start) addresses for an I/O port resource along with
a _LEN field specifying the length. A fixed resource is supposed to be
encoded with _MIN == _MAX, but some buggy firmwares instead set _MAX to
the end of the fixed range. Relocating I/O ranges only make sense in
_PRS (possible resource settings), not in _CRS (current resource settings),
so if an I/O port range with _MAX set set to the end of the range is
present in _CRS, treat it as a fixed I/O port resource starting at
_MIN.
PR: 224096
Submitted by: Harald Böhm <harald@boehm.codes>
Pointy hat to: jhb (taking so long to actually commit this)
MFC after: 1 week
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
bus provide it with its needed memory resources.
This allows us to use PCIe on the ThunderX2 and, with a previous version
of the patch, on the SoftIron 3000 with ACPI.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Sponsored by: DARPA, AFRL
Sponsored by: Cavium (Hardware)
Differential Revision: https://reviews.freebsd.org/D8767
6.0 spec 6.4.3.5 bit 0 is ignored on QWord, DWord, and Word Address Space
Descriptors, but not Extended Address Space Descriptors.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Sponsored by: Cavium (Hardware)
Differential Revision: https://reviews.freebsd.org/D14516
allocated with a tag to come from the specified domain if it meets the
other constraints provided by the tag. Automatically create a tag at
the root of each bus specifying the domain local to that bus if
available.
Reviewed by: jhb, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13545
This adds a new acpi_bus interface with a map_intr method. This is similar
to the Open Firmware map_intr method and allows us to create the needed
mapping from ACPI space to INTRNG space.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8617
By the ACPI standard (ACPI 5 chapter 8.4 Declaring Processors) Processors
can be implemented in 2 distinct ways:
* Through a Processor object type (which provides P_BLK)
* Through a Device object type
Prior to this change, the FreeBSD driver only supported the former. AMD
Epyc / Poweredge systems we are testing both implement the latter only. Add
the missing support.
Because P_BLK is not defined in the device object case, C-states entering
must be completely controlled via _CST methods rather than P_LVL2/3.
John Baldwin points out that ACPI 6.0 formally deprecates the Processor
keyword, so eventually processors will only be enumerated as Device objects.
Submitted by: attilio
Reviewed by: jhb, markj, Anton Rang <rang AT acm.org>
Relnotes: maybe
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13457
From ACPICA 20170929, AcpiOsGetTimer() should be available early because
While() loop timeout mechanism was reimplemented with it. Unfortunately,
it means AcpiLoadTables() may cause panic when a While() loop is executed.
After having lengthy discussions with ACPICA developers, I have concluded
that dummy timecounter is good enough for the purpose and it is the least
intrusive solution for now. Also, they reminded me the ACPI specification
implies OS timer function should be available before loading tables.
This addresses a deadlock during boot when EARLY_AP_STARTUP is configured:
a taskqueue thread may call pause() with an ACPI mutex held, and thread0
may block on this mutex before configuring the eventtimer. In this case
the taskqueue thread will sleep forever waiting for its callout to fire.
PR: 220277
Submitted by: jhb
MFC after: 3 days
For GEN1 Hyper-V, vmbus is attached to pcib0, which contains the
resources for PCI passthrough and SR-IOV. There is no
acpi_syscontainer0 on GEN1 Hyper-V.
For GEN2 Hyper-V, vmbus is attached to acpi_syscontainer0, which
contains the resources for PCI passthrough and SR-IOV. There is
no pcib0 on GEN2 Hyper-V.
The ACPI VMBUS device now only holds its _CRS, which is empty as
of this commit; its existence is mainly for upward compatibility.
Device tree structure is suggested by jhb@.
Tested-by: dexuan@
Collabrated-wth: dexuan@
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D10565
- Rename the default implementation of 'pcib_request_feature' and add
a pcib_request_feature() wrapper function (as is often done for
new-bus APIs implemented via kobj) that accepts a single function.
Previously the call to pcib_request_feature() ended up invoking the
method on the great-great-grandparent of the bridge device instead
of the grandparent. For a bridge that was a direct child of pci0 on
x86 this resulted in the method skipping over the Host-PCI bridge
driver and being invoked against nexus0
- When invoking _OSC from a Host-PCI bridge driver, invoke
device_get_softc() against the Host-PCI bridge device instead of the
child bridge that is requesting HotPlug. Using the wrong softc data
resulted in garbage being passed for the ACPI handle causing the
_OSC call to fail.
- While here, perform some other cleanups to _OSC handling in the ACPI
Host-PCI bridge driver:
- Don't invoke _OSC when requesting a control that has already been
granted by the firmware.
- Don't set the first word of the capability array before invoking
_OSC. This word is always set explicitly by acpi_EvaluateOSC()
since it is UUID-independent.
- Don't modify the set of granted controls unless _OSC doesn't exist
(which is treated as always successful), or the _OSC method
doesn't fail.
- Don't require an _OSC status of 0 for success. _OSC always
returns the updated control mask even if it returns a non-zero
status in the first word.
- Whine if _OSC ever tries to revoke a previously-granted control.
(It is not supposed to do that.)
- While here, add constants for the _OSC status word in acpivar.h
(though currently unused).
Reported by: adrian
Reviewed by: imp
MFC after: 1 week
Tested on: Lenovo x220
Differential Revision: https://reviews.freebsd.org/D10520
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().
Reviewed by: gnn, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10313
During acpi_cmbat_attach() the acpi_cmbat_init_battery() notification
handler is registered. It has been observed this notification handler
can be called instantly, before the attach routine has returned. In
the notification handler there is a call to device_is_attached() which
returns false. Because the softc is set we know an attach is in
progress and the fix is simply to wait and try again in this case.
Reviewed by: avg @
MFC after: 1 week
Convert PCIe hot plug support over to asking the firmware, if any, for
permission to use the HotPlug hardware. Implement pci_request_feature
for ACPI. All other host pci connections to allowing all valid feature
requests.
Sponsored by: Netflix
On Core2 and older Intel CPUs, where TSC stops in C2, system does not
allow C2 entrance if timecounter hardware is TSC. This is done by
tc_windup() which tests for TC_FLAGS_C2STOP flag of the new
timecounter and increases cpu_disable_c2_sleep if flag is set. Right
now init_TSC_tc() only sets the flag if cpu_deepest_sleep >= 2, but
TSC is initialized too early for this variable to be set by
acpi_cpu.c.
There is no reason to require that ACPI reported C2 and deeper states
to set TC_FLAGS_C2STOP, so remove cpu_deepest_sleep test from
init_TSC_tc() condition. And since this is the only use of the
variable, remove it at all.
Reported and submitted by: Jia-Shiun Li <jiashiun@gmail.com>
Suggested by: jhb
MFC after: 2 weeks
