Commit Graph

2039 Commits

Author SHA1 Message Date
Tino Reichardt
bf5b42f9c8
Fix double declaration of getauxval() for FreeBSD PPC
The extern declaration is only for Linux, move this line
into the right #ifdef section.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Martin Matuska <mm@FreeBSD.org>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes 
Closes 
2022-09-26 10:32:22 -07:00
Brian Behlendorf
505df8d133 Dynamically size dbuf hash mutex array
Incorrectly sizing the array of hash locks used to protect the
dbuf hash table can lead to contention and reduce performance.
We could unconditionally allocate a larger array for the locks
but it's wasteful, particularly for a low-memory system.
Instead, dynamically allocate the array of locks and scale
it based on total system memory.

Additionally, add a new `dbuf_mutex_cache_shift` module option
which can be used to override the hash lock array size.  This is
disabled by default (dbuf_mutex_hash_shift=0) and can only be
set at module load time.  The minimum target array size is set
to 8192, this matches the current constant value.

Note that the count of the dbuf hash table and count of the
mutex array were added to the /proc/spl/kstat/zfs/dbufstats
kstat.

Finally, this change removes the _KERNEL conditional checks.
These were not required since for the user space build there
is no difference between the kmem and vmem interfaces.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
2022-09-22 12:59:56 -07:00
Brian Behlendorf
223b04d23d Revert "Reduce dbuf_find() lock contention"
This reverts commit 34dbc618f5.  While this
change resolved the lock contention observed for certain workloads, it
inadventantly reduced the maximum hash inserts/removes per second.  This
appears to be due to the slightly higher acquisition cost of a rwlock vs
a mutex.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
2022-09-22 12:59:41 -07:00
Mateusz Guzik
c629f0bf62
Retire ZFS_TEARDOWN_TRY_ENTER_READ
There were never any users and it so happens the operation is not even
supported by rrm locks -- the macros were wrong for Linux and FreeBSD
when not using it's RMS locks.
    
Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes 
2022-09-20 15:34:41 -07:00
Mateusz Guzik
402426c7d8
Add membar_sync
Provides the missing full barrier variant to the membar primitive set.

While not used right now, this is probably going to change down the
road.

Name taken from Solaris, to follow the existing routines.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Closes 
2022-09-20 15:32:44 -07:00
Richard Yao
3f400b0f58
FreeBSD: Cleanup zfs_readdir()
The FreeBSD project's coverity scans found dead code in `zfs_readdir()`.
Also, the comment above `zfs_readdir()` is out of date.

I fixed the comment and deleted all of the dead code, plus additional
dead code that was found upon review.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes 
2022-09-20 14:50:16 -07:00
Richard Yao
e8bdc74528
Cleanup: Remove unused uu_pname code
Coverity caught a possible NULL pointer dereference in dead code. We can
delete it all.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Chunwei Chen <david.chen@nutanix.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes 
2022-09-19 17:33:52 -07:00
Martin Matuška
042d43a1dd
FreeBSD: fix static module build broken in 7bb707ffa
param_set_arc_free_target(SYSCTL_HANDLER_ARGS) and
param_set_arc_no_grow_shift(SYSCTL_HANDLER_ARGS) defined in
sysctl_os.c must be made available to arc_os.c.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Martin Matuska <mm@FreeBSD.org>
Closes 
2022-09-19 17:21:45 -07:00
Tino Reichardt
48cf170d5a Add PPC cpu feature tests for FreeBSD and Linux
Add needed cpu feature tests for powerpc architecture.

Overview:
zfs_altivec_available() - needed by RAID-Z
zfs_vsx_available()     - needed by BLAKE3
zfs_isa207_available()  - needed by SHA2

Part 1 - Userspace
- use getauxval() for Linux and elf_aux_info() for FreeBSD
- direct including <sys/auxv.h> fails with double definitions
- so we self define the needed functions and definitions

Part 2 - Kernel space FreeBSD
- use exported cpu_features of <powerpc/cpu.h>

Part 3 - Kernel space Linux
- use cpu_has_feature() function of <asm/cpufeature.h>

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes 
2022-09-16 14:25:53 -07:00
Tino Reichardt
75e8b5ad84 Fix BLAKE3 tuneable and module loading on Linux and FreeBSD
Apply similar options to BLAKE3 as it is done for zfs_fletcher_4_impl.

The zfs module parameter on Linux changes from icp_blake3_impl to
zfs_blake3_impl.

You can check and set it on Linux via sysfs like this:
```
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle [fastest] generic sse2 sse41 avx2

[bash]# echo sse2 > /sys/module/zfs/parameters/zfs_blake3_impl
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle fastest generic [sse2] sse41 avx2
```

The modprobe module parameters may also be used now:
```
[bash]# modprobe zfs zfs_blake3_impl=sse41
[bash]# cat /sys/module/zfs/parameters/zfs_blake3_impl
cycle fastest generic sse2 [sse41] avx2
```

On FreeBSD the BLAKE3 implementation can be set via sysctl like this:
```
[bsd]# sysctl vfs.zfs.blake3_impl
vfs.zfs.blake3_impl: cycle [fastest] generic sse2 sse41 avx2
[bsd]# sysctl vfs.zfs.blake3_impl=sse2
vfs.zfs.blake3_impl: cycle [fastest] generic sse2 sse41 avx2 \
  -> cycle fastest generic [sse2] sse41 avx2
```

This commit changes also some Blake3 internals like these:
- blake3_impl_ops_t was renamed to blake3_ops_t
- all functions are named blake3_impl_NAME() now

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Co-authored-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes 
2022-09-16 14:25:53 -07:00
наб
6c8e9f09c2
Handle ECKSUM as new EZFS_CKSUM ‒ "insufficient replicas"
Add a meaningful error message for ECKSUM to common error messages.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes  
Closes 
Closes 
2022-09-16 13:59:25 -07:00
Ameer Hamza
577d41d3b2
zfs recv hangs if max recordsize is less than received recordsize
- Some optimizations for bqueue enqueue/dequeue.
- Added a fix to prevent deadlock when both bqueue_enqueue_impl()
and bqueue_dequeue() waits for signal to be triggered.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes 
2022-09-16 13:52:25 -07:00
Chunwei Chen
768eacedef
zfs_enter rework
Replace ZFS_ENTER and ZFS_VERIFY_ZP, which have hidden returns, with
functions that return error code. The reason we want to do this is
because hidden returns are not obvious and had caused some missing fail
path unwinding.

This patch changes the common, linux, and freebsd parts. Also fixes
fail path unwinding in zfs_fsync, zpl_fsync, zpl_xattr_{list,get,set}, and
zfs_lookup().

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes 
2022-09-16 13:36:47 -07:00
Richard Yao
cf66e7e594
Cleanup: Make memory barrier definitions consistent across kernels
We inherited membar_consumer() and membar_producer() from OpenSolaris,
but we had replaced membar_consumer() with Linux's smp_rmb() in
zfs_ioctl.c. The FreeBSD SPL consequently implemented a shim for the
Linux-only smp_rmb().

We reinstate membar_consumer() in platform independent code and fix the
FreeBSD SPL to implement membar_consumer() in a way analogous to Linux.

Reviewed-by: Konstantin Belousov <kib@FreeBSD.org>
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes 
2022-09-13 16:59:33 -07:00
Richard Yao
d5d10f2aef
Cleanup dead spa_boot code
Unused code detected by coverity.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes 
2022-09-13 16:40:10 -07:00
Richard Yao
0e4c830bc1
Cleanup: Use OpenSolaris functions to call scheduler
In our codebase, `cond_resched() and `schedule()` are Linux kernel
functions that have replaced the OpenSolaris `kpreempt()` functions in
the codebase to such an extent that `kpreempt()` in zfs_context.h was
broken. Nobody noticed because we did not actually use it. The header
had defined `kpreempt()` as `yield()`, which works on OpenSolaris and
Illumos where `sched_yield()` is a wrapper for `yield()`, but that does
not work on any other platform.

The FreeBSD platform specific code implemented shims for these, but the
shim for `schedule()` forced us to wait, which is different than merely
rescheduling to another thread as the original Linux code does, while
the shim for `cond_resched()` had the same definition as its kernel
kpreempt() shim.

After studying this, I have concluded that we should reintroduce the
kpreempt() function in platform independent code with the following
definitions:

	- In the Linux kernel:
		kpreempt(unused)	-> cond_resched()

	- In the FreeBSD kernel:
		kpreempt(unused)	-> kern_yield(PRI_USER)

	- In userspace:
		kpreempt(unused)	-> sched_yield()

In userspace, nothing changes from this cleanup. In the kernels, the
function `fm_fini()` will now call `kern_yield(PRI_USER)` on FreeBSD and
`cond_resched()` on Linux.  This is instead of `pause("schedule", 1)` on
FreeBSD and `schedule()` on Linux. This makes our behavior consistent
across platforms.

Note that Linux's SPL continues to use `cond_resched()` and
`schedule()`.  However, those functions have been removed from both the
FreeBSD code and userspace code.

This should have the benefit of making it slightly easier to port the
code to new platforms by making how things should be mapped less
confusing.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Neal Gompa <ngompa@datto.com>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes 
2022-09-12 09:55:37 -07:00
Don Brady
ede037cda7
Make zfs-share service resilient to stale exports
The are a few cases where stale entries in /etc/exports.d/zfs.exports 
will cause the nfs-server service to fail when starting up.

Since the nfs-server startup consumes /etc/exports.d/zfs.exports, the 
zfs-share service (which rebuilds the list of zfs exports) should run 
before the nfs-server service.

To make the zfs-share service resilient to stale exports, this change 
truncates the zfs config file as part of the zfs share -a operation.

Reviewed-by: Allan Jude <allan@klarasystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Don Brady <don.brady@delphix.com>
Closes 
2022-09-09 10:54:16 -07:00
Tony Hutter
e27e692bcc
zed: Fix config_sync autoexpand flood
Users were seeing floods of `config_sync` events when autoexpand was
enabled.  This happened because all "disk status change" udev events
invoke the autoexpand codepath, which calls zpool_relabel_disk(),
which in turn cause another "disk status change" event to happen,
in a feedback loop.  Note that "disk status change" happens every time
a user calls close() on a block device.

This commit breaks the feedback loop by only allowing an autoexpand
to happen if the disk actually changed size.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes: 
Closes: 
Closes 
2022-09-08 10:32:30 -07:00
Alexander Motin
37f6845c6f
Improve too large physical ashift handling
When iterating through children physical ashifts for vdev, prefer
ones above the maximum logical ashift, that we can actually use,
but within the administrator defined maximum.

When selecting top-level vdev ashift, do not set it to the defined
maximum in case physical ashift is even higher, but just ignore one.
Using the maximum does not prevent misaligned writes, but reduces
space efficiency.  Since ZFS tries to write data sequentially and
aggregates the writes, in many cases large misanigned writes may be
not as bad as the space penalty otherwise.

Allow internal physical ashifts for vdevs higher than SHIFT_MAX.
May be one day allocator or aggregation could benefit from that.

Reduce zfs_vdev_max_auto_ashift default from 16 (64KB) to 14 (16KB),
so that ZFS may still use bigger ashifts up to SHIFT_MAX (64KB),
but only if it really has to or explicitly told to, but not as an
"optimization".

There are some read-intensive NVMe SSDs that report Preferred Write
Alignment of 64KB, and attempt to build RAIDZ2 of those leads to a
space inefficiency that can't be justified.  Instead these changes
make ZFS fall back to logical ashift of 12 (4KB) by default and
only warn user that it may be suboptimal for performance.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by:	Alexander Motin <mav@FreeBSD.org>
Sponsored by:	iXsystems, Inc.
Closes 
2022-09-08 10:30:53 -07:00
Christian Schwarz
5724073517
make DMU_OT_IS_METADATA and DMU_OT_IS_ENCRYPTED return B_TRUE or B_FALSE
Without this patch, the

    ASSERT3U(dbuf_is_metadata(db), ==, arc_is_metadata(buf));

at the beginning of dbuf_assign_arcbuf can panic
if the object type is a DMU_OT_NEWTYPE that has
DMU_OT_METADATA set.

While we're at it, fix DMU_OT_IS_ENCRYPTED as well.

Reviewed-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Christian Schwarz <christian.schwarz@nutanix.com>
Closes 
2022-09-07 17:04:15 -07:00
Walter Huf
238cd4b863
Add xattr_handler support for Android kernels
Some ARM BSPs run the Android kernel, which has
a modified xattr_handler->get() function signature.
This adds support to compile against these kernels.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Walter Huf <hufman@gmail.com>
Closes 
2022-09-06 10:02:18 -07:00
Rob Wing
9d0887402b FreeBSD: add knlist_init_sx() for exclusive locks
This will be used to implement kqfilter support for zvol cdevs.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Rob Wing <rew@FreeBSD.org>
Closes 
2022-09-06 09:48:57 -07:00
Richard Yao
11df48ab8b
Cleanup Raid-Z Typo fixes
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes 
2022-09-06 09:43:21 -07:00
Umer Saleem
59767479ac
Add DD_FIELD string for snapshots_changed property
This commit adds DD_FIELD string used in extensified dsl_dir zap object
for snapshots_changed property.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes 
2022-09-02 13:33:50 -07:00
Andriy Gapon
ee9f3bca55
Add zfs.sync.snapshot_rename
Only the single snapshot rename is provided.
The recursive or more complex rename can be scripted.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: George Melikov <mail@gmelikov.ru>
Signed-off-by: Andriy Gapon <avg@FreeBSD.org>
Closes 
2022-09-02 13:31:19 -07:00
Ryan Moeller
7bb707ffaf FreeBSD: Organize sysctls
FreeBSD had a few platform-specific ARC tunables in the wrong place:

- Move FreeBSD-specifc ARC tunables into the same vfs.zfs.arc node as
  the rest of the ARC tunables.
- Move the handlers from arc_os.c to sysctl_os.c and add compat sysctls
  for the legacy names.

While here, some additional clean up:

- Most handlers are specific to a particular variable and don't need a
  pointer passed through the args.
- Group blocks of related variables, handlers, and sysctl declarations
  into logical sections.
- Match variable types for temporaries in handlers with the type of the
  global variable.
- Remove leftover comments.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2022-09-02 13:26:24 -07:00
Ryan Moeller
4723eba8c0 FreeBSD: Mark ZFS_MODULE_PARAM_CALL as MPSAFE
ZFS_MODULE_PARAM_CALL handlers implement their own locking if needed
and do not require Giant.

Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2022-09-02 13:26:04 -07:00
Richard Yao
0b30dc484f
FreeBSD: Cleanup dead code from VFS
The vfs_*_feature() macros turn anything that uses them into dead code,
so we can delete all of it.

As a side effect, zfs_set_fuid_feature() is now identical in
module/os/freebsd/zfs/zfs_vnops_os.c and
module/os/linux/zfs/zfs_vnops_os.c. A few other functions are identical
too. Future cleanup could move these into a common file.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Richard Yao <richard.yao@alumni.stonybrook.edu>
Closes 
2022-09-02 13:20:10 -07:00
Brian Behlendorf
9f346abbe8
Revert "Avoid panic with recordsize > 128k, raw sending and no large_blocks"
This reverts commit 80a650b7bb.  This change
inadvertently introduced a regression in ztest where one of the new ASSERTs
is triggered in dsl_scan_visitbp().

Reviewed-by: George Amanakis <gamanakis@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue  
Closes 
2022-08-25 13:33:32 -07:00
George Amanakis
0c4064d9a0
Fix zpool status in case of unloaded keys
When scrubbing an encrypted filesystem with unloaded key still report an
error in zpool status.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alek Pinchuk <apinchuk@axcient.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes 
Closes 
2022-08-22 17:42:01 -07:00
Coleman Kane
ad0967638b
Linux 6.0 compat: register_shrinker() now var-arg
The 6.0 kernel added a printf-style var-arg for args > 0 to the
register_shrinker function, in order to add names to shrinkers, in
commit e33c267ab70de4249d22d7eab1cc7d68a889bac2. This enables the
shrinkers to have friendly names exposed in /sys/kernel/debug/shrinker/.

Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes 
2022-08-08 16:18:30 -07:00
Ryan Moeller
947465b984
libzfs: Remove unused zpool_get_physpath()
This is an oddly specific function that has never had any consumers in
the history of this repo.  Get rid of it and the pile of helper
functions that exist for it.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ryan Moeller <ryan@iXsystems.com>
Closes 
2022-08-04 17:04:09 -07:00
Umer Saleem
9681de4657
Add snapshots_changed as property
Make dd_snap_cmtime property persistent across mount and unmount
operations by storing in ZAP and restore the value from ZAP on hold
into dd_snap_cmtime instead of updating it.

Expose dd_snap_cmtime as 'snapshots_changed' property that provides a
mechanism to quickly determine whether snapshot list for dataset has
changed without having to mount a dataset or iterate the snapshot list.

It specifies the time at which a snapshot for a dataset was last
created or deleted. This allows us to be more efficient how often we
query snapshots.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes 
2022-08-02 16:45:30 -07:00
Alek P
e8cf3a4f76
Implement a new type of zfs receive: corrective receive (-c)
This type of recv is used to heal corrupted data when a replica
of the data already exists (in the form of a send file for example).
With the provided send stream, corrective receive will read from
disk blocks described by the WRITE records. When any of the reads
come back with ECKSUM we use the data from the corresponding WRITE
record to rewrite the corrupted block.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Paul Zuchowski <pzuchowski@datto.com>
Signed-off-by: Alek Pinchuk <apinchuk@axcient.com>
Closes 
2022-07-28 15:52:46 -07:00
ixhamza
fb087146de
Add support for per dataset zil stats and use wmsum counters
ZIL kstats are reported in an inclusive way, i.e., same counters are
shared to capture all the activities happening in zil. Added support
to report zil stats for every datset individually by combining them
with already exposed dataset kstats.

Wmsum uses per cpu counters and provide less overhead as compared
to atomic operations. Updated zil kstats to replace wmsum counters
to avoid atomic operations.

Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes 
2022-07-20 17:14:06 -07:00
Alexander Motin
33dba8c792
Fix scrub resume from newly created hole
It may happen that scan bookmark points to a block that was turned
into a part of a big hole.  In such case dsl_scan_visitbp() may skip
it and dsl_scan_check_resume() will not be called for it.  As result
new scan suspend won't be possible until the end of the object, that
may take hours if the object is a multi-terabyte ZVOL on a slow HDD
pool, stretching TXG to all that time, creating all sorts of problems.

This patch changes the resume condition to any greater or equal block,
so even if we miss the bookmarked block, the next one we find will
delete the bookmark, allowing new suspend.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes 
2022-07-20 17:02:36 -07:00
ixhamza
f371cc18f8
Expose ZFS dataset case sensitivity setting via sb_opts
Makes the case sensitivity setting visible on Linux in /proc/mounts.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes 
2022-07-14 10:38:16 -07:00
Tino Reichardt
1d3ba0bf01
Replace dead opensolaris.org license link
The commit replaces all findings of the link:
http://www.opensolaris.org/os/licensing with this one:
https://opensource.org/licenses/CDDL-1.0

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes 
2022-07-11 14:16:13 -07:00
наб
dd66857d92 Remaining {=> const} char|void *tag
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2022-06-29 14:08:59 -07:00
наб
a926aab902 Enable -Wwrite-strings
Also, fix leak from ztest_global_vars_to_zdb_args()

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Closes 
2022-06-29 14:08:54 -07:00
Kristof Provost
325096545a
FreeBSD: only define B_FALSE/B_TRUE if NEED_SOLARIS_BOOLEAN is not set
If NEED_SOLARIS_BOOLEAN is defined we define an enum boolean_t, which
defines B_TRUE/B_FALSE as well. If we have both the define and the enum
things don't build (because that translates to
'enum { 0, 1 }     boolean_t').

While here also remove an incorrect '#else'. With it in place we only
parse a section if the include guard is triggered. So we'd only use that
code if this file is included twice. This is clearly unintended, and
also means we don't get the 'boolean_t' definition. Fix this.

Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Signed-off-by: Kristof Provost <kprovost@netgate.com>
Sponsored-By: Rubicon Communications, LLC ("Netgate")
Closes 
2022-06-28 14:11:38 -07:00
Alexander Motin
827322991f
Fix and disable blocks statistics during scrub
Block statistics calculation during scrub I/O issue in case of sorted
scrub accounted ditto blocks several times.  Embedded blocks on other
side were not accounted at all.  This change moves the accounting from
issue to scan stage, that fixes both problems and also allows to avoid
pool-wide locking and the lock contention it created.

Since this statistics is quite specific and is not even exposed now
anywhere, disable its calculation by default to not waste CPU time.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes 
2022-06-28 11:23:31 -07:00
Brian Behlendorf
b0f7dd276c Fix -Wattribute-warning in zfs_log_xvattr()
Restructure the code in zfs_log_xvattr() to use a lr_attr_end
structure when accessing lr_attr_t elements located after the
variable sized array.  This makes the code more understandable
and resolves the accessing beyond the end of the field warnings.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes 
Closes 
2022-06-27 14:18:57 -07:00
George Amanakis
80a650b7bb
Avoid panic with recordsize > 128k, raw sending and no large_blocks
The current codebase does not support raw sending buffers with block
size > 128kB when large_blocks is not active. This can happen in the
codepath dsl_dataset_sync()->dmu_objset_sync()->zio_nowait() which
calls back dmu_objset_write_done()->dsl_dataset_block_born(). If
dsl_dataset_sync() completes its run before dsl_dataset_block_born() is
called, we will end up not activating some of the necessary flags, while
having blocks based on those flags written in the filesystem. A
subsequent send will then panic.

Fix this by directly deciding in dmu_objset_sync() whether these flags
need to be activated later by dsl_dataset_sync(). Instead of panicking
due to a NULL pointer dereference in dmu_dump_write() in case of a send,
print out an error message. Also during scrub verify there are no
contradicting filesystem flags.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: George Amanakis <gamanakis@gmail.com>
Closes 
Closes 
2022-06-27 14:17:25 -07:00
Alexander Motin
c0bf952c84
Several B-tree optimizations
- Introduce first element offset within a leaf.  It allows to reduce
by ~50% average memmove() size when adding/removing elements.  If the
added/removed element is in the first half of the leaf, we may shift
elements before it and adjust the bth_first instead of moving more
elements after it.
 - Use memcpy() instead of memmove() when we know there is no overlap.
 - Switch from uint64_t to uint32_t.  It does not limit anything,
but 32-bit arches should appreciate it greatly in hot paths.
 - Store leaf capacity in struct btree to avoid 64-bit divisions.
 - Adjust zfs_btree_insert_into_leaf() to always result in balanced
leaves after splitting, no matter where the new element was inserted.
Not that we care about it much, but it should also allow B-trees with
as little as two elements per leaf instead of 4 previously.

When scrubbing pool of 12 SSDs, storing 1.5TB of 4KB zvol blocks this
reduces amount of time spent in memmove() inside the scan thread from
13.7% to 5.7% and total scrub time by ~15 seconds out of 9 minutes.
It should also reduce spacemaps load time, but I haven't measured it.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes 
2022-06-24 13:55:58 -07:00
Alexander Motin
1c0c729ab4
Several sorted scrub optimizations
- Reduce size and comparison complexity of q_exts_by_size B-tree.
Previous code used two 64-bit divisions and many other operations to
compare two B-tree elements.  It created enormous overhead.  This
implementation moves the math to the upper level and stores the score
in the B-tree elements themselves.  Since all that we need to store in
that B-tree is the extent score and offset, those can fit into single
8 byte value instead of 24 bytes of q_exts_by_addr element and can be
compared with single operation.
 - Better decouple secondary tree logic from main range_tree by moving
rt_btree_ops and related functions into dsl_scan.c as ext_size_ops.
Those functions are very small to worry about the code duplication and
range_tree does not need to know details such as rt_btree_compare.
 - Instead of accounting number of pending bytes per pool, that needs
atomic on global variable per block, account the number of non-empty
per-vdev queues, that change much more rarely.
 - When extent scan is interrupted by TXG end, continue it in the next
TXG instead of selecting next best extent.  It allows to avoid leaving
one truncated (and so likely not the best any more) extent each TXG.

On top of some other optimizations this saves about 1.5 minutes out of
10 to scrub pool of 12 SSDs, storing 1.5TB of 4KB zvol blocks.

Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed-by: Tom Caputi <caputit1@tcnj.edu>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored-By: iXsystems, Inc.
Closes 
2022-06-24 09:50:37 -07:00
Tino Reichardt
deb1213098
Fix memory allocation issue for BLAKE3 context
The kmem_alloc(sizeof (*ctx), KM_NOSLEEP) call on FreeBSD can't be
used in this code segment. Work around this by pre-allocating a percpu
context array for later use.

Reviewed-by: Ryan Moeller <ryan@iXsystems.com>
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de>
Closes 
2022-06-21 14:32:09 -07:00
crass
bc00d2c711
Add support for ARCH=um for x86 sub-architectures
When building modules (as well as the kernel) with ARCH=um, the options
-Dsetjmp=kernel_setjmp and -Dlongjmp=kernel_longjmp are passed to the C
preprocessor for C files. This causes the setjmp and longjmp used in
module/lua/ldo.c to be kernel_setjmp and kernel_longjmp respectively in
the object file. However, the setjmp and longjmp that is intended to be
called is defined in an architecture dependent assembly file under the
directory module/lua/setjmp. Since it is an assembly and not a C file,
the preprocessor define is not given and the names do not change. This
becomes an issue when modpost is trying to create the Module.symvers
and sees no defined symbol for kernel_setjmp and kernel_longjmp. To fix
this, if the macro CONFIG_UML is defined, then setjmp and longjmp
macros are undefined.

When building with ARCH=um for x86 sub-architectures, CONFIG_X86 is not
defined. Instead, CONFIG_UML_X86 is defined. Despite this, the UML x86
sub-architecture can use the same object files as the x86 architectures
because the x86 sub-architecture UML kernel is running with the same
instruction set as CONFIG_X86. So the modules/Kbuild build file is
updated to add the same object files that CONFIG_X86 would add when
CONFIG_UML_X86 is defined.

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Glenn Washburn <development@efficientek.com>
Closes 
2022-06-15 14:22:52 -07:00
Allan Jude
4ff7a8fa2f
Replace ZPROP_INVAL with ZPROP_USERPROP where it means a user property
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Sponsored-by: Klara Inc.
Closes 
2022-06-14 11:27:53 -07:00
Will Andrews
4ed5e25074 Add Linux namespace delegation support
This allows ZFS datasets to be delegated to a user/mount namespace
Within that namespace, only the delegated datasets are visible
Works very similarly to Zones/Jailes on other ZFS OSes

As a user:
```
 $ unshare -Um
 $ zfs list
no datasets available
 $ echo $$
1234
```

As root:
```
 # zfs list
NAME                            ZONED  MOUNTPOINT
containers                      off    /containers
containers/host                 off    /containers/host
containers/host/child           off    /containers/host/child
containers/host/child/gchild    off    /containers/host/child/gchild
containers/unpriv               on     /unpriv
containers/unpriv/child         on     /unpriv/child
containers/unpriv/child/gchild  on     /unpriv/child/gchild

 # zfs zone /proc/1234/ns/user containers/unpriv
```

Back to the user namespace:
```
 $ zfs list
NAME                             USED  AVAIL     REFER  MOUNTPOINT
containers                       129M  47.8G       24K  /containers
containers/unpriv                128M  47.8G       24K  /unpriv
containers/unpriv/child          128M  47.8G      128M  /unpriv/child
```

Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Will Andrews <will.andrews@klarasystems.com>
Signed-off-by: Allan Jude <allan@klarasystems.com>
Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Co-authored-by: Allan Jude <allan@klarasystems.com>
Co-authored-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com>
Sponsored-by: Buddy <https://buddy.works>
Closes 
2022-06-10 09:51:46 -07:00