Add per-Session configurable ping (SCSI NOP) and login timeouts.
Remove the torn down, old iSCSI session quickly, when performing a reconnect.
Reviewed By: trasz
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D34198
Require the newly opened file descriptor to be good, instead of
re-requiring the one that was required three lines earlier.
Thankfully, opening /dev/null is really unlikely to fail.
Reported by: Coverity
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Summary:
Use initial-exec, like other architectures.
While here, switch MACHINE_ARCH in lib/libc/Makefile to LIBC_ARCH and consistently use powerpc.
Subscribers: imp, #contributor_reviews_base
Differential Revision: https://reviews.freebsd.org/D34315
Reviewed by: luporl
MFC after: 2 weeks
This is useful for processors where we don't have an event table; in
those cases we default to a Cortex A8 (armv7) or Cortex A53 (arm64) in
order to attempt to provide something useful, but you're then limited to
the counters in those tables, some of which may also not be implemented
(e.g. LD/ST_RETIRED are no longer implemented in more recent cores,
replaced by LD/ST_SPEC).
Adding the raw EVENT_xxH event lists to each table ensures that you can
always request the exact events you want, regardless of what has been
detected or is known.
Reviewed by: mhorne
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D33805
When a thread exits, _Unwind_ForcedUnwind() is used to walk up stack
frames executing pending cleanups pushed by pthread_cleanup_push().
The cleanups are popped by thread_unwind_stop() which is passed as a
callback function to _Unwind_ForcedUnwind().
LLVM's libunwind uses a different function type for the callback on
32-bit ARM relative to all other platforms. The previous unwind.h
header (as well as the unwind.h from libcxxrt) use the non-ARM type on
all platforms, so this has likely been broken on 32-bit arm since it
switched to using LLVM's libunwind.
For now, just disable stack unwinding on 32-bit arm to unbreak the
build until a proper fix is tested.
Install headers from LLVM's libunwind in place of the headers from
libcxxrt and allow C applications to use the library.
As part of this, remove include/unwind.h and switch libthr over to
using the installed unwind.h.
Reviewed by: dim, emaste
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D34065
Libarchive 3.6.0
New features:
PR #1614: tar: new option "--no-read-sparse"
PR #1503: RAR reader: filter support
PR #1585: RAR5 reader: self-extracting archive support
New features (not used in FreeBSD base):
PR #1567: tar: threads support for zstd (#1567)
PR #1518: ZIP reader: zstd decompression support
Security Fixes:
PR #1491, #1492, #1493, CVE-2021-36976:
fix invalid memory access and out of bounds read in RAR5 reader
PR #1566, #1618, CVE-2021-31566:
extended fix for following symlinks when processing the fixup list
Other notable bugfixes and improvements:
PR #1620: tar: respect "--ignore-zeros" in c, r and u modes
PR #1625: reduced size of application binaries
MFC after: 2 weeks
Relnotes: yes
The optimization of sysctlbyname() in commit d05b53e0ba had the
side-effect of not going through the fix-up for the user.* variables
in the previously called sysctl() function.
This lead to 0 or an empty strings being returned by sysctlbyname()
for all user.* variables.
An alternate implementation would store the user variables in the
kernel during system start-up. That would allow to remove the fix-up
code in the C library that is currently required to provide the actual
values.
This update restores the previous code path for the user.* variables
and keeps the performance optimization intact for all other variables.
Approved by: mjg
Reviewed by: kaktus
Differential Revision: https://reviews.freebsd.org/D34171
Parts of zstd, used in openzfs and other places, trigger a new clang 14
-Werror warning:
```
sys/contrib/zstd/lib/decompress/huf_decompress.c:889:25: error: use of bitwise '&' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
(BIT_reloadDStreamFast(&bitD1) == BIT_DStream_unfinished)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
While the warning is benign, it should ideally be fixed upstream and
then vendor-imported, but for now silence it selectively.
MFC after: 3 days
- Add a starting index to 'struct vmstats' and change the
VM_STATS ioctl to fetch the 64 stats starting at that index.
A compat shim for <= 13 continues to fetch only the first 64
stats.
- Extend vm_get_stats() in libvmmapi to use a loop and a static
thread local buffer which grows to hold the stats needed.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D27463
Testing had revealed that trying to retrieve the user.localbase
variable into to small a buffer would return the correct error code,
but would not fill the available buffer space with a partial result.
A partial result is of no use, but this is still a violation of the
documented behavior, which has been fixed in the previous commit to
this function.
I just checked the code for "user.cs_path" and found that it had the
same issue.
Instead of fixing the logic for each user.* sysctl string variable
individually, this commit adds a helper function set_user_str() that
implements the semantics specified in the sysctl() man page.
It is currently only used for "user.cs_path" and "user.localbase",
but it will offer a significant simplification when further such
variables will be added (as I intend to do).
MFC after: 3 days
Testing of a new feature revealed that calling sysctl() to retrieve
the value of the user.localbase variable passing too low a buffer size
could leave the result buffer unchanged.
The behavior in the normal case of a sufficiently large buffer was
correct.
All known callers pass a sufficiently large buffer and have thus not
been affected by this issue. If a non-default value had been assigned
to this variable, the result was as documented, too.
Fix the function to fill the buffer with a partial result, if the
passed in buffer size is too low to hold the full result.
MFC after: 3 days
735748f30a changed the output of the states so that the creator id
endianness would be consistent. This means that we need to convert the
host endianness creatorid back to big-endian before we give it to the
kernel.
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
This matches the type in other unwind headers (LLVM libunwind,
libcxxrt, glibc).
NB: include/unwind.h is not installed but is only used by libthr
Reviewed by: imp, dim, emaste
Differential Revision: https://reviews.freebsd.org/D34049
This test was written because execvp was found to improperly handle the
argc == 0 case when it falls back from an ENOEXEC. We could probably
mostly revert it now, but let's just fix the test for the time being and
circle back later to decide if we want to simplify execvp. The test
will likely remain either way just to make sure execvp isn't working
around the newly enforced restriction with the fallback.
Fixes: 301cb491ea ("execvp: fix up the ENOEXEC fallback")
Reported by: jenkins via lwhsu@
This adds the PT_GETREGSET and PT_SETREGSET ptrace types. These can be
used to access all the registers from a specified core dump note type.
The NT_PRSTATUS and NT_FPREGSET notes are initially supported. Other
machine-dependant types are expected to be added in the future.
The ptrace addr points to a struct iovec pointing at memory to hold the
registers along with its length. On success the length in the iovec is
updated to tell userspace the actual length the kernel wrote or, if the
base address is NULL, the length the kernel would have written.
Because the data field is an int the arguments are backwards when
compared to the Linux PTRACE_GETREGSET call.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19831
We provide the hostid (which is the state creatorid) to the kernel as a
big endian number (see pfctl/pfctl.c pfctl_set_hostid()), so convert it
back to system endianness when we get it from the kernel.
This avoids a confusing mismatch between the value the user configures
and the value displayed in the state.
MFC after: 3 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D33989
The manpage has contained the following verbiage on the matter for just
under 31 years:
"At least one argument must be present in the array"
Previous to this version, it had been prefaced with the weakening phrase
"By convention."
Carry through and document it the rest of the way. Allowing argc == 0
has been a source of security issues in the past, and it's hard to
imagine a valid use-case for allowing it. Toss back EINVAL if we ended
up not copying in any args for *execve().
The manpage change can be considered "Obtained from: OpenBSD"
Reviewed by: emaste, kib, markj (all previous version)
Differential Revision: https://reviews.freebsd.org/D34045
As documented in the HiFive Unmatched Software Reference Manual.
Reviewed by: imp, mhorne
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D34010
While LLDB on powerpc and powerpcspe builds as-is, on powerpc64 and
powerpc64le it requires adding a couple of additional source files
to build.
Differential review: https://reviews.freebsd.org/D34043
Approved by: dim, imp, emaste
The CAM subsystem uses bus:taget:lun tuple to address peripherals. But
for convenience many userland programs such as camcontrol accept devices
names such as da0. There is a libcam function, cam_open_device, to
support that. It first calls cam_get_device() to parse the device name
as a driver name and a unit (and handle some special device name
prefixes) and then uses cam_lookup_pass() to find a matching pass
device.
This change extends cam_get_device() to apply realpath(3) to the device
name before parsing it. This will allow to use tools such as camcontrol
and smartctl with symbolic links that could be friendlier (more
distinguished) names for devices.
MFC after: 3 weeks
Relnotes: maybe
This matches libc and rtld in using the alignment (TLS_TCB_ALIGN) from
machine/tls.h instead of hardcoding 16.
Reviewed by: kib
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D34023
otherwise the data is just dropped. Check for current position equal to
the buffer base at the entry of the function; if not equal, setvbuf()
was done from the write method and it is not our business to override
the decision.
PR: 76398
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D34007
Reviewed by: kib, markj
Obtained from: CheriBSD
Sponsored by: The University of Cambridge, Google Inc.
Differential Revision: https://reviews.freebsd.org/D33988
Notable upstream pull request merges:
#12766 Fix error propagation from lzc_send_redacted
#12805 Updated the lz4 decompressor
#12851 FreeBSD: Provide correct file generation number
#12857 Verify dRAID empty sectors
#12874 FreeBSD: Update argument types for VOP_READDIR
#12896 Reduce number of arc_prune threads
#12934 FreeBSD: Fix zvol_*_open() locking
#12947 lz4: Cherrypick fix for CVE-2021-3520
#12961 FreeBSD: Fix leaked strings in libspl mnttab
#12964 Fix handling of errors from dmu_write_uio_dbuf() on FreeBSD
#12981 Introduce a flag to skip comparing the local mac when raw sending
#12985 Avoid memory allocations in the ARC eviction thread
Obtained from: OpenZFS
OpenZFS commit: 17b2ae0b24
The text after .error et al is emitted verbatim.
Reviewed by: sjg
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D33904
