This fixes building in CheriBSD with a strict tmp path since we don't
bootstrap a cpp but pass the full path to clang-cpp instead.
While touching this file also fix all shellcheck warnings in make_dtb.sh.
Reviewed By: manu
Differential Revision: https://reviews.freebsd.org/D18376
MacOS/Linux do not define struct cmsgcred but we need to bootstrap libnv
when building on non-FreeBSD systems. Since they are not used during
bootstrap we can just omit these two functions there.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D18472
- Panic immediately if witness says we're holding non-sleepable locks.
This helps ensure that we don't recurse on the pmap lock in
pmap_fault_fixup().
- Panic if the kernel faults on a user address without setting an
onfault handler.
- Panic if the fault occurred in a critical section or interrupt
handler, like we do on other platforms.
- Fix some style issues in trap_pfault().
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18561
pmap_remove_pages() is called during process termination, when it is
guaranteed that no other CPU may access the mappings being torn down.
In particular, it unnecessary to invalidate each mapping individually
since we do a pmap_invalidate_all() at the end of the function.
Also don't call pmap_invalidate_all() while holding a PV list lock, the
global pvh lock is sufficient.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18562
pmaps on RISC-V always have an L1 page table page, so we don't need to
check for this when performing lookups.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18563
fcmpset returns true/false as a int, so make the return types and
variables match the int to be consistent with other arch.
Reviewed by: cognet@
Differential Revision: https://reviews.freebsd.org/D18557
- Build up phys_avail[] in a single loop, excluding memory used by
the loaded kernel.
- Fix an array indexing bug in the aforementioned phys_avail[]
initialization.[1]
- Remove some unneeded code copied from the arm64 implementation.
PR: 231515 [1]
Reviewed by: jhb
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18464
It was written basing on:
TCG PC Client Platform TPM Profile (PTP) Specification Version 22, Revision 1.03.
It only supports Locality 0. Interrupts are only supported in FIFO mode.
The driver in FIFO mode was tested on x86 with Infineon SLB9665 discrete TPM chip.
Driver in both modes was also tested on qemu with swtpm running on host.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D18048
This fix booting on A64 boards when disabling the unused regulators at boot.
We did disable all the regulator handled by register 0x13 which of course contain
mandatory regulators for the board to be up.
Reported by: Mark Millard <marklmi@yahoo.com>
X-MFC-With: r340848
This is based on a patch developed by
Tetsuya Uemura <t_uemura@macome.co.jp>.
Many thanks!
Submitted by: Tetsuya Uemura <t_uemura@macome.co.jp> (earlier version)
Tested by: Tetsuya Uemura <t_uemura@macome.co.jp>
MFC after: 2 weeks
very minimal prints and even few important messages will not get logged.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
capable IOs. NVME specification supports specific type of scatter gather list
called as PRP (Physical Region Page) for IO data buffers. Since NVME drive is
connected behind SAS3.5 tri-mode adapter, MegaRAID driver/firmware has to convert
OS SGLs in native NVMe PRP format. For IOs sent to firmware, MegaRAID firmware
does this job of OS SGLs to PRP translation and send PRPs to backend NVME device.
For fastpath IOs, driver will do this OS SGLs to PRP translation.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
required Write IOs as Fast Path IOs (after the appropriate checks
allowing Fast Path to be used) to the appropriate physical drives
(translated from the OS logical IO) and wait for all Write IOs to complete.
Design: A write IO on RAID volume will be examined if it can be sent in
Fast Path based on IO size and starting LBA and ending LBA falling on to
a Physical Drive boundary. If the underlying RAID volume is a RAID 1/10,
driver issues two fast path write IOs one for each corresponding physical
drive after computing the corresponding start LBA for each physical drive.
Both write IOs will have the same payload and are posted to HW such that
replies land in the same reply queue.
If there are no resources available for sending two IOs, driver will send
the original IO from upper layer to RAID volume through the Firmware.
When both IOs are completed by HW, the resources will be released
and SCSI IO completion handler will be called.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
stream to help HBA Firmware do the Full Stripe Writes. For read IOs on
certain RAID volumes like Read Ahead volumes,this will help driver to
send it to Firmware even if the IOs can potentially be sent to
hardware directly (called fast path) bypassing firmware.
Design: 8 streams are maintained per RAID volume as per the combined
firmware/driver design. When there is no stream detected the LRU stream
is used for next potential stream and LRU/MRU map is updated to make this
as MRU stream. Every time a stream is detected the MRU map
is updated to make the current stream as MRU stream.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
for different number of supported VDs for SAS3.5 MegaRAID adapters.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
Approved by: ken
MFC after: 3 days
Sponsored by: Broadcom Inc
1) filecaps_init was unnecesarily a function call
2) an asignment at the end was preventing tail calling of cap_rights_init
Sponsored by: The FreeBSD Foundation
Now the new devcrypto engine is enabled since r342009, many users started
seeing "Could not open /dev/crypto: No such file or directory". Disable
the annoying error message as it is not very useful anyway.
Note the patch was submitted upstream.
https://github.com/openssl/openssl/pull/7896
With the default Qemu parameters, only 128MB RAM gets given to a VM. This causes
the loader to be unable to allocate the 64MB it needs for the heap. This change
makes the cause of the error more obvious.
Differential Revision: https://reviews.freebsd.org/D17958
dtrace has its own routines which were not updated after SMAP support got
implemented. Use ifunc just like for other routines.
This in particular fixes ustack().
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18542
In the nda(4) driver, only set DISKFLAG_CANDELETE (a.k.a. can support
BIO_DELETE) if the drive supports Dataset Management. There are reports
that without this check, VMWare Workstation does not work reliably.
Fix is to check the ONCS field in the NVMe Controller Data structure for
support. This check previously existed but did not survive the
big-endian changes.
Reported by: yuripv@yuripv.net
Reviewed by: imp, mav, jimharris
Approved by: imp (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18493
Previous commits have made VM_MIN_KERNEL_ADDRESS its own separate entity,
and rebased the kernel around that address instead of KERNBASE. This commit
pulls the trigger to rebase KERNBASE to a physical load address. The
eventual goal is to align the address with the AIM KERNBASE, but at this
time that's not an option.
Currently a Book-E kernel must be loaded on a 64MB boundary, due to size
issues. The common load address is at the 64MB mark (0x04000000), so simply
make that the default KERNBASE.
As of this commit, Book-E kernels can be loaded and booted with ubldr.
MFC after: 3 weeks
