from being reclaimed before it was wired. Use pmap_extract_and_hold()
instead of pmap_extract() and retain the hold on the page until it has been
wired.
clock are supported. I have plan to merge XSI timer ITIMER_REAL and other
two CPU timers into the new code, current three slots are available for
the XSI timers.
The SIGEV_THREAD notification type is not supported yet because our
sigevent struct lacks of two member fields:
sigev_notify_function
sigev_notify_attributes
I have found the sigevent is used in AIO, so I won't add the two members
unless the AIO code is adjusted.
2. Introduce flags KSI_EXT and KSI_INS. The flag KSI_EXT allows a ksiginfo
to be managed by outside code, the KSI_INS indicates sigqueue_add should
directly insert passed ksiginfo into queue other than copy it.
available kernel malloc types. Quite useful for post-mortem debugging of
memory leaks without a dump device configured on a panicked box.
MFC after: 2 weeks
to unload the usb.ko module after boot if it was originally preloaded
from "/boot/loader.conf". When processing preloaded modules, the
linker erroneously added self-dependencies the each module's reference
count. That prevented usb.ko's reference count from ever going to 0,
so it could not be unloaded.
Sponsored by Isilon Systems.
Reviewed by: pjd, peter
MFC after: 1 week
called during early init before cninit().
Tested on: i386, alpha, sparc64
Reviewed by: phk, imp
Reported by: Divacky Roman xdivac02 at stud dot fit dot vutbr dot cz
MFC after: 1 week
While here, support up to four sections because it was trivial to do
and cheap. (One pointer per section).
For amd64 with "-fpic -shared" format .ko files, using a single PT_LOAD
section is important to avoid wasting about 1MB of KVM and physical ram
for the 'gap' between the two PT_LOAD sections. amd64 normally uses
.o format kld files and isn't affected normally. But -fpic -shared modules
are actually possible to produce and load... (And with a bugfix to
binutils, we can build and use plain -shared .ko files without -fpic)
i386 only wastes 4K per .ko file, so that isn't such a big deal there.
so we are ready for mpsafevfs=1 by default on sparc64 too. I have been
running this on all my sparc64 machines for over 6 months, and have not
encountered MD problems.
MFC after: 1 week
correspond to the commit log. It changed the maxswzone and maxbcache
parameters from int to long, without changing the extern definitions
in <sys/buf.h>.
In fact it's a good thing it did not, because other parts of the system
are not yet ready for this, and on large-memory sparc machines it causes
severe filesystem damage if you try.
The worst effect of the change was that the tunables controlling the
above variables stopped working. These were necessary to allow such
large sparc64 machines (with >12GB RAM) to boot, since sparc64 did not
set a hard-coded upper limit on these parameters and they ended
up overflowing an int, causing an infinite loop at boot in bufinit().
Reviewed by: mlaier
changes in MD code are trivial, before this change, trapsignal and
sendsig use discrete parameters, now they uses member fields of
ksiginfo_t structure. For sendsig, this change allows us to pass
POSIX realtime signal value to user code.
2. Remove cpu_thread_siginfo, it is no longer needed because we now always
generate ksiginfo_t data and feed it to libpthread.
3. Add p_sigqueue to proc structure to hold shared signals which were
blocked by all threads in the proc.
4. Add td_sigqueue to thread structure to hold all signals delivered to
thread.
5. i386 and amd64 now return POSIX standard si_code, other arches will
be fixed.
6. In this sigqueue implementation, pending signal set is kept as before,
an extra siginfo list holds additional siginfo_t data for signals.
kernel code uses psignal() still behavior as before, it won't be failed
even under memory pressure, only exception is when deleting a signal,
we should call sigqueue_delete to remove signal from sigqueue but
not SIGDELSET. Current there is no kernel code will deliver a signal
with additional data, so kernel should be as stable as before,
a ksiginfo can carry more information, for example, allow signal to
be delivered but throw away siginfo data if memory is not enough.
SIGKILL and SIGSTOP have fast path in sigqueue_add, because they can
not be caught or masked.
The sigqueue() syscall allows user code to queue a signal to target
process, if resource is unavailable, EAGAIN will be returned as
specification said.
Just before thread exits, signal queue memory will be freed by
sigqueue_flush.
Current, all signals are allowed to be queued, not only realtime signals.
Earlier patch reviewed by: jhb, deischen
Tested on: i386, amd64
notifications when LIO operations completed. These were the problems
with LIO event complete notification:
- Move all LIO/AIO event notification into one general function
so we don't have bugs in different data paths. This unification
got rid of several notification bugs one of which if kqueue was
used a SIGILL could get sent to the process.
- Change the LIO event accounting to count all AIO request that
could have been split across the fast path and daemon mode.
The prior accounting only kept track of AIO op's in that
mode and not the entire list of operations. This could cause
a bogus LIO event complete notification to occur when all of
the fast path AIO op's completed and not the AIO op's that
ended up queued for the daemon.
Suggestions from: alc
opt_device_polling.h
- Include opt_device_polling.h into appropriate files.
- Embrace with HAVE_KERNEL_OPTION_HEADERS the include in the files that
can be compiled as loadable modules.
Reviewed by: bde
the MAC result, as well as avoid losing the DAC check result when MAC
is enabled.
MFC after: 3 days
Reported by: Patrick LeBlanc <Patrick dot LeBlanc at sparta dot com>
framework. This makes Giant protection around MAC operations which inter-
act with VFS conditional, based on the MPSAFE status of the file system.
Affected the following syscalls:
o __mac_get_fd
o __mac_get_file
o __mac_get_link
o __mac_set_fd
o __mac_set_file
o __mac_set_link
-Drop Giant all together in __mac_set_proc because the
mac_cred_mmapped_drop_perms_recurse routine no longer requires it.
-Move conditional Giant aquisitions to after label allocation routines.
-Move the conditional release of Giant to before label de-allocation
routines.
Discussed with: rwatson
dedicated sysctl handlers. Protect manipulations with
poll_mtx. The affected sysctls are:
- kern.polling.burst_max
- kern.polling.each_burst
- kern.polling.user_frac
- kern.polling.reg_frac
o Use CTLFLAG_RD on MIBs that supposed to be read-only.
o u_int32t -> uint32_t
o Remove unneeded locking from poll_switch().
possible for do_execve() to call exit1() rather than returning. As a
result, the sequence "allocate memory; call kern_execve; free memory"
can end up leaking memory.
This commit documents this astonishing behaviour and adds a call to
exec_free_args() before the exit1() call in do_execve(). Since all
the users of kern_execve() in the tree use exec_free_args() to free
the command-line arguments after kern_execve() returns, this should
be safe, and it fixes the memory leak which can otherwise occur.
Submitted by: Peter Holm
MFC after: 3 days
Security: Local denial of service
calling sysctl_out_proc(). -- fix from jhb
Move the code in fill_kinfo_thread() that gathers data from struct proc
into the new function fill_kinfo_proc_only().
Change all callers of fill_kinfo_thread() to call both
fill_kinfo_proc_only() and fill_kinfo() thread. When gathering
data from a multi-threaded process, fill_kinfo_proc_only() only needs
to be called once.
Grab sched_lock before accessing the process thread list or calling
fill_kinfo_thread().
PR: kern/84684
MFC after: 3 days
o Axe poll in trap.
o Axe IFF_POLLING flag from if_flags.
o Rework revision 1.21 (Giant removal), in such a way that
poll_mtx is not dropped during call to polling handler.
This fixes problem with idle polling.
o Make registration and deregistration from polling in a
functional way, insted of next tick/interrupt.
o Obsolete kern.polling.enable. Polling is turned on/off
with ifconfig.
Detailed kern_poll.c changes:
- Remove polling handler flags, introduced in 1.21. The are not
needed now.
- Forget and do not check if_flags, if_capenable and if_drv_flags.
- Call all registered polling handlers unconditionally.
- Do not drop poll_mtx, when entering polling handlers.
- In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx.
- In netisr_poll() axe the block, where polling code asks drivers
to unregister.
- In netisr_poll() and ether_poll() do polling always, if any
handlers are present.
- In ether_poll_[de]register() remove a lot of error hiding code. Assert
that arguments are correct, instead.
- In ether_poll_[de]register() use standard return values in case of
error or success.
- Introduce poll_switch() that is a sysctl handler for kern.polling.enable.
poll_switch() goes through interface list and enabled/disables polling.
A message that kern.polling.enable is deprecated is printed.
Detailed driver changes:
- On attach driver announces IFCAP_POLLING in if_capabilities, but
not in if_capenable.
- On detach driver calls ether_poll_deregister() if polling is enabled.
- In polling handler driver obtains its lock and checks IFF_DRV_RUNNING
flag. If there is no, then unlocks and returns.
- In ioctl handler driver checks for IFCAP_POLLING flag requested to
be set or cleared. Driver first calls ether_poll_[de]register(), then
obtains driver lock and [dis/en]ables interrupts.
- In interrupt handler driver checks IFCAP_POLLING flag in if_capenable.
If present, then returns.This is important to protect from spurious
interrupts.
Reviewed by: ru, sam, jhb
to avoid touching pageable memory while holding a mutex.
Simplify argument list replacement logic.
PR: kern/84935
Submitted by: "Antoine Pelisse" apelisse AT gmail.com (in a different form)
MFC after: 3 days
Add a new private thread flag to indicate that the thread should
not sleep if runningbufspace is too large.
Set this flag on the bufdaemon and syncer threads so that they skip
the waitrunningbufspace() call in bufwrite() rather than than
checking the proc pointer vs. the known proc pointers for these two
threads. A way of preventing these threads from being starved for
I/O but still placing limits on their outstanding I/O would be
desirable.
Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from
blocking on the runningbufspace check while holding snaplk. This
prevents snaplk from being held for an arbitrarily long period of
time if runningbufspace is high and greatly reduces the contention
for snaplk. The disadvantage is that ffs_copyonwrite() can start
a large amount of I/O if there are a large number of snapshots,
which could cause a deadlock in other parts of the code.
Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace
before attempting to grab snaplk so that I/O requests waiting on
snaplk are not counted in runningbufspace as being in-progress.
Increment runningbufspace again before actually launching the
original I/O request.
Prior to the above two changes, the system could deadlock if enough
I/O requests were blocked by snaplk to prevent runningbufspace from
falling below lorunningspace and one of the bawrite() calls in
ffs_copyonwrite() blocked in waitrunningbufspace() while holding
snaplk.
See <http://www.holm.cc/stress/log/cons143.html>
