Commit Graph

189 Commits

Author SHA1 Message Date
Jason Evans
386812d440 Fix some minor POSIX/SUSv2 compliance nits.
PR:		kern/11982
1999-12-18 01:00:42 +00:00
Daniel Eischen
fc8f3f5bfe Fix problems with cancellation while in critical regions.
o Cancellation flags were not getting properly set/cleared.
  o Loops waiting for internal locks were not being exited
    correctly by a cancelled thread.
  o Minor spelling (cancelation -> cancellation) and formatting
    corrections (missing tab).

Found by:	tg
Reviewed by:	jasone
1999-12-17 00:57:54 +00:00
Daniel Eischen
3dc268f4e7 Fixes for signal handling:
o Don't call signal handlers with the signal handler access lock
    held.
  o Remove pending signals before calling signal handlers.  If
    pending signals were not removed prior to handling them,
    invocation of the handler could cause the handler to be
    called more than once for the same signal.  Found by: JB
  o When SIGCHLD arrives, wake up all threads in PS_WAIT_WAIT
    (wait4).

PR:		bin/15328
Reviewed by:	jasone
1999-12-17 00:56:36 +00:00
Jason Evans
e6a5e33c6b Avoid an infinite loop if the last element of the iov array passed to
writev() has an iov_len of 0.

PR:		bin/8281
1999-12-16 22:35:40 +00:00
Daniel Eischen
4fc937ef8f Change signal handling to conform to POSIX specified semantics.
Before this change, a signal was delivered to each thread that
didn't have the signal masked.  Signals also improperly woke up
threads waiting on I/O.  With this change, signals are now
handled in the following way:

  o If a thread is waiting in a sigwait for the signal,
    then the thread is woken up.

  o If no threads are sigwait'ing on the signal and a
    thread is in a sigsuspend waiting for the signal,
    then the thread is woken up.

  o In the case that no threads are waiting or suspended
    on the signal, then the signal is delivered to the
    first thread we find that has the signal unmasked.

  o If no threads are waiting or suspended on the signal,
    and no threads have the signal unmasked, then the signal
    is added to the process wide pending signal set.  The
    signal will be delivered to the first thread that unmasks
    the signal.

If there is an installed signal handler, it is only invoked
if the chosen thread was not in a sigwait.

In the case that multiple threads are waiting or suspended
on a signal, or multiple threads have the signal unmasked,
we wake up/deliver the signal to the first thread we find.
The above rules still apply.

Reported by:	Scott Hess <scott@avantgo.com>
Reviewed by:	jb, jasone
1999-12-04 22:55:59 +00:00
Doug Rabson
3c085f72bb * Fix the stack allocation code so that it works for alpha. Change it
to use mmap(..., MAP_STACK, ...) on alpha too since that should work
  now.
* Add hooks to allow GDB to access the internals of pthreads without
  having to know the exact layout of struct pthread.

Reviewed by: deischen
1999-11-28 19:47:43 +00:00
Alfred Perlstein
7285bccf1a add pthread_cancel, obtained from OpenBSD.
eischen (Daniel Eischen) added wrappers to protect against cancled
threads orphaning internal resources.

the cancelability code is still a bit fuzzy but works for test
programs of my own, OpenBSD's and some examples from ORA's books.

add readdir_r to both libc and libc_r

add some 'const' attributes to function parameters

Reviewed by: eischen, jasone
1999-11-28 05:38:13 +00:00
Poul-Henning Kamp
9b962c56a4 General clean-up of socket.h and associated sources to synchronise up
with NetBSD and the Single Unix Specification v2.

This updates some structures with other, almost equivalent types and
effort is under way to get the whole more consistent.

Also removes a double definition of INET6 and some other clean-ups.

Reviewed by: green, bde, phk
Some part obtained from: NetBSD, SUSv2 specification
1999-11-24 20:49:04 +00:00
Marcel Moolenaar
74562f1a2a Add the proper headers so that the SIGNOTEMPTY and SIGSETAND
macros are defined.
1999-09-30 14:51:31 +00:00
Marcel Moolenaar
3cf3c5d9dd sigset_t change (part 5 of 5)
-----------------------------

Most of the userland changes are in libc. For both the alpha
and the i386 setjmp has been changed to accomodate for the
new sigset_t. Internally, libc is mostly rewritten to use the
new syscalls. The exception is in compat-43/sigcompat.c

The POSIX thread library has also been rewritten to use the
new sigset_t. Except, that it currently only handles NSIG
signals instead of the maximum _SIG_MAXSIG. This should not
be a problem because current applications don't use any
signals higher than NSIG.

There are version bumps for the following libraries:
  libdialog
  libreadline
  libc
  libc_r
  libedit
  libftpio
  libss

These libraries either a) have one of the modified structures
visible in the interface, or b) use sigset_t internally and
may cause breakage if new binaries are used against libraries
that don't have the sigset_t change. This not an immediate
issue, but will be as soon as applications start using the
new range to its fullest.

NOTE: libncurses already had an version bump and has not been
      given one now.

NOTE: doscmd is a real casualty and has been disconnected for
      the moment. Reconnection will eventually happen after
      doscmd has been fixed. I'm aware that being the last one
      to touch it, I'm automaticly promoted to being maintainer.
      According to good taste this means that I will receive a
      badge which either will be glued or mechanically stapled,
      drilled or otherwise violently forced onto me :-)

NOTE: pcvt/vttest cannot be compiled with -traditional. The
      change cause sys/types to be included along the way which
      contains the const and volatile modifiers. I don't consider
      this a solution, but more a workaround.
1999-09-29 15:18:46 +00:00
Dmitrij Tejblum
ffd73a0043 Fix a memory leak: free the thread-specific poll_data, used in the select()
implementation.

PR:		13368
Submitted by:	Steve Bernacki, Jr. <steve@copacetic.net>
1999-08-30 15:45:42 +00:00
Daniel Eischen
3e12058d25 When checking for valid timevals in the wrapped select() and poll()
routines, don't return EINVAL but set errno to EINVAL and return -1.
Added a check in pthread_cond_timedwait for a null timespec pointer.
1999-08-30 00:02:08 +00:00
Peter Wemm
7f3dea244c $Id$ -> $FreeBSD$ 1999-08-28 00:22:10 +00:00
Alfred Perlstein
89f6acf96a move sanity check of timeval struct so as not to segfault when passed
a null pointer.

Pointed out by: Thomas Gellekum <tg@ihf.rwth-aachen.de>
Reviewed by:    eivind
1999-08-20 21:06:20 +00:00
John Birrell
e4065e8294 When checking if there is a stack to free, observe the fact that it
might have been mmapped, and if so, passing the pointer to free() is
really not a good idea.

[ In the next millenium, when I've taken over the world, I'm going
  to ban 8 character tabs. You've been warned. ]
1999-08-20 12:17:09 +00:00
Alfred Perlstein
4c263f605c time_to_sleep->tv_nsec > 1000000000
-to-
time_to_sleep->tv_nsec >= 1000000000
1999-08-19 23:18:07 +00:00
Alfred Perlstein
91518882e0 Sanity check time structures passed in, return EINVAL like the system
calls do to avoid corrupting the thread library's concept of wakeup
time.

PR:		kern/12141
Reviewed by:	deischen, eivind
1999-08-19 23:06:11 +00:00
Alfred Perlstein
c81c6baf1d handle under/overflow of time values in a more robust manner,
there may be an overflow that need to be adjusted more than once.

Pointed out by: Fabian Thylmann <fthylmann@stats.net>

Reviewed by:	eivind, jb
1999-08-19 16:49:53 +00:00
Ralf S. Engelschall
526148f2b9 Fix description of the _thread_autoinit_dummy_decl trick. 1999-08-17 09:50:21 +00:00
Daniel Eischen
936aa6b443 Add check for runnable threads before polling file descriptors.
Submitted by:	tegge
1999-08-12 19:34:39 +00:00
Daniel Eischen
fa7c4d5575 Add RCS IDs to those files without them.
Fix copyrights (s/REGENTS/AUTHOR).

Suggested by:	tg
Approved by:	jb
1999-08-05 12:15:30 +00:00
Daniel Eischen
8b5d18ec76 Fix thread initialization to allow for the case where stdio file
descriptors are not opened.

PR:		bin/12853
Reviewed by:	jb
1999-08-05 12:08:10 +00:00
Dmitrij Tejblum
6ff19e189d Use USRSTACK (defined in <machine/vmparam.h>) to get top of the initial stack.
PTHREAD_STACK_TOP was wrong for all supported architectures.
1999-07-12 16:09:30 +00:00
Jason Evans
66da783384 Fix a couple more coding style nits. 1999-07-11 06:06:52 +00:00
Jason Evans
34582929f1 Modify previous changes to conform better to libc_r's coding style.
Always use mmap() for default-size stack allocation.  Use MAP_ANON instead
of MAP_STACK on the alpha architecture.

Reduce the amount of code executed while owning _gc_mutex during stack
allocation.
1999-07-11 05:56:37 +00:00
Jason Evans
876cc3dae0 Always use growable thread stacks on the i386. The VM_STACK kernel option
must be made default for the alpha before growable thread stacks are
enabled for the alpha.
1999-07-06 00:25:38 +00:00
Jason Evans
ecaa6e8c9e Use growable stacks for thread stacks that are the default stack size.
Cache discarded default thread stacks for use in subsequent thread creations.

Create a red zone at the end of each stack (including the initial thread
stack), with the hope of causing a segfault if a stack overflows.

To activate these modifications, add -D_PTHREAD_GSTACK to CFLAGS in
src/lib/libc_r/Makefile.  Since the modifications depend on the VM_STACK
kernel option, I'm not sure how to safely use growable stacks by default.

Testing, as well as algorithmic and stylistic comments are welcome.
1999-07-05 00:35:19 +00:00
Dmitrij Tejblum
db06cf96d5 Defer signals, so we will not wait for SIGCHLD after it was delivered. 1999-06-29 19:57:07 +00:00
Dmitrij Tejblum
2467b7977b Fix few warnings on the alpha. 1999-06-23 15:01:22 +00:00
John Birrell
02292f131a In the words of the author:
o The polling mechanism for I/O readiness was changed from
    select() to poll().  In additon, a wrapped version of poll()
    is now provided.

  o The wrapped select routine now converts each fd_set to a
    poll array so that the thread scheduler doesn't have to
    perform a bitwise search for selected fds each time file
    descriptors are polled for I/O readiness.

  o The thread scheduler was modified to use a new queue (_workq)
    for threads that need work.  Threads waiting for I/O readiness
    and spinblocks are added to the work queue in addition to the
    waiting queue.  This reduces the time spent forming/searching
    the array of file descriptors being polled.

  o The waiting queue (_waitingq) is now maintained in order of
    thread wakeup time.  This allows the thread scheduler to
    find the nearest wakeup time by looking at the first thread
    in the queue instead of searching the entire queue.

  o Removed file descriptor locking for select/poll routines.  An
    application should not rely on the threads library for providing
    this locking; if necessary, the application should use mutexes
    to protect selecting/polling of file descriptors.

  o Retrieve and use the kernel clock rate/resolution at startup
    instead of hardcoding the clock resolution to 10 msec (tested
    with kernel running at 1000 HZ).

  o All queues have been changed to use queue.h macros.  These
    include the queues of all threads, dead threads, and threads
    waiting for file descriptor locks.

  o Added reinitialization of the GC mutex and condition variable
    after a fork.  Also prevented reallocation of the ready queue
    after a fork.

  o Prevented the wrapped close routine from closing the thread
    kernel pipes.

  o Initialized file descriptor table for stdio entries at thread
    init.

  o Provided additional flags to indicate to what queues threads
    belong.

  o Moved TAILQ initialization for statically allocated mutex and
    condition variables to after the spinlock.

  o Added dispatching of signals to pthread_kill.  Removing the
    dispatching of signals from thread activation broke sigsuspend
    when pthread_kill was used to send a signal to a thread.

  o Temporarily set the state of a thread to PS_SUSPENDED when it
    is first created and placed in the list of threads so that it
    will not be accidentally scheduled before becoming a member
    of one of the scheduling queues.

  o Change the signal handler to queue signals to the thread kernel
    pipe if the scheduling queues are protected.  When scheduling
    queues are unprotected, signals are then dequeued and handled.

  o Ensured that all installed signal handlers block the scheduling
    signal and that the scheduling signal handler blocks all
    other signals.  This ensures that the signal handler is only
    interruptible for and by non-scheduling signals.  An atomic
    lock is used to decide which instance of the signal handler
    will handle pending signals.

  o Removed _lock_thread_list and _unlock_thread_list as they are
    no longer used to protect the thread list.

  o Added missing RCS IDs to modified files.

  o Added checks for appropriate queue membership and activity when
    adding, removing, and searching the scheduling queues.  These
    checks add very little overhead and are enabled when compiled
    with _PTHREADS_INVARIANTS defined.  Suggested and implemented
    by Tor Egge with some modification by me.

  o Close a race condition in uthread_close.  (Tor Egge)

  o Protect the scheduling queues while modifying them in
    pthread_cond_signal and _thread_fd_unlock.  (Tor Egge)

  o Ensure that when a thread gets a mutex, the mutex is on that
    threads list of owned mutexes.  (Tor Egge)

  o Set the kernel-in-scheduler flag in _thread_kern_sched_state
    and _thread_kern_sched_state_unlock to prevent a scheduling
    signal from calling the scheduler again.  (Tor Egge)

  o Don't use TAILQ_FOREACH macro while searching the waiting
    queue for threads in a sigwait state, because a change of
    state destroys the TAILQ link.  It is actually safe to do
    so, though, because once a sigwaiting thread is found, the
    loop ends and the function returns.  (Tor Egge)

  o When dispatching signals to threads, make the thread inherit
    the signal deferral flag of the currently running thread.
    (Tor Egge)

Submitted by: Daniel Eischen <eischen@vigrid.com> and
              Tor Egge <Tor.Egge@fast.no>
1999-06-20 08:28:48 +00:00
John Birrell
994d9b67a5 Added a missing comma to the static condition variable initialisation
definition.

Submitted by: David Leonard <David.Leonard@csee.uq.edu.au>, an OpenBSD guy.
1999-05-24 07:22:55 +00:00
John Birrell
eb9dc34d8b Fix a problem with static initialisation of mutexes and condition
variables.

Submitted by: Dan Eischen <eischen@vigrid.com>
1999-05-23 10:55:33 +00:00
John Birrell
65d33b21e6 Ensure that an existing thread gets it's state set to PS_DEAD to
prevent being rescheduled.

Submitted by: Dan Eischen <eischen@vigrid.com>
1999-05-16 05:25:37 +00:00
Nate Williams
283f072c78 - Fixed bug where we NULL'd before we freed the data causing a memory leak.
Submitted by:	 Ralf S. Engelschall
Obtained from:	PR i386/11713
1999-05-14 21:36:16 +00:00
Jason Evans
c578efe575 Back out patch for cond_timedwait() bug from -current, since other changes
have made the patch obsolete, as pointed out by Daniel Eischen
<eischen@vigrid.com>.

PR:		bin/8872
1999-05-08 07:50:05 +00:00
Jason Evans
a1aefaec27 Apply patch included in bin/8872. This fixes a bug that occurs when
pthread_cond_timedwait() times out.

PR:		bin/8872
Submitted by:	Jason Evans <jasone@canonware.com>
Reviewed by:	David Schwartz <davids@webmaster.com>
1999-05-07 07:59:44 +00:00
John Birrell
58a7cc5d1b [ The author's description... ]
o Runnable threads are now maintained in priority queues.  The
    implementation requires two things:

      1.) The priority queues must be protected during insertion
          and removal of threads.  Since the kernel scheduler
          must modify the priority queues, a spinlock for
          protection cannot be used.   The functions
          _thread_kern_sched_defer() and _thread_kern_sched_undefer()
          were added to {un}defer kernel scheduler activation.

      2.) A thread (active) priority change can be performed only
          when the thread is removed from the priority queue.  The
          implementation uses a threads active priority when
          inserting it into the queue.

    A by-product is that thread switches are much faster.  A
    separate queue is used for waiting and/or blocked threads,
    and it is searched at most 2 times in the kernel scheduler
    when there are active threads.  It should be possible to
    reduce this to once by combining polling of threads waiting
    on I/O with the loop that looks for timed out threads and
    the minimum timeout value.

  o Functions to defer kernel scheduler activation were added.  These
    are _thread_kern_sched_defer() and _thread_kern_sched_undefer()
    and may be called recursively.  These routines do not block the
    scheduling signal, but latch its occurrence.  The signal handler
    will not call the kernel scheduler when the running thread has
    deferred scheduling, but it will be called when running thread
    undefers scheduling.

  o Added support for _POSIX_THREAD_PRIORITY_SCHEDULING.  All the
    POSIX routines required by this should now be implemented.
    One note, SCHED_OTHER, SCHED_FIFO, and SCHED_RR are required
    to be defined by including pthread.h.  These defines are currently
    in sched.h.  I modified pthread.h to include sched.h but don't
    know if this is the proper thing to do.

  o Added support for priority protection and inheritence mutexes.
    This allows definition of _POSIX_THREAD_PRIO_PROTECT and
    _POSIX_THREAD_PRIO_INHERIT.

  o Added additional error checks required by POSIX for mutexes and
    condition variables.

  o Provided a wrapper for sigpending which is marked as a hidden
    syscall.

  o Added a non-portable function as a debugging aid to allow an
    application to monitor thread context switches.  An application
    can install a routine that gets called everytime a thread
    (explicitly created by the application) gets context switched.
    The routine gets passed the pthread IDs of the threads that are
    being switched in and out.

Submitted by: Dan Eischen <eischen@vigrid.com>

Changes by me:

  o Added a PS_SPINBLOCK state to deal with the priority inversion
    problem most often (I think) seen by threads calling malloc/free/realloc.

  o Dispatch signals to the running thread directly rather than at a
    context switch to avoid the situation where the switch never occurs.
1999-03-23 05:07:56 +00:00
John Birrell
0883c4c31b Increase the size of private thread flags so that the test for a
thread trying to call pthread_exit() from a cleanup handler actually
works.

Submitted by: David Leonard <david.leonard@csee.uq.edu.au> OpenBSD
1999-01-15 00:21:03 +00:00
Warner Losh
d0c4729014 Fix a minor security problem in libc_r.
Submitted by: Alexandre Snarskii <snar@paranoia.ru>
Approved by: John Birrell
Reminded me that I'd been sitting on this too long: snar@paranoia.ru
1999-01-11 00:02:37 +00:00
Eivind Eklund
07bab7c6a4 Add support for pthread_mutexattr_settype(). As a side effect of
testing this, fix MUTEX_TYPE_COUNTING_FAST.  Recursive locks now work.
1998-11-28 23:52:58 +00:00
John Birrell
4896148e72 Interrupt threads waiting in select etc.
Submitted by: Alec Wolman <wolman@cs.washington.edu>
1998-11-15 10:01:34 +00:00
John Birrell
e7b7b3f3de Close a window between unlocking a spinlock and changing the thread state. 1998-11-15 09:58:26 +00:00
Dmitrij Tejblum
171a7528a8 Don't call pthread_mutex_lock with _SPINLOCK held.
Made pthread_cond_wait() more similar to pthread_cond_timedwait().

PR:		8375
1998-11-06 21:04:02 +00:00
Dmitrij Tejblum
4b12016bab Fix some bugs in pthread scheduler:
make pthread_yield() more reliable,
  threads always (I hope) preempted at least every 0.1 sec, as intended.

PR:		bin/7744
Submitted by:	"Richard Seaman, Jr." <dick@tar.com>
1998-10-09 19:01:30 +00:00
Dmitrij Tejblum
60abf62bfa Debug when an environment variable set, no when it is unset. 1998-09-30 19:17:51 +00:00
John Birrell
f51ea46d24 Fix a comment. 1998-09-30 06:42:29 +00:00
John Birrell
d3bb66886d Cosmetic cleansing. This code requires extra work to keep the garbage
collector thread running after a fork.
1998-09-30 06:41:16 +00:00
John Birrell
dc3a8b52c0 Move the cleanup code that frees memory allocated for a dead thread from
the thread kernel into a garbage collector thread which is started when
the fisrt thread is created (other than the initial thread). This
removes the window of opportunity where a context switch will cause a
thread that has locked the malloc spinlock, to enter the thread kernel,
find there is a dead thread and try to free memory, therefore trying
to lock the malloc spinlock against itself.

The garbage collector thread acts just like any other thread, so
instead of having a spinlock to control accesses to the dead thread
list, it uses a mutex and a condition variable so that it can happily
wait to be signalled when a thread exists.
1998-09-30 06:36:56 +00:00
John Birrell
05f3e91279 Use snprintf instead of sprintf to avoid long source file paths from
launching an application into space when someone tries to debug it.

The dead thread list now has it's own link pointer, so use that when
reporting the grateful dead.
1998-09-30 06:29:54 +00:00
John Birrell
54059e9f3f Implementation of an additional state called SIGWAIT (with the previous
one renamed to SIGSUSPEND) to fix sigwait().

Submitted by: Daniel M. Eischen <eischen@vigrid.com>
1998-09-30 06:27:31 +00:00
John Birrell
92ce833722 NULL a pointer after it is freed to avoid trying to free it again. 1998-09-30 06:24:57 +00:00
John Birrell
a247f83316 - Fix the debug macros.
-  Add support of a thread being listed in the dead thread list as well
   as the thread list.
-  Add a new thread state to make sigwait work properly. (Submitted by
   Daniel M. Eischen <eischen@vigrid.com>)
-  Add global variable for the garbage collector mutex and condition
   variable.
-  Delete a couple of prototypes that are no longer required.
-  Add a prototype for the garbage collector thread.
1998-09-30 06:22:07 +00:00
Dmitrij Tejblum
8ab6008b79 Don't clobber errno if we are not going to fail. 1998-09-13 15:33:42 +00:00
Dmitrij Tejblum
99c167bba4 Don't lock newfd if it is not opened.
PR:		5961
1998-09-13 12:48:47 +00:00
Dmitrij Tejblum
deb9688ae1 In libc_r, rename vfork syscall to _thread_sys_vfork and make vfork an alias
to fork. It is difficult to do real vfork in libc_r, since almost every
operation with file descriptsor changes _thread_fd_table and friends.

popen(3) works much better with this change.
1998-09-12 22:03:20 +00:00
Dmitrij Tejblum
f0f066ec83 Fixed bug, caused threads to wait for locks which nobody hold.
Fixed sign extension bug, caused undefined behavior if FILE live in stack.
1998-09-09 16:50:33 +00:00
Alexander Langer
cecc7b0974 Removed unused variables. 1998-09-07 21:55:01 +00:00
Alexander Langer
e66632a35c Removed some variable initializations which were unnecessary and divergent
from style(9).
1998-09-07 21:07:59 +00:00
Alexander Langer
23424a1f9a -Wall clean. 1998-09-07 19:23:55 +00:00
Alexander Langer
c0e366326f Implement pthread read/write locks as defined by Version 2 of the Single
UNIX Specification.

As with our standard mutexes, process shared locks are not supported at
this time.
1998-09-07 19:01:43 +00:00
John Birrell
5f867deba5 Don't automatically restart syscalls for the signals that the thread
kernel needs.
1998-08-26 20:55:31 +00:00
John Birrell
353a159590 Back out most of the last commit. It created problems with sigpause. 1998-08-26 20:50:42 +00:00
John Birrell
42f37683ee Fix for sigwait problem.
Submitted by: Daniel M. Eischen <eischen@vigrid.com>
PR:           misc/7039
1998-08-25 11:19:14 +00:00
John Polstra
d89bd1ac0f Add missing initialization of the length variable passed to
getsockopt().  Use a separate variable for clarity, instead of
overloading an unrelated variable.
1998-08-12 20:29:29 +00:00
John Birrell
bbf157fac4 Add extra initialisation code that is required for processes that
are started instead of init (pid = 1). This allows an embedded
implementation quite like VxWorks, with (possibly) a single threaded
program running instead of init. The neat thing is that the same threaded
process can run in a multi-user workstation environment too.
1998-08-10 01:24:22 +00:00
Alexander Langer
b4ff1b7295 A style fix for my previous commit. 1998-08-02 23:07:25 +00:00
Alexander Langer
27aa2e8958 Fixed a race condition during the first lock/trylock of a statically
initialized mutex.  Statically initialized mutexes are actually
initialized at first use (pthread_mutex_lock/pthread_mutex_trylock).
To prevent concurrent initialization by multiple threads, all
static initializations are now serialized by a spinlock.

Reviewed by:	jb
1998-08-02 17:04:25 +00:00
Bruce Evans
bcc58f6898 Fixed a printf format error. Didn't fix assumption that sigset_t is
integral.
1998-06-30 18:00:11 +00:00
John Birrell
ff09ba5fbb Add the missing {} that caused the function to return ESRCH if it
had to wait for the thread to exit and if the caller didn't want the
thread exit status.
1998-06-25 00:04:21 +00:00
John Birrell
b9148b8a3e Don't allow a SIGCHLD to wake up a thread if the process has the default
signal handler installed for SIGCHLD. The ACE MT_SOCK_Test was hanging
as the result of being interrupted when it didn't expect to be.
1998-06-17 22:29:12 +00:00
John Birrell
d989fc8faa If a thread is waiting on a child process to complete, the SIGCHLD
signal can arrive before the thread is woken from it's wait4. In this
case, don't return an EINTR, just set the thread state to running and
the wait4 wrapper will loop and get the exit status of the process.
1998-06-17 03:53:16 +00:00
John Birrell
597035b4db If a short write, only loop if no error. 1998-06-14 09:36:14 +00:00
John Birrell
06ca87e9f7 Update the caller's descriptor masks even if there are none ready for
I/O for those applications that don't believe the return value of zero as
meaning that THERE ARE *NO* DESCRIPTORS READY.
1998-06-12 02:17:18 +00:00
John Birrell
8eb25828ad Check the access mode in the flags before waiting on a read or a write
that might never be possible if the file was not opened in the corrent
mode. This prevents a hang for bad programs. Why do people code like that?
1998-06-10 22:28:45 +00:00
John Birrell
aef774b0d5 Remove SA_RESTART from the signal dispatch in user-space since this
seems to be tripping up a lot of applications.
1998-06-10 22:25:18 +00:00
John Birrell
3c165ef7b7 When doing a F_SETFL, read the flags back so that the ones stored
in the file descriptor table are exactly what the kernel knows subject
to the O_NONBLOCK flag being requested by the user.
1998-06-10 22:24:12 +00:00
John Birrell
ddc8afd422 Implement compile time debug support instead of tracking file name and
line number every time a file descriptor is locked.

This looks like a big change but it isn't. It should reduce the size
of libc_r and make it run slightly faster.
1998-06-09 23:21:05 +00:00
John Birrell
a675022188 Add compile time debug instead of doing this all the time. Reduce the
time that a thread keeps the file descriptor table locked. In particular,
perform malloc/free calls outside the lock and handle the situation
where two threads can race to initialise the table entry for the same
file descriptor.
1998-06-09 23:16:53 +00:00
John Birrell
3411c10600 Add support for compile time debug. This is enabled if libc_r is built
with -D_LOCK_DEBUG. This adds the file name and line number to each lock
call and these are stored in the spinlock structure. When using debug
mode, the lock function will check if the thread is trying to lock
something it has already locked. This is not supposed to happen because
the lock will be freed too early.

Without lock debug, libc_r should be smaller and slightly faster.
1998-06-09 23:13:10 +00:00
John Birrell
74ebed9424 POSIX says that pthread_exit() is not allowed to be called from a
cleanup destructor, so trap this case to prevent me from being being
burnt again by applications that try to do this. With this change, an
application (like one using a mis-configured ACE) will exit the process
after displaying a message quoting the POSIX section that the application
has violated.
1998-06-09 23:08:41 +00:00
John Birrell
27949f44dc Add compile time thread lock debug support.
Add a thread specific flag to trap the case where pthread_exit() is
called from a destructor in violation of the Posix standard.
1998-06-09 23:02:43 +00:00
John Birrell
2d8a580416 Add a warning message for a thread locking against itself. This is
not supposed to happen, but I have seen bogus g++ code that causes
it.
1998-06-06 07:27:06 +00:00
John Birrell
c6831395f4 Simplify the handling of thread specific data. Only track if a key
is allocated or not, rather than keeping a count and attempting to
know it it is in-use. POSIX says that once a key is deleted, using the
key again results in undefined behaviour.
1998-06-06 07:24:24 +00:00
John Birrell
c359f976b4 Re-design the thread specific key structure. 1998-06-06 07:20:23 +00:00
John Birrell
717d1611f4 I got the last commit back to front. 1998-06-06 07:02:27 +00:00
John Birrell
756534d117 Fix the signal behaviour for internal states which set the thread
state to running despite the SA_RESTART flag which is really just for
syscalls.
1998-06-05 23:31:55 +00:00
John Birrell
fca35cd32f I shouldn't do things early in the morning.
I shouldn't do things early in the morning.
[...]
I shouldn't do things early in the morning.
1998-06-01 02:14:34 +00:00
John Birrell
382306949d Add some missing syscall wrappers. 1998-05-31 23:48:30 +00:00
John Birrell
5d359b97bb Remove some stale code.
Pointed out by: Amancio
1998-05-31 23:47:06 +00:00
John Birrell
d972680a31 Don't restart a syscall when a SIGCHLD is received by a thread waiting
on a child process.
1998-05-31 23:46:01 +00:00
John Birrell
01029f8f17 Make a copy of the caller's iovec array, mallocing if necessary,
and modify that if the writev() syscall does not completely write
all bytes in a single call.
1998-05-27 00:44:58 +00:00
John Birrell
b46dfe97ae Remove error check from call to set the file descriptor to non-blocking
instead of explicitly ignoring some errors. This allows for the case
where a device is naturally non-blocking.
1998-05-27 00:41:22 +00:00
John Birrell
e5a8a007e1 When doing a blocking write, keep looping until all the bytes are
written without returning to the caller. This only occurs on pipes
where either the number of bytes written is greater than the pipe
buffer or if there is insufficient space in the pipe buffer because the
reader is reading slower than the writer is writing.
1998-05-25 21:45:52 +00:00
John Birrell
9839f9695a Treat the lock value as volatile. 1998-05-05 21:47:58 +00:00
John Birrell
b1ad8d9155 Cleanup in the child, not the parent.
Submitted by: Tor Egge <Tor.Egge@idi.ntnu.no>
1998-05-02 03:42:20 +00:00
John Birrell
96efcebdfc Fix the incremental priority increment.
PR: bin/6467 Marino Ladavac <lada@pc8811.gud.siemens.at>
1998-04-30 21:50:29 +00:00
John Birrell
4a027d50c7 Change signal model to match POSIX (i.e. one set of signal handlers
for the process, not a separate set for each thread). By default, the
process now only has signal handlers installed for SIGVTALRM, SIGINFO
and SIGCHLD. The thread kernel signal handler is installed for other
signals on demand. This means that SIG_IGN and SIG_DFL processing is now
left to the kernel, not the thread kernel.

Change the signal dispatch to no longer use a signal thread, and
call the signal handler using the stack of the thread that has the
signal pending.

Change the atomic lock method to use test-and-set asm code with
a yield if blocked. This introduces separate locks for each type
of object instead of blocking signals to prevent a context
switch. It was this blocking of signals that caused the performance
degradation the people have noted.

This is a *big* change!
1998-04-29 09:59:34 +00:00
John Birrell
312e185f9c Don't need wrappers for longjmp/setjmp anymore. 1998-04-29 09:40:51 +00:00
John Birrell
32664a7064 Remove empty files that were renamed some time ago. 1998-04-29 09:39:34 +00:00
John Birrell
af139b98d4 Allow a thread dump to report the thread's sigmask when in the
PS_SIGWAIT state.
1998-04-17 09:39:37 +00:00