Commit Graph

5448 Commits

Author SHA1 Message Date
Jordan K. Hubbard
65cf764910 Make Makefile take a relative path for CFLAGS.
Submitted by:	Remy Card <Remy.Card@masi.ibp.fr>
1995-01-17 15:07:13 +00:00
Jordan K. Hubbard
5238dbaecc Here's a patch to gdb-4.13 to add dyadic frames, as per J"org Wunsch.
Could somebody apply it?
Submitted by:	gj
1995-01-17 13:52:39 +00:00
Bruce Evans
d25a46b215 Add option `-x excludelist'. This will be used for removing variously
spelled g*compiled* symbols from the kernel so that ddb doesn't have to
do it.  The symbols are currently removed by dbsym but dbsym will go
away when symbols are loaded by the boot loader.

Document -m option in usage message.

Check for overrunning some arrays.

Fix some misformatting.
1995-01-17 07:20:26 +00:00
Bruce Evans
f746e67c46 Obtained from: looked at the fix in 1.1.5 and rewrote it
Fix entabbing.
1995-01-17 07:02:31 +00:00
Bruce Evans
2d2fb1bf6b The %eflags checking introduced in the previous commit was too zealous.
sigreturn() sometimes failed for ordinary returns from signal handlers.
Failures of ordinary returns "can't happen" and are badly handled.
"Temporary" fix: allow users to corrupt PSL_RF.  This is fairly
harmless.  A correct fix would involve saving the old %eflags (and
perhaps the old segment registers) where the user can't get at them.
1995-01-17 01:15:12 +00:00
Andrey A. Chernov
0293a7a389 Remove troff chars emulation, handled better via tmac.tty-char 1995-01-17 01:08:03 +00:00
Andrey A. Chernov
c1328812d5 Back out 1.x changes (additional troff chars), now handled
via tmac.tty
1995-01-17 01:01:56 +00:00
Andrey A. Chernov
e9844b337b Define troff chars in more nice way than defining them into
devascii R.proto (will be fixed too)
1995-01-17 00:58:05 +00:00
Andrey A. Chernov
aab45466ff Move MANSRC defining rule (fix for obj subdir) to top level
Makefile.cfg, needed not only in man subdir
1995-01-17 00:42:27 +00:00
Andrey A. Chernov
f94052d6fc Add russian hyphentation rules 1995-01-17 00:35:51 +00:00
Andrey A. Chernov
9acd98f380 Add koi8-r referred to tmac.tty 1995-01-17 00:21:30 +00:00
Andrey A. Chernov
5b90fb0af3 Add koi8-r as valid -T option 1995-01-17 00:13:15 +00:00
Andrey A. Chernov
7ac7111d42 Add devkoi8-r to SUBDIR 1995-01-17 00:06:29 +00:00
Andrey A. Chernov
a7e36b1757 Add koi8-r device (russian charset) 1995-01-17 00:04:14 +00:00
Gary Palmer
2db2081438 Correct a small problem in that when there isn't a checksum for that
particular file, but there is a files/md5, it reports that it failed
the checksum
1995-01-16 23:33:08 +00:00
Andrey A. Chernov
7650ac4508 Fix install target when obj subdir present 1995-01-16 23:17:06 +00:00
Andrey A. Chernov
2875b41727 Don't call $(SHELL) for mdate.sh, call its directly.
Old method don't works, if login shell != sh && != bash
1995-01-16 23:02:07 +00:00
Andreas Schulz
eda3ffc7c2 Add the Adaptec 282x Series of controller to the supported controllers.
They seem to be detected and working ok from the aic driver.
1995-01-16 19:19:14 +00:00
Doug Rabson
c48edefb3c Change to use RTM_CHANGE when an arp entry already exists. This closes
problem bin/57 which was caused when an incomplete entry was present for the
host which was booting.
1995-01-16 18:57:45 +00:00
Andrey A. Chernov
23a4e9ded7 Add doc to SUBDIR 1995-01-16 17:56:20 +00:00
Andrey A. Chernov
98f978a585 Remove */doc 1995-01-16 17:53:43 +00:00
Andrey A. Chernov
9953d9b05d Add doc to SUBDIR 1995-01-16 17:49:20 +00:00
Andrey A. Chernov
8ab90258e8 Add doc to SUBDIR list 1995-01-16 17:40:57 +00:00
Andrey A. Chernov
eaa36bec77 Back out bkgd changes, now acts per braindamaged sysv standard 1995-01-16 17:33:33 +00:00
Joerg Wunsch
9088576b20 Could someone please add the following patch to
/usr/src/share/termcap/termcap.src? It defines the sequences emitted
by the PageUp, PageDown and Keypad-[79513] keys.

Submitted by:	Thomas Gellekum <thomas@ghpc8.ihf.rwth-aachen.de>
1995-01-16 17:29:29 +00:00
Andrey A. Chernov
1d8834adda Back out bkgd() function usage, it acts not from
common sense but from sysv standard
1995-01-16 17:22:35 +00:00
Andrey A. Chernov
603ef010b6 Back out my ascii->latin1 change, too many special chars
appearse after it (f.e. hyphentate and such) which looks
very different in different code pages
1995-01-16 17:18:03 +00:00
Joerg Wunsch
5c2c5abe6d Removed the comment about missing support for the original "High
Sierra" format from the bugs section.
1995-01-16 17:05:44 +00:00
Joerg Wunsch
988fa8efe3 Roll in my changes to make the cd9660 code understand the older
(original "High Sierra") CD format.  I've already implemented this for
1.1.5.1 (and posted to -hackers), but didn't get any response to it.
Perhaps i'm the only one who has such an old CD lying around...

Everything is done empirically, but i had three of them around (from
different vendors), so there's a high probability that i've got it
right. :)
1995-01-16 17:03:29 +00:00
Justin T. Gibbs
87cf6d44c7 Add $Ids. Use DMA for downloading SCBs to the sequencer. Implement SDTR,
WDTR, and message reject handlers so they don't need to exist in the
sequencer.  All three of these cases are not on the critical path, so it
makes little sense to use up precious sequencer ram for them.
1995-01-16 16:33:47 +00:00
Justin T. Gibbs
344e176820 Add $Id. Recognize motherboard aic7870 based controllers. 1995-01-16 16:31:57 +00:00
Justin T. Gibbs
f61afda9a4 Add $Id 1995-01-16 16:31:34 +00:00
Justin T. Gibbs
0d56403998 At $Ids to all files. Have the sequencer use DMA to tranfer its SCB
(SCSI control block) instead of having the host PIO it down.  Also
reimplement WDTR and SDTR optimization to remove code in the sequencer
and place the responsibility of knowing when to initiate SDTR or WDTR
on the kernel driver.  This vastly shortens the sequencer program yet
yeilds the same performance.
1995-01-16 16:31:21 +00:00
Jordan K. Hubbard
03b38adc65 Catch the one I missed. 1995-01-15 11:21:47 +00:00
David Greenman
761dd66739 Attempt to close a hole using splhigh/splx. There still appears to be a
serious one in the same area that I don't have time to fix.
1995-01-15 09:35:58 +00:00
Paul Traina
4f6d30a46a One last one... 1995-01-15 09:12:29 +00:00
Paul Traina
b5e6cd375f Last of the FreeBSD changes 1995-01-15 09:06:50 +00:00
David Greenman
7082ec8aa5 Fixed some page table reference count problems; these changes may not be
complete, but should be closer to correct than before.
1995-01-15 09:06:23 +00:00
Paul Traina
d94fc6a011 Layer in FreeBSD changes 1995-01-15 08:36:35 +00:00
Paul Traina
26444f9367 Layer in all FreeBSD patches 1995-01-15 08:30:25 +00:00
Paul Traina
f84f13d3d0 groff-1.09 1995-01-15 08:10:00 +00:00
David Greenman
edfab85b1a Moved some splx's down a few lines in vm_page_insert and vm_page_remove
to make the locking a bit more clear - this change is currently a NOP
as the calls to those routines are already at splhigh().
1995-01-15 07:31:34 +00:00
Jordan K. Hubbard
a3de1367e9 Submit srcdist changes 1995-01-15 06:31:50 +00:00
Andrey A. Chernov
9bc89504b8 Remove duplicated ec capability 1995-01-15 06:31:14 +00:00
Andrey A. Chernov
6451258bef Sync with base termcap.src 1995-01-15 06:29:22 +00:00
Andrey A. Chernov
bf8a2c7b91 Fix cv & ch to increment pos by one 1995-01-15 06:26:58 +00:00
Jordan K. Hubbard
42e77edcaf The Makefile contained in usr.bin/tconv contains a bogus
reference to the absolute path /usr/src/lib/libmytinfo.  The enclosed
patch fixes this.

Submitted by:	Remy Card <Remy.Card@masi.ibp.fr>
1995-01-15 06:19:01 +00:00
Jordan K. Hubbard
973e94c5d5 Make one last stab at making this work before I go. 1995-01-15 06:13:46 +00:00
Garrett Wollman
b60e6e6e9f Some fixes to device configuration, now that I've had a chance to do it
properly from the beginning:

	1) The `kern_devconf' struct should be a part of the driver's
	   `softc' structure (now it is).
	2) The `description' should say what the device actually is,
	   rather than just giving a model number (now it does).
	3) The device should be registered even if the probe fails, so
	   that it can be reconfigured later.
	4) For netifs, the device state should follow the IFF_UP flag.

Other network interfaces should follow this example.  (Please?)  Eventually
there should be a rundown routine doing the equivalent of setting IFF_UP
off, and perhaps more if warranted.
1995-01-15 00:18:17 +00:00
Garrett Wollman
0e10ef2ea0 Add a `-p' option, allowing the super-user to directly set a user's
encrypted password.  Kerberized `login' might use this, if I get around
to implementing the complete Allspice System behavior.
1995-01-14 23:14:25 +00:00