shifts into the sign bit. Instead use (1U << 31) which gets the
expected result.
This fix is not ideal as it assumes a 32 bit int, but does fix the issue
for most cases.
A similar change was made in OpenBSD.
Discussed with: -arch, rdivacky
Reviewed by: cperciva
requires process descriptors to work and having PROCDESC in GENERIC
seems not enough, especially that we hope to have more and more consumers
in the base.
MFC after: 3 days
commit level triggered interrupts would work as long as the pin was not shared
among multiple interrupt sources.
The vlapic now keeps track of level triggered interrupts in the trigger mode
register and will forward the EOI for a level triggered interrupt to the
vioapic. The vioapic in turn uses the EOI to sample the level on the pin and
re-inject the vector if the pin is still asserted.
The vhpet is the first consumer of level triggered interrupts and advertises
that it can generate interrupts on pins 20 through 23 of the vioapic.
Discussed with: grehan@
would exceed the maximum size. This can be a difficult problem to diagnose
if one is, for instance, using -s with a fixed size in a script and the bsize
calculated for a filesystem image changes, necessitating a re-rounding of the
image size or a hand-setting of the bsize. Previously one would get a
cryptic message about how the size exceeded the maximum size, which normally
only happens if the contents of the image are larger than specified.
bhyveload: introduce the -c <device> parameter
to select a tty for output (or "stdio")
bhyve: allow the puc and lpc-com backends to
accept a tty in addition to "stdio"
When used in conjunction with the null-modem device,
nmdm(4), this allows attach/detach to the guest console
and multiple concurrent serial ports. kgdb on a serial
port is now functional.
Reviewed by: neel
Requested by: Almost everyone that has used bhyve
MFC after: 10.0
Table is 22 bits, with the bit 31 being the interrupt-on-completion
bit.
OpenBSD and UEFI set this bit, resulting in large block i/o lengths
being sent to bhyve and coredumping the process. Fix by masking off
the relevant 22 bits when using the DBC field as a length.
Reviewed by: Zhixiang Yu
Discussed with: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
MFC after: 10.0
actual value read by the guest from the device. The IOAPIC ID is now set to
zero in both MPtable/ACPI tables as well as in the ioapic device emulation.
Pointed out by: grehan@
bhyve supports a single timer block with 8 timers. The timers are all 32-bit
and capable of being operated in periodic mode. All timers support interrupt
delivery using MSI. Timers 0 and 1 also support legacy interrupt routing.
At the moment the timers are not connected to any ioapic pins but that will
be addressed in a subsequent commit.
This change is based on a patch from Tycho Nightingale (tycho.nightingale@pluribusnetworks.com).
to inject edge triggered legacy interrupts into the guest.
Start using the new API in device models that use edge triggered interrupts:
viz. the 8254 timer and the LPC/uart device emulation.
Submitted by: Tycho Nightingale (tycho.nightingale@pluribusnetworks.com)
`device.subr' framework (improving performane and reducing sub-shells). Next
improve the `device.subr' framework itself. Make use of the `flags' device
struct member for network interfaces to indicate if an interface is Active,
Wired Ethernet, or 802.11 Wireless. Functions have been added to make checks
against the `flags' bit-field quick and efficient. Last, add function for
rescanning the network to update the device registers. Remove an unnecessary
local (ifn) while we're here (use already provided local `if').
nmtree.
The mtree output used by mergemaster in this case was clearly not meant for
computer consumption and an approach based on -f <file1> -f <file2> would
probalby be a better idea, but this is a minimal change.
MFC after: 3 days
X-MFC-with: r258437
errors on re-entry for physical media). Also, while we're here, stop
ejecting the CDROM when we're done with it (but leave the functions for
later use so that we could perhaps -- from the installer standpoint -- use
it to eject the media after an install).
MFC after: 3 days
fix a bug where "pkg update" was not getting the value of PACKAGESITE.
NB: PACKAGESITE needs to be explicitly exported in support of children.
MFC after: 3 days
- Fix ALWAYS_INSTALL to take precedence over the FreeBSD ID checks.
In particular, always install a file where the only change was
the FreeBSD ID even if -F is specified.
- Fix the -F option in the case that the only upstream change is a
change in the FreeBSD ID and the local file is removed.
- Add tests for these two cases.
have zero length. Filesystem corruption will tend to truncate files, and
since these are short that's likely to result in them becoming empty.
Suggested by: Richard Clayton
Convinced by: rwatson
MFC after: 3 weeks
