- In g_disk_start(), verify that the data to be written is initialized
according to KMSAN shadow state.
- In g_disk_done(), verify that the block driver updated shadow state as
expected, so as to catch sources of false positives early.
Sponsored by: The FreeBSD Foundation
When an active g_vfs is orphaned due to an underlying disk going away
the destroy is deferred until the filesystem is unmounted in
g_vfs_done(). However, g_vfs_done() is invoked from a non-sleepable
context and cannot use M_WAITOK to allocate the event. Instead,
allocate the event in g_vfs_orphan() and save it in the softc to be
retrieved by the last call to g_vfs_done().
Reported by: Jithesh Arakkan @ Chelsio
Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D31354
Preallocate a geom_event (using the new geom_alloc_event) when we create
a disk. When we create the disk, we're going to be in a sleepable
context, so we can always allocate this extra bit of memory. Then use
this preallocated memory to free the disk. CAM can try to free the disk
from an unsleepable context if there was I/O outstanding when the disk
was destroyted (say because the SIM said it had gone away). The I/O
context isn't sleepable. Rather than trying to invent a retry mechanism
and making sure all the other geom_disk consumers did it properly,
preallocating the event ensure that the geom_disk will be properly torn
down, even when there's memory pressure when the disk departs.
Reviewd by: jhb
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30544
g_alloc_event will allocate storage for an opaque event. g_post_event_ep
can use memory returned by g_alloc_event to send an event from a context
that might not be able to allocate the event. Occasionally, we can
alloate memory when we create an object, but not while we're destroy
it. This allows one to allocate at creation time memory to use when
destorying the object.
Reviewed by: jhb
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30544
This partially reverts commit af433832f7520840c22edd1fe1266c1a5cb781ad.
Since such bogus disklabels still exist in the wild, we now probe for a
disklabel to decide whether to ignore the UFS partition or not; if there
is a label then we use the old behaviour, and if there isn't one then we
use the new behaviour.
Reviewed by: cy, mckusick
Differential Revision: https://reviews.freebsd.org/D31068
When authentication is configured, GELI ensures that the amount of data
per sector is a multiple of 16 bytes. This is done in
eli_metadata_softc(). When the digest size is not a multiple of 16
bytes, this leaves some extra pad bytes at the end of every sector, and
they were not being zeroed before being written to disk. In particular,
this happens with the HMAC/SHA1, HMAC/RIPEMD160 and HMAC/SHA384 data
authentication algorithms.
This change ensures that they are zeroed before being written to disk.
Reported by: KMSAN
Reviewed by: delphij, asomers
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D31170
Ensure that string buffers and pad bytes are zero-filled before writing
graid3 metadata.
Reported by: KMSAN
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Ensure that string buffers and pad bytes are zero-filled before writing
gconcat metadata. Also make sure to zero the full block buffer before
encoding the metadata and writing.
Fix some style bugs in g_concat_write_metadata() while here.
Reported by: KMSAN
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
The mirror metadata fields contain string buffers and pad bytes, neither
were being zeroed before metadata was written to disk. Also, the
metadata structure is smaller than the sector size, and in one case
gmirror was failing to zero-fill the full buffer before writing.
Fix these problems by pre-zeroing the metadata structure and the sector
buffer.
Reported by: KMSAN
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
We removed sysinstall(8) back in 2011, so this workaround should be long
since unnecessary. This workaround can end up breaking cases that are
hit in the real world, such as dd'ing a small pre-built disk image to a
large partition that you intend to grow on first boot and uses a UFS
disk label for / in its /etc/fstab (as the only reliable thing a raw UFS
image can reference).
Reviewed by: imp, mckusick
Differential Revision: https://reviews.freebsd.org/D30825
Implement the "gconcat append" command which can be used
to append a disk to the end of an existing gconcat device
without unmounting.
If the gconcat device is using the "automatic" method, i.e.,
stores metadata on the devices, new metadata is written
to all existing components, as well as to the newly added one.
Pull Request: https://github.com/freebsd/freebsd-src/pull/472
Reviewed by: imp@
zfsd uses a device's physical path attribute to automatically replace a
missing ZFS disk when a blank disk is inserted into the same physical
slot. Currently gmultipath passes through its underlying providers'
physical path attribute. That may cause zfsd to replace a missing
gmultipath provider with a newly arrived, single-path disk. That would
be bad.
This commit fixes that problem by simply appending "/mp" to the
underlying providers' physical path, in a manner similar to what geli
already does.
Sponsored by: Axcient
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D29941
Currently, OpenCrypto consumers can request asynchronous dispatch by
setting a flag in the cryptop. (Currently only IPSec may do this.) I
think this is a bit confusing: we (conditionally) set cryptop flags to
request async dispatch, and then crypto_dispatch() immediately examines
those flags to see if the consumer wants async dispatch. The flag names
are also confusing since they don't specify what "async" applies to:
dispatch or completion.
Add a new KPI, crypto_dispatch_async(), rather than encoding the
requested dispatch type in each cryptop. crypto_dispatch_async() falls
back to crypto_dispatch() if the session's driver provides asynchronous
dispatch. Get rid of CRYPTOP_ASYNC() and CRYPTOP_ASYNC_KEEPORDER().
Similarly, add crypto_dispatch_batch() to request processing of a tailq
of cryptops, rather than encoding the scheduling policy using cryptop
flags. Convert GELI, the only user of this interface (disabled by
default) to use the new interface.
Add CRYPTO_SESS_SYNC(), which can be used by consumers to determine
whether crypto requests will be dispatched synchronously. This is just
a helper macro. Use it instead of looking at cap flags directly.
Fix style in crypto_done(). Also get rid of CRYPTO_RETW_EMPTY() and
just check the relevant queues directly. This could result in some
unnecessary wakeups but I think it's very uncommon to be using more than
one queue per worker in a given workload, so checking all three queues
is a waste of cycles.
Reviewed by: jhb
Sponsored by: Ampere Computing
Submitted by: Klara, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28194
This fixes a failed assertion in scenario where the provider
disappears, disk_gone() gets called, and at the exact same
time something else closes the device node triggering a retaste.
Reviewed By: mav
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27330
Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.
Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.
Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.
Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.
Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225
On 32-bit platforms, the computed size of the BIO_SPEEDUP requested by
softdep_request_cleanup() may be negative when assigned to bp->b_bcount,
which has type "long".
Clamp the size to LONG_MAX. Also convert the unused g_io_speedup() to
use an off_t for the magnitude of the shortage for consistency with
softdep_send_speedup().
Reviewed by: chs, kib
Reported by: pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27081
Nothing implements this in the tree. Remove the ioctl and the
conversion to the geom atttribute stuff.
This was introduced in r94287 in 2002 and was retired in r113390
2003. It appeared in FreeBSD 5.0, but no other releases. This is a
vestige that was missed at the time and overlooked until now. No
compat is provided for this reason. And there's no implementation of
it today. And it was never part of a release from a stable branch.
Reviewed by: phk@
Differential Revision: https://reviews.freebsd.org/D26967
Before this GEOM passed bio pointer to transaction start, but not end.
It was irrelevant until devstat(9) got DTrace hooks, that appeared to
provide bio pointer on I/O completion, but not on submission.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
- Remove "opt_geom.h", no kernel options are used.
- Remove <sys/sysctl.h>, no sysctl functionality is used here.
- Remove <sys/bio.h>, requirements for bio moved out in r112534.
- Remove <sys/lock.h> and <sys/mutex.h>, last used by DROP_GIANT() and
PICKUP_GIANT(), which were removed in r115624.
- Remove <sys/disk.h> and <sys/kernel.h>, not used.
Reviewed by: phk, kevans (mentor)
Approved by: phk, kevans (mentor)
Differential Revision: https://reviews.freebsd.org/D26805
The kernel globals for kenv are confined to 2 files that need them and
a few that likely shouldn't (but as written the code does). Move them
from sys/systm.h to sys/kenv.h. This removed a XXX from systm.h and
cleans it up a little bit...
This is followup to r365477.
If pre-formatted device has GPT and a partition covering
last available LBAs and the device is attached using
a bridge reducing amount of LBAs, then it could be not enough
forcing GEOM to use primary GPT. Also, we should make it possible
to recover GPT and this requires either deleting or resizing the partition.
This change enables "gpart delete" and "gpart resize" commands
on corrupted GPT with following "gpart recover".
It still does not allow modifying corrupted GPT without
preliminary setting sysctl kern.geom.part.check_integrity=0
For example:
# gpart show da0
=> 34 3906963389 da0 GPT (1.8T) [CORRUPT]
34 262144 1 ms-reserved (128M)
262178 2014 - free - (1.0M)
264192 3906764943 2 freebsd-swap (1.8T)
# gpart resize -i 2 -s 3900000000 da0
# gpart recover da0
Reported by: Alex Korchmar
MFC after: 3 days
When we bring in geli into the boot loader, we are single threaded so
we don't have to worry about locking. We have no mutexes, and don't need
to use them, so comment it out.
MFC After: 3 days
There are multiple USB/SATA bridges on the market that unconditionally
cut some LBAs off connected media. This could be a problem
for pre-partitioned drives so GEOM complains and does not create
devices in /dev for slices/partitions preventing access to existing data.
We have kern.geom.part.check_integrity that allows us to correct
partitioning if changed from default 1 to 0 but it works for MBR only.
If backup copy of GPT is unavailable due to decreases number of LBAs,
kernel still does not give access to partitions and prints to dmesg:
GEOM: md0: corrupt or invalid GPT detected.
GEOM: md0: GPT rejected -- may not be recoverable.
This change makes it work for GPT too, so it created partitions in /dev
and prints to dmesg this instead:
GEOM: md0: the secondary GPT table is corrupt or invalid.
GEOM: md0: using the primary only -- recovery suggested.
Then "gpart recover" re-created backup copy of GPT
and allows further manipulations with partitions.
This change is no-op for default configuration having
kern.geom.part.check_integrity=1
Reported by: Alex Korchmar
MFC after: 3 days.
devctl_notify_f isn't needed, so retire it. The flags argument is now
unused, so rather than keep it around, retire it. Convert all old
users of it to devctl_notify(). This path no longer sleeps, so is safe
to call from any context. Since it doesn't sleep, it doesn't need to
know if it is OK to sleep or not.
Reviewed by: markj@
Differential Revision: https://reviews.freebsd.org/D26140
Use unmapped I/O for geli. Unlike most geom providers, geli needs to
manipulate data on every read or write. Previously it would always map bios.
On my 16-core, dual socket server using geli atop md(4) devices, with 512B
sectors, this change increases geli IOPs by about 3x.
Note that geli still can't use unmapped I/O when data integrity verification
is enabled (but it could, with a little more work). And it can't use
unmapped I/O in combination with ZFS, because ZFS uses mapped bios.
Reviewed by: markj, kib, jhb, mjg, mat, bcr (manpages)
MFC after: 1 week
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25671
Introduce G_PART_ALIAS_SOLARIS_RESERVED, GPT_ENT_TYPE_SOLARIS_RESERVED et al.,
to make gpart show output more convenient on systems with illumos/openindiana
disks visible.
Submitted by: Juraj Lutter <otis AT sk.FreeBSD.org>
Reviewed by: bcr(manpages), delphij, myself
Differential Revision: https://reviews.freebsd.org/D26012
The caller from kernel is expected to provide an valid g_class
pointer, instead of traversing the global g_class list, just
use that pointer directly instead.
Reviewed by: mav
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25811
The two classes do not take any verbs and always gctl_error for
all requests, so don't bother to provide a ctlreq handler.
Reviewed by: mav
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25810
routines out.
While there, also simplify the creation of label paths a little bit
by requiring the / suffix for label directory prefixes (ld_dir renamed
to ld_dirprefix to indicate the change) and stop defining macros for
these when they are only used once.
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25597
geli does all of its crypto operations in a separate thread pool, so
g_eli_start, g_eli_read_done, and g_eli_write_done don't actually do very
much work. Enabling direct dispatch eliminates the g_up/g_down bottlenecks,
doubling IOPs on my system. This change does not affect the thread pool.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25587
Take advantage of Warner's nice new real GEOM aliasing system and use it for
aliased partition names that actually work.
Our canonical EBR partition name is the weird, not-default-on-x86-prior-to-
this-revision "da1p4+00001234." However, if compatibility mode (tunable
kern.geom.part.ebr.compat_aliases) is enabled (1, default), we continue to
provide the alias names like "da1p5" in addition to the weird canonical
names.
Naming partition providers was just one aspect of the COMPAT knob; in
addition it limited mutability, in part because it did not preserve existing
EBR header content aside from that of LBA 0. This change saves the EBR
header for LBA 0, as well as for every EBR partition encountered. That way,
when we write out the EBR partition table on modification, we can restore
any bootloader or other metadata in both LBA0 (the first data-containing EBR
may start after 0) as well as every logical EBR we read from the disk, and
only update the geometry metadata and linked list pointers that describe the
actual partitioning.
(This change does not add support for the 'bootcode' verb to EBR.)
PR: 232463
Reported by: Manish Jain <bourne.identity AT hotmail.com>
Discussed with: ae (no objection)
Relnotes: maybe
Differential Revision: https://reviews.freebsd.org/D24939
