fixes filesystem corruption when nextboot.conf is located after
cylinder 1023. The bug appears to have been introduced at the time
bd_read was copied to create bd_write.
PR: bin/98005
Reported by: yar
MFC after: 1 week
selection and not always beeping on startup. The two bytes for the extra
'jmp' instruction were obtained by removing recognition of BSD/OS
partitions.
Requested by: many
Tested by: subset of many
Head nod: imp, keramida
MFC after: 2 weeks
Make this compile, assuming that you have linux installed in a
sensible place. tag_list is disabled by default, since we don't
distribute linux, but it is desirable to allow the boot loader to boot
Linux or FreeBSD (mostly for testing).
xmodem download. Then download the image you want in the flash.
This will burn the image into the flash. You must then reset the
unit and the new flash image will be used for booting...
xmodem download. Then download the image you want in the eeprom.
This will burn the image into the eeprom. You must then reset the
unit and the new eeprom image will be used for booting...
o Use a directory layout that is more akin to the i386 boot layout.
o Create a libat91 for library routines that are used by one or more
of the boot loaders.
o Create bootiic for booting from an iic part.
o Create bootspi for booting from an spi part.
o Optimize the size of many of these routines (especially emac.c). Except
for the emac.c optimizations, all these have been tested.
o eliminate the inc directory, libat91 superceeds it.
o Move linker.cfg up a layer to allow it to be shared.
For 32-bit SDRAM systems, enable D16 to D31 in the PIO controller.
Otherwise they read back as 0xffff.
Shave 8 bytes from the object size by using AT91C_BASE_PIOA directly
and by not assigning PIO_BSR to 0 in the DBGU init. That's a nop in
two ways (everything defaults to peripheral A, and writing 0 changes
nothing).
Many places used #define FOO ((unsigned int) 0x23) where a simpler
#define FOO 0x23u would have sufficed. This practice is overly
verbose and has the disadvantage that you can't say
#if FOO == BAR
#endif
because the extra "unsigned int" tokens choke cpp's little brain.
Migrate to the latter style to allow use in preprocessor statements.
The two are the same semantically anyway in a C context (at least for
the uses they are put to presently, C gurus can explain to me how they
differ).
via xmodem to the DBGU port when the AT91 comes up in recovery mode.
The recovery loader will then load your program via xmodem into SDRAM
at 1MB which can do its things. It needs to be tweaked to the
specific board one is using, but it fits in < 1kB (all of Atmel's ARM
products have at least 8kb of SRAM that I can tell, so this should
work for them all).
Parts of this code were provided by Kwikbyte with copyright
specifically disclaimed. I heavily modified it to act as a recovery
loader (before it was a bootstrap loader) and to optimize for size
(before I started the size was closer to 8k).
Bootstrap loaders for SPI and IIC to follow.
Otherwise, we could match on a filename that had the wrong last character
(such as /boot/loaded instead of /boot/loader).
PR: kern/95625
Submitted by: Oliver Fromme <olli@secnetix.de>
MFC after: 1 month
controller to get ready (65K x ISA access time, visually around 1 second).
If we have wait more than that amount it's likely that the hardware is a
legacy-free one and simply doesn't have keyboard controller and doesn't
require enabling A20 at all.
This makes cdboot working for MacBook Pro with Boot Camp.
MFC after: 1 day
Use 'BOOT_SENSITIVE_INFO=YES' variable to turn them on.
- Use 'uint*_t' instead of 'u_int*_t', correct compilation warnings, and
update copyright while I am here.
when checking whether it's greater than a struct stat st_size in order
to also catch the case when st_size is -1. Previously this check didn't
trigger on sparc64 when st_size is -1 (as it's the case for a file on
a bzipfs, TFTP server etc.), causing the content of the linker hints
file to be copied to memory referenced by a null-pointer.
PR: 91231
MFC after: 1 week
3MB of physical memory for heap instead of range between 1MB and 4MB.
This makes this feature working with PAE and amd64 kernels, which are
loaded at 2MB. Teach i386_copyin() to avoid using range allocated by
heap in such case, so that it won't trash heap in the low memory
conditions.
This should make loading bzip2-compressed kernels/modules/mfs images
generally useable, so that re@ team is welcome to evaluate merits
of using this feature in the installation CDs.
Valuable suggestions by: jhb
provide enough room for decompression (up to 2.5MB is necessary). This
should be safe to do since we load i386 kernels after 8MB mark now, so
that 16MB is the minimum amount of RAM necessary to even boot FreeBSD.
This makes bzip2-support practically useable.
memory directly available to loader(8) and friends was limited to 640K on i386.
Those times have passed long time ago and now loader(8) can directly access
up to 4GB of RAM at least theoretically. At the same time, there are several
places where it's assumed that malloc() will only allocate memory within
first megabyte.
Remove that assumption by allocating appropriate bounce buffers for BIOS
calls on stack where necessary.
This allows using memory above first megabyte for heap if necessary.
means:
o Remove Elf64_Quarter,
o Redefine Elf64_Half to be 16-bit,
o Redefine Elf64_Word to be 32-bit,
o Add Elf64_Xword and Elf64_Sxword for 64-bit entities,
o Use Elf_Size in MI code to abstract the difference between
Elf32_Word and Elf64_Word.
o Add Elf_Ssize as the signed counterpart of Elf_Size.
MFC after: 2 weeks
devices can be opened multiple times simultaneously but we're
expected to be able to do so by the rest of the loader.
This fixes booting from disks attached to the on-board SCSI
controller of Sun Ultra 1 (previously this triggered a trap)
and probably also of AX1115 boards.
- While here, remove unused variables and add empty lines where
style(9) requires such.
Tested on: powerpc (grehan), sparc64
MFC after: 1 month
> Cause all flags passed by boot2 to set the respective loader(8)
> boot_* variable. The end effect is that all flags from boot2
> are now passed to the kernel.
the serial console speed (i386 and amd64 only). If the previous
stage boot loader requested a serial console (RB_SERIAL or RB_MULTIPLE)
then the default speed is determined from the current serial port
speed. Otherwise it is set to 9600 or the value of BOOT_COMCONSOLE_SPEED
at compile time.
This makes it possible to set the serial port speed once in
/boot.config and the setting will propagate to boot2, loader and
the kernel serial console.
/boot.config or on the "boot:" prompt line via a "-S<speed>" flag,
e.g. "-h -S19200". This adds about 50 bytes to the size of boot2
and required a few other small changes to limit the size impact.
This changes only affects boot2; there are further loader changes
to follow.
which serial device to use in that case respectively to not rely on
the OFW names of the input/output and stdin/stdout devices. Instead
check whether input and output refers to the same device and is of
type serial (uart(4) was already doing this) and for the fallback
to a serial console in case a keyboard is the selected input device
but unplugged do the same for stdin and stdout in case the input
device is nonexistent (PS/2 and USB keyboards) or has a 'keyboard'
property (RS232 keyboards). Additionally also check whether the OFW
did a fallback to a serial console in the same way in case the
output device is nonexistent. While at it save on some variables
and for sys/boot/sparc64/loader/metadata.c move the code in question
to a new function md_bootserial() so it can be kept in sync with
uart_cpu_getdev_console() more easily.
This fixes selecting a serial console and the appropriate device
when using a device path for the 'input-device' and 'output-device'
OFW environment variables instead of an alias for the serial device
to use or when using a screen alias that additionally denotes a
video mode (like e.g. 'screen:r1024x768x60') but no keyboard is
plugged in (amongst others). It also makes the code select a serial
console in case the OFW did the same due to a misconfiguration like
both 'input-device' and 'output-device' set to 'keyboard' or to a
nonexisting device (whether the OFW does a fallback to a serial
console in case of a misconfiguration or one ends up with just no
console at all highly depends on the OBP version however).
- Reduce the size of buffers that only ever need to hold the string
'serial' accordingly. Double the size of buffers that may need to
hold a device path as e.g. '/pci@8,700000/ebus@5/serial@1,400000:a'
exceeds 32 chars.
- Remove the package handle of the '/options' node from the argument
list of uart_cpu_getdev_dbgport() as it's unused there and future
use is also unlikely.
MFC after: 1 week
from OpenFirmware be 16 pages to avoid fragmentation in the list
of mappings returned when the kernel requests it in pmap_bootstrap.
This allows a static buffer to be used when obtaining the existing
mappings - very useful on the G5 when random physical pages can't
be grabbed because they can't be BAT-mapped.
MFC after: 3 days
variables to loader:
hint.smbios.0.enabled "YES" when SMBIOS is detected
hint.smbios.0.bios.vendor BIOS vendor
hint.smbios.0.bios.version BIOS version
hint.smbios.0.bios.reldate BIOS release date
hint.smbios.0.system.maker System manufacturer
hint.smbios.0.system.product System product name
hint.smbios.0.system.version System version number
hint.smbios.0.planar.maker Base board manufacturer
hint.smbios.0.planar.product Base board product name
hint.smbios.0.planar.version Base board version number
hint.smbios.0.chassis.maker Enclosure manufacturer
hint.smbios.0.chassis.version Enclosure version
These strings can be used to detect hardware quirks and to set appropriate
flags. For example, Compaq R3000 series and some HP laptops require
hint.atkbd.0.flags="0x9"
to boot. See amd64/67745 for more detail.
Note: Please do not abuse this feature to resolve general problem when it
can be fixed programmatically. This must be used as a last resort.
PR: kern/81449
Approved by: anholt (mentor)
and visible effect of the bug what that autoboot would boot a kernel
after only a couple of seconds had passed instead of waiting the
full 10 seconds it's supposed to wait by default.
Add my copyright notice, since one was missing and I reimplemented
the one and only function in this file.
MFC after: 1 week
- Teach the i386 and pc98 loaders to honor multiple console requests from
their respective boot2 binaries so that the same console(s) are used in
both boot2 and the loader.
- Since the kernel doesn't support multiple consoles, whichever console is
listed first is treated as the "primary" console and is passed to the
kernel in the boot_howto flags.
PR: kern/66425
Submitted by: Gavin Atkinson gavin at ury dot york dot ac dot uk
MFC after: 1 week
be assumed that modules are contiguous in memory (they're not)
so don't blindly __syncicache start/end. In fact, don't bother
syncing the icache for modules since the kernel will do it after
fixing up relocations.
This fixes the trap when loading modules at boot time.
Reported by: orlando at break dot net
user to interrupt autoboot process at all. Currently, even when
`autoboot_delay' is set to 0, loader(8) still allows autoboot process to be
interrupted by pressing any key on the console when the loader reads kernel
and modules from the disk. In some cases (i.e. untrusted environment) such
behaviour is highly indesirable and user should not be allowed to interfere
with the autoboot process at all.
Sponsored by: PBXpress Inc.
MFC after: 3 days
copying, rather than a page at a time. This was creating far
too many single-page mappings, and eventually OFW overflowed
some internal data structure and refused to map any more.
The new algorithm creates far less mappings and fixed a bug
where multiple mappings for the same page would be created.
'Twas known this was a problem, but only became urgent when the
install CD's mfs_root grew large enough to cause the overflow.
- Move MD files into <arch>/<arch>.
- Move bus dependent files into <arch>/<bus>.
Rename some files to more suitable names.
Repo-copied by: peter
Discussed with: imp
I think all we really need is -fno-sse2.
I really don't like cluttering up the compiler invocation,
but this bigger hammer will fix reported problems for now.
to stll be able to mount NFS root as prescribed by DCHP configuration. Since
pxeboot is using TFTP to get to the files, pxeboot can not rely on NFS to
provide it a root directory hande as a side effect. pxeboot has to make RPC
mount call itself.
place.
This moves the dependency on GCC's and other compiler's features into
the central sys/cdefs.h file, while the individual source files can
then refer to #ifdef __COMPILER_FEATURE_FOO where they by now used to
refer to #if __GNUC__ > 3.1415 && __BARC__ <= 42.
By now, GCC and ICC (the Intel compiler) have been actively tested on
IA32 platforms by netchild. Extension to other compilers is supposed
to be possible, of course.
Submitted by: netchild
Reviewed by: various developers on arch@, some time ago
they would leave enough elements on the stack that if you escaped to the
loader prompt and then typed 'setenv', it would pull in all of the leaked
junk and cause an exception in the environment. There still seems to be
3 leaked elements, but they don't appear to be coming from this file.
changing the Makefile, fail the creation of loader.efi when there are
unresolved symbols in loader.sym. This avoids silently creating a
faulty EFI binary.
and assume that the BIOS has set it up for us. This allows folks with a
serial-aware BIOS to set the BIOS to speeds above 9600 and allow boot0 to
just use the existing settings.
- Purge some gratuitous cpp comments as per style(9).
Submitted by: Danny Braniss danny at cs dot huji dot ac dot il (1)
MFC after: 1 month
assembler to cpp(1) comment conversions. This allows btx to compile again
when BTX_SERIAL is defined.
Reported by: Danny Braniss danny at cs dot huji dot ac dot il
MFC after: 1 month
