Commit Graph

10 Commits

Author SHA1 Message Date
Rui Paulo
4135f5cf7d Make ata_getrev() an optional method by implementing ata_null_getrev().
This fixes a bogus '???' boot message on Cambria boards with a CompactFlash
card.

Reviewed by:	mav
2010-01-20 14:29:55 +00:00
Alexander Motin
066f913a94 MFp4:
Introduce ATA_CAM kernel option, turning ata(4) controller drivers into
cam(4) interface modules. When enabled, this options deprecates all ata(4)
peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers
(ada, cd, ...) and interfaces to be natively used instead.

As side effect of this, ata(4) mode setting code was completely rewritten
to make controller API more strict and permit above change. While doing
this, SATA revision was separated from PATA mode. It allows DMA-incapable
SATA devices to operate and makes hw.ata.atapi_dma tunable work again.

Also allow ata(4) controller drivers (except some specific or broken ones)
to handle larger data transfers. Previous constraint of 64K was artificial
and is not really required by PCI ATA BM specification or hardware.

Submitted by:	nwitehorn (powerpc part)
2009-12-06 00:10:13 +00:00
Søren Schmidt
9f82379c24 Add experimental support for SATA Port Multipliers
Support is working on the Silicon Image SiI3124/3132.
Support is working on some AHCI chips but far from all.

Remember this is WIP, so test reports and (constructive) suggestions are welcome!
2008-04-10 13:05:05 +00:00
Søren Schmidt
16194fc40b Add support for 64bit addressing to AHCI and Marvell controllers.
Munged into ATA shape and Marvell specifics my yours truely.

Submitted by: jhb
2007-04-06 16:18:59 +00:00
Søren Schmidt
e2bf77c5c2 Get rid of the advertising clause in the copyright. 2006-01-05 21:27:19 +00:00
Søren Schmidt
0068f98f88 Take newbusification one step further, ie use the device_t more consequently
all way through the code down the layers, instead of the mix'n'match that
resulted from the conversion done earlier.

Sponsored by:	pair.com
2005-04-30 16:22:07 +00:00
Søren Schmidt
ca8c70e9e3 Provide a default setmode method.
This shaves off multiple copies of the same setmode stub.
2005-04-28 22:15:44 +00:00
Søren Schmidt
8dad6b7be5 Rearrange the way the reset code is called.
Prepare for different looking controllers.
2005-04-28 22:08:08 +00:00
Søren Schmidt
5a5b148dd8 Change the ata_* methods to use a channel device instead of a
controller device. This helps when there is no controller parent
to a channel (PPC port).
2005-03-31 15:05:40 +00:00
Søren Schmidt
d9e96e03ee Whoops, this got left out from the megacommit 2005-03-30 12:27:34 +00:00