as lib/libc/tests/stdlib
- Make the code a bit more style(9) compliant
- Convert a sizeof(x)/sizeof(x[0]) to nitems
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
ccache is mostly beneficial for frequent builds where -DNO_CLEAN is not
used to achieve a safe pseudo-incremental build. This is explained in
more detail upstream [1] [2]. It incurs about a 20%-28% hit to populate the
cache, but with a full cache saves 30-50% in build times. When combined with
the WITH_FAST_DEPEND feature it saves up to 65% since ccache does cache the
resulting dependency file, which it does not do when using mkdep(1)/'CC
-E'. Stats are provided at the end of this message.
This removes the need to modify /etc/make.conf with the CC:= and CXX:=
lines which conflicted with external compiler support [3] (causing the
bootstrap compiler to not be built which lead to obscure failures [4]),
incorrectly invoked ccache in various stages, required CCACHE_CPP2 to avoid
Clang errors with parenthesis, and did not work with META_MODE.
The option name was picked to match the existing option in ports. This
feature is available for both in-src and out-of-src builds that use
/usr/share/mk.
Linking, assembly compiles, and pre-processing avoid using ccache since it is
only overhead. ccache does nothing special in these modes, although there is
no harm in calling it for them.
CCACHE_COMPILERCHECK is set to 'content' when using the in-tree bootstrap
compiler to hash the content of the compiler binary to determine if it
should be a cache miss. For external compilers the 'mtime' option is used
as it is more efficient and likely to be correct. Future work may optimize the
'content' check using the same checks as whether a bootstrap compiler is needed
to be built.
The CCACHE_CPP2 pessimization is currently default in our devel/ccache
port due to Clang requiring it. Clang's -Wparentheses-equality,
-Wtautological-compare, and -Wself-assign warnings do not mix well with
compiling already-pre-processed code that may have expanded macros that
trigger the warnings. GCC has so far not had this issue so it is allowed to
disable the CCACHE_CPP2 default in our port.
Sharing a cache between multiple checkouts, or systems, is explained in
the ccache manual. Sharing a cache over NFS would likely not be worth
it, but syncing cache directories between systems may be useful for an
organization. There is also a memcached backend available [5]. Due to using
an object directory outside of the source directory though you will need to
ensure that both are in the same prefix and all users use the same layout. A
possible working layout is as follows:
Source: /some/prefix/src1
Source: /some/prefix/src2
Source: /some/prefix/src3
Objdir: /some/prefix/obj
Environment: CCACHE_BASEDIR='${SRCTOP:H}' MAKEOBJDIRPREFIX='${SRCTOP:H}/obj'
This will use src*/../obj as the MAKEOBJDIRPREFIX and tells ccache to replace
all absolute paths to be relative. Using something like this is required due
to -I and -o flags containing both SRC and OBJDIR absolute paths that ccache
adds into its hash for the object without CCACHE_BASEDIR.
distcc can be hooked into by setting CCACHE_PREFIX=/usr/local/bin/distcc.
I have not personally tested this and assume it will not mix well with
using the bootstrap compiler.
The cache from buildworld can be reused in a subdir by first running
'make buildenv' (from r290424).
Note that the cache is currently different depending on whether -j is
used or not due to ccache enabling -fdiagnostics-color automatically if
stderr is a TTY, which bmake only does if not using -j.
The system I used for testing was:
WITNESS
Build options: -j20 WITH_LLDB=yes WITH_DEBUG_FILES=yes WITH_CCACHE_BUILD=yes
DISK: ZFS 3-way mirror with very slow disks using SSD l2arc/log.
The arc was fully populated with src tree files and ccache objects.
RAM: 76GiB
CPU: Intel(R) Xeon(R) CPU L5520 @2.27GHz
2 package(s) x 4 core(s) x 2 SMT threads = hw.ncpu=16
The WITH_FAST_DEPEND feature was used for comparison here as well to show
the dramatic time savings with a full cache.
buildworld:
x buildworld-before
+ buildworld-ccache-empty
* buildworld-ccache-full
% buildworld-ccache-full-fastdep
# buildworld-fastdep
+-------------------------------------------------------------------------------+
|% * # +|
|% * # +|
|% * # xxx +|
| |A |
| A|
| A |
|A |
| A |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 3744.13 3794.31 3752.25 3763.5633 26.935139
+ 3 4519 4525.04 4520.73 4521.59 3.1104823
Difference at 95.0% confidence
758.027 +/- 43.4565
20.1412% +/- 1.15466%
(Student's t, pooled s = 19.1726)
* 3 1823.08 1827.2 1825.62 1825.3 2.0785572
Difference at 95.0% confidence
-1938.26 +/- 43.298
-51.5007% +/- 1.15045%
(Student's t, pooled s = 19.1026)
% 3 1266.96 1279.37 1270.47 1272.2667 6.3971113
Difference at 95.0% confidence
-2491.3 +/- 44.3704
-66.1952% +/- 1.17895%
(Student's t, pooled s = 19.5758)
# 3 3153.34 3155.16 3154.2 3154.2333 0.91045776
Difference at 95.0% confidence
-609.33 +/- 43.1943
-16.1902% +/- 1.1477%
(Student's t, pooled s = 19.0569)
buildkernel:
x buildkernel-before
+ buildkernel-ccache-empty
* buildkernel-ccache-empty-fastdep
% buildkernel-ccache-full
# buildkernel-ccache-full-fastdep
@ buildkernel-fastdep
+-------------------------------------------------------------------------------+
|# @ % * |
|# @ % * x + |
|# @ % * xx ++|
| MA |
| MA|
| A |
| A |
|A |
| A |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 571.57 573.94 571.79 572.43333 1.3094401
+ 3 727.97 731.91 728.06 729.31333 2.2492295
Difference at 95.0% confidence
156.88 +/- 4.17129
27.4058% +/- 0.728695%
(Student's t, pooled s = 1.84034)
* 3 527.1 528.29 528.08 527.82333 0.63516402
Difference at 95.0% confidence
-44.61 +/- 2.33254
-7.79305% +/- 0.407478%
(Student's t, pooled s = 1.02909)
% 3 400.4 401.05 400.62 400.69 0.3306055
Difference at 95.0% confidence
-171.743 +/- 2.16453
-30.0023% +/- 0.378128%
(Student's t, pooled s = 0.954969)
# 3 201.94 203.34 202.28 202.52 0.73020545
Difference at 95.0% confidence
-369.913 +/- 2.40293
-64.6212% +/- 0.419774%
(Student's t, pooled s = 1.06015)
@ 3 369.12 370.57 369.3 369.66333 0.79033748
Difference at 95.0% confidence
-202.77 +/- 2.45131
-35.4225% +/- 0.428227%
(Student's t, pooled s = 1.0815)
[1] https://ccache.samba.org/performance.html
[2] http://www.mail-archive.com/ccache@lists.samba.org/msg00576.html
[3] https://reviews.freebsd.org/D3484
[5] https://github.com/jrosdahl/ccache/pull/30
PR: 182944 [4]
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
Relnotes: yes
This speeds up buildworld by 16% on my system and buildkernel by 35%.
Rather than calling mkdep(1), which is just a wrapper around 'cc -E',
use the modern -MD -MT -MF flags to gather and generate dependencies during
compilation. This flag was introduced in GCC "a long time ago", in GCC 3.0,
and is also supported by Clang. (It appears that ICC also supports this but I
do not have access to test it). This avoids running the preprocessor *twice*
for every build, in both 'make depend' and 'make all'. This is especially
noticeable when using ccache since it does not cache preprocessor results from
mkdep(1) / 'cc -E', but still speeds up compilation with the -MD flags.
For 'make depend' a tree-walk is still done to ensure that all DPSRCS
are generated when expected, and that beforedepend/afterdepend and
_EXTRADEPEND are all still respected. In time this may change but for now
I've been conservative. The time for a tree-walk with -j combined with
SUBDIR_PARALLEL is not significant. For example, it takes about 9 seconds
with -j15 to walk all of src/ for 'make depend' now on my system.
A .depend file is still generated with the various rules that apply to
the final target, or custom rules. Otherwise there are now
per-built-object-file .depend files, such as .depend.filename.o. These
are included directly by make rather than populating .depend with a loop
and .depend lines, which only added overhead to the now almost-NOP 'make
depend' phase.
Before this I experimented with having mkdep(1) called in parallel per-file.
While this improved the kernel and lib/libc 'make depend' phase, it resulted
in slower build times overall.
The -M flags are removed from CFLAGS when linking since they have no effect.
Enabling this by default, for src or out-of-src, can be done once more testing
has been done, such as a ports exp-run, and with more compilers.
The system I used for testing was:
WITNESS
Build options: -j20 WITH_LLDB=yes WITH_DEBUG_FILES=yes WITH_FAST_DEPEND=yes
DISK: ZFS 3-way mirror with very slow disks using SSD l2arc/log.
The arc was fully populated with src tree files.
RAM: 76GiB
CPU: Intel(R) Xeon(R) CPU L5520 @2.27GHz
2 package(s) x 4 core(s) x 2 SMT threads = hw.ncpu=16
buildworld:
x buildworld-before
+ buildworld-fastdep
+-------------------------------------------------------------------------------+
|+ |
|+ |
|+ xx x|
| |_MA___||
|A |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 3744.13 3794.31 3752.25 3763.5633 26.935139
+ 3 3153.34 3155.16 3154.2 3154.2333 0.91045776
Difference at 95.0% confidence
-609.33 +/- 43.1943
-16.1902% +/- 1.1477%
(Student's t, pooled s = 19.0569)
buildkernel:
x buildkernel-before
+ buildkernel-fastdep
+-------------------------------------------------------------------------------+
|+ x |
|++ xx|
| A||
|A| |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 571.57 573.94 571.79 572.43333 1.3094401
+ 3 369.12 370.57 369.3 369.66333 0.79033748
Difference at 95.0% confidence
-202.77 +/- 2.45131
-35.4225% +/- 0.428227%
(Student's t, pooled s = 1.0815)
Sponsored by: EMC / Isilon Storage Division
MFC after: 3 weeks
Relnotes: yes
The command was checking local/remote system uptime, so rename the script to
match its function and to avoid confusion
The controlling variable in /etc/periodic.conf has been renamed from
daily_status_rwho_enable to daily_status_uptime_enable.
MFC after: 3 days
Reported by: Peter Jeremy <peter@rulingia.com>
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
MK_USB != no
Add the manpages to OptionalObsoleteFiles.inc
As a side-effect, this also fixes installworld with MK_USB == no
X-MFC with: r290128
Sponsored by: EMC / Isilon Storage Division
Other sidenotes:
- Remove unused variables with main(..)
- Convert errx/exit with -1 to errx/exit with 1
- Fix a bogus test in try_directory_open
(expected_errno == expected_errno -> errno == expected_errno) [*]
- Fix some warnings related to discarded qualifiers
- Remove a bogus else-statement at the end of check_mmap_exec(..) in the
successful case. mmap(2), POSIX, Linux, etc all don't state what the
behavior is when mixing O_WRONLY + PROT_EXEC, so assume success for now to
get the test program to pass again.
PR: 201286 [*]
MFC after: 1 week
Submitted by: David Binderman <dcb314@hotmail.com>
Sponsored by: EMC / Isilon Storage Division
Allows DMA from/to arbitrary KVA or physical address. /dev/ioat_test
must be enabled by root and is only R/W root, so this is approximately
as dangerous as /dev/mem and /dev/kmem.
Sponsored by: EMC / Isilon Storage Division
listen, and connect. The listen program is a simple server that
accepts and closes sockets, until a fixed limit, then sets the listen
queue to 0 and counts how many remaining connections it processes.
The connect program repeatedly opens connections and closes them
serving as the driver for the listen program.
Sponsored by: Limelight Networks
The IOAT hardware supports writing a 64-bit pattern to some destination
buffer. The same limitations on buffer length apply as for copy
operations. Throughput is a bit higher (probably because fill does not
have to spend bandwidth reading from a source in memory).
Support for testing Block Fill has been added to ioatcontrol(8) and the
ioat_test device. ioatcontrol(8) accepts the '-f' flag, which tests
Block Fill. (If the flag is omitted, the tool tests copy by default.)
The '-V' flag, in conjunction with '-f', verifies that buffers are
filled in the expected pattern.
Tested on: Broadwell DE (Xeon D-1500)
Sponsored by: EMC / Isilon Storage Division
The test logic now preallocates memory before running the test.
The buffer size is now configurable. Post-copy verification is
configurable. The number of copies to chain into one transaction (one
interrupt) is configurable.
A 'duration' mode is added, which repeats the test until the duration
has elapsed, reporting the B/s and transactions completed.
ioatcontrol.8 has been updated to document the new arguments.
Initial limits (on this particular Broadwell-DE) (and when the
interrupts are working) seem to be: 256 interrupts/sec or ~6 GB/s,
whichever limit is more restrictive.
Unfortunately, it seems the interrupt-reset handling on Broadwell isn't
working as intended. That will be fixed in a later commit.
Sponsored by: EMC / Isilon Storage Division
Extend OptionalObsoleteFiles.inc to delete all lib32 files when MK_LIB32 is
set to no on a system that previously had lib32 libraries installed.
Also, to prevent "make delete-old-dirs" from always deleting lib32 directories
after an installworld, move the lib32 subtree to its own mtree file that only
gets applied when MK_LIB32=yes.
Test: Ran "make delete-old" and "make delete-old-libs" on a system that never
had MK_LIB32 enabled, and on a system where MK_LIB32 was enabled and later
disabled. Did this both on amd64 and powerpc64.
Test: Ran "make tinderbox" without errors.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D3923
- Make the requirements more complete for the testcases
- Detect prerequisites so the tests won't fail (zfs.ko is loaded, zpool(1)
is available, ACL support is enabled with UFS, etc).
- Work with temporary files/directories/mountpoints that work with atf/kyua
- Limit the testcases to work on temporary filesystems to reduce tainting the
test host
MFC after: 2 weeks
Reviewed by: trasz (earlier version)
Differential Revision: https://reviews.freebsd.org/D3810
test suite as tests/sys/posixshm
Some other highlights:
- Convert the testcases over to ATF
- Don't use hardcoded paths to /tmp (which violate the ATF/kyua samdbox); use
mkstemp to generate temporary paths for non-SHM_ANON shm objects.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Compare the fields that the AMD [1] and Intel [2] specs say will be
set once fnstenv returns.
Not all amd64 capable processors zero out the env.__x87.__other field
(example: AMD Opteron 6308). The AMD64/x64 specs aren't explicit on what the
env.__x87.__other field will contain after fnstenv is executed, so the values
in env.__x87.__other could be filled with arbitrary data depending on how the
CPU-specific implementation of fnstenv.
1. http://support.amd.com/TechDocs/26569_APM_v5.pdf
2. http://www.intel.com/Assets/en_US/PDF/manual/253666.pdf
Discussed with: kib, Anton Rang <anton.rang@isilon.com>
Reviewed by: Daniel O'Connor <darius@dons.net.au> (earlier patch; pre-generalization)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Reported by: Bill Morchin <wmorchin@isilon.com>
Also note that these env-only vars can be specified on the command line.
This fixes the dependent options that are env-only (such as WITH_META_MODE
and WITH_AUTO_OBJ) to properly display their dependencies.
Sponsored by: EMC / Isilon Storage Division
connectivity interact with the net80211 stack.
Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.
Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:
- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.
Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.
Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.
Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
I/OAT is also referred to as Crystal Beach DMA and is a Platform Storage
Extension (PSE) on some Intel server platforms.
This driver currently supports DMA descriptors only and is part of a
larger effort to upstream an interconnect between multiple systems using
the Non-Transparent Bridge (NTB) PSE.
For now, this driver is only built on AMD64 platforms. It may be ported
to work on i386 later, if that is desired. The hardware is exclusive to
x86.
Further documentation on ioat(4), including API documentation and usage,
can be found in the new manual page.
Bring in a test tool, ioatcontrol(8), in tools/tools/ioat. The test
tool is not hooked up to the build and is not intended for end users.
Submitted by: jimharris, Carl Delsey <carl.r.delsey@intel.com>
Reviewed by: jimharris (reviewed my changes)
Approved by: markj (mentor)
Relnotes: yes
Sponsored by: Intel
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3456
Distinguish between WRDE_BADVAL and WRDE_SYNTAX based on when the error
occurred (parsing or execution), not based on whether WRDE_UNDEF was passed.
Also, return WRDE_NOSPACE for a few more unexpected results from sh.
The option was added only to ease the transition from GNU Binutils to
ELF Tool Chain tools, and that process is now complete (for the viable
replacements). Noting the removal in UPDATING is sufficient as we have
not shipped a release with the option.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3240
Those tools were modified and extended by John Marino <draco@marino.st>
Add the generated charmaps and maps for LC_CTYPE generation
Obtained from: Dragonfly
with the net80211 stack.
Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.
Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:
- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.
Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.
Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to Olivier Cochard, gjb@, mmoll@,
op@ and lev@, who also participated in testing. Details here:
https://wiki.freebsd.org/projects/ifnet/net80211
Still, drivers: ndis, wtap, mwl, ipw, bwn, wi, upgt, uath were not
tested. Changes to mwl, ipw, bwn, wi, upgt are trivial and chances
of problems are low. The wtap wasn't compilable even before this change.
But the ndis driver is complex, and it is likely to be broken with this
commit. Help with testing and debugging it is appreciated.
Differential Revision: D2655, D2740
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
ethernet controller. The ethernet controller is emulated by VMware
Fusion (for example) and is a good device to demonstrate how to use
the bus space and busdma functions due to its simple programming.
The program sets up the DMA structures, sends a DHCP discover packet,
waits 2 seconds, and iterates over the receive ring for an offer.
ELF Tool Chain elfcopy is nearly a drop-in replacement for GNU objcopy,
but does not currently support PE output which is needed for building
x86 UEFI bits.
Add a src.conf knob to allow installing it as objcopy and set it by
default for aarch64 only, where we don't have a native binutils.
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2887
identification (e.g. isa:0x3f0 or pci0:2:1:0). In libbus,
the device is turned into a path name. For bus_space_map(),
the resource is now specified in a second argument.
Before:
bus.map('/dev/proto/pci0:2:1:0/pcicfg')
busdma.tag_create('/dev/proto/pci0:2:1:0/busdma', ...)
Now:
bus.map('pci0:2:1:0', 'pcicfg')
busdma.tag_create('pci0:2:1:0', ...)
Rationale: ident(1) is useful out of RCS, lot of scripts are using ident(1) and
failing when base is built WITHOUT_RCS.
This version is:
- fully compatible with RCS 5.7 ident.
- fully compatible with RCS 5.9 ident.
- passes all ident test from GNU RCS 5.9 test suite
This version has support for: svn extension for the Keyword id (double colon and
# before last $)
Différences with GNU RCS ident:
- no long options as found in GNU RCS 5.9 (but not commented there).
- '-V' reports nothing but has been added for compatibility.
Differential Revision: https://reviews.freebsd.org/D3200
Reviewed by: pfg
because for no mailwrapper case we have:
/usr/sbin/sendmail -> /usr/sbin/mailwrapper
/usr/sbin/mailwrapper -> /usr/libexec/sendmail/sendmail
Add comment explaining it.
While here:
1. have the Python bindings contain constants for the space
identifiers and the sync operation.
2. change the segment iterators to return None when done,
not ENXIO.
It is required for other tools in base and/or ports like dma(8) or any MTA
available in ports. It is also build and installed anyway even if world is built
WITHOUT_SENDMAIL
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
This change among other things improve search capabilities over the manpages
allowing fine grain query.
A new build option WITHOUT_MANDOCDB has been added to keep the ancient version
of the database and the tools. The plan is to entirely remove this option before
11.0-RELEASE.
Differential Revision: https://reviews.freebsd.org/D2603
Clang uses compiler-rt for the code coverage runtime, and ports GCC
provides its own libgcov.
PR: 200203 (exp-run)
Sponsored by: The FreeBSD Foundation
Without these CFLAGS settings a cross-compile won't find the headers
anywhere.
Tested:
* mips (32, big endian) cross-build w/ LOCAL_DIRS including these
tools.
previous releases.
Also add a stdlib.h wrapper, which declares the function, otherwise the
compiler may assume it returns int, which can cause segfaults on LP64
architectures.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D2558
Clang's OpenMP support will emit Intel OpenMP API library calls,
and will therefore require libiomp (or whatever name is settled on).
An up-to-date version of libgomp is included in ports or pkg GCC.
Thus, there is no reason to build base libgomp without base system GCC.
PR: 199979 (exp-run)
Reviewed by: pfg
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2459
- Optional components go in OptionalObsoleteFiles
- Move gperf removal to be based on MK_GCC only, not MK_CXX and MK_GCC
Reviewed by: imp, sbruno
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2421
