went backwards when interrupts were masked for more than one i8254
interrupt period. It sometimes went backwards when the i8254 counter
was reprogrammed. Neither of these should happen in normal operation.
Update the i8254 timecounter support variables atomically. Calling
timecounter functions from fast interrupt handlers may actually work
in all cases now.
annoying #!CAM# indicators are used to be clear, in the expectation
that the places they show will be either fixed or diked out reasonably
quickly.
Reviewed by: ken
CAM options section.
Document that SCSI_DELAY is in milliseconds, not seconds.
Tell users that SCSI_CAM is only needed if you've got the QLogic driver in
your kernel.
Reviewed by: gibbs
Kazu writes:
The VESA support code requires vm86 support. Make sure your kernel
configuration file has the following line.
options "VM86"
If you want to statically link the VESA support code to the kernel,
add the following option to the kernel configuration file.
options "VESA"
The vidcontrol command now accepts the following video mode names:
VESA_132x25, VESA_132x43, VESA_132x50, VESA_132x60, VESA_800x600
The VESA_800x600 mode is a raster display mode. The 80x25 text will
be displayed on the 800x600 screen. Useful for some laptop computers.
vidcontrol accepts the new `-i <info>' option, where <info> must be
either `adapter' or `mode'. When the `-i adapter' option is given,
vidcontrol will print basic information (not much) on the video
adapter. When the `-i mode' option is specified, vidcontrol will
list video modes which are actually supported by the video adapter.
Submitted by: Kazutaka YOKOTA yokota@FreeBSD.ORG
===================================
HARP | Host ATM Research Platform
===================================
HARP 3
What is this stuff?
-------------------
The Advanced Networking Group (ANG) at the Minnesota Supercomputer Center,
Inc. (MSCI), as part of its work on the MAGIC Gigabit Testbed, developed
the Host ATM Research Platform (HARP) software, which allows IP hosts to
communicate over ATM networks using standard protocols. It is intended to
be a high-quality platform for IP/ATM research.
HARP provides a way for IP hosts to connect to ATM networks. It supports
standard methods of communication using IP over ATM. A host's standard IP
software sends and receives datagrams via a HARP ATM interface. HARP provides
functionality similar to (and typically replaces) vendor-provided ATM device
driver software.
HARP includes full source code, making it possible for researchers to
experiment with different approaches to running IP over ATM. HARP is
self-contained; it requires no other licenses or commercial software packages.
HARP implements support for the IETF Classical IP model for using IP over ATM
networks, including:
o IETF ATMARP address resolution client
o IETF ATMARP address resolution server
o IETF SCSP/ATMARP server
o UNI 3.1 and 3.0 signalling protocols
o Fore Systems's SPANS signalling protocol
What's supported
----------------
The following are supported by HARP 3:
o ATM Host Interfaces
- FORE Systems, Inc. SBA-200 and SBA-200E ATM SBus Adapters
- FORE Systems, Inc. PCA-200E ATM PCI Adapters
- Efficient Networks, Inc. ENI-155p ATM PCI Adapters
o ATM Signalling Protocols
- The ATM Forum UNI 3.1 signalling protocol
- The ATM Forum UNI 3.0 signalling protocol
- The ATM Forum ILMI address registration
- FORE Systems's proprietary SPANS signalling protocol
- Permanent Virtual Channels (PVCs)
o IETF "Classical IP and ARP over ATM" model
- RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
- RFC 1577, "Classical IP and ARP over ATM"
- RFC 1626, "Default IP MTU for use over ATM AAL5"
- RFC 1755, "ATM Signaling Support for IP over ATM"
- RFC 2225, "Classical IP and ARP over ATM"
- RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
- Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
"A Distributed ATMARP Service Using SCSP"
o ATM Sockets interface
- The file atm-sockets.txt contains further information
What's not supported
--------------------
The following major features of the above list are not currently supported:
o UNI point-to-multipoint support
o Driver support for Traffic Control/Quality of Service
o SPANS multicast and MPP support
o SPANS signalling using Efficient adapters
This software was developed under the sponsorship of the Defense Advanced
Research Projects Agency (DARPA).
Reviewed (lightly) by: phk
Submitted by: Network Computing Services, Inc.
Convert autoconf hooks from old SCSI system to CAM.
busdma_machdep.c:
bus_dmamap_free() should expect the nobounce map, not a NULL one.
mountroot.c:
swapgeneric.c:
da and od changes.
symbols.raw:
Nuke the old disk stat symbols.
userconfig.c:
Disable the SCSI listing code until it can be converted to CAM.
and set_regs() but for the floating point register state. The code
is stolen from procfs_machdep.c, and moved out of there into
machdep.c.
These functions are needed for generating ELF core dumps.
the relevant characteristics of the native machine, for building
and checking Elf_Ehdr structures.
Add structures to represent ELF "note" headers. Add defines for the
note types used in ELF core files.
as "machdep.msgbuf". It's needed in case of using stripped kernels, where
normal dmesg (which has to use kvm) doesn't work.
The buffer is unwound, meaning that the data will be linear, possibly
with some leading NULLs.
Reviewed by: Jordan K. Hubbard <jkh@freebsd.org>
object format of the executable being dumped. This is the first
step toward producing ELF core dumps in the proper format. I will
commit the code to generate the ELF core dumps Real Soon Now. In
the meantime, ELF executables won't dump core at all. That is
probably no less useful than dumping a.out-style core dumps as they
have done until now.
Submitted by: Alex <garbanzo@hooked.net> (with very minor changes by me)
standard places ("/etc/objformat", ${OBJFORMAT}, argv) for an
indication of the user's preferred object file format. This
consolidates some code that was starting to be duplicated in more
and more places.
Use the new function in ldconfig.
Note: I don't think that gcc should use getobjformat(), even though
it could. The compiler should limit itself to functions that are
widespread, to ease porting and cross-compilation.
the executable file, so it will work for both a.out and ELF format
files. I have split the object format specific code into separate
source files. It's cleaner than it was before, but it's still
pretty crufty.
Don't cheat on your make world for this update. A lot of things
have to be rebuilt for it to work, including the compiler and all
of the profiled libraries.
and use this when masking/unmasking interrupts.
Maintain a mapping from (iopaic number, int pin) tuple to irq number,
and use this when configuring devices and programming the ioapics.
Previous code assumed that irq number was equal to int pin number, and
that the ioapic number was 0.
Don't let an AP enter _cpu_switch before all local apics are initialized.
arguments as appropriate. This is necessary because setting OBJFORMAT=aout
in the makefile doesn't get exported to the environment. I wish our
make could do that!
Added PR kern/7177 for SECAM Video Highway Xtreme with single crystal
PLL configuration submitted by Vsevolod Lobko <seva@alex-ua.com>.
In kernel configuration file add
options OVERRIDE_CARD=2
options OVERRIDE_TUNER=11
options BKTR_USE_PLL
Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
Normally the full 640x480 (768x576 PAL) image is grabbed. This ioctl
allows a smaller area from anywhere within the video image to be
grabbed, eg a 400x300 image from (50,10).
See restrictions in BT848SCAPAREA.
Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
- moved definition of MACHINE_ARCH from cpu.h to parm.h as alpha.
- Added definitions of _MACHINE and _MACHINE_ARCH.
- Added hw.ispc98. The hw.ispc98 is 1 in PC98 kernel and is 0 in
IBM-PC kernel.
Discussed with: John Birrell <jb@FreeBSD.ORG>
XFree86 server, users need to create the following links in their
/compat/linux/dev directory (assuming kernel configured with 4 VTs).
lrwxrwxrwx 1 root wheel 7 Aug 30 22:59 tty0 -> console
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty1 -> ttyv0
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty2 -> ttyv1
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty3 -> ttyv2
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty4 -> ttyv3
VT switching is still not yet supported. Attempting to switch VT
currently will cause Xserver bus error.
Submitted by: Chain Lee <chain@110.net>
a kernel be built and installed at just the right time. If the system
were to be rebooted after installing the 3.0 binaries without the
new kernel, the system is hosed.
The addition of this config file reserves the name of the config file
that the upgrade procedure uses. If an upgrade is to be performed on
a 2.2.5/6/7 system system for which a GENERIC kernel is inadequate,
this config file must be replace with a suitable one before performing
the upgrade.
On systems which report 'uname -r' as 3.0-CURRENT, the kernel build
is not performed and this file is ignored.
Add a sysctl 'machdep.cs_recv_delay' to specify how long to wait after
receiving a packet in order to check for a subsequent (back-to-back)
packet. The cs8900 has a very small receive buffer, so this helps avoid
overflows at the cost of some extra CPU overhead.
Submitted by: Oleg Sharoiko <os@rsu.ru>, MIHIRA "Sanpei" Yoshiro <sanpei@sanpei.org>
Add some overflow checks to read/write (from bde).
Change all modifications to vm_page::flags, vm_page::busy, vm_object::flags
and vm_object::paging_in_progress to use operations which are not
interruptable.
Reviewed by: Bruce Evans <bde@zeta.org.au>
for the Lite2 fix for always returning EIO in dead_read().
Cleaned up the cdevswitch initializers for all tty drivers.
Removed explicit calls to ttsetwater() from all (tty) drivers. ttsetwater()
is now called centrally for opens, not just for parameter changes.
The check for dropping unicast packets not sent to our ethernet
address is after the bpf tap, but not conditioned on it. All packets
received should get handed to bpf, and unicast packets not to us (mac)
should get dropped whether or not there is a bpf listener. I believe
that the common optimization that the interface is in hw promisc mode
iff there is a bpf listener is in general wrong, but more frequently
so on wavelans.
I think Max's fix makes bpf listeners not see unicast packets sent to
others, but I'm not sure.
One can argue that checking on MOD_ENAL is wrong, but the code only
drops packets that shouldn't be received. The correctness condition
is that it be run whenever unicast packets without our mac address can
be received.
PR: kern/7144
Submitted by: Greg Troxel <gdt@ir.bbn.com>
for 1 second's worth of input) and larger tty output buffers. The
interrupt-level buffers are still too small for speeds above 115200
bps (only a little too small for 230400 bps if RTS flow control is
enabled).
Don't call ttsetwater() explicitly in open(). It is now called for
the TTYDISC l_open() and should be static.
Don't attempt to register the cdevsw more than once.
I don't have access to a real VT220 to verify this against.
However, I'm committing the patch in `good faith' because
(a) getting hold of a real VT220 is going to be increasingly difficult
the longer the PR sits around,
(b) some one was troubled enough to in a PR and
(c) the fix is minor and has no other implications.
PR: 7559
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>
in a SMP system. Unexpected things could happen if each cpu
has a different ldt setting and one cpu tries to use value
of currentldt set by another cpu.
The fix is to move currentldt to the per-cpu area. It includes
patches I filed in PR i386/6219 which are also user ldt related.
PR: i386/7591, i386/6219
Submitted by: Luoqi Chen <luoqi@watermarkgroup.com>
not the necessarily the same as the seconds part of getmicrotime()
yet, and anyway, we should have used `time_second' if we only wanted
a sloppy value for the seconds part. There is no point in making
ibcs2's time(2) more efficient than FreeBSD's time(3).
stability now. ALso modify /sys/conf/files, /sys/i386/conf/GENERIC
and /sys/i386/conf/LINT to add entries for the XL driver. Deactivate
support for the XL adapters in the vortex driver. LAstly, add a man
page.
(Also added an MLINKS entry for the ThunderLAN man page which I forgot
previously.)
applications. Here's how it works.
The kernel should include <machine/elf.h> to get the definitions
for the native architecture. It can reference the various ELF
structures with generic names like Elf_Sym, Elf_Shdr, etc. A define
__ELF_WORD_SIZE is also available with the value 32 or 64 as
appropriate for the native architecture.
Generic applications should include <elf.h>, which is just a wrapper
for <machine/elf.h>.
Applications such as object file dumpers that need to deal with
foreign ELF files can include <sys/elf32.h> and/or <sys/elf64.h>.
Both can be included from the same source file if desired. The
structure names must be referenced using wordsize-specific names
like Elf32_Sym, Elf64_Shdr, etc.
I haven't change the alpha stuff, but I haven't broken it either.
Cast pointers to (vm_offset_t) instead of to (u_long) (as before) or to
(uintptr_t)(void *) (as would be more correct). Don't cast vm_offset_t's
to (u_long) just to do arithmetic on them.
mp_machdep.c:
Cast pointers to (uintptr_t) instead of to (u_long). Don't forget
to cast pointers to (void *) first or to recover from integral
possible integral promotions, although this is too much work for
machine-dependent code.
vm code generally avoids warnings for pointer vs long size mismatches
by using vm_offset_t to represent pointers; pmap.c often uses plain
`unsigned int' instead of vm_offset_t and didn't use u_long elsewhere,
but this style was messed up by code apparently imported from mp_machdep.c.
address constants. This fixes some warnings for conversions from
64-bit integers to 32-bit pointers on i386's with 64-bit longs.
vm86 still uses too many u_longs.
It can be integral or a struct in POSIX, so it is difficult to print,
but it is actually declared as unsigned long. Assume that it is
unsigned integral.
of invariants to cyattach().
Fixed minor bugs:
- cyparam() returned without restoring the ipl in the error cases. This
was harmless because cyparam() is always called at spltty().
- one check for "rev. J or higher" actually checked for precisely rev. J.
swapped RTS/DTR). Merge the vendor's modification of the 2.2.6-release
version into -current for reference. Will be cleaned up in next commit.
Obtained from: ftp://ftp.cyclades.com/pub/cyclades/cyclom-y/freebsd/2.2.6/cyy226.tar.gz
instead of at compile time using ifdefs.
Use _swi_null instead of dummycamisr. CAM and dpt should call
register_swi() instead of hacking on ihandlers[] directly.
instead of 0) was "restored" after handling a trap that occurred while
returning to user mode. This bug was most noticeable for VM86 and is
still detected and fixed up (on return from the next exception) in doreti
if VM86 is configured.
in ddb) which I broke by changing %8[l]x to %8p. Hacked the central
printf routine to not add an "0x" prefix for %p formats if the field
width is nonzero. The tables are still horribly misformatted on
64-bit machines.
Use %p instead of %8p to print pointers when the field width isn't
important.
chip.
It has been observed that the problem is most apparent:
a) in notebook computers,
b) and/or in the systems with C&T video chips.
Define the new configuration option SC_BAD_FLICKER in the kernel
configuration file to remove outb()/outw() calls in question.
DOS partition type 15 (Extended DOS, LBA) as a container for
DOS logical volumes, so the appropriate slices (e.g. sd1s5)
are not initialized.
PR: 7549
PR: 4120
Reviewed by: phk
Submitted by: Jim Mattson <jmattson@sonic.net>
Fixed nearby bugs (in linux_alarm()):
- the itimer for the alarm was relative to the epoch instead of relative
to the boot time. This was harmless because the itimer's interval is 0.
- the seconds arg was not checked for validity before converting it to a
possibly different value.
- printf format errors.
Improvements:
Don't use splclock(). splsoftclock() suffices. Don't complicate things
by micro-optimizing interrupt latency.
Minor improvements:
Various micro-optimizations to exploit the specialness of the alarm itimer
and the value 0.
