This is for the not-quite-ready signal/fpu abi stuff. It may not see
the light of day, but I'm certainly not going to be able to validate it
when getting shot in the foot due to syscall number conflicts.
execve_secure() system call, which permits a process to pass in a label
for a label change during exec. This permits SELinux to change the
label for the resulting exec without a race following a manual label
change on the process. Because this interface uses our general purpose
MAC label abstraction, we call it execve_mac(), and wrap our port of
SELinux's execve_secure() around it with appropriate sid mappings.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
The primary reason for this is to allow MD code to process machine
specific attributes, segments or sections in the ELF file and
update machine specific state accordingly. An immediate use of this
is in the ia64 port where unwind information is updated to allow
debugging and tracing in/across modules. Note that this commit
does not add the functionality to the ia64 port. See revision 1.9
of ia64/ia64/elf_machdep.c.
Validated on: alpha, i386, ia64
ACL configuration changes, this shouldn't result in different code paths
for file systems not explicitly configured for ACLs by the system
administrator. For UFS1, administrators must still recompile their
kernel to add support for extended attributes; for UFS2, it's sufficient
to enable ACLs using tunefs or at mount-time (tunefs preferred for
reliability reasons). UFS2, for a variety of reasons, including
performance and reliability, is the preferred file system for use with
ACLs.
Approved by: re
2. Update a comment. We now restore much more than RTC updates and
interrupts.
3. Order change. Stop interrupts by writing to RTC_STATUSB,
restore rate bits for the interrupts by writing to RTC_STATUSA,
then enable interrupts again.
This seems to be done perfectly backwards in startrtclock().
Otherwise, the idea for this change was obtained from
startrtclock().
4. Don't stop the clock (RTCB_HALT). We only program some control bits
and don't want to stop the clock.
5. (Not really related.) Add caveats to the comment about timer_restore().
The update is non-atomic since locking is not done.
On locking:
6. rtcin() and writertc() are locked() adequately by splhigh() in RELENG_4,
but this locking is null in -current.
7. Doing things in the correct order in (3) combined with (6) is probably
enough locking for rtcrestore() in RELENG_4. In -current, the
writertc()'s race with rtcintr() unless the BIOS disables RTC interrupts.
Submitted by: bde (including commit message)
MFC after: 1 week
This is most beneficial for vmware client os installs.
Reviewed by: jmallet, iedowse, tlambert2@mindspring.com
MFC After: never, -STABLE does not currently use this instruction
- Begin moving scheduler specific functionality into sched_4bsd.c
- Replace direct manipulation of scheduler data with hooks provided by the
new api.
- Remove KSE specific state modifications and single runq assumptions from
kern_switch.c
Reviewed by: -arch
that add an instance of themselves. The npx(4) driver doesn't even check
the npx 'port' hint but hardcodes IO_NPX instead. The npx(4) driver also
will use isa IRQ 13 (on x86, 8 on pc98) by default if no 'irq' hint is
specified, so we don't need that hint either.
in specific situations. The owner thread must be blocked, and the
borrower can not proceed back to user space with the borrowed KSE.
The borrower will return the KSE on the next context switch where
teh owner wants it back. This removes a lot of possible
race conditions and deadlocks. It is consceivable that the
borrower should inherit the priority of the owner too.
that's another discussion and would be simple to do.
Also, as part of this, the "preallocatd spare thread" is attached to the
thread doing a syscall rather than the KSE. This removes the need to lock
the scheduler when we want to access it, as it's now "at hand".
DDB now shows a lot mor info for threaded proceses though it may need
some optimisation to squeeze it all back into 80 chars again.
(possible JKH project)
Upcalls are now "bound" threads, but "KSE Lending" now means that
other completing syscalls can be completed using that KSE before the upcall
finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is
one of the highest priorities in the KSE system.) The upcall when it happens
will present all the completed syscalls to the KSE for selection.
there are some strange machines that seem to need this.
o delete bogus comment.
o don't use the the bios for read/writing config space. They interact badly
with SMP and being called from ISR. This brings -current in line with
-stable.
# make the latter #ifdef on USE_PCI_BIOS_FOR_READ_WRITE in case we
# need to go back in a hurry.
NB: But it will enable it in all kernels not having options "NO_GEOM"
Put the GEOM related options into the intended order.
Add "options NO_GEOM" to all kernel configs apart from NOTES.
In some order of controlled fashion, the NO_GEOM options will be
removed, architecture by architecture in the coming days.
There are currently three known issues which may force people to
need the NO_GEOM option:
boot0cfg/fdisk:
Tries to update the MBR while it is being used to control
slices. GEOM does not allow this as a direct operation.
SCSI floppy drives:
Appearantly the scsi-da driver return "EBUSY" if no media
is inserted. This is wrong, it should return ENXIO.
PC98:
It is unclear if GEOM correctly recognizes all variants of
PC98 disklabels. (Help Wanted! I have neither docs nor HW)
These issues are all being worked.
Sponsored by: DARPA & NAI Labs.
This will be removed when new versions of syscalls sigreturn()
and sigaction() are added (mini is working on this but is in
the middle of a move).
This should fix the problem of cvsupd dying.
These are still unknown name but these are working as well
as the other ServerWorks chipset.
Description strings should be corrected when the chipsets
are known.
MFC after: 1 week
doesn't give them enough stack to do much before blowing away the pcb.
This adds MI and MD code to allow the allocation of an alternate kstack
who's size can be speficied when calling kthread_create. Passing the
value 0 prevents the alternate kstack from being created. Note that the
ia64 MD code is missing for now, and PowerPC was only partially written
due to the pmap.c being incomplete there.
Though this patch does not modify anything to make use of the alternate
kstack, acpi and usb are good candidates.
Reviewed by: jake, peter, jhb
of 1 so that it is not probed until after acpi0 is probed and attached.
- In legacy_probe(), return ENXIO if acpi0 is around and alive.
- nexus_attach() is now much simpler and just lets its child drivers do
all the work.
