Sean Chittenden
12335de1f5
Backout ataraid rcng script. I must have missed ar0 in my scan of /dev
...
after my first reboot because sure enough, I'm seeing it there now and
ata(4) is doing the right thing(TM).
Pointed out by: des
2003-12-14 13:36:36 +00:00
Sean Chittenden
7e6b2a1467
Add a script that allows software RAID sets to be created before file
...
systems are mounted. An example set of entries for /etc/rc.conf:
ataraid_enable="YES"
ataraid_devices="ar0"
ataraid_ar0_set="ad2 ad3"
ataraid_ar0_type="RAID1"
Because there is no "correct" way of doing ATA raid (ie, geom vs.
atacontrol vs. vinum) that is bikeshed proof, this rcng script stays within
the bounds of atacontrol and assumes that other RAID solutions for GEOM or
vinum will end up in a different rcNG script.
Reviewed by: green
2003-12-14 09:42:02 +00:00
Jesper Skriver
8ea562a029
Fix typo, I forgot daily_ in front of the status_ata_raid_enable
2003-12-12 21:23:27 +00:00
Peter Wemm
a0ac36d5f1
Change rc.d/syscons to not need /usr/sbin/ispcvt to exist. This should
...
make it work for all non-i386 syscons platforms.
2003-12-10 15:48:49 +00:00
Mike Makonnen
ed0bd3657c
o Rename devfs_link() to make_symlink() and turn it into a generic
...
symlinking routine.
o Modify rc.d/jail to create its own symlink relative to the jail's
filesystem
2003-12-09 08:51:11 +00:00
Mike Makonnen
16805414e4
If fdescfs(5) is mounted in a jail unmount it before devfs(5).
...
Submitted by: "Scot W. Hetzel" <hetzelsw@westbend.net>
2003-12-09 08:32:43 +00:00
Mike Makonnen
71516efe7b
If rc.d/mountcritlocal is unable to mount local filesystems,
...
then immediately terminate the shell (during boot this
also terminates the parent rc(8) shell). This was the pre-rcNG behaviour.
Also, remove an extraneous mount /.
PR: conf/57659
Submitted by: yar (with modifications)
2003-12-09 08:17:33 +00:00
Mike Makonnen
7645a316db
Redirect rc(8) output to a file in the jail's /var/log directory.
...
Previously it was redirected to /dev/null.
Submitted by: phk
2003-12-09 08:09:04 +00:00
David E. O'Brien
a5b5101f5e
Move the bktr(4) <arch>/include/ioctl_{bt848,meteor}.h files to dev/bktr
...
as these ioctl's aren't MD. This also means they are installed in
/usr/include/dev/bktr now. Also provide compatability wrappers for
where these headers lived in 4.x.
2003-12-08 07:22:42 +00:00
Mike Makonnen
c4818267a4
When clearing /tmp, X11 lock and temporary files are special.
...
Remove them unconditionaly.
PR: bin/59065
Approved by: re (scottl)
2003-12-01 16:35:57 +00:00
Ruslan Ermilov
c0984da8ae
Scheduled sweep using the README guidelines.
...
Approved by: re (rwatson)
2003-11-29 18:22:01 +00:00
Bruce M Simpson
a2ed0b4e3d
Add a means of starting an IKE daemon from the rc system at an appropriate
...
time during the boot process. This is needed in the case where NFS mounts
from servers reachable only via IPSEC are in /etc/fstab.
PR: conf/42497
Submitted by: Volker Stolz
Approved by: re (rwatson)
2003-11-28 17:28:42 +00:00
Scott Long
90768c55d4
Install UDF header files to unbreak /sbin building when /sys is not present.
...
Submitted by: imura@ryu16.org
2003-11-22 06:08:59 +00:00
Robert Watson
312ee2b722
Add "socket" type to the list of default object types, and by
...
default attempt to list Biba, LOMAC, and MLS label information
for the socket if they are present.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
2003-11-15 02:08:01 +00:00
Robert Watson
ef9cbd37be
Use the new "default_labels" syntax in the default mac.conf file.
...
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
2003-11-11 03:30:29 +00:00
Hartmut Brandt
93a44b1a3a
Create sub-directories under share for bsnmp tree definition and MIB files.
2003-11-10 09:06:38 +00:00
Hartmut Brandt
fedcb97765
Create a subdirectory where bsnmp include files will be stuffed to.
2003-11-10 09:04:24 +00:00
Robert Watson
b573fedaf3
If available, also print the lomac label by default for processes, files,
...
and interfaces. This avoids the need to manually add these when setting
up LOMAC.
Pointed out by: tjr
2003-11-08 17:51:50 +00:00
David Xu
fe9f88fc14
Use space instead of tab.
2003-11-08 05:18:25 +00:00
Robert Watson
c2021aea59
Add /usr/share/security to directories to create in order to hold
...
LOMAC context information.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
2003-11-08 00:41:41 +00:00
Ruslan Ermilov
9ef295f29e
Use %e in the date(1) format string to eliminate the sed(1) command.
2003-11-07 21:55:35 +00:00
Hartmut Brandt
53c9e0f3aa
Add a sub-directory for the signalling layer headers of NgATM.
2003-11-07 08:57:42 +00:00
David Xu
e461ba58ab
Enable GB2312 locale.
2003-11-05 23:39:03 +00:00
Maxime Henrion
0bb582b106
Change a bogus -n parameter to echo(1).
2003-11-03 17:03:01 +00:00
Hartmut Brandt
62230fec65
Add a sub-directory for the NgATM message encoding/decoding
...
header files.
2003-11-03 12:26:47 +00:00
Mark Murray
d7a606482c
Use a better way to take NO_LPR into account, and correctly check the
...
NOCRYPT macro when looking at crypto.
Reminded by: ru
2003-11-02 22:13:36 +00:00
Ruslan Ermilov
2faf03309d
DNS should not necessarily be named(8), tweak the comment a bit.
2003-11-02 07:31:44 +00:00
Hajimu UMEMOTO
2fa02b748e
install address selection policy into kernel when there is
...
/etc/ip6addrctl.conf.
following sample of ip6addrctl.conf is a good default:
#Prefix Precedence Label
::1/128 50 0
::/0 40 1
2002::/16 30 2
::/96 20 3
::ffff:0:0/96 10 4
2003-10-30 17:55:52 +00:00
Jesper Skriver
9eebf81523
Add status checking of ATA raid to the daily periodic scripts.
2003-10-27 20:14:53 +00:00
Maksim Yevmenkin
6b67dc6f60
Create missing /usr/share/examples/netgraph/bluetooth directory
2003-10-27 16:10:05 +00:00
Maksim Yevmenkin
e6ef35a90b
Connect /etc/bluetooth and /usr/share/examples/netgraph/bluetooth to the build.
...
Reviewed by: imp, simon
Approved by: imp (mentor)
2003-10-26 19:09:12 +00:00
Nate Lawson
9b937d4836
Add devctl(4) notify support to ACPI. Various subsystems now notify
...
userland whenever events occur. See the example in devd.conf below
to see how to use it.
2003-10-25 05:03:25 +00:00
Hidetoshi Shimokawa
869093b15d
Add dumb console driver and related bits.
...
dcons(4): very simple console and gdb port driver
dcons_crom(4): FireWire attachment
dconschat(8): User interface to dcons
Tested with: i386, i386-PAE, and sparc64.
2003-10-24 15:44:10 +00:00
Hartmut Brandt
a25f8a3d51
Add a sub-directory to netnatm for the SAAL headers.
2003-10-22 13:15:09 +00:00
Warner Losh
4d59cc852d
Modernize examples/usage. Kill 1200/300 baud modem entries and
...
instead use 14.4kbps and faster modems as examples. Separate line
speed and baud rate and be careful when talking of one verses the
other.
2003-10-21 19:15:29 +00:00
Gregory Neil Shapiro
93227805ff
Before trying to restart/stop the MTA or MSP queue runner, make sure
...
we are configured to use an MTA or MSP queue runner. Otherwise the
script used to complain about the missing PID file.
PR: conf/57075
Submitted by: Jonathan Chen <jonc@chen.org.nz>
MFC after: 2 weeks
2003-10-19 00:31:50 +00:00
Gregory Neil Shapiro
1f9b7c9633
Adding WorkAroundBrokenAAAA seems a necessity even in the submit.mc given
...
the number of broken DNS servers out there in the world. Since we are
diverging from the sendmail.org submit.mc, it's time to make our own
freebsd.submit.mc.
PR: conf/57733
Reviewed by: nork
MFC after: 2 weeks
2003-10-19 00:03:13 +00:00
Dag-Erling Smørgrav
aeba777e45
There is no network2 any more.
...
Pointy hat to: mtm
2003-10-13 10:36:26 +00:00
Doug Barton
809a0e6290
* Remove the OS specific bits, since NetBSD isn't interested in
...
porting this stuff back.
* Test /etc/motd for writability before trying to update it. This is
especially useful when /etc/ is mounted ro, like on a diskless boot.
(Thanks to phk for the idea on this one.)
* Make the "updating" message reflect what actually happens.
2003-10-13 08:44:07 +00:00
Doug Barton
76f9428757
Remove trailing whitespace
2003-10-13 08:20:55 +00:00
Doug Barton
9f29b7170b
Update references to rc.diskless[12]
2003-10-13 08:18:05 +00:00
Maksim Yevmenkin
0986ab12e4
Update Bluetooth code.
...
Reviewed by: M. Warner Losh <imp@bsdimp.com>; John Hay <jhay@freebsd.org>
Approved by: M. Warner Losh <imp@bsdimp.com> (mentor)
2003-10-12 22:04:24 +00:00
Kris Kennaway
63d707097e
Bump default /etc size from 2MB to 5MB to deal with bloat^Wgrowth in
...
the size of /etc.
2003-10-12 00:19:45 +00:00
Max Khon
d2038d56f2
/usr/libdata/msdosfs is no longer used, because of kiconv(3) commit.
...
PR: 57277
Submitted by: Ryuichiro Imura <imura@ryu16.org>
2003-10-11 11:57:03 +00:00
Jacques Vidrine
23b1827ab3
Install additional headers for Kerberos (libkafs, libkadm5*, and
...
libhdb).
2003-10-09 19:50:00 +00:00
Bruce M Simpson
31beefc274
Correct definition for 1000/tcp and 1000/udp, sync with
...
<URL:http://www.iana.org/assignments/port-numbers >.
Submitted by: Roman Newhauser <roman@bellavista.cz>
2003-10-08 08:48:43 +00:00
Bruce M Simpson
0c5bdf9995
Add port assignment for Subversion, as per
...
<URL:http://www.iana.org/assignments/port-numbers >.
PR: conf/54371
Submitted by: Roman Newhauser <roman@bellavista.cz>
MFC after: 1 week
2003-10-08 08:43:17 +00:00
Warner Losh
e2b40c9599
any -> ? for new entry (to allow time for people to upgrade their pccardd)
2003-10-04 18:44:29 +00:00
Poul-Henning Kamp
77e8ad5714
Default ntpd to write a "driftfile" in /var/db/ntpd.drift.
...
A "driftfile" caches the oscillator offset estimate from boot to boot,
having this means faster and less bumpy time synchronization. Will
be overridden by any value in the config file.
2003-10-03 21:33:40 +00:00
Poul-Henning Kamp
e0f8a7e7af
Fix typo.
...
Spotted by: "Bjoern A. Zeeb" <bzeeb@zabbadoz.net>
2003-10-03 19:57:58 +00:00