namespace in order to handle lockmgr fields in a controlled way instead
than spreading all around bogus stubs:
- VN_LOCK_AREC() allows lock recursion for a specified vnode
- VN_LOCK_ASHARE() allows lock sharing for a specified vnode
In FFS land:
- BUF_AREC() allows lock recursion for a specified buffer lock
- BUF_NOREC() disallows recursion for a specified buffer lock
Side note: union_subr.c::unionfs_node_update() is the only other function
directly handling lockmgr fields. As this is not simple to fix, it has
been left behind as "sole" exception.
file system. In particular, stop overwriting mount point
flags in nfs_mountdiskless() because now they are set
elsewhere. (They were _initialized_ by that function in
the 4.4BSD days, when mount structures were not allocated
in a centralized manner -- see rev. 1.1 of this file.)
Fix nfs_mount(), which happened to depend on the loss of
MNT_ROOTFS when it came to update handling.
Also note that mountnfs() no longer handles updates. Now
they shouldn't reach this function, so printf a diagnostic
message if that happens due to a coding error.
A couple of notes for this:
* WITNESS support, when enabled, is only used for shared locks in order
to avoid problems with the "disowned" locks
* KA_HELD and KA_UNHELD only exists in the lockmgr namespace in order
to assert for a generic thread (not curthread) owning or not the
lock. Really, this kind of check is bogus but it seems very
widespread in the consumers code. So, for the moment, we cater this
untrusted behaviour, until the consumers are not fixed and the
options could be removed (hopefully during 8.0-CURRENT lifecycle)
* Implementing KA_HELD and KA_UNHELD (not surported natively by
WITNESS) made necessary the introduction of LA_MASKASSERT which
specifies the range for default lock assertion flags
* About other aspects, lockmgr_assert() follows exactly what other
locking primitives offer about this operation.
- Build real assertions for buffer cache locks on the top of
lockmgr_assert(). They can be used with the BUF_ASSERT_*(bp)
paradigm.
- Add checks at lock destruction time and use a cookie for verifying
lock integrity at any operation.
- Redefine BUF_LOCKFREE() in order to not use a direct assert but
let it rely on the aforementioned destruction time check.
KPI results evidently broken, so __FreeBSD_version bumping and
manpage update result necessary and will be committed soon.
Side note: lockmgr_assert() will be used soon in order to implement
real assertions in the vnode namespace replacing the legacy and still
bogus "VOP_ISLOCKED()" way.
Tested by: kris (earlier version)
Reviewed by: jhb
nfs_xid_gen() function instead of duplicating the logic in both
nfsm_rpchead() and the NFS3ERR_JUKEBOX handling in nfs_request().
MFC after: 1 week
Submitted by: mohans (a long while ago)
historical relic, and are no longer appropriate for either LAN or WAN
mounting. At modern (gigabit and 10 gigabit) LAN speeds packet loss
from socket buffer fill events is common, and sequence numbers wrap
quickly enough that data corruption is possible. TCP solves both of
these problems without imposing significant overhead.
MFC after: 1 month
owned by a NULL owner. This will lead consequent VOP_ISLOCKED() present
into nfs_upgrade_vnlock() to panic as it only acquire curthread now.
Fix nfs_upgrade_vnlock() and nfs_downgrade_vnlock() in order to not use
more the struct thread pointer passed as argument (as it is really nomore
required there as vn_lock() and VOP_UNLOCK doesn't get the lock more).
Using curthread, in place, doesn't get ambiguity as LK_EXCLOTHER should
be handled as a "not locked" request by both functions.
Reported by: kris
Tested by: kris
Reviewed by: ups
VOP_ISLOCKED(arg, curthread). Now, VOP_ISLOCKED() and lockstatus() should
only acquire curthread as argument; this will lead in axing the additional
argument from both functions, making the code cleaner.
Reviewed by: jeff, kib
- Remove the "thread" argument from the lockmgr() function as it is
always curthread now
- Axe lockcount() function as it is no longer used
- Axe LOCKMGR_ASSERT() as it is bogus really and no currently used.
Hopefully this will be soonly replaced by something suitable for it.
- Remove the prototype for dumplockinfo() as the function is no longer
present
Addictionally:
- Introduce a KASSERT() in lockstatus() in order to let it accept only
curthread or NULL as they should only be passed
- Do a little bit of style(9) cleanup on lockmgr.h
KPI results heavilly broken by this change, so manpages and
FreeBSD_version will be modified accordingly by further commits.
Tested by: matteo
lockmgr lkp, when held in exclusive mode, is recursed
- Introduce the function BUF_RECURSED() which does the same for bufobj
locks based on the top of lockmgr_recursed()
- Introduce the function BUF_ISLOCKED() which works like the counterpart
VOP_ISLOCKED(9), showing the state of lockmgr linked with the bufobj
BUF_RECURSED() and BUF_ISLOCKED() entirely replace the usage of bogus
BUF_REFCNT() in a more explicative and SMP-compliant way.
This allows us to axe out BUF_REFCNT() and leaving the function
lockcount() totally unused in our stock kernel. Further commits will
axe lockcount() as well as part of lockmgr() cleanup.
KPI results, obviously, broken so further commits will update manpages
and freebsd version.
Tested by: kris (on UFS and NFS)
conjuction with 'thread' argument passing which is always curthread.
Remove the unuseful extra-argument and pass explicitly curthread to lower
layer functions, when necessary.
KPI results broken by this change, which should affect several ports, so
version bumping and manpage update will be further committed.
Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
via a new socket during an NFS operation as that reconnect takes place in
the context of an arbitrary thread with an arbitrary credential. Ideally
we would like to use the mount point's credential for the entire process
of setting up the socket to connect to the NFS server. Since some of the
APIs (sobind(), etc.) only take a thread pointer and infer the credential
from that instead of a direct credential, work around the problem by
temporarily changing the current thread's credential to that of the mount
point while connecting the socket and then reverting back to the original
credential when we are done.
Reviewed by: rwatson
Tested on: UDP, TCP, TCP with forced reconnect
soconnect()) instead of &thread0 when establishing a connection to the NFS
server. Otherwise inconsistent credentials may be used when setting up
the NFS socket.
MFC after: 1 week
Reviewed by: rwatson
Remove this argument and pass curthread directly to underlying
VOP_LOCK1() VFS method. This modify makes the code cleaner and in
particular remove an annoying dependence helping next lockmgr() cleanup.
KPI results, obviously, changed.
Manpage and FreeBSD_version will be updated through further commits.
As a side note, would be valuable to say that next commits will address
a similar cleanup about VFS methods, in particular vop_lock1 and
vop_unlock.
Tested by: Diego Sardina <siarodx at gmail dot com>,
Andrea Di Pasquale <whyx dot it at gmail dot com>
server-side RPC retranmission cache for non-idempotent operations: these
hacks substituted 0 (success) for the expected EEXIST in the event that
a target name already existed for LINK, SYMLINK, and MKDIR operations,
under the assumption that EEXIST represented a second application of the
original RPC rather than a true failure.
Background: certain NFS operations (in this case, LINK, SYMLINK, and
MKDIR) are not idempotent, as they leave behind persisting state on the
server that prevents them from being replayed without an error;if an UDP
RPC reply is lost leading to a retransmission by theclient, the second
reply will return EEXIST rather than success, asthe new object has
already been created. The NFS client previouslysilently mapped the
EEXIST return into success to paper over thisproblem.
However, in all modern NFS server implementations, a reply cache is kept
in order to retransmit the original reply to a retransmitted request,
rather than performing the operation a second time, allowing this hack
to be avoided. This allows link()-based filelocking over NFS to operate
correctly, as an application requestingthe creation of a new link for a
file to tell if it succeededatomically or not.
Other NFS clients, including Solaris and Linux, generally follow this
behavior for the same reasons. Most clients also now default to TCP,
which also helps avoid the issue of retransmitted but non-idempotent
requests in most cases.
Reported by: Adam McDougall <mcdouga9 at egr dot msu dot edu>,
Timo Sirainen <tss at iki dot fi>
Reviewed by: mohans
MFC after: 1 week
noatime, noexec, suiddir, nosuid, nosymfollow, union,
noclusterr, noclusterw, multilabel, acls, force, update,
async. These options correspond to MOPT_STDOPTS, MOPT_FORCE, MOPT_UPDATE,
and MOPT_ASYNC.
Currently, mount_nfs converts these "-o" options from strings
to MNT_ flags via getmntopts(),
and passes the flags from userspace to the kernel.
This change will allow us in future to pass these mount options
as strings directly to the kernel via nmount() when doing NFS mounts.
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.
- Eliminate the hideous nfs_sndlock that serialized NFS/TCP request senders
thru the sndlock.
- Institute a new nfs_connectlock that serializes NFS/TCP reconnects. Add
logic to wait for pending request senders to finish sending before
reconnecting. Dial down the sb_timeo for NFS/TCP sockets to 1 sec.
- Break out the nfs xid manipulation under a new nfs xid lock, rather than
over loading the nfs request lock for this purpose.
- Fix some of the locking in nfs_request.
Many thanks to Kris Kennaway for his help with this and for initiating the
MP scaling analysis and work. Kris also tested this patch thorougly.
Approved by: re@ (Ken Smith)
timeout occurring at exactly the same time. If this happens, the nfsiod
exits although there may be a queued async IO request for it.
Found by : Kris Kennaway
Approved by: re
previously conditionally acquired Giant based on debug.mpsafenet. As that
has now been removed, they are no longer required. Removing them
significantly simplifies error-handling in the socket layer, eliminated
quite a bit of unwinding of locking in error cases.
While here clean up the now unneeded opt_net.h, which previously was used
for the NET_WITH_GIANT kernel option. Clean up some related gotos for
consistency.
Reviewed by: bz, csjp
Tested by: kris
Approved by: re (kensmith)
nfsnode could lead to attrs being stale. One example (that we
ran into) was a READDIR+, WRITE. The responses came back in
order, but the attrs from the WRITE were loaded before the
attrs from the READDIR+, leading to the wrong size from being
read on the next stat() call.
MFC after: 1 week
Submitted by: mohans
Approved by: re (kensmith)
recoverable and unrecoverable. For the former, we redirty the
buffer and hang onto it for future retries. For the latter (eg.
ESTALE), we discard the buffer and return the error back to the
user on the next syscall. This fixes a number of vfs panics and
fixes having a large number of dirty buffers (that cannot be
written out and reclaimed) from hanging around. Thanks to ups@
for discussions on this issue.
Reported by: kris, Kai, others
Approved by: re (kensmith)
Now, we assume no more sched_lock protection for some of them and use the
distribuited loads method for vmmeter (distribuited through CPUs).
Reviewed by: alc, bde
Approved by: jeff (mentor)
td_ru. This removes the requirement for per-process synchronization in
statclock() and mi_switch(). This was previously supported by
sched_lock which is going away. All modifications to rusage are now
done in the context of the owning thread. reads proceed without locks.
- Aggregate exiting threads rusage in thread_exit() such that the exiting
thread's rusage is not lost.
- Provide a new routine, rufetch() to fetch an aggregate of all rusage
structures from all threads in a process. This routine must be used
in any place requiring a rusage from a process prior to it's exit. The
exited process's rusage is still available via p_ru.
- Aggregate tick statistics only on demand via rufetch() or when a thread
exits. Tick statistics are kept in the thread and protected by sched_lock
until it exits.
Initial patch by: attilio
Reviewed by: attilio, bde (some objections), arch (mostly silent)
Probabilly, a general approach is not the better solution here, so we should
solve the sched_lock protection problems separately.
Requested by: alc
Approved by: jeff (mentor)
lock and unlock conditionally, not just set the flag on it conditionally.
In practice, this bug couldn't manifest, as in the current revision of
the code, no callers pass a NULL rep.
CID: 1416
Found with: Coverity Prevent(tm)
vmcnts. This can be used to abstract away pcpu details but also changes
to use atomics for all counters now. This means sched lock is no longer
responsible for protecting counts in the switch routines.
Contributed by: Attilio Rao <attilio@FreeBSD.org>
- Fix for a bug where a close would not wait for all (directio)
dirty buffers to drain. The nfsnode was not marked NMODIFIED
when there were directio dirtied buffers pending, causing this.
- No reason to vhold/vrele the vp when enqueueing DirectIO requests
for the nfsiods. The vnode can't really go way since the close
has to wait for these requests to drain.
MFC after: 1 week
Submitted by: mohans
- Replace PRIV_NFSD with PRIV_NFS_DAEMON, add PRIV_NFS_LOCKD.
- Use PRIV_NFS_DAEMON in the NFS server.
- In the NFS client, move the privilege check from nfslockdans(), which
occurs every time a write is performed on /dev/nfslock, and instead do it
in nfslock_open() just once. This allows us to avoid checking the saved
uid for root, and just use the effective on open. Use PRIV_NFS_LOCKD.
late stages of unmount). On failure, the vnode is recycled.
Add insmntque1(), to allow for file system specific cleanup when
recycling vnode on failure.
Change getnewvnode() to no longer call insmntque(). Previously,
embryonic vnodes were put onto the list of vnode belonging to a file
system, which is unsafe for a file system marked MPSAFE.
Change vfs_hash_insert() to no longer lock the vnode. The caller now
has that responsibility.
Change most file systems to lock the vnode and call insmntque() or
insmntque1() after a new vnode has been sufficiently setup. Handle
failed insmntque*() calls by propagating errors to callers, possibly
after some file system specific cleanup.
Approved by: re (kensmith)
Reviewed by: kib
In collaboration with: kib
GETATTRs being generated - one from lookup()/namei() and the other
from nfs_open() (for cto consistency). This change eliminates the
GETATTR in nfs_open() if an otw GETATTR was done from the namei()
path. Instead of extending the vop interface, we timestamp each attr
load, and use this to detect whether a GETATTR was done from namei()
for this syscall. Introduces a thread-local variable that counts the
syscalls made by the thread and uses <pid, tid, thread syscalls> as
the attrload timestamp. Thanks to jhb@ and peter@ for a discussion on
thread state that could be used as the timestamp with minimal overhead.
SOCK_DGRAM (i.e. UDP), respect the value configured earlier. This allows
TCP NFS root mounts using e.g. the boot.nfsroot.options="tcp" tunable.
In this case some of the connection parameters like the retry timer were
previously set appropriately for TCP but inappropriately for the UDP
socket that was actually used, leading to e.g. extremely long recovery
times (O(hours)) after a nfs server reboot.
Reviewed by: mohans
MFC After: 2 weeks
of duplicating it except for larger style bugs in the copy.
Fix some nearby style bugs (including a harmless type mismatch)
in and near the remaining copy.
This is part of fixing collisions of the 2 nfs*client's names. Even
static names should have a unique prefixes so that they can be debugged
easily.
file are after snaplock, while other ffs device buffers are before
snaplock in global lock order. By itself, this could cause deadlock
when bdwrite() tries to flush dirty buffers on snapshotted ffs. If,
during the flush, COW activity for snapshot needs to allocate block
and ffs_alloccg() selects the cylinder group that is being written
by bdwrite(), then kernel would panic due to recursive buffer lock
acquision.
Avoid dealing with buffers in bdwrite() that are from other side of
snaplock divisor in the lock order then the buffer being written. Add
new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in
the bdwrite(). Default implementation, bufbdflush(), refactors the code
from bdwrite(). For ffs device buffers, specialized implementation is
used.
Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes)
Tested by: Peter Holm
X-MFC after: 3 weeks (if ever: it changes ABI)
This is easy to reproduce for EROFS. I am not sure if the attrs can be corrupt
for other NFS error responses. For now, disabling wcc pre-op attr checks and
post-op attr loads on NFS errors (sysctl'ed).
Reported by: Kris Kennaway
vnode into the vfs hash. Otherwise, another thread walking the hash can trip
on an nfsnode with an uninitialized or partially initialized fh.
Thanks to ups@ for spotting this race.
have to explicitly acquire Giant (although they need to be aware of this and
not hold any locks at that point). Remove the acquisitions of Giant in the
NFS client wrapping tprintf().
file. Leave the loser's lock(s) initialized, so the reclaim logic can
unconditionally destroy them when that race occurs (or if the vfs hash
insert happened to fail for some other reason). Thanks to ups@ for a
careful review of the code.
Reported by : Kris Kennaway
2) Reduce the acquisitions of the Giant lock in the nfs_socket.c paths significantly.
- We don't need to acquire Giant before tsleeping on lbolt anymore,
since jhb specialcased lbolt handling in msleep.
- nfs_up() needs to acquire Giant only if printing the "server up"
message.
- nfs_timer() held Giant for the duration of the NFS timer processing,
just because the printing of the message in nfs_down() needed it
(and we acquire other locks in nfs_timer()). The acquisition of
Giant is moved down into nfs_down() now, reducing the time Giant is
held in that path.
Reported by: Kris Kennaway
This bug results in data corruption with NFS/TCP. Writes are silently dropped
on EWOULDBLOCK (because socket send buffer is full and sockbuf timer fires).
Reviewed by: ups@
VA_MARK_ATIME feature to fix POSIX conformance fore execve() and mmap(),
we thought that it was optimized well enough for the one file system
that supports it (ffs) and harmless for other file systems (except
layered ones which already get the layering for VOP_SETATTR() wrong).
However, nfs_setattr() doesn't do much parameter checking, so when
it gets a combination of parameters that it doesn't understand, it
always does a Setattr RPC. This RPC can't do anything good, and for
VA_MARK_ATIME it is null except for wasting a lot of time.
This is the smallest and easiest to fix of several bugs that have
increased the number of RPCs for kernel builds on nfs by more than
100% since 2004-11-05. The real-time increase depends on network
latency and parallelization and can also be very large (approaching
the same percentage for unparallelized operations like "make depend"
on systems with fast CPUs and high-latency networks).
sync() and sync_fsync() without losing MNT_ASYNC. Add MNTK_ASYNC flag
which is set only when MNT_ASYNC is set and mnt_noasync is zero, and
check that flag instead of MNT_ASYNC before initiating async io.
adds a FS type specific flag indicating that the FS supports shared
vnode lock lookups, adds some logic in vfs_lookup.c to test this flag
and set lock flags appropriately.
- amd on 6.x is a non-starter (without this change). Using amd under
heavy load results in a deadlock (with cascading vnode locks all the
way to the root) very quickly.
- This change should also fix the more general problem of cascading
vnode deadlocks when an NFS server goes down.
Ideally, we wouldn't need these changes, as enabling shared vnode lock
lookups globally would work. Unfortunately, UFS, for example isn't
ready for shared vnode lock lookups, crashing pretty quickly.
This change is the result of discussions with Stephan Uphoff (ups@).
Reviewed by: ups@
synchronized by the lock on the object containing the page.
Transition PG_WANTED and PG_SWAPINPROG to use the new field,
eliminating the need for holding the page queues lock when setting
or clearing these flags. Rename PG_WANTED and PG_SWAPINPROG to
VPO_WANTED and VPO_SWAPINPROG, respectively.
Eliminate the assertion that the page queues lock is held in
vm_page_io_finish().
Eliminate the acquisition and release of the page queues lock
around calls to vm_page_io_finish() in kern_sendfile() and
vfs_unbusy_pages().
set the MTU prior to mounting root via NFS. This is required if the
server supports a higher than default MTU because the client will not
see the responses otherwise.
MFC after: 3 weeks
soreceive(), and sopoll(), which are wrappers for pru_sosend,
pru_soreceive, and pru_sopoll, and are now used univerally by socket
consumers rather than either directly invoking the old so*() functions
or directly invoking the protocol switch method (about an even split
prior to this commit).
This completes an architectural change that was begun in 1996 to permit
protocols to provide substitute implementations, as now used by UDP.
Consumers now uniformly invoke sosend(), soreceive(), and sopoll() to
perform these operations on sockets -- in particular, distributed file
systems and socket system calls.
Architectural head nod: sam, gnn, wollman
in nfs_strategy. Otherwise, for some buffers, signals would be ignored
at the intr mounts.
Reviewed by: mohan
MFC after: 1 month
Approved by: kan (mentor)
except in places dealing with ifaddr creation or destruction; and
in such special places incomplete ifaddrs should never be linked
to system-wide data structures. Therefore we can eliminate all the
superfluous checks for "ifa->ifa_addr != NULL" and get ready
to the system crashing honestly instead of masking possible bugs.
Suggested by: glebius, jhb, ru
If B_NOCACHE is set the pages of vm backed buffers will be invalidated.
However clean buffers can be backed by dirty VM pages so invalidating them
can lead to data loss.
Add support for flush dirty page in the data invalidation function
of some network file systems.
This fixes data losses during vnode recycling (and other code paths
using invalbuf(*,V_SAVE,*,*)) for data written using an mmaped file.
Collaborative effort by: jhb@,mohans@,peter@,ps@,ups@
Reviewed by: tegge@
MFC after: 7 days
client into the kernel by default, and many users won't use NFS,
don't start an extra 4 kernel threads that are unused. Once NFS
becomes active, it will start nfsiod's as it needs them.
We might consider mandating a minimum iod's equal to the number of
active NFS mounts (truncated to some value), which would force some
to remain available without having to create a new one if the file
system is mostly inactive.
PR: 70880
MFC after: 2 weeks
Prodded by: cel
Head nod: peter
Pointed out by: Joe <fbsd_user at a1poweruser dot com>
mimicing the NFS reference implementation.
NFS over TCP does not need fast retransmit timeouts, since network loss
and congestion are managed by the transport (TCP), unlike with NFS over
UDP. A long timeout prevents the unnecessary retransmission of non-
idempotent NFS requests.
Reviewed by: mohans, silby, rees?
Sponsored by: Network Appliance, Incorporated
the estimator to be more easily tuned and maintained.
There should be no functional change except there is now a lower limit
on the retransmit timeout to prevent the client from retransmitting
faster than the server's disks can fill requests, and an upper limit
to prevent the estimator from taking to long to retransmit during a
server outage.
Reviewed by: mohan, kris, silby
Sponsored by: Network Appliance, Incorporated
vnode after vflush() has succeeded. This would cause a dangling vnode
panic at unmount time otherwise. Other filesystems may have this problem
via their VFS_VGET() routines.
Found by: kris
Sponsored by: Isilon Systems, Inc.
The bug was that earlier, if a request was retransmitted,
we would do subsequent retransmits every 10 msecs.
This can cause data corruption under moderate loads by reordering
operations as seen by the client NFS attribute cache, and on the
server side when the retransmission occurs after the original request
has left the duplicate cache, since the operation will be committed
for a second time.
Further work on retransmission handling is needed (e.g. they are still
being done sent too often since they are scaled by HZ, and the size of
the dup cache is too small and easily overwhelmed on busy servers).
Submitted by: mohans
request, the FreeBSD NFS client will quickly back off to a excessively
long wait (days, then weeks) before retrying the request.
Change the behavior of the FreeBSD NFS client to match the behavior of
the reference NFS client implementation (Solaris). This provides a fixed
delay of 10 seconds between each retry by default. A sysctl, called
nfs3_jukebox_delay, is now available to tune the delay. Unlike Solaris,
the sysctl value on FreeBSD is in seconds, rather than in HZ.
Sponsored by: Network Appliance, Incorporated
Reviewed by: rick
Approved by: silby
MFC after: 3 days
The client's READDIRPLUS logic skips the attributes and
filehandle of the ".." entry. If the server doesn't send
attributes but does send a filehandle for "..", the
client's logic doesn't account for the extra "value
follows" field that indicates whether the filehandle is
present, causing the remaining entries in the reply
to be ignored.
Sponsored by: Network Appliance, Inc.
Reviewed by: rick, mohans
Approved by: silby
MFC after: 2 weeks
last few days. I tracked it down to the fact that nfs_reclaim()
is setting vp->v_data to NULL _before_ calling vnode_destroy_object().
After silence from the mailing list I checked further and discovered
that ufs_reclaim() is unique among FreeBSD filesystems for calling
vnode_destroy_object() early, long before tossing v_data or much
of anything else, for that matter. The rest, including NFS, appear
to be identical, as if they were just clones of one original routine.
The enclosed patch fixes all file systems in essentially the same
way, by moving the call to vnode_destroy_object() to early in the
routine (before the call to vfs_hash_remove(), if any). I have
only tested NFS, but I've now run for over eighteen hours with the
patch where I wouldn't get past four or five without it.
Submitted by: Frank Mayhar
Requested by: Mohan Srinivasan
MFC After: 1 week
event of an error, does the right thing, in terms of setting
the error flags in the buf header. That fixes a crash from
bstrategy().
- Treat ETIMEDOUT as a "recoverable" error, causing the buffer
to be re-dirtied. ETIMEDOUT can occur on soft mounts, when
the number of retries are exceeded, and we don't want data loss
in that case.
Submitted by: Mohan Srinivasan
buffers *and* there are no buffers queued up for writing. The bug
was that NMODIFIED was being cleared even while there were buffers
scheduled to be written out, which leads to all sorts of interesting
bugs - one where the file could shrink (because of a post-op getattr
load, say) causing data in buffer(s) queued for write to be tossed,
resulting in data corruption.
Submitted by: Mohan Srinivasan
- Prefer '_' to ' ', as it results in more easily parsed results in
memory monitoring tools such as vmstat.
- Remove punctuation that is incompatible with using memory type names
as file names, such as '/' characters.
- Disambiguate some collisions by adding subsystem prefixes to some
memory types.
- Generally prefer lower case to upper case.
- If the same type is defined in multiple architecture directories,
attempt to use the same name in additional cases.
Not all instances were caught in this change, so more work is required to
finish this conversion. Similar changes are required for UMA zone names.
It allows to specify options for NFS root file system.
Currently supported options are: soft, intr, conn, lockd.
I'm adding this functionality mostly for 'lockd' option, which is only
honored when performing the initial mount and will be silently ignored
if used while updating the mount options.
This will allow to use flock(2) without the need of using varmfs or
rpc.lockd and friends.
Example of use:
boot.nfsroot.options="intr,lockd"
MFC after: 2 weeks
as they both interact with the tty code (!MPSAFE) and may sleep if the
tty buffer is full (per comment).
Modify all consumers of uprintf() and tprintf() to hold Giant around
calls into these functions. In most cases, this means adding an
acquisition of Giant immediately around the function. In some cases
(nfs_timer()), it means acquiring Giant higher up in the callout.
With these changes, UFS no longer panics on SMP when either blocks are
exhausted or inodes are exhausted under load due to races in the tty
code when running without Giant.
NB: Some reduction in calls to uprintf() in the svr4 code is probably
desirable.
NB: In the case of nfs_timer(), calling uprintf() while holding a mutex,
or even in a callout at all, is a bad idea, and will generate warnings
and potential upset. This needs to be fixed, but was a problem before
this change.
NB: uprintf()/tprintf() sleeping is generally a bad ideas, as is having
non-MPSAFE tty code.
MFC after: 1 week
writers that want to extend the file. It was also used to serialize
readers that might want to read the last block of the file (with a
writer extending the file). Now that we support vnode locking for
NFS, the rslock is unnecessary. Writers grab the exclusive vnode
lock before writing and readers grab the shared (or in some cases
the exclusive) lock.
Submitted by: Mohan Srinivasan
- Fix nfsm_disct() so that after pulling up data, the remaining data
is aligned if necessary.
- Fix nfs_clnt_tcp_soupcall() to bcopy() the rpc length out of the
mbuf (instead of casting m_data to a uint32).
Submitted by: Pyun YongHyeon
Reviewed by: Mohan Srinivasan
pending discussion of how implementation would proceed. Applications
like -lc_r expect select(3) to match the EAGAIN-status of IO
functions.
Approved by: re
atomic write request, it can fill the buffer cache with the entirety
of that write in order to handle retries. However, it never drops
the vnode lock, or else it wouldn't be atomic, so it ends up waiting
indefinitely for more buf memory that cannot be gotten as it has it
all, and it waits in an uncancellable state.
To fix this, hibufspace is exported and scaled to a reasonable
fraction. This is used as the limit of how much of an atomic write
request by the NFS client will be handled asynchronously. If the
request is larger than this, it will be turned into a synchronous
request which won't deadlock the system. It's possible this value is
far off from what is required by some, so it shall be tunable as soon
as mount_nfs(8) learns of the new field.
The slowdown between an asynchronous and a synchronous write on NFS
appears to be on the order of 2x-4x.
General nod by: gad
MFC after: 2 weeks
More testing: wes
PR: kern/79208
re-sent instead of timing out.
don't log an error message on reconnection, which is not an error.
remove unused nfs_mrep_before_tsleep.
Reviewed by: Mohan Srinivasan
Approved by: alfred
as they have no connection with the expected MNT_* flags. This bug
was exposed 18 months ago when the assignments to f_flags in
vfs_syscalls.c were moved to before the VFS_STATFS() call. It was
fixed in the CSRG source 10 years ago, but we never picked up that
change.
PR: kern/80390
MFC after: 1 week
the MNT_RDONLY flag if the "ro" option was passed in from userland, and
clears it otherwise. In the diskless case, the MNT_RDONLY flag is already
set when this code is reached, but there are no mount options, so it was
incorrectly cleared. Change the logic so the MNT_RDONLY flag is set if the
"ro" option was specified, and left alone otherwise.
Note that the NFS code will still happily let you mount a filesystem RW
even if the server exports it RO. I'm not sure how to fix that.
- Network filesystems are written with a special idiom that checks the
cache first, and may even unlock dvp before discovering that a network
round-trip is required to resolve the name. I believe dvp is prevented
from being recycled even in the forced unmount case by the shared lock
on the mount point. If not, this code should grow checks for VI_DOOMED
after it relocks dvp or it will access NULL v_data fields.
Sponsored by: Isilon Systems, Inc.
these filesystems will support shared locks until they are explicitly
modified to do so. Careful review must be done to ensure that this
is safe for each individual filesystem.
Sponsored by: Isilon Systems, Inc.
non-maskable).
- The NFS client needs to guard against spurious wakeups
while waiting for the response. ltrace causes the process
under question to wakeup (possibly from ptrace()), which
causes NFS to wakeup from tsleep without the response being
delivered.
Submitted by: Mohan Srinivasan
that NFS ever started using it. Long time ago I added the necessary
vhold()/vdrop() calls to replace it, but forgot to remove the v_id code.
Do it now.
patch from kan@).
Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on
close. This is not yet a generally safe function, but for this very
specific use it is safe. This solves the problem with buffers not
being flushed by unmount or after failed mount attempts.
and tweaks. The code was actually quite broken because it discarded the
upper bits of the 64 bit division. We only had a 50% chance of scaling up
the blocksize for large NFS client mounts when it was needed. For 5.x and
beyond, this was harmless because we could represent the result in either
case. For 4.x this was a big problem though. (4.x also has a df(1) bug to
compound the problem)
I'm not sure why a credential was added to these in the first place, it is
not used anywhere and it doesn't make much sense:
The credentials for syncing a file (ability to write to the
file) should be checked at the system call level.
Credentials for syncing one or more filesystems ("none")
should be checked at the system call level as well.
If the filesystem implementation needs a particular credential
to carry out the syncing it would logically have to the
cached mount credential, or a credential cached along with
any delayed write data.
Discussed with: rwatson
and if the client (erroneously) reads the RPC length as 0 bytes, the
client can loop around in the socket callback. Explicitly check for
the length being 0 case and teardown/re-connect.
Submitted by: Mohan Srinivasan
of sillyrenames (which were limited to 58 per pid per directory,
for no good reason). The new format of sillyrenames looks like
.nfs.0000b31a.00d24.4
^^^^^^^^ ^^^^^
ticks pid
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
Obtained from: Yahoo!
- NFS direct IO completely bypasses the buffer and page caches.
If a file is open for direct IO all caching is disabled.
- Direct IO for Directories will be addressed later.
- 2 new NFS directio related sysctls are added. One is a knob to
disable NFS direct IO completely (direct IO is enabled by default).
The other is to disallow mmaped IO on a file that has at least one
O_DIRECT open (see the comment in nfs_vnops.c for more details).
The default is to allow mmaps on a file that has O_DIRECT opens.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
Obtained from: Yahoo!
ia64) was not the result of a change in the vector operations. It
was caused by the NFS locking code using a FIFO and those bypassing
the vnode. This indirectly caused the panic. The NFS locking code has
been changed.
Requested by: phk
either src or dst) fails. This closes a potential data loss case
(where the fsync failed with ENOSPC, for example).
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
Obtained from: Yahoo!
Kick off a readahead only when sequential access is detected. This
eliminates wasteful readaheads in random file access.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
Obtained from: Yahoo!
split the conversion of the remaining three filesystems out from the root
mounting changes, so in one go:
cd9660:
Convert to nmount.
Add omount compat shims.
Remove dedicated rootfs mounting code.
Use vfs_mountedfrom()
Rely on vfs_mount.c calling VFS_STATFS()
nfs(client):
Convert to nmount (the simple way, mount_nfs(8) is still necessary).
Add omount compat shims.
Drop COMPAT_PRELITE2 mount arg compatibility.
ffs:
Convert to nmount.
Add omount compat shims.
Remove dedicated rootfs mounting code.
Use vfs_mountedfrom()
Rely on vfs_mount.c calling VFS_STATFS()
Remove vfs_omount() method, all filesystems are now converted.
Remove MNTK_WANTRDWR, handling RO/RW conversions is a filesystem
task, and they all do it now.
Change rootmounting to use DEVFS trampoline:
vfs_mount.c:
Mount devfs on /. Devfs needs no 'from' so this is clean.
symlink /dev to /. This makes it possible to lookup /dev/foo.
Mount "real" root filesystem on /.
Surgically move the devfs mountpoint from under the real root
filesystem onto /dev in the real root filesystem.
Remove now unnecessary getdiskbyname().
kern_init.c:
Don't do devfs mounting and rootvnode assignment here, it was
already handled by vfs_mount.c.
Remove now unused bdevvp(), addaliasu() and addalias(). Put the
few necessary lines in devfs where they belong. This eliminates the
second-last source of bogo vnodes, leaving only the lemming-syncer.
Remove rootdev variable, it doesn't give meaning in a global context and
was not trustworth anyway. Correct information is provided by
statfs(/).
upcalls which do RPC header parsing and match up the reply with the
request. NFS calls now sleep on the nfsreq structure. This enables
us to eliminate the NFS recvlock.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
- Change the cached mtime to a 'struct timespec' from a
time_t. Improving the precision of the cached mtime tightens up
NFS' "close-to-open" consistency considerably.
- Always force an over-the-wire consistency check from nfs_open()
(unless the file is marked modified). This further improves
NFS' "close-to-open" consistency.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
vnode EXCLUSIVE lock. This prevents threads from adding pages to
the vnode while an invalidation is in progress, closing potential
races. In the bioread() path, callers acquire the SHARED vnode lock
- so while an invalidate was in progress, it was possible to fault
in new pages onto the vnode causing the invalidation to take a while
or fail. We saw these races at Yahoo! with very large files+heavy
concurrent access. Forcing an upgrade to EXCLUSIVE lock before doing
the invalidation closes all these races.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
socket callbacks or similar callers, from both the NFS client and the
server.
Instituted nfsm_dissect_nonblock(), nfsm_dissect_xx_nonblock(). And
nfsm_disct() now takes an extra M_TRYWAIT/M_DONTWAIT argument.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
is safe to turn off the nfsnode's NMODIFIED flag.
- Move the check for signals to the top of the loop where we loop
around the dirty buffers on the vnode, scheduling writes. This
ensures that we'll break ouf of the flush operation on reception of
a signal.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
userland and a dedicated system call to get replies.
The vnode-bypass of fifos broke this into a panic.
Ditch all the magic and create a device /dev/nfslock instead, and
use that for both directions apart from the shorter path, this is
also faster because the device driver runs Giant free using the
vnode bypass.
Noticed by: marcel
and annotate that nfs_mountroot assumes it is OK to step on the
values in the global NFSv3 diskless structure as the mountroot
function is called during a serialized part of the boot, before
any other NFS client activity occurs.
MFC after: 2 weeks
doesn't. Most of the implementations have grown weeds for this so they
copy some fields from mnt_stat if the passed argument isn't that.
Fix this the cleaner way: Always call the implementation on mnt_stat
and copy that in toto to the VFS_STATFS argument if different.
commit. In the new world order, the transitive closure on the vector
operations is not precomputed. As such, it's unsafe to actually use
any of the function pointers in an indirect function call. They can
be null, and we need to use the default vector in that case.
This is mostly a quick fix for the four function pointers that are
ed explicitly. A more generic or scalable solution is likely to see
the light of day.
No pathos on: current@
initializations but we did have lofty goals and big ideals.
Adjust to more contemporary circumstances and gain type checking.
Replace the entire vop_t frobbing thing with properly typed
structures. The only casualty is that we can not add a new
VOP_ method with a loadable module. History has not given
us reason to belive this would ever be feasible in the the
first place.
Eliminate in toto VOCALL(), vop_t, VNODEOP_SET() etc.
Give coda correct prototypes and function definitions for
all vop_()s.
Generate a bit more data from the vnode_if.src file: a
struct vop_vector and protype typedefs for all vop methods.
Add a new vop_bypass() and make vop_default be a pointer
to another struct vop_vector.
Remove a lot of vfs_init since vop_vector is ready to use
from the compiler.
Cast various vop_mumble() to void * with uppercase name,
for instance VOP_PANIC, VOP_NULL etc.
Implement VCALL() by making vdesc_offset the offsetof() the
relevant function pointer in vop_vector. This is disgusting
but since the code is generated by a script comparatively
safe. The alternative for nullfs etc. would be much worse.
Fix up all vnode method vectors to remove casts so they
become typesafe. (The bulk of this is generated by scripts)
a deadlock (with NFS exclusive vnode locks enabled). Lookup
grabs the parent's lock and wants to lock child. Readdirplus
locks the child and wants to lock parent (for loading the attrs
for ".."). The fix is to not load the attrs for ".." in
readdirplus.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
Reviewed by: rwatson
This closes a major hole in close-to-open consistency support.
Added a new sysctl so that this can be disabled for single NFS
client applications with very large amounts of mmap'ed IO (for
performance).
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
Reviewed by: rwatson
returned back to df from a statfs call. Causing df to print negative
values.
Submitted by: Mohan Srinivasan mohans at yahoo-inc dot com
Reviewed by: rwatson
setting the B_REMFREE flag in the buf. This is done to prevent lock order
reversals with code that must call bremfree() with a local lock held.
This also reduces overhead by removing two lock operations per buf for
fsync() and similar.
- Check for the B_REMFREE flag in brelse() and bqrelse() after the bqlock
has been acquired so that we may remove ourself from the free-list.
- Provide a bremfreef() function to immediately remove a buf from a
free-list for use only by NFS. This is done because the nfsclient code
overloads the b_freelist queue for its own async. io queue.
- Simplify the numfreebuffers accounting by removing a switch statement
that executed the same code in every possible case.
- getnewbuf() can encounter locked bufs on free-lists once Giant is removed.
Remove a panic associated with this condition and delay asserts that
inspect the buf until after it is locked.
Reviewed by: phk
Sponsored by: Isilon Systems, Inc.
Extend it with a strategy method.
Add bufstrategy() which do the usual VOP_SPECSTRATEGY/VOP_STRATEGY
song and dance.
Rename ibwrite to bufwrite().
Move the two NFS buf_ops to more sensible places, add bufstrategy
to them.
Add inlines for bwrite() and bstrategy() which calls through
buf->b_bufobj->b_ops->b_{write,strategy}().
Replace almost all VOP_STRATEGY()/VOP_SPECSTRATEGY() calls with bstrategy().
Initialize b_bufobj for all buffers.
Make incore() and gbincore() take a bufobj instead of a vnode.
Make inmem() local to vfs_bio.c
Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj)
also VI_MTX() to BO_MTX(),
Make buf_vlist_add() take a bufobj instead of a vnode.
Eliminate other uses of bp->b_vp where bp->b_bufobj will do.
Various minor polishing: remove "register", turn panic into KASSERT,
use new function declarations, TAILQ_FOREACH_SAFE() etc.
Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write
count on a bufobj. Bufobj_wdrop() replaces vwakeup().
Use these functions all relevant places except in ffs_softdep.c where
the use if interlocked_sleep() makes this impossible.
Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
on anything but DEVFS and in this case it was not even used (see below).
Put the NFS4 vop method for fifo's behind "#if 0" because it is unused.
Add a XXX comment to say that I think the unusedness is a bug.
send routine. In IPv6 UDP, the thread will be passed to suser(), which
asserts that if a thread is used for a super user check, it be
curthread. Many of these protocol entry points probably need to
accept credentials instead of threads.
MT5 candidate.
Noticed/tested by: kuriyama
and refuse initializing filesystems with a wrong version. This will
aid maintenance activites on the 5-stable branch.
s/vfs_mount/vfs_omount/
s/vfs_nmount/vfs_mount/
Name our filesystems mount function consistently.
Eliminate the namiedata argument to both vfs_mount and vfs_omount.
It was originally there to save stack space. A few places abused
it to get hold of some credentials to pass around. Effectively
it is unused.
Reorganize the root filesystem selection code.
Add local rootvp variables as needed.
Remove checks for miniroot's in the swappartition. We never did that
and most of the filesystems could never be used for that, but it had
still been copy&pasted all over the place.
a better name. I have a kern_[sg]etsockopt which I plan to commit
shortly, but the arguments to these function will be quite different
from so_setsockopt.
Approved by: alfred
This is to allow filesystems to decide based on the passed thread
which vnode to return.
Several filesystems used curthread, they now use the passed thread.
bootp -> BOOTP
bootp.nfsroot -> BOOTP_NFSROOT
bootp.nfsv3 -> BOOTP_NFSV3
bootp.compat -> BOOTP_COMPAT
bootp.wired_to -> BOOTP_WIRED_TO
- i.e. back out the previous commit. It's already possible to
pxeboot(8) with a GENERIC kernel.
Pointed out by: dwmalone
BOOTP -> bootp
BOOTP_NFSROOT -> bootp.nfsroot
BOOTP_NFSV3 -> bootp.nfsv3
BOOTP_COMPAT -> bootp.compat
BOOTP_WIRED_TO -> bootp.wired_to
This lets you PXE boot with a GENERIC kernel by putting this sort of thing
in loader.conf:
bootp="YES"
bootp.nfsroot="YES"
bootp.nfsv3="YES"
bootp.wired_to="bge1"
or even setting the variables manually from the OK prompt.
Rebind the client socket when we experience a timeout. This fixes
the case where our IP changes for some reason.
Signal a VFS event when NFS transitions from up to down and vice
versa.
Add a placeholder vfs_sysctl where we will put status reporting
shortly.
Also:
Make down NFS mounts return EIO instead of EINTR when there is a
soft timeout or force unmount in progress.
our cached 'next vnode' being removed from this mountpoint. If we
find that it was recycled, we restart our traversal from the start
of the list.
Code to do that is in all local disk filesystems (and a few other
places) and looks roughly like this:
MNT_ILOCK(mp);
loop:
for (vp = TAILQ_FIRST(&mp...);
(vp = nvp) != NULL;
nvp = TAILQ_NEXT(vp,...)) {
if (vp->v_mount != mp)
goto loop;
MNT_IUNLOCK(mp);
...
MNT_ILOCK(mp);
}
MNT_IUNLOCK(mp);
The code which takes vnodes off a mountpoint looks like this:
MNT_ILOCK(vp->v_mount);
...
TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes);
...
MNT_IUNLOCK(vp->v_mount);
...
vp->v_mount = something;
(Take a moment and try to spot the locking error before you read on.)
On a SMP system, one CPU could have removed nvp from our mountlist
but not yet gotten to assign a new value to vp->v_mount while another
CPU simultaneously get to the top of the traversal loop where it
finds that (vp->v_mount != mp) is not true despite the fact that
the vnode has indeed been removed from our mountpoint.
Fix:
Introduce the macro MNT_VNODE_FOREACH() to traverse the list of
vnodes on a mountpoint while taking into account that vnodes may
be removed from the list as we go. This saves approx 65 lines of
duplicated code.
Split the insmntque() which potentially moves a vnode from one mount
point to another into delmntque() and insmntque() which does just
what the names say.
Fix delmntque() to set vp->v_mount to NULL while holding the
mountpoint lock.
The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()
Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
allocation and deallocation. This flag's principal use is shortly after
allocation. For such cases, clearing the flag is pointless. The only
unusual use of PG_ZERO is in vfs_bio_clrbuf(). However, allocbuf() never
requests a prezeroed page. So, vfs_bio_clrbuf() never sees a prezeroed
page.
Reviewed by: tegge@
This avoids presenting invalid data to the client's applications
when the file is modified, and then extended within the window of
the resolution of the modifcation timestamp.
Reviewed By: iedowse
PR: kern/64091
This includes a modified form of some code from Thomas Moestl (tmm@)
to properly clean up the UMA zone and the "nfsnodehashtbl" hash
table.
Reviewed By: iedowse
PR: 16299
NFSv3. It's likely that modifying the attributes will affect the
file's accessibility. This version of the patch is one suggested
by Ian Dowse after reviewing my original attempt in the PR
Reviewed By: iedowse
PR: kern/44336
MFC after: 3 days
are supposed to continue firing as long as there is work to do, not
stop after the first invocation.
This is damage control after a patch that has been committed prematurely.
Tested by: kris
clock precision on i386. This is a NOP change on i386. But this stops
the mount_nfs units from suddenly changing to units of 1/20 of a second
(vs the normal 1/10 of a second) if HZ is increased.
path to an absolute path without a host name. Previously, there was a
nasty POLA violation where a system would PXE boot until you added the
BOOTP option and then it would panic instead.
Reviewed by: tegge, Dirk-Willem van Gulik <dirkx at webweaving.org>
(a previous version)
Submitted by: tegge (getip function)
functions in kern_socket.c.
Rename the "canwait" field to "mflags" and pass M_WAITOK and M_NOWAIT
in from the caller context rather than "1" or "0".
Correct mflags pass into mac_init_socket() from previous commit to not
include M_ZERO.
Submitted by: sam
remove unused pid field of file context struct
map nfs4 error codes to errnos
eliminate redundant code from nfs4_request
use zero stateid on setattr that doesn't set file size
use same clientid on all mounts until reboot
invalidate dirty bufs in nfs4_close, to play it safe
open file for writing if truncating and it's not already open
Approved by: alfred
- struct plimit includes a mutex to protect a reference count. The plimit
structure is treated similarly to struct ucred in that is is always copy
on write, so having a reference to a structure is sufficient to read from
it without needing a further lock.
- The proc lock protects the p_limit pointer and must be held while reading
limits from a process to keep the limit structure from changing out from
under you while reading from it.
- Various global limits that are ints are not protected by a lock since
int writes are atomic on all the archs we support and thus a lock
wouldn't buy us anything.
- All accesses to individual resource limits from a process are abstracted
behind a simple lim_rlimit(), lim_max(), and lim_cur() API that return
either an rlimit, or the current or max individual limit of the specified
resource from a process.
- dosetrlimit() was renamed to kern_setrlimit() to match existing style of
other similar syscall helper functions.
- The alpha OSF/1 compat layer no longer calls getrlimit() and setrlimit()
(it didn't used the stackgap when it should have) but uses lim_rlimit()
and kern_setrlimit() instead.
- The svr4 compat no longer uses the stackgap for resource limits calls,
but uses lim_rlimit() and kern_setrlimit() instead.
- The ibcs2 compat no longer uses the stackgap for resource limits. It
also no longer uses the stackgap for accessing sysctl's for the
ibcs2_sysconf() syscall but uses kernel_sysctl() instead. As a result,
ibcs2_sysconf() no longer needs Giant.
- The p_rlimit macro no longer exists.
Submitted by: mtm (mostly, I only did a few cleanups and catchups)
Tested on: i386
Compiled on: alpha, amd64
and the nfs3 client. Also fix some bugs that happen to be causing crashes
in both v3 and v4 introduced by the v4 import.
Submitted by: Jim Rees <rees@umich.edu>
Approved by: re
vfs_mount_alloc/vfs_mount_destroy functions and take care to completely
destroy the mount point along with its locks. Mount struct has grown in
coplexity recently and depending on each failure path to destroy it
completely isn't working anymore.
2. Eliminate largely identical vfs_mount and vfs_unmount question by
moving the code to handle both cases into a newly introduced vfs_domount
function.
3. Simplify nfs_mount_diskless to always expect an allocated mount
struct and never attempt an allocation/destruction itself. The
vfs_allocroot allocation was there to support 'magic' swap space
configuration for diskless clients that was already removed by PHK some
time ago.
4. Include a vfs_buildopts cleanups by Peter Edwards to validate the
sanity of nmount parameters passed from userland.
Submitted by: (4) Peter Edwards <peter.edwards@openet-telecom.com>
Reviewed by: rwatson
The reason this was done was to avoid a race to the root when an
NFS server went down. However a semi-recent change to the way that
the kernel's lookup() routine traverses mount points prevents this.
Rev 1.39 of vfs_lookup.c changed the ordering of locks such that we
aquire a shared lock on the mount point being accessed and then drop
the directory vnode lock before requesting the target lock.
With that in place we no longer need shared locks for NFS to prevent
race to the root lockups.
Introduce two new macros MNT_ILOCK(mp)/MNT_IUNLOCK(mp) to
operate on this mutex transparently.
Eventually new mutex will be protecting more fields in
struct mount, not only vnode list.
Discussed with: jeff
wasn't curthread, i.e. when we receive a thread pointer to use
as a function argument. Use VOP_UNLOCK/vrele in these cases.
The only case there td != curthread known at the moment is
boot() calling sync with thread0 pointer.
This fixes the panic on shutdown people have reported.
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.
This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.
Approved By: re (in principle)
Reviewed By: njl, imp
Tested On: i386, amd64, sparc64
Obtained From: NetBSD (if_xname)
VOP_INACTIVE routines need not worry about their vnode getting
recycled if they block. Remove the code from nfs_inactive() that
used vget() to get an extra vnode reference that was held during
the nfs_vinvalbuf() call.