Add a new macro to clear both the L3 and L2 route caches, to
hopefully prevent future instances where only the L3 cache was
cleared when both should have been.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13989
Reviewed by: karels
When the inpcb route cache is invalidated after a change to the
routing tables, we need to invalidate the LLE cache as well.
Previous to this change packets for the connection would continue
to use the old L2 information from the old L3 gateway, and the
packets for the connection would likely be blackholed.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13988
Reviewed by: karels
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
with acquired RIB lock.
This fixes a possible panic due to trying to acquire RIB rlock when it is
already exclusive locked.
PR: 215963, 215122
MFC after: 1 week
Sponsored by: Yandex LLC
messages before accessing message fields that may not be present,
removing dead/duplicate/misleading code along the way.
Document the message format for each routing socket message in
route.h.
Fix a bug in usr.bin/netstat introduced in r287351 that resulted in
pointer computation with essentially random 16-bit offsets and
dereferencing of the results.
Reviewed by: ae
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D10330
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
The "rtentry" zone does not use UMA_ZONE_ZINIT, so it is invalid to assume the
mutex's memory will be zero. Without MTX_NEW, garbage backing memory may
trigger the "re-initializing a mutex" assertion.
PR: 200991
Submitted by: Chang-Hsien Tsai <luke.tw AT gmail.com>
family as an argument as well.
This will be used to cleanup individual protocols during VNET teardown.
Obtained from: projects/vnet
Sponsored by: The FreeBSD Foundation
but removed due to other changes in the system. Restore the llentry pointer
to the "struct route", and use it to cache the L2 lookup (ARP or ND6) as
appropriate.
Submitted by: Mike Karels
Differential Revision: https://reviews.freebsd.org/D6262
- properly V_irtualise variable access unbreaking VIMAGE kernels.
- remove the volatile from the function return type to make architecture
using gcc happy [-Wreturn-type]
"type qualifiers ignored on function return type"
I am not entirely happy with this solution putting the u_int there
but it will do for now.
route caching for TCP, with some improvements. In particular, invalidate
the route cache if a new route is added, which might be a better match.
The cache is automatically invalidated if the old route is deleted.
Submitted by: Mike Karels
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D4306
There are number of radix consumers in kernel land (pf,ipfw,nfs,route)
with different requirements. In fact, first 3 don't have _any_ requirements
and first 2 does not use radix locking. On the other hand, routing
structure do have these requirements (rnh_gen, multipath, custom
to-be-added control plane functions, different locking).
Additionally, radix should not known anything about its consumers internals.
So, radix code now uses tiny 'struct radix_head' structure along with
internal 'struct radix_mask_head' instead of 'struct radix_node_head'.
Existing consumers still uses the same 'struct radix_node_head' with
slight modifications: they need to pass pointer to (embedded)
'struct radix_head' to all radix callbacks.
Routing code now uses new 'struct rib_head' with different locking macro:
RADIX_NODE_HEAD prefix was renamed to RIB_ (which stands for routing
information base).
New net/route_var.h header was added to hold routing subsystem internal
data. 'struct rib_head' was placed there. 'struct rtentry' will also
be moved there soon.
The only piece of information that is required is rt_flags subset.
In particular, if_loop() requires RTF_REJECT and RTF_BLACKHOLE flags
to check if this particular mbuf needs to be dropped (and what
error should be returned).
Note that if_loop() will always return EHOSTUNREACH for "reject" routes
regardless of RTF_HOST flag existence. This is due to upcoming routing
changes where RTF_HOST value won't be available as lookup result.
All other functions require RTF_GATEWAY flag to check if they need
to return EHOSTUNREACH instead of EHOSTDOWN error.
There are 11 places where non-zero 'struct route' is passed to if_output().
For most of the callers (forwarding, bpf, arp) does not care about exact
error value. In fact, the only place where this result is propagated
is ip_output(). (ip6_output() passes NULL route to nd6_output_ifp()).
Given that, add 3 new 'struct route' flags (RT_REJECT, RT_BLACKHOLE and
RT_IS_GW) and inline function (rt_update_ro_flags()) to copy necessary
rte flags to ro_flags. Call this function in ip_output() after looking up/
verifying rte.
Reviewed by: ae
Such handler should pass different set of variables, instead
of directly providing 2 locked route entries.
Given that it hasn't been really used since at least 2012, remove
current code.
Will re-add it after finishing most major routing-related changes.
Discussed with: np
entries data in unified format.
There are control plane functions that require information other than
just next-hop data (e.g. individual rtentry fields like flags or
prefix/mask). Given that the goal is to avoid rte reference/refcounting,
re-use rt_addrinfo structure to store most rte fields. If caller wants
to retrieve key/mask or gateway (which are sockaddrs and are allocated
separately), it needs to provide sufficient-sized sockaddrs structures
w/ ther pointers saved in passed rt_addrinfo.
Convert:
* lltable new records checks (in_lltable_rtcheck(),
nd6_is_new_addr_neighbor().
* rtsock pre-add/change route check.
* IPv6 NS ND-proxy check (RADIX_MPATH code was eliminated because
1) we don't support RTF_ANNOUNCE ND-proxy for networks and there should
not be multiple host routes for such hosts 2) if we have multiple
routes we should inspect them (which is not done). 3) the entire idea
of abusing KRT as storage for ND proxy seems odd. Userland programs
should be used for that purpose).
Add ro_mtu field to 'struct route' to be able to pass lookup MTU back to
the caller.
Currently, ip6_getpmtu() has 2 totally different use cases:
1) control plane (IPV6_PATHMTU req), where we just need to calculate MTU
and return it, w/o any reusability.
2) Actual ip6_output() data path where we (nearly) always use the provided
route lookup data. If this data is not 'valid' we need to perform another
lookup and save the result (which cannot be re-used by ip6_output()).
Given that, handle 1) by calling separate function doing rte lookup itself.
Resulting MTU is calculated by (newly-added) ip6_calcmtu() used by both
ip6_getpmtu_ctl() and ip6_getpmtu().
For 2) instead of storing ref'ed rte, store mtu (the only needed data
from the lookup result) inside newly-added ro_mtu field.
'struct route' was shrinked by 8(or 4 bytes) in r292978. Grow it again
by 4 bytes. New ro_mtu field will be used in other places like
ip/tcp_output (EMSGSIZE handling from output routines).
Reviewed by: ae
Add if_requestencap() interface method which is capable of calculating
various link headers for given interface. Right now there is support
for INET/INET6/ARP llheader calculation (IFENCAP_LL type request).
Other types are planned to support more complex calculation
(L2 multipath lagg nexthops, tunnel encap nexthops, etc..).
Reshape 'struct route' to be able to pass additional data (with is length)
to prepend to mbuf.
These two changes permits routing code to pass pre-calculated nexthop data
(like L2 header for route w/gateway) down to the stack eliminating the
need for other lookups. It also brings us closer to more complex scenarios
like transparently handling MPLS nexthops and tunnel interfaces.
Last, but not least, it removes layering violation introduced by flowtable
code (ro_lle) and simplifies handling of existing if_output consumers.
ARP/ND changes:
Make arp/ndp stack pre-calculate link header upon installing/updating lle
record. Interface link address change are handled by re-calculating
headers for all lles based on if_lladdr event. After these changes,
arpresolve()/nd6_resolve() returns full pre-calculated header for
supported interfaces thus simplifying if_output().
Move these lookups to separate ether_resolve_addr() function which ether
returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr()
compat versions to return link addresses instead of pre-calculated data.
BPF changes:
Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT.
Despite the naming, both of there have ther header "complete". The only
difference is that interface source mac has to be filled by OS for
AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside
BPF and not pollute if_output() routines. Convert BPF to pass prepend data
via new 'struct route' mechanism. Note that it does not change
non-optimized if_output(): ro_prepend handling is purely optional.
Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI.
It is not needed for ethernet anymore. The only remaining FDDI user is
dev/pdq mostly untouched since 2007. FDDI support was eliminated from
OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65).
Flowtable changes:
Flowtable violates layering by saving (and not correctly managing)
rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated
header data from that lle.
Differential Revision: https://reviews.freebsd.org/D4102
Before the change, things like lle state were queried via
SIOCGNBRINFO_IN6 by ndp(8) for _each_ lle entry in dump.
This ioctl was added in 1999, probably to avoid touching rtsock code.
This change maps SIOCGNBRINFO_IN6 data to standard rtsock dump the
following way:
expire (already) maps to rtm_rmx.rmx_expire
isrouter -> rtm_flags & RTF_GATEWAY
asked -> rtm_rmx.rmx_pksent
state -> rtm_rmx.rmx_state (maps to rmx_weight via define)
Reviewed by: ae
Vast majority of rtalloc(9) users require only basic info from
route table (e.g. "does the rtentry interface match with the interface
I have?". "what is the MTU?", "Give me the IPv4 source address to use",
etc..).
Instead of hand-rolling lookups, checking if rtentry is up, valid,
dealing with IPv6 mtu, finding "address" ifp (almost never done right),
provide easy-to-use API hiding all the complexity and returning the
needed info into small on-stack structure.
This change also helps hiding route subsystem internals (locking, direct
rtentry accesses).
Additionaly, using this API improves lookup performance since rtentry is not
locked.
(This is safe, since all the rtentry changes happens under both radix WLOCK
and rtentry WLOCK).
Sponsored by: Yandex LLC
by filter function instead of picking into routing table details in
each consumer.
Remove now-unused rt_expunge() (eliminating last external RTF_RNH_LOCKED
user).
This simplifies future nexthops/mulitipath changes and rtrequest1_fib()
locking refactoring.
Actual changes:
Add "rt_chain" field to permit rte grouping while doing batched delete
from routing table (thus growing rte 200->208 on amd64).
Add "rti_filter" / "rti_filterdata" / "rti_spare" fields to rt_addrinfo
to pass filter function to various routing subsystems in standard way.
Convert all rt_expunge() customers to new rt_addinfo-based api and eliminate
rt_expunge().
Some places in our network stack already have const
arguments (like if_output() routines and LLE functions).
Code using ifa_ifwith (and similar functins) along with
LLE/_output functions is currently bound to use tricks
like __DECONST(). Provide a cleaner way by making sockaddr
lookup key really constant.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D3464
* Move interface route cleanup to route.c:rt_flushifroutes()
* Convert most of "for (fibnum = 0; fibnum < rt_numfibs; fibnum++)" users
to use new rt_foreach_fib() instead of hand-rolling cycles.
Update route MTU in case of ifnet MTU change.
Add new RTF_FIXEDMTU to track explicitly specified MTU.
Old behavior:
ifconfig em0 mtu 1500->9000 -> all routes traversing em0 do not change MTU.
User has to manually update all routes.
ifconfig em0 mtu 9000->1500 -> all routes traversing em0 do not change MTU.
However, if ip[6]_output finds route with rt_mtu > interface mtu, rt_mtu
gets updated.
New behavior:
ifconfig em0 mtu 1500->9000 -> all interface routes in all fibs gets updated
with new MTU unless RTF_FIXEDMTU flag set on them.
ifconfig em0 mtu 9000->1500 -> all routes in all fibs gets updated with new
MTU unless RTF_FIXEDMTU flag set on them AND rt_mtu is less than ifp mtu.
route add ... -mtu XXX automatically sets RTF_FIXEDMTU flag.
route change .. -mtu 0 automatically removes RTF_FIXEDMTU flag.
PR: 194238
MFC after: 1 month
CR: D1125
All rtsock-initiated rte creation/modification are now
performed in route.c holding radix tree write lock.
This reduces the need for per-rte mutex.
Sponsored by: Yandex LLC
MFC after: 1 month
after r262763 it started to return locked mutexes to UMA. To fix that,
conditionally unlock the mutex in the destructor.
Tested by: "Sergey V. Dyatko" <sergey.dyatko@gmail.com>
- Use counter(9) for rt_pksent (former rt_rmx.rmx_pksent). This
removes another cache trashing ++ from packet forwarding path.
- Create zini/fini methods for the rtentry UMA zone. Via initialize
mutex and counter in them.
- Fix reporting of rmx_pksent to routing socket.
- Fix netstat(1) to report "Use" both in kvm(3) and sysctl(3) mode.
The change is mostly targeted for stable/10 merge. For head,
rt_pksent is expected to just disappear.
Discussed with: melifaro
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
has the same prefix as some other alias on the same interface, use
newly-added rt_addrmsg() instead of hand-rolled in_addralias_rtmsg().
This eliminates the following rtsock messages:
Pinned RTM_ADD for prefix (for alias addition).
Pinned RTM_DELETE for prefix (for alias withdrawal).
Example (got 10.0.0.1/24 on vlan4, playing with 10.0.0.2/24):
before commit, addition:
got message of size 116 on Fri Jan 10 14:13:15 2014
RTM_NEWADDR: address being added to iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 10.0.0.2 10.0.0.255
got message of size 192 on Fri Jan 10 14:13:15 2014
RTM_ADD: Add Route: len 192, pid: 0, seq 0, errno 0, flags:<UP,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 10.0.0.2 (255) ffff ffff ff
after commit, addition:
got message of size 116 on Fri Jan 10 13:56:26 2014
RTM_NEWADDR: address being added to iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 14.0.0.2 14.0.0.255
before commit, wihdrawal:
got message of size 192 on Fri Jan 10 13:58:59 2014
RTM_DELETE: Delete Route: len 192, pid: 0, seq 0, errno 0, flags:<UP,PINNED>
locks: inits:
sockaddrs: <DST,GATEWAY,NETMASK>
10.0.0.0 10.0.0.2 (255) ffff ffff ff
got message of size 116 on Fri Jan 10 13:58:59 2014
RTM_DELADDR: address being removed from iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 10.0.0.2 10.0.0.255
adter commit, withdrawal:
got message of size 116 on Fri Jan 10 14:14:11 2014
RTM_DELADDR: address being removed from iface: len 116, metric 0, flags:
sockaddrs: <NETMASK,IFP,IFA,BRD>
255.255.255.0 vlan4:8.0.27.c5.29.d4 10.0.0.2 10.0.0.255
Sending both RTM_ADD/RTM_DELETE messages to rtsock is completely wrong
(and requires some hacks to keep prefix in route table on RTM_DELETE).
I've tested this change with quagga (no change) and bird (*).
bird alias handling is already broken in *BSD sysdep code, so nothing
changes here, too.
I'm going to MFC this change if there will be no complains about behavior
change.
While here, fix some style(9) bugs introduced by r260488
(pointed by glebius and bde).
Sponsored by: Yandex LLC
MFC after: 4 weeks
Adding/deleting interface addresses involves access to 3 different subsystems,
int different parts of code. Each call can fail, so reporting successful
operation by rtsock in the middle of the process error-prone.
Further split routing notification API and actual rtsock calls via creating
public-available rt_addrmsg() / rt_routemsg() functions with "private"
rtsock_* backend.
MFC after: 2 weeks
in FBSD 8.0, interface routes have been returened to the
applications without the RTF_GATEWAY bit. This incompatibility
has caused some issues with Zebra, Qugga and the like.
This patch provides the RTF_GATEWAY flag bit in returned interface
routes so to behave similarly to pre 8.0 systems.
Reviewed by: hrs
Verified by: mackn at opendns dot com
Use RTM_PINNED flag to mark route as immutable.
Forbid deleting immutable routes without special rtrequest1_fib() flag.
Adding interface address with prefix already in route table is handled
by atomically deleting old prefix and adding interface one.
Discussed with: andre, eri
MFC after: 3 weeks
it skips FLOWTABLE lookup. However, the non-NULL ro has dual meaning
here: it may be supplied to provide route, and it may be supplied to
store and return to caller the route that ip_output()/ip6_output()
finds. In the latter case skipping FLOWTABLE lookup is pessimisation.
The difference between struct route filled by FLOWTABLE and filled
by rtalloc() family is that the former doesn't hold a reference on
its rtentry. Reference is hold by flow entry, and it is about to
be released in future. Thus, route filled by FLOWTABLE shouldn't
be passed to RTFREE() macro.
- Introduce new flag for struct route/route_in6, that marks route
not holding a reference on rtentry.
- Introduce new macro RO_RTFREE() that cleans up a struct route
depending on its kind.
- All callers to ip_output()/ip6_output() that do supply non-NULL
but empty route should use RO_RTFREE() to free results of
lookup.
- ip_output()/ip6_output() now do FLOWTABLE lookup always when
ro->ro_rt == NULL.
Tested by: tuexen (SCTP part)
rather than the header file. With this also move RT_MAXFIBS and
RT_NUMFIBS into the implemantion to avoid further usage in other
code. rt_numfibs is all that should be needed.
This allows users to change the number of FIBs from 1..RT_MAXFIBS(16)
dynamically using the tunable without the need to change the kernel
config for the maximum anymore. This means that thet multi-FIB
feature is now fully available with GENERIC kernels.
The kernel option ROUTETABLES can still be used to set the default
numbers of FIBs in absence of the tunable.
Ok.ed by: julian, hrs, melifaro
MFC after: 2 weeks
the (maximum) number of FIBs trying to clarify that evetually FIBs
should probably attached to domain(9) specific storage. [1]
Add a comment on a limitimation on the rt_add_addr_allfibs option.
Use RT_DEFAULT_FIB instead of 0 where applicable.
Add empty line to functions without local variables per style.
Put public yet unused in-tree function rtinit_fib() under BURN_BRIDGES
to indicate that it might go away in the future.
No functional change.
Discussed with: julian [1] (clarification on what the original one meant)
Sponsored by: Cisco Systems, Inc.
