to creating the tags file using ctags(1). Defaults to "gtags".
Made GTAGSFLAGS and HTAGSFLAGS overrideable, added CTAGSFLAGS.
Folded bsd.prog.mk version of `tags' into bsd.dep.mk.
PR: bin/42852
Fix the "@gprel relocation against dynamic symbol xxx" linker error.
Variables defined in the link unit and small enough to be put in the
short data section will have a gp-relative access sequence (using the
@gprel relocation). It is invalid to have @gprel relocations in shared
libraries, because they are to be resolved by the static linker and
not the dynamic linker. The -fpic option will cause @ltoff relocations
for @gprel relocations, but the side-effects are untested (if any).
Instead, disable/eliminate the short data section to achieve the same.
In "nroff" mode, italic font renders as an underlined text, which
makes it indistinguishable from the bold text on color monitors
(cons25 terminal type), yet it requires the less(1)'s -R option.
(Refer to the new grotty(1) manpage for details.)
So turn off the color support for now (when generating catpages),
until we figure out what do we do with this new feature. I have
a patch for grotty(1) that tells it to use the "reverse video"
attribute to render the italic font. Once this is accepted, we
can turn color support back on (if there won't be any objections
from the community).
This reduces the size of GENERIC's text space by 73999 bytes (about 2%).
The bloat is from approximately 3437 strings longer than 31 characters
being padded to a 32-byte boundary.
o Make it possible to prevent parts of the tree from being linted
(say) during a 'make world' by setting NOLINT in a leaf Makefile.
o Make "make lint" work (better) for executable programs.
o Clean up (nuke!) a syntax damaged pipeline.
lowest value in order to get the right MACHINE_CPU values since setting
CPUTYPE can result in problems later in the buildkernel case. Instead,
set MACHINE_CPU directly and leave CPUTYPE alone.
Tested by: mbr
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
ev6 or pca56 etc this downgrades the cpu specification passed to gas.
As a result, gas will fail when gcc generates media instructions (in
uipc_usrreq.c). This only affects what gas will accept, not what gcc
generates or what our *.s file contain.
TARGET_ARCH and TARGET. This is problematic when one has the =
(unconditional) type of assigment for CPUTYPE in /etc/make.conf.
(This would override what was set on the command line to "make
buildworld".)
Add a (horrible) kludge to Makefile.inc1 to check the type of
assignment for CPUTYPE (only for those who attempts to set it to
a different value). Fix an example make.conf. Fix the kernel's
build-tools target (aicasm only at the moment) to catch up with
bsd.cpu.mk,v 1.15 (BOOTSTRAPPING replaced with NO_CPU_CFLAGS in
Makefile.inc1's BMAKE).
Reviewed by: jhb
bsd.cpu.mk doesn't have to worry about compilers other than the current
version.
- Allow TARGET_CPUTYPE to override CPUTYPE in bsd.cpu.mk.
- Treat an empty CPUTYPE the same as an undefined CPUTYPE.
- For buildworld, buildkernel, etc., define TARGET_CPUTYPE to CPUTYPE for
native builds and define it to be empty for cross-builds.
TARGET_CPUTYPE is only defined if it is not already defined via the
commandline or environment.
- To minimize whitespace changes, remove a test that didn't define
_CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined
since it is redundant (we don't use _CPUCFLAGS if those are defined).
to tune for more advanced processors while still supporting the minimum
processor in an architecture. We can do this with the '-mtune=' option
to gcc for alpha, sparc64, and powerpc and with the mis-named '-mcpu='
option for i386.
This defaults to tuning i386 builds for i686 machines though not using
any instructions that aren't found on an 80386. For alpha it defaults
to tuning for an EV5.
Approved by: peter
Peril sensitive sunglasses borrowed from: peter
to make it call `install' in the bsd.subdir.mk-driven makefiles
too. (share/examples/Makefile,v 1.29 changed the bsd.prog.mk
to bsd.subdir.mk and many stuff was lost during "make release".
I then merged this change in rev. 1.28.2.2 to work around the
namespace pollution (FILES) in this makefile.)
There was an added complexity here. Both the `distribute' and
`install' targets are recursive (they propagate to SUBDIRs).
So `distribute' first calls `install' in the ${.CURDIR}, then
calls `distribute' in each SUBDIR, etc. The problem is that
`install' (being also recursive) causes the stuff from SUBDIR
to be installed twice, first time thru `install' in ${.CURDIR}
triggered by `distribute', second time by `distribute' run in
the SUBDIR. This problem is not new, but it became apparent
only after I moved the `distribute' target from bsd.obj.mk to
bsd.subdir.mk. My first attempt testing the fix failed due to
this, because the whole world was distributed twice, causing
all the imaginable mess (kerberos5 stuff was installed into both
"base" and "krb5" dists, there was /sbin/init.bak, etc.)
I say the problem is not new because bsd.prog.mk and bsd.lib.mk
makefiles with SUBDIR (even without this fix) had this problem
for years. Try e.g. running ``make distribute DISTDIR=/foo''
from usr.bin/bzip2 or from lib/libcom_err (without the fix) and
watch the output.
So the solution was to make `install' behave non-recursive when
executed by `distribute'. My first attempt in passing SUBDIR=
to the `install' in the `distribute' body failed because of the
way how src/Makefile and src/Makefile.inc1 communicate with each
other. SUBDIR='s assignment precedence on the "make install
SUBDIR=" command line is lowered after src/Makefile wrapper calls
"make ... -f ${.CURDIR}/Makefile.inc1 install" because SUBDIR=
is moved into environment, and Makefile.inc1's assignments now
take higher precedence. This may be fixed someday when we merge
Makefile with Makefile.inc1. For now, this is implemented as a
NO_SUBDIR knob.
Spotted by: Dmitry Pryanishnikov <dmitry@atlantis.dp.ua>
Prodded by: des
MFC after: 3 days
directives to ensure that all realinstall sub-tasks are executed
after beforeinstall, similarly ensure that all afterinstall sub-
tasks are executed after realinstall. Demonstration:
all: task1 task2
.ORDER: task1 task2
task2: task2_subtask
.ORDER: task1 task2_subtask
task1 task2 task2_subtask:
@sleep `jot -r 1 0 1.0`
@echo ${.TARGET}
Without the second .ORDER directive, task2_subtask can be run in
parallel with task1.
Spotted by: Andrea Campi <andrea@webcom.it>
Provided the (previously missing) dependency on source files
for intermediate .msg files.
Provided the default for NLSSRCDIR (defaults to .CURDIR).
Slightly changed the API: NLS should now list plain locale
names, without the .msg suffix.
When included from bsd.prog.mk, NLSNAME defaults to PROG.
and afterinstall targets. Make sure they are run in sequence in the
-j case.
This fixes the recent breakage with beforeinstall being run _after_
realinstall.
Reported by: knu
same set of features as in recently added bsd.incs.mk
(FILESGROUPS, accessibility from both bsd.prog.mk and
bsd.lib.mk, de-pessimized typical installation path,
etc.) New standard targets: buildfiles, installfiles,
and files (buildfiles + installfiles).
back to -fformat-extensions (or whatever) when we have the functionality.
We are gaining warnings again that should be fixed but the are being hidden
by NO_WERROR and all the -Wformat noise.
Rename `incsinstall' to `installincludes'.
Make `includes' a -j safe shortcut for `buildincludes' + `installincludes'.
`buildincludes' and `installincludes' are SUBDIR friendly, if run directly.
