default_pager_putpages() and swap_pager_putpages().
It is the same fix as was done for vnode_pager_putpages()
in r271586.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This code has had an extensive rewrite and a good series of reviews, both by the author and other parties. This means a lot of code has been simplified. Pluggable structures for high-rate entropy generators are available, and it is most definitely not the case that /dev/random can be driven by only a hardware souce any more. This has been designed out of the device. Hardware sources are stirred into the CSPRNG (Yarrow, Fortuna) like any other entropy source. Pluggable modules may be written by third parties for additional sources.
The harvesting structures and consequently the locking have been simplified. Entropy harvesting is done in a more general way (the documentation for this will follow). There is some GREAT entropy to be had in the UMA allocator, but it is disabled for now as messing with that is likely to annoy many people.
The venerable (but effective) Yarrow algorithm, which is no longer supported by its authors now has an alternative, Fortuna. For now, Yarrow is retained as the default algorithm, but this may be changed using a kernel option. It is intended to make Fortuna the default algorithm for 11.0. Interested parties are encouraged to read ISBN 978-0-470-47424-2 "Cryptography Engineering" By Ferguson, Schneier and Kohno for Fortuna's gory details. Heck, read it anyway.
Many thanks to Arthur Mesh who did early grunt work, and who got caught in the crossfire rather more than he deserved to.
My thanks also to folks who helped me thresh this out on whiteboards and in the odd "Hallway track", or otherwise.
My Nomex pants are on. Let the feedback commence!
Reviewed by: trasz,des(partial),imp(partial?),rwatson(partial?)
Approved by: so(des)
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Older binaries are still permitted to use these flags.
PR: 193961 (exp-run in ports)
Differential Revision: https://reviews.freebsd.org/D848
Reviewed by: kib
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
Submitted by: kmacy
Tested by: make universe
compatible with write-locked path. Test for MAP_ENTRY_NOSYNC and set
VPO_NOSYNC for pages with dirty mask zero (this does not exclude a
possibility that the page is dirty, e.g. due to read fault on
writeable mapping and consequent write; the same issue exists in the
slow path).
Use helper vm_fault_dirty() to unify fast and slow path handling of
VPO_NOSYNC and setting the dirty mask.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
Acquire the lock in read mode when just needed to ensure the stability
of the keg list. The UMA lock may be held for a long time (relatively
speaking) in uma_reclaim() on machines with lots of zones/kegs. If the
uma_timeout() would fire during that period, subsequent callouts on that
CPU may be significantly delayed.
Reviewed by: jhb
Callers of zone_drain_wait(M_WAITOK) do not need to hold (and were not)
the uma_mtx, but we would attempt to unlock and relock the mutex if we
had to sleep because the zone was already draining. The M_NOWAIT callers
may hold the uma_mtx, but we do not sleep in that case.
Reviewed by: jhb
MFC after: 3 days
interrupts and report the largest value seen as sysctl
debug.max_kstack_used. Useful to estimate how close the kernel stack
size is to overflow.
In collaboration with: Larry Baird <lab@gta.com>
Sponsored by: The FreeBSD Foundation (kib)
MFC after: 1 week
Remove previously added kmem methods in favour of defines which
allow diff minimisation between upstream code base.
Rebalance ARC free target to be vm_pageout_wakeup_thresh by default
which eliminates issue where ARC gets minimised instead of balancing
with VM pageout. The restores the target point prior to r270759.
Bring in missing upstream only changes which move unused code to
further eliminate code differences.
Add additional DTRACE probe to aid monitoring of ARC behaviour.
Enable upstream i386 code paths on platforms which don't define
UMA_MD_SMALL_ALLOC.
Fix mixture of byte an page values in arc_memory_throttle i386 code
path value assignment of available_memory.
PR: 187594
Review: D702
Reviewed by: avg
MFC after: 1 week
X-MFC-With: r270759 & r270861
Sponsored by: Multiplay
the wired attribute of the mapping. As result, some pmap
implementations clear the wired state of the page table entries, which
breaks invariants and allows the entries to be lost. Avoid calling
vm_map_pmap_enter() for the MADV_WILLNEED on the wired entry, the
pages must be already mapped.
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
MAP_PRIVATE flags to MAP_SHARED. Apparently, some code in tree, in
particular, libgeom, relied on this behaviour, see r271721. For
regular file types, the absence of the flags is interpreted as
MAP_PRIVATE, and libc nlist used this (fixed in r271723).
Allow the implicit flags for legacy binaries. Bump __FreeBSD_version
to get the ABI note on new binaries to check for in mmap code.
Remove the test for presence of one of the MAP_ANON, MAP_SHARED or
MAP_PRIVATE flags before fget_mmap(). For MAP_ANON, we already verify
that passed fd == -1. For fd != -1, test after fget_mmap() (for newer
binaries) covers the case.
Reported by: bdrewery, pho
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
- Fail with EINVAL if an invalid protection mask is passed to mmap().
- Fail with EINVAL if an unknown flag is passed to mmap().
- Fail with EINVAL if both MAP_PRIVATE and MAP_SHARED are passed to mmap().
- Require one of either MAP_PRIVATE or MAP_SHARED for non-anonymous
mappings.
Reviewed by: alc, kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D698
Eliminate an exclusive object lock acquisition and release on the expected
execution path.
Do page zeroing before the object lock is acquired rather than during the
time that the object lock is held.
Use vm_pager_free_nonreq() to eliminate duplicated code.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
by ffs and ext2fs. Remove duplicated call to vm_page_zero_invalid(),
done by VOP and by vm_pager_getpages(). Use vm_pager_free_nonreq().
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 6 weeks (after r271596)
path through the NFS clients' getpages functions.
Introduce vm_pager_free_nonreq(). This function can be used to eliminate
code that is duplicated in many getpages functions. Also, in contrast to
the code that currently appears in those getpages functions,
vm_pager_free_nonreq() avoids acquiring an exclusive object lock in one
case.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
The changes should not modify the generated code.
The pager->pgo_putpages() method takes int flags as its fourth
argument, while vnode_pager_putpages() used boolean_t (which is
typedef'ed to int). The flags are from VM_PAGER_* namespace, while
vnode_pager_putpages() passed TRUE and OBJPC_SYNC to VOP_PUTPAGES(),
which both are numerically equal to VM_PAGER_PUT_SYNC.
Noted and reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
isn't being allocated for the last of the requested pages, because a
reservation won't fit in the gap between allocated pages, then the
reservation structure shouldn't be initialized.
While I'm here, improve the nearby comments.
Reported by: jeff, pho
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Prior to this change we triggered ARC reclaim when kmem usage passed 3/4
of the total available, as indicated by vmem_size(kmem_arena, VMEM_ALLOC).
This could lead large amounts of unused RAM e.g. on a 192GB machine with
ARC the only major RAM consumer, 40GB of RAM would remain unused.
The old method has also been seen to result in extreme RAM usage under
certain loads, causing poor performance and stalls.
We now trigger ARC reclaim when the number of free pages drops below the
value defined by the new sysctl vfs.zfs.arc_free_target, which defaults
to the value of vm.v_free_target.
Credit to Karl Denninger for the original patch on which this update was
based.
PR: 191510 and 187594
Tested by: dteske
MFC after: 1 week
Relnotes: yes
Sponsored by: Multiplay
"vm_paging_target() > 0" was a reasonable way of determining if the
inactive queue scan met its target. However, now that other threads
can be allocating pages while the inactive queue scan is running, it's
an unreliable method. The effect of it being unreliable is that we
can start swapping out processes when we didn't intend to.
This issue has existed since the kernel was multithreaded, but the
changes to the inactive queue target in 10.0-RELEASE have made its
effects visible.
This change introduces a more direct method for determining if the
inactive queue scan met its target that is not affected by the actions
of other threads.
Reported by: Steve Polyack
Tested by: pho, Steve Polyack (an earlier version)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
called a scalable path. When several preconditions hold, the vm
object lock for the object containing the faulted page is taken in
read mode, instead of write, which allows parallel faults processing
in the region.
Namely, the fast path is taken when the faulted page already exists
and does not need copy on write, is already fully valid, and not busy.
For technical reasons, fast path is avoided when the fault is the
first write on the vnode object, or when the fault is for wiring or
debugger read or write.
On the fast path, pmap_enter(9) is passed the PMAP_ENTER_NOSLEEP flag,
since object lock is kept. Pmap might fail to create the entry, in
which case the fallback to slow path is performed.
Reviewed by: alc
Tested by: pho (previous version)
Hardware provided and hosted by: The FreeBSD Foundation and
Sentex Data Communications
Sponsored by: The FreeBSD Foundation
MFC after: 2 week
page queue even when the allocation is not wired. It is
responsibility of the vm_page_grab() caller to ensure that the page
does not end on the vm_object queue but not on the pagedaemon queue,
which would effectively create unpageable unwired page.
In exec_map_first_page() and vm_imgact_hold_page(), activate the page
immediately after unbusying it, to avoid leak.
In the uiomove_object_page(), deactivate page before the object is
unlocked. There is no leak, since the page is deactivated after
uiomove_fromphys() finished. But allowing non-queued non-wired page
in the unlocked object queue makes it impossible to assert that leak
does not happen in other places.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
pmap_enter(PMAP_ENTER_NOSLEEP). The PGA_WRITEABLE flag can be set
when either the page is busied, or the owner object is locked.
Update comments, move all assertions about page state when
PGA_WRITEABLE flag is set, into new helper
vm_page_assert_pga_writeable().
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
mapping size (currently unused). The flags includes the fault access
bits, wired flag as PMAP_ENTER_WIRED, and a new flag
PMAP_ENTER_NOSLEEP to indicate that pmap should not sleep.
For powerpc aim both 32 and 64 bit, fix implementation to ensure that
the requested mapping is created when PMAP_ENTER_NOSLEEP is not
specified, in particular, wait for the available memory required to
proceed.
In collaboration with: alc
Tested by: nwhitehorn (ppc aim32 and booke)
Sponsored by: The FreeBSD Foundation and EMC / Isilon Storage Division
MFC after: 2 weeks
swap pager. Swap pager uses a private mutex to protect swap metadata,
and does not rely on the vm object lock to ensure integrity of it.
Weaken the requirement for the vm object lock by only asserting locked
object in vm_pager_page_unswapped(), instead of locked exclusively.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
With the current implementation of managed fictitious ranges when
also using VM_PHYSSEG_DENSE, a user could try to register a
fictitious range that starts inside of vm_page_array, but then
overrruns it (because the end of the fictitious range is greater than
vm_page_array_size + first_page). This would result in PHYS_TO_VM_PAGE
returning unallocated pages from past the end of vm_page_array. The
same could happen if a user tried to register a segment that starts
outside of vm_page_array but ends inside of it.
In order to fix this, allow vm_phys_fictitious_{reg/unreg}_range to
use a set of pages from vm_page_array, and allocate the rest.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, alc
vm/vm_phys.c:
- Allow registering/unregistering fictitious ranges that overrun
vm_page_array.
We continue to use pmap_enter() for that. For unwiring virtual pages, we
now use pmap_unwire(), which unwires a range of virtual addresses instead
of a single virtual page.
Sponsored by: EMC / Isilon Storage Division
pmap_unwire() and vm_object_unwire().
Retire vm_fault_{un,}wire(), since they are no longer used.
(See r268327 and r269134 for the motivation behind this change.)
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
underlying physical pages are mapped by the pmap. If, for example, the
application has performed an mprotect(..., PROT_NONE) on any part of the
wired region, then those pages will no longer be mapped by the pmap.
So, using the pmap to lookup the wired pages in order to unwire them
doesn't always work, and when it doesn't work wired pages are leaked.
To avoid the leak, introduce and use a new function vm_object_unwire()
that locates the wired pages by traversing the object and its backing
objects.
At the same time, switch from using pmap_change_wiring() to the recently
introduced function pmap_unwire() for unwiring the region's mappings.
pmap_unwire() is faster, because it operates a range of virtual addresses
rather than a single virtual page at a time. Moreover, by operating on
a range, it is superpage friendly. It doesn't waste time performing
unnecessary demotions.
Reported by: markj
Reviewed by: kib
Tested by: pho, jmg (arm)
Sponsored by: EMC / Isilon Storage Division
and tmpfs object cannot shadow. In other words, tmpfs vm object is
always at the bottom of the shadow chain.
Reported and tested by: bdrewery
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
vnode for the tmpfs node owning this object. The flag is currently
used for two purposes. First, it allows to correctly handle VV_TEXT
for tmpfs vnode when the ref count on the object is decremented to 1,
similar to vnode_pager_dealloc() for regular filesystems. Second, it
prevents some operations, which are done on OBJT_SWAP vm objects
backing user anonymous memory, but are incorrect for the object owned
by tmpfs node.
The second kind of use of the OBJ_TMPFS flag is incorrect, since the
vnode might be reclaimed, which clears the flag, but vm object
operations must still be disallowed.
Introduce one more flag, OBJ_TMPFS_NODE, which is permanently set on
the object for VREG tmpfs node, and used instead of OBJ_TMPFS to test
whether vm object collapse and similar actions should be disabled.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The number of vm fictitious regions was limited to 8 by default, but
Xen will make heavy usage of those kind of regions in order to map
memory from foreign domains, so instead of increasing the default
number, change the implementation to use a red-black tree to track vm
fictitious ranges.
The public interface remains the same.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, alc
Approved by: gibbs
vm/vm_phys.c:
- Replace the vm fictitious static array with a red-black tree.
- Use a rwlock instead of a mutex, since now we also need to take the
lock in vm_phys_fictitious_to_vm_page, and it can be shared.
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
several reasons for this change:
pmap_change_wiring() has never (in my memory) been used to set the wired
attribute on a virtual page. We have always used pmap_enter() to do that.
Moreover, it is not really safe to use pmap_change_wiring() to set the wired
attribute on a virtual page. The description of pmap_change_wiring() says
that it assumes the existence of a mapping in the pmap. However, non-wired
mappings may be reclaimed by the pmap at any time. (See pmap_collect().)
Many implementations of pmap_change_wiring() will crash if the mapping does
not exist.
pmap_unwire() accepts a range of virtual addresses, whereas
pmap_change_wiring() acts upon a single virtual page. Since we are
typically unwiring a range of virtual addresses, pmap_unwire() will be more
efficient. Moreover, pmap_unwire() allows us to unwire superpage mappings.
Previously, we were forced to demote the superpage mapping, because
pmap_change_wiring() only allowed us to express the unwiring of a single
base page mapping at a time. This added to the overhead of unwiring for
large ranges of addresses, including the implicit unwiring that occurs at
process termination.
Implementations for arm and powerpc will follow.
Discussed with: jeff, marcel
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
