thread, after the bound thread leaves critical region, the thread should
check debug flag may suspend itself by using the command.
2.Schedule upcall after thread is suspended by debugger
3.Wakeup upcall thread after process suspension.
Reviewed by: deischen
specify "us" as the thread not the process/ksegrp/kse.
You can always find the others from the thread but the converse is not true.
Theorotically this would lead to runtime being allocated to the wrong
entity in some cases though it is not clear how often this actually happenned.
(would only affect threaded processes and would probably be pretty benign,
but it WAS a bug..)
Reviewed by: peter
since they are only accessed by curthread and thus do not need any
locking.
- Move pr_addr and pr_ticks out of struct uprof (which is per-process)
and directly into struct thread as td_profil_addr and td_profil_ticks
as these variables are really per-thread. (They are used to defer an
addupc_intr() that was too "hard" until ast()).
1. Add tm_lwpid into kse_thr_mailbox to indicate which kernel
thread current user thread is running on. Add tm_dflags into
kse_thr_mailbox, the flags is written by debugger, it tells
UTS and kernel what should be done when the process is being
debugged, current, there two flags TMDF_SSTEP and TMDF_DONOTRUNUSER.
TMDF_SSTEP is used to tell kernel to turn on single stepping,
or turn off if it is not set.
TMDF_DONOTRUNUSER is used to tell kernel to schedule upcall
whenever possible, to UTS, it means do not run the user thread
until debugger clears it, this behaviour is necessary because
gdb wants to resume only one thread when the thread's pc is
at a breakpoint, and thread needs to go forward, in order to
avoid other threads sneak pass the breakpoints, it needs to remove
breakpoint, only wants one thread to go. Also, add km_lwp to
kse_mailbox, the lwp id is copied to kse_thr_mailbox at context
switch time when process is not being debugged, so when process
is attached, debugger can map kernel thread to user thread.
2. Add p_xthread to proc strcuture and td_xsig to thread structure.
p_xthread is used by a thread when it wants to report event
to debugger, every thread can set the pointer, especially, when
it is used in ptracestop, it is the last thread reporting event
will win the race. Every thread has a td_xsig to exchange signal
with debugger, thread uses TDF_XSIG flag to indicate it is reporting
signal to debugger, if the flag is not cleared, thread will keep
retrying until it is cleared by debugger, p_xthread may be
used by debugger to indicate CURRENT thread. The p_xstat is still
in proc structure to keep wait() to work, in future, we may
just use td_xsig.
3. Add TDF_DBSUSPEND flag, the flag is used by debugger to suspend
a thread. When process stops, debugger can set the flag for
thread, thread will check the flag in thread_suspend_check,
enters a loop, unless it is cleared by debugger, process is
detached or process is existing. The flag is also checked in
ptracestop, so debugger can temporarily suspend a thread even
if the thread wants to exchange signal.
4. Current, in ptrace, we always resume all threads, but if a thread
has already a TDF_DBSUSPEND flag set by debugger, it won't run.
Encouraged by: marcel, julian, deischen
will be used heavily in debugging KSE threads. This breaks libpthread
on IA64, but because libpthread was not in 5.2.1 release, I would like
to change it so we needn't to introduce another syscall.
The overhead of unconditionally allocating TIDs (and likewise,
unconditionally deallocating them), is amortized across multiple
thread creations by the way UMA makes it possible to have type-stable
storage.
Previously the cost was kept down by having threads created as part
of a fork operation use the process' PID as the TID. While this had
some nice properties, it also introduced complexity in the way TIDs
were allocated. Most importantly, by using the type-stable storage
that UMA gives us this was also unnecessary.
This change affects how core dumps are created and in particular how
the PRSTATUS notes are dumped. Since we don't have a thread with a
TID equalling the PID, we now need a different way to preserve the
old and previous behavior. We do this by having the given thread (i.e.
the thread passed to the core dump code in td) dump it's state first
and fill in pr_pid with the actual PID. All other threads will have
pr_pid contain their TIDs. The upshot of all this is that the debugger
will now likely select the right LWP (=TID) as the initial thread.
Credits to: julian@ for spotting how we can utilize UMA.
Thanks to: all who provided julian@ with test results.
is generic to any threading system. This commit does not link this
file to the build yet, nor does it remove these functions from their
current location in kern_thread.c. (that commit coming up after further review)
of not clearing the flags for execv() syscall will result that a new
program runs in KSE thread mode without enabling it.
Submitted by: tjr
Modified by: davidxu
condition where kse_wakeup() doesn't yet see them in (interruptible)
sleep queues. Also add an upcall check to sleepqueue_catch_signals()
suggested by jhb.
This commit should fix recent mysql hangs.
Reviewed by: jhb, davidxu
Mysql'd by: Robin P. Blanchard <robin.blanchard at gactr uga edu>
is twofold:
1. When a 1:1 or M:N threaded process dumps core, we need to put the
register state of each of its kernel threads in the core file.
This can only be done by differentiating the pid field in the
respective note. For this we need the tid.
2. When thread support is present for remote debugging the kernel
with gdb(1), threads need to be identified by an integer due to
limitations in the remote protocol. This requires having a tid.
To minimize the impact of having thread IDs, threads that are created
as part of a fork (i.e. the initial thread in a process) will inherit
the process ID (i.e. tid=pid). Subsequent threads will have IDs larger
than PID_MAX to avoid interference with the pid allocation algorithm.
The assignment of tids is handled by thread_new_tid().
The thread ID allocation algorithm has been written with 3 assumptions
in mind:
1. IDs need to be created as fast a possible,
2. Reuse of IDs may happen instantaneously,
3. Someone else will write a better algorithm.
- no longer serialize on Giant for thread_single*() and family in fork,
exit and exec
- thread_wait() is mpsafe, assert no Giant
- reduce scope of Giant in exit to not cover thread_wait and just do
vm_waitproc().
- assert that thread_single() family are not called with Giant
- remove the DROP/PICKUP_GIANT macros from thread_single() family
- assert that thread_suspend_check() s not called with Giant
- remove manual drop_giant hack in thread_suspend_check since we know it
isn't held.
- remove the DROP/PICKUP_GIANT macros from thread_suspend_check() family
- mark kse_create() mpsafe
race in between sleepq_add() and sleepq_catch_signals() in that setting
td_wchan and TDF_SINTR is not atomic to sched_lock but only to the sleepq
lock. This band-aid will stop assertion failures, but there is perhaps a
larger problem with the sleepq_add/sleepq_catch_signals race that I am not
sure how to solve. For the signals case the race is harmless because we
always call cursig() after setting TDF_SINTR. However, KSE doesn't do
anything in sleepq_catch_signals() to check that this race was lost, so I
am unsure if this race is harmful for this specific abort.
sleep queue interface:
- Sleep queues attempt to merge some of the benefits of both sleep queues
and condition variables. Having sleep qeueus in a hash table avoids
having to allocate a queue head for each wait channel. Thus, struct cv
has shrunk down to just a single char * pointer now. However, the
hash table does not hold threads directly, but queue heads. This means
that once you have located a queue in the hash bucket, you no longer have
to walk the rest of the hash chain looking for threads. Instead, you have
a list of all the threads sleeping on that wait channel.
- Outside of the sleepq code and the sleep/cv code the kernel no longer
differentiates between cv's and sleep/wakeup. For example, calls to
abortsleep() and cv_abort() are replaced with a call to sleepq_abort().
Thus, the TDF_CVWAITQ flag is removed. Also, calls to unsleep() and
cv_waitq_remove() have been replaced with calls to sleepq_remove().
- The sched_sleep() function no longer accepts a priority argument as
sleep's no longer inherently bump the priority. Instead, this is soley
a propery of msleep() which explicitly calls sched_prio() before
blocking.
- The TDF_ONSLEEPQ flag has been dropped as it was never used. The
associated TDF_SET_ONSLEEPQ and TDF_CLR_ON_SLEEPQ macros have also been
dropped and replaced with a single explicit clearing of td_wchan.
TD_SET_ONSLEEPQ() would really have only made sense if it had taken
the wait channel and message as arguments anyway. Now that that only
happens in one place, a macro would be overkill.
SW_INVOL. Assert that one of these is set in mi_switch() and propery
adjust the rusage statistics. This is to simplify the large number of
users of this interface which were previously all required to adjust the
proper counter prior to calling mi_switch(). This also facilitates more
switch and locking optimizations.
- Change all callers of mi_switch() to pass the appropriate paramter and
remove direct references to the process statistics.
Presumably, at some point, you had to include jail.h if you included
proc.h, but that is no longer required.
Result of: self injury involving adding something to struct prison
to have the kernel switch to a new thread, instead of doing it in
userland. It is in fact needed on ia64 where syscall restarts do not
return to userland first. It's completely handled inside the kernel.
As such, any context created by the kernel as part of an upcall and
caused by some syscall needs to be restored by the kernel.
turnstiles to implement blocking isntead of implementing a thread queue
directly. These turnstiles are somewhat similar to those used in Solaris 7
as described in Solaris Internals but are also different.
Turnstiles do not come out of a fixed-sized pool. Rather, each thread is
assigned a turnstile when it is created that it frees when it is destroyed.
When a thread blocks on a lock, it donates its turnstile to that lock to
serve as queue of blocked threads. The queue associated with a given lock
is found by a lookup in a simple hash table. The turnstile itself is
protected by a lock associated with its entry in the hash table. This
means that sched_lock is no longer needed to contest on a mutex. Instead,
sched_lock is only used when manipulating run queues or thread priorities.
Turnstiles also implement priority propagation inherently.
Currently turnstiles only support mutexes. Eventually, however, turnstiles
may grow two queue's to support a non-sleepable reader/writer lock
implementation. For more details, see the comments in sys/turnstile.h and
kern/subr_turnstile.c.
The two primary advantages from the turnstile code include: 1) the size
of struct mutex shrinks by four pointers as it no longer stores the
thread queue linkages directly, and 2) less contention on sched_lock in
SMP systems including the ability for multiple CPUs to contend on different
locks simultaneously (not that this last detail is necessarily that much of
a big win). Note that 1) means that this commit is a kernel ABI breaker,
so don't mix old modules with a new kernel and vice versa.
Tested on: i386 SMP, sparc64 SMP, alpha SMP
cpu_switch() where both the old and new threads are passed in as
arguments. Only powerpc uses the old conventions now.
- Update comments in the Alpha swtch.s to reflect KSE changes.
Tested by: obrien, marcel
than i386 or AMD64, TP register points to thread mailbox, and they can not
atomically clear km_curthread in kse mailbox, in this case, thread retrieves
its thread pointer from TP register and sets flag TMF_NOUPCALL in its thread
mailbox to indicate a critical region.
be delivered to that thread, regardless of whether it
has it masked or not.
Previously, if the targeted thread had the signal masked,
it would be put on the processes' siglist. If
another thread has the signal umasked or unmasks it before
the target, then the thread it was intended for would never
receive it.
This patch attempts to solve the problem by requiring callers
of tdsignal() to say whether the signal is for the thread or
for the process. If it is for the process, then normal processing
occurs and any thread that has it unmasked can receive it.
But if it is destined for a specific thread, it is put on
that thread's pending list regardless of whether it is currently
masked or not.
The new behaviour still needs more work, though. If the signal
is reposted for some reason it is always posted back to the
thread that handled it because the information regarding the
target of the signal has been lost by then.
Reviewed by: jdp, jeff, bde (style)
happens to work on 32-bit platforms as sizeof(long)=sizeof(int), but
wrecks all kinds of havoc (garbage reads, corrupting writes and
misaligned loads/stores) on 64-bit architectures.
The fix for now is to use fuword32() and suword32() and change the
type of the applicable int fields to int32. This is to make it
explicit that we depend on these fields being 32-bit. We may want
to revisit this later.
Reviewed by: deischen
or unblock a thread in kernel, and allow UTS to specify whether syscall
should be restarted.
o Add ability for UTS to monitor signal comes in and removed from process,
the flag PS_SIGEVENT is used to indicate the events.
o Add a KMF_WAITSIGEVENT for KSE mailbox flag, UTS call kse_release with
this flag set to wait for above signal event.
o For SA based thread, kernel masks all signal in its signal mask, let
UTS to use kse_thr_interrupt interrupt a thread, and install a signal
frame in userland for the thread.
o Add a tm_syncsig in thread mailbox, when a hardware trap occurs,
it is used to deliver synchronous signal to userland, and upcall
is schedule, so UTS can process the synchronous signal for the thread.
Reviewed by: julian (mentor)
before calling it for bound thread. To avoid this problem, change
thread_schedule_upcall to not put new thread on run queue, let caller
do it, so we can tweak the new thread before setting it to run.
Reported by: pho
