Files sysdep.[ch] are now in ${MACHINE_ARCH} subdirectory. Internal
#if's used to identify the platform where removed.
Make rule for target testmain was greatly simplified, because it was
easier simplifying it than changing it to support the new location of
sysdep.[ch].
(a repo-copy was done on sysdep.[ch], of course)
vm_map always failed because vm_map_lookup() looked at
"vm_map_entry->wired_count" instead of "(vm_map_entry->eflags &
MAP_ENTRY_USER_WIRED)". The effect was that many page
wiring operations by sysctl were (silently) failing.
Since an osigcontext is smaller, if you check for a valid (much larger sized)
ucontext_t and it fails, we bogusly would reject the osigcontext as per
rev 1.378. Instead, check for osigcontext range validity first, and
ucontext_t later. This unbreaks Netscape.
Pointed to the right commit by: peter
Semiconductor CS461x/428x.
- Add support for GUS and CS461x/428x pcm.
- Move newpcm drivers for ISA cards to files.i386. The drivers for
PC98 would be something quite different from those for PC/AT.
Moving requested by: nyan
of element [4] in both, which goes beyond the end of the array, leaving
[0], [1], [2], and [3]. This bug did not cause any problems since
the overrun fields are initialized after the bogus array init but
needs to be fixed anyway.
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
pci_probe_nomatch, so it won't be in the way when loading USB as a module.
The reason for them being there in the first place is that every
motherboard comes with USB kit and this way it looks more pretty (peter).
The real solution will be to define some method of detaching a driver
after it has attached.
for IPv6 yet)
With this patch, you can assigne IPv6 addr automatically, and can reply to
IPv6 ping.
Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
saprevent when we're doing an OFFLINE ioctl- saprevent
won't unlock the door, which then causes the unload to
fail on some units.
If we've already unloaded the tape, don't try and rewind and
unload in saclose. This is a slightly riskier change because
we're now going to depend on SA_FLAG_TAPE_MOUNTED to say whether
we've really unloaded the tape. This involved changing the
setting in sadone for tape errors to SA_FLAG_TAPE_FROZEN (which
is more accurate anyway-if you get an EIO you've probably lost
tape position anyway) where it used to just clear the mounted
flag.
p_trespass(struct proc *p1, struct proc *p2)
which returns zero or an errno depending on the legality of p1 trespassing
on p2.
Replace kern_sig.c:CANSIGNAL() with call to p_trespass() and one
extra signal related check.
Replace procfs.h:CHECKIO() macros with calls to p_trespass().
Only show command lines to process which can trespass on the target
process.
and shiny usbd daemon to handle events.
usb_port.h:
- Add a macro to retrieve the unit number from a USBBASEDEVICE
usb.h, usb_subr.c:
- Add fields to the device_info struct.
usb_subr.c:
- Fill in the new fields.
- Remove the notification of the event up a bit to make sure all the
information is still available to fill the usb_devinfo struct.
This requires recompilation of usbdevs (src/usr.sbin/usbdevs) and the
ezdownload/ezupload (ports/misc/ezload) utilities in any case.
I've made a seperate version (c_index() etc) that use const/const, but
I'm not sure it's worth it considering there is one file in the tree
that uses index on const strings (kern_linker.c) and it's easily adjusted
to scan the strings directly (and is perhaps more efficient that way).
of queue entries have to be at least 16 bits now! If we're running
a 2100 less than rev 5, turn off loop fairness (per Qlogic errata). Fix
typo in checking against 2200 F/W revision. Slightly fix/reorder fabric
login stuff. Change to usage of isp_getrqentry for code clarity. Add some
defensive dual bus assumptions. Various cleanups, etc...
Role the core version minor number. Change the arguments to the dma
setup function to use a u_int16_t for the output request loop pointer
(truly amazing that this hasn't blown up in anyones face so far). Do
some shuffling around of some items.
by Qlogic. The firmware is now also kept from compiling by default
unless some config options are set.
While we're at it, roll the 2200 f/w to 2.01.0. Still need to get the
1.17.26 2100 f/w working as it solves a lot of problems but it doesn't
want to work yet with this driver (:-)).
ISP_COMPILE_1020_FW compile in Qlogic 1020/1040 PCI SCSI f/w
ISP_COMPILE_1080_FW compile in Qlogic 1080/1240/1280 PCI LVD SCSI f/w
ISP_COMPILE_2100_FW compile in Qlogic 2100 Fibre Channel f/w
ISP_COMPILE_2200_FW compile in Qlogic 2200 Fibre Channel f/w
ISP_COMPILE_FW compile in all firmware (overrides the others)
These are not on by default, thus saving about 200KBytes.
Additionally:
SCSI_ISP_WWN to define a WWN to use
out of the PCI CLASS reg and store it in the softc. Use the getenv_quad
function to get a WWN override from the environment. Look for a config
value for same. Make slightly less lame the wwn seed construction.
is documented to be 0x18 in the Adaptec manual, however there appears to
be a newer board rev with code 0x19. I added a #define for this and
updated the probe code so that this board will be properly identified
in the probe messages. (Currently it's just identified generically as
an AIC-6915 chip.)
o Delete pcic1 from NEWCARD
o Add explicit resource hints to pcic0
o Get attach working with newbus, kinda (it does all the newbus stuff,
but doesn't try to attach the pccard yet, too many panics).
o Disable ie0 and le0 in NEWCARD config. There appears to be a bug in
the isa_compat code wrt memory conflicts with newbus drivers for
reasons unknown.
o Minor cleanups.
to use a locked cmpexg when unlocking a lock that we already hold, since
nobody else can touch the lock while we hold it. Second, it is not
necessary to use a locked cmpexg when locking a lock that we already
hold, for the same reason. These changes will allow MP locks to be used
recursively without impacting performance.
Modify two procedures that are called only by assembly and are already
NOPROF entries to pass a critical argument in %edx instead of on the
stack, removing a significant amount of code from the critical path
as a consequence.
Reviewed by: Alfred Perlstein <bright@wintelcom.net>, Peter Wemm <peter@netplex.com.au>
linked list to store the callbak routines. The patch converts the
lists to queue(3) TAILQs, making the code slightly clearer and ensuring
that callbacks are executed in FIFO order.
Man page also updated as necesary.
(discontinued use of M_TEMP malloc type while here anyway /phk)
Submitted by: Jake Burkholder jake@checker.org
PR: 14912
to use a locked cmpexg when unlocking a lock that we already hold, since
nobody else can touch the lock while we hold it. Second, it is not
necessary to use a locked cmpexg when locking a lock that we already
hold, for the same reason. These changes will allow MP locks to be used
recursively without impacting performance.
Modify two procedures that are called only by assembly and are already
NOPROF entries to pass a critical argument in %edx instead of on the
stack, removing a significant amount of code from the critical path
as a consequence.
Reviewed by: Alfred Perlstein <bright@wintelcom.net>, Peter Wemm <peter@netplex.com.au>
was likely to be counted as idle time.
Note that we are counting time spent in software interrupt handlers as
interrupt time, so this invalidates the i386 meaning of intr_nesting_level.
Reviewed by: dfr, bde
Tested by: anderson@cs.duke.edu
ES1371 and ES1373 PCI Audio Sound Chips.
The 1371 and 1373 can be found on newer CreativeLabs/Ensoniq
sound cards such as the SoundBlaster PCI 16,64 and 128.
Submitted by: Russell Cattelan <cattelan@thebarn.com>
Obtained from: Parts obtained from linux, but rewritten by Russell
that breaks if you try and compile a kernel before building world, as
is presently required to get past the signal changes. I don't
particularly like doing this, but at least it will mean that a 'make world'
will activate the gcc 2.95.2-specific option in bsd.kern.mk.
host->pci bridge specifically, then add a pcib0 device on the motherboard
for the pci bus to hang off.
Requested by: Anders Andersson <anders@sanyusan.se>
Obtained from: dfr
returned to user mode in the spare fields of the stat structure.
PR: kern/14966
Reviewed by: dillon@freebsd.org
Submitted by: Kelly Yancey kbyanc@posi.net
Remove EXTRA_SIO/NSIOTOT and make it fully dynamic (from dev/sio/sio.c)
Make sio work for pccard here - pccardd doesn't activate interrupts
until after prove has succeeded.
Mark the initial reset of likely sio ports as broken as it depended on
config supplying a list of locations to probe, devices are now proved
standalone.
Optimize a bit of COM_NOAST4() logic.
Use bus_get_resource_start() etc rather than using isa-centric calls.
Reactivate the IIR_TXRDYBUG test, I've got a card here with it.
Try to be a bit smarter about activating interrupts (ie: don't panic
if polled)
Fix some style bugs that have crept in over time (there are still more).
make development easier and push the ability of newbus to load busses
to the test.
Not added to sys/modules/Makefile because it isn't ready to break the
nightly snapshots for alpha yet :-).
NOTE: This is only for NEWCARD. The old pccard stuff will not build
as a loadable module.
multiplexed underlying swap devices (/dev/drum). The only thing it did
was to allow root to open /dev/drum, but not do anything with it.
Various utilities used to grovel around in here, but Matt has written
a much nicer (and clean) front-end to this for libkvm, and nothing uses
the old system any more.
The VM system was calling VOP_STRATEGY() on the vp of the first underlying
swap device (not the /dev/drum one, the first real device), and using
the VOP system to indirectly (and only) call swstrategy() to choose
an underlying device and enqueue it on that device. I have changed it
to avoid diverting through the VOP system and to call the only possible
target directly, saving a little bit of time and some complexity.
In all, nothing much changes, except some scaffolding to support the
roundabout way of calling swstrategy() is gone.
Matt gave me the ok to do this some time ago, and I apologize for taking
so long to get around to it.
code. You can now build the newcard's pcic driver as a module for all
the joy that will bring you, which currently isn't so much joy as it
is pain.
The old pccard module will never be made to work again, so I think
this is OK. Note, it still remains disabled in sys/modules/Makefile
on purpose.
Don't use NFDC as an arbitary limit, it is not required and goes against
using PnP fdc devices (eg: when PNPBIOS is turned on, the motherboard
devices (sio, fdc, etc etc) are detected via PnP, not config(8).)
o Rewrite probe code to work in the newbus world.
o Add preliminary pnp support. I have no clue what the pnp ids for
the older ISA machines/cards. I don't have any of these cards/machines
so I'll have to rely on the user community to give me help.
o Minor code reformatting.
Attach hasn't been touched, and there may be some config issues that
we need to deal with as well. These will follow in time.
Cleaning up the code:
- Declare many functions static
- Change variable names to make them more self explanatory
- Change usbd_request_handle -> usbd_xfer_handle
- Syntactical changes
- Remove some unused code
- Other KNF changes
Interrupt context handling
- Change delay to usbd_delay_ms were possible (takes polling mode into
account)
- Change detection mechanism for interrupt context
Add support for pre-allocation DMA-able memory by device driver
Add preliminary support for isochronous to the UHCI driver (not for OHCI
yet).
usb.c, uhci.c, ohci.c
- Initial attempt at detachable USB host controllers
- Handle the use_polling flag with a lttle more care and only set it if
we are cold booting.
usb.c, uhci.c ohci.c, usbdi.c usbdi_util.c usb_subr.c
- Make sure an aborted pipe is marked as not running.
- Start queued request in the right order.
- Insert some more DIAGNOSTIC sanity checks.
- Remove (almost) unused definitions USBD_XFER_OUT and USBD_XFER_IN.
usb.c, usb_subr.c
- Add an event mechanism so that a userland process can watch devices
come and go.
ohci.c
- Handle the case when a USB transfer is so long that it crosses two
page (4K) boundaries. OHCI cannot do that with a single TD so we make
a chain.
ulpt.c
- Use a bigger buffer when transferring data.
- Pre-allocate the DMA buffer. This makes the driver slightly more
efficient.
- Comment out the GET_DEVICE_ID code, because for some unknown reason it
causes printing to fail sometimes.
usb.h
- Add a macro to extract the isoc type.
- Add a macro to check whether the routine has been entered after splusb
and if not, complain.
usbdi.c
- Fix a glitch in dequeueing and aborting requests on interrupt pipes.
- Add a flag in the request to determine if the data copying is done by
the driver or the usbdi layer.
This fixes some nasty procfs problems for SMP, makes ps(1) run much faster,
and makes ps(1) even less dependent on /proc which will aid chroot and
jails alike.
To disable this facility and revert to previous behaviour:
sysctl -w kern.ps_arg_cache_limit=0
For full details see the current@FreeBSD.org mail-archives.
Alot of the code in sys/kern directly accesses the *Q_HEAD and *Q_ENTRY
structures for list operations. This patch makes all list operations
in sys/kern use the queue(3) macros, rather than directly accessing the
*Q_{HEAD,ENTRY} structures.
Reviewed by: phk
Submitted by: Jake Burkholder <jake@checker.org>
PR: 14914
registering their interrupts with rman as though they were going through
the ISA pic. This prevents a conflict between isa & pci for irqs on such
machines.
Also hookup the chipset struct before calling platform.pci_intr_init().
This allows me to call inw/outw down in the platform code.
Add interrupt printfs to match the CIA chipset.
Reviewed by: dfr
Tested by: wilko
Alot of the code in sys/kern directly accesses the *Q_HEAD and *Q_ENTRY
structures for list operations. This patch makes all list operations
in sys/kern use the queue(3) macros, rather than directly accessing the
*Q_{HEAD,ENTRY} structures.
This batch of changes compile to the same object files.
Reviewed by: phk
Submitted by: Jake Burkholder <jake@checker.org>
PR: 14914
