d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
158,000 Commits 6 Branches 133 Tags 2.6 GiB
522a3b5fbc
Commit Graph

7988 Commits

Author SHA1 Message Date
Alexander Motin
522a3b5fbc Change licenses of my manual pages to the recommended 2-clause form. 
Suggested by:	joel
 2010-09-15 07:10:39 +00:00
Alexander Motin
1adad4c374 Add eventtimers(7) man page, briefly describing event timers subsystem 
functionality and configuration options.
 2010-09-15 07:04:14 +00:00
Alexander Motin
d11087789e Add hpet(4) man page. 2010-09-15 04:51:07 +00:00
Weongyo Jeong
efe8958927 Fixes spellings and uses the better sentence. While I'm here bumps 
date.

Pointed by:	imp, Ruslan Mahmatkhanov <cvs-src at yandex dot ru>
 2010-09-14 23:27:06 +00:00
Kenneth D. Merry
2fff0b4f02 MFp4 (//depot/projects/mps/...) 
Add a man page for the mps(4) driver, and reference it in the
mpt(4) driver man page.

Sponsored by:	Spectra Logic Corporation
 2010-09-14 21:40:29 +00:00
Hiroki Sato
d3a8a8b9fa Split $ipv6_prefer into $ip6addrctl_policy and $ipv6_activate_all_interfaces. 
The $ip6addrctl_policy is a variable to choose a pre-defined address
selection policy set by ip6addrctl(8).
The keyword "ipv4_prefer" sets IPv4-preferred one described in Section 10.3,
the keyword "ipv6_prefer" sets IPv6-preferred one in Section 2.1 in RFC 3484,
respectively.  When "AUTO" is specified, it attempts to read
/etc/ip6addrctl.conf first.  If it is found, it reads and installs it as
a policy table.  If not, either of the two pre-defined policy tables is
chosen automatically according to $ipv6_activate_all_interfaces.

When $ipv6_activate_all_interfaces=NO, interfaces which have no corresponding
$ifconfig_IF_ipv6 is marked as IFDISABLED for security reason.

The default values are ip6addrctl_policy=AUTO and
ipv6_activate_all_interfaces=NO.

Discussed with:	ume and bz
 2010-09-13 19:55:40 +00:00
Hiroki Sato
abe3ac576a Add $ipv6_privacy to support net.inet6.ip6.use_tempaddr. Note that this 
will be replaced with a per-IF version later.

Based on:	changes in r206408 by dougb
 2010-09-13 19:52:46 +00:00
Hiroki Sato
c5ad71aff5 Revert changes in r206408. 
Discussed with:	dougb, core.5, and core.6
 2010-09-13 19:51:15 +00:00
Glen Barber
8d89b8f2a2 I believe the majority of Gregorian calendars would agree the current 
year is 2010, not 2005.

Approved by:	keramida (mentor)
Pointy hat to:	gjb
MFC after:	1 week
 2010-09-12 17:53:36 +00:00
Glen Barber
f3f9858578 Bump date from r212440. 
Approved by:	keramida (mentor)
MFC after:	1 week
 2010-09-12 14:04:54 +00:00
Weongyo Jeong
37e81ca522 Mentions cases when bwi(4) driver should be used that it only wrote 
about chipset type instead of card names because it's not easy to sort
names what cards use these chipsets.

Pointed by:	imp
 2010-09-11 21:49:28 +00:00
Rebecca Cran
5512804bb8 Revert changes of 'assure' to 'ensure' made in r211936. 
Approved by: rrs (mentor)
 2010-09-11 10:49:56 +00:00
David Xu
b9b58ffa26 Make a link for pthread_timedjoin_np. 2010-09-11 09:26:36 +00:00
David Xu
a60c2f1c0e kill() does queue signal now. 2010-09-11 08:15:18 +00:00
Glen Barber
9d839c44c1 Add RETURN VALUES section to devclass_get_maxunit(9). 
PR:		149979
Submitted by:	gcooper
Patch by:	gcooper
Approved by:	keramida (mentor)
MFC after:	1 week
 2010-09-10 23:22:01 +00:00
Matthew D Fleming
4d369413e1 Replace sbuf_overflowed() with sbuf_error(), which returns any error 
code associated with overflow or with the drain function.  While this
function is not expected to be used often, it produces more information
in the form of an errno that sbuf_overflowed() did.
 2010-09-10 16:42:16 +00:00
MIHIRA Sanpei Yoshiro
5696dee9f4 Add Planex UE-200TX-G to list of supported devices. 
(http://lists.freebsd.org/pipermail/freebsd-current/2008-December/001756.html)

Submitted by:	nork
MFC after:	3 days
 2010-09-10 11:01:11 +00:00
Christian Brueffer
f0a7fc8b30 Xref aesni(4). 2010-09-09 21:39:06 +00:00
Christian Brueffer
6728a0dfbb Some more grammar, wording and mdoc fixes. 2010-09-09 21:37:05 +00:00
Matthew D Fleming
4351ba272c Add drain functionality to sbufs. The drain is a function that is 
called when the sbuf internal buffer is filled.  For kernel sbufs with a
drain, the internal buffer will never be expanded.  For userland sbufs
with a drain, the internal buffer may still be expanded by
sbuf_[v]printf(3).

Sbufs now have three basic uses:
1) static string manipulation.  Overflow is marked.
2) dynamic string manipulation.  Overflow triggers string growth.
3) drained string manipulation.  Overflow triggers draining.

In all cases the manipulation is 'safe' in that overflow is detected and
managed.

Reviewed by:	phk (the previous version)
 2010-09-09 17:49:18 +00:00
Matthew D Fleming
db960cf00a Fix small errors in the sbuf(9) man page. 2010-09-09 16:27:02 +00:00
MIHIRA Sanpei Yoshiro
4c394c189f Add Buffalo (Melco Inc.) LUA3-U2-ATX to list of supported devices. 
Submitted by:	nork at FreeBSD.org
MFC after:	3 days
 2010-09-08 13:26:19 +00:00
Weongyo Jeong
50398e411f Adds LOADER TUNABLES section to mention knobs which could be controlled 
by loader(8) interface.
 2010-09-06 22:23:35 +00:00
Weongyo Jeong
5454c3c04e Adds a CAVEATS section to mention DMA issues that currently only 
a solution is using PIO mode.  As fas as I know all open source based
broadcom drivers for specially LP PHY has this issue because it's
a reverse engineered driver from wl(4).

Pointed by:	Warren Block <wblock at wonkity.com>
 2010-09-06 22:10:57 +00:00
Weongyo Jeong
d3e3be7fc7 Adds bwi(4) at SEE ALSO section because some old devices aren't 
supported by the bwn(4) firmware that as fas as I know the vendor
dropped its support.  Bumps date also.
 2010-09-06 22:02:08 +00:00
Konstantin Belousov
f5447a3079 Grammar fixes. 
Submitted by:	Ben Kaduk <minimarmot gmail com>, Valentin Nechaev
 2010-09-06 21:29:21 +00:00
Konstantin Belousov
edb78df075 Add aesni(4) manpage. 2010-09-06 20:35:48 +00:00
Glen Barber
d57429e2c2 Note in rc.conf(5) that jail_list should contain only alphanumeric 
characters.

PR:		150098
Submitted by:	cc (cpt_complain at yahoo dot com)
Approved by:	keramida (mentor)
MFC after:	1 week
 2010-09-05 20:04:54 +00:00
Alexander Motin
af82b9a9ee Add support for the Sharp/Micron flash chips to powermac_mvram(4). 
Tested on PowerMac G4 AGP.

Reviewed by:	nwhitehorn
 2010-09-05 20:04:02 +00:00
Konstantin Belousov
3037e5d20a Document "show cdev" command. 
MFC after:	3 days
 2010-09-05 14:52:27 +00:00
Konstantin Belousov
5e9cd1dbf8 Document MAKEDEV_ETERNAL. 
MFC after:	3 days
 2010-09-05 14:47:46 +00:00
Pyun YongHyeon
629cb67ffa Better wording. 
Submitted by:	jkim
 2010-09-02 20:43:01 +00:00
Pyun YongHyeon
f0092b8fc8 Document tunable dev.sis.%unit.manual_pad 
While I'm here Xref vlan(4) as sis(4) supports VLAN oversized
frames.
 2010-09-02 18:22:06 +00:00
Max Laier
36058c09e4 rmlock(9) two additions and one change/fix: 
- add rm_try_rlock().
 - add RM_SLEEPABLE to use sx(9) as the back-end lock in order to sleep while
   holding the write lock.
 - change rm_noreadtoken to a cpu bitmask to indicate which CPUs need to go
   through the lock/unlock in order to synchronize.  As a side effect, this
   also avoids IPI to CPUs without any readers during rm_wlock.

Discussed with:		ups@, rwatson@ on arch@
Sponsored by:		Isilon Systems, Inc.
 2010-09-01 19:50:03 +00:00
Maxim Konovalov
0090656231 o Sync the man page with the reality: nfs/ includes 
are under include/ and include/fs/.

PR:		docs/139153
Submitted by:	gjb
MFC after:	1 week
 2010-09-01 12:08:54 +00:00
Ed Schouten
2400afc155 Remove reference to device minor numbers in psm(4) man page. 
The number returned by stat(2) is generated automatically, so it is not
possible to deduce whether the device is blocking or not.

MFC after:	1 week
 2010-09-01 09:53:24 +00:00
Rebecca Cran
e7f8dd75b3 Fix incorrect usage of 'assure' and 'insure'. 
Approved by: rrs (mentor)
 2010-08-28 16:32:01 +00:00
Gabor Kovesdan
eb0c1bafd0 - Regen after adding WITH_BSD_GREP and removing WITH_GNU_GREP 2010-08-25 09:48:21 +00:00
Edward Tomasz Napierala
6b85cd6ddc s/ithread/interrupt thread/ 2010-08-24 21:38:44 +00:00
Warner Losh
25faff346c MFtbemd: 
Prefer MACHNE_CPUARCH to MACHINE_ARCH in most contexts where you want
to test of all the CPUs of a given family conform.
 2010-08-23 22:24:11 +00:00
Pyun YongHyeon
72cfc9a608 Better wording and fix wrong explanation. 
Submitted by:	Ben Kaduk ( minimarmot <> gmail dot com )
 2010-08-23 00:10:43 +00:00
Pyun YongHyeon
b817ddc741 Document tunable dev.rl.%unit.prefer_iomap 2010-08-22 21:32:48 +00:00
Ed Schouten
cd1c27af36 Add missing mlink for insmntque1(). 
MFC after:	1 week
 2010-08-22 16:42:46 +00:00
Pyun YongHyeon
8024e98228 Document newly introduced tunable dev.bge.%d.forced_udpcsum. 
While I'm here also mention tunable dev.bge.%d.forced_collapse.
 2010-08-22 01:40:59 +00:00
Joel Dahl
c913de0e06 Put parentheses around a few macros to prevent mdoc warnings. 2010-08-16 21:26:47 +00:00
Joel Dahl
c2025a7660 Fix typos, spelling, formatting and mdoc mistakes found by Nobuyuki while 
translating these manual pages.  Minor corrections by me.

Submitted by:	Nobuyuki Koganemaru <n-kogane@syd.odn.ne.jp>
 2010-08-16 15:18:30 +00:00
Joel Dahl
13852a6e15 Fix .Dd from last commit. 
Submitted by	Nobuyuki Koganemaru <n-kogane@syd.odn.ne.jp>
 2010-08-16 12:37:17 +00:00
Christian Brueffer
0f7e249192 Fixed a typo. 
PR:		148701
Submitted by:	Glen Barber <glen.j.barber@gmail.com>
MFC after:	1 week
 2010-08-15 21:37:30 +00:00
Christian Brueffer
cd64d3f2f0 Fixed a typo and added a comma. 
PR:		148681
Submitted by:	Glen Barber <glen.j.barber@gmail.com>
MFC after:	1 week
 2010-08-15 21:34:50 +00:00
Christian Brueffer
6a8d8aa193 Tie up some loose ends r88509 left behind: 
- chooseproc() is long gone, MLINK choosethread instead
- Update NAME section for choosethread
- Mark chooseproc.9 for removal

PR:             149549
Submitted by:   pluknet
MFC after:	1 week
 2010-08-15 21:25:52 +00:00