if SCB Paging was enabled:
disconnect with more data to transfer
disconnected SCB gets paged out
target reconnects so we page SCB back in
target completes transfer so residual is 0
target disconnects
SCB gets reused but not paged out since the residual is 0 (optimization)
target reconnects so we page the SCB back in
we report a residual because of stale residual information.
The fix for this is to set a flag that forces the SCB to be paged back
up to the host if we page in an SCB with a residual
Pointed out by: Doug Ledford <dledford@dialnet.net>
Fix another bug: if argv[0] is NULL, garbadge args might be added for
shell script
Submitted by: Tor Egge <Tor.Egge@idi.ntnu.no> (with yet one fault detect from me)
for syscalls, so one frame was lost in backtraces from syscalls.
This is handled better in the kernel by using a different mcount
entry point for profiling before the frame pointer is set up.
Expand RCSID().
Use .p2align instead of the ambiguous .align.
Added idempotency ifdef.
Removed unused macros ALTENTRY(), ALTASENTRY(), ASENTRY(), _MID_ENTRY.
Cleaned up formatting.
Reviewed by: jdp reviewed an old version
Obtained from: parts from NetBSD
large enough to contain the ethernet header. There appears to be a
condition where the card can return "0" in some failure cases, and this
causes bad things to happen (a panic).
have successfully built, booted, and run a number of different ELF
kernel configurations, including GENERIC. LINT also builds and
links cleanly, though I have not tried to boot it.
The impact on developers is virtually nil, except for two things.
All linker sets that might possibly be present in the kernel must be
listed in "sys/i386/i386/setdefs.h". And all C symbols that are
also referenced from assembly language code must be listed in
"sys/i386/include/asnames.h". It so happens that failure to do
these things will have no impact on the a.out kernel. But it will
break the build of the ELF kernel.
The ELF bootloader works, but it is not ready to commit quite yet.
UN_ULOCK flag. This shows a locking violation but I couldn't find the
reason UN_ULOCK is not set or upper vnode is not unlocked. I added
the code that detect this case and adjust un_flags. DIAGNOSTIC kernel
doesn't adjust un_flags, but just panic here to help debug by kernel
hackers.
delay after we reset the card to allow the card to come back to life.
It appears the newer card takes longer to reset.
Submitted by: Samuel Lam <skl@ScalableNetwork.com>
type mismatches. There was no problem in practice (at least on 386's).
The timeout args still get bogusly cast from int to `void *' via
caddr_t and back to int.
type mismatches. mcd and scd were/are particularly bogus. They
used a general purpose function taking 2 args for the timeout
function and fudged varargs stuff to supply the second arg for the
timeout case. This broke `cc -mrtd'. Bounce through a timeout
function instead. The timeout arg still gets bogusly cast from
int to `void *' and back.
difference of approx 3mins in make world on my P6!!! This means
that vfork now has full address space sharing, so beware with
sloppy vfork programming. Also, you really do need to apply
the previously committed popen fix in libc.
type mismatches. There was no problem in practice (at least on 386's).
Don't cast NULL in calls to timeout functions. pcvt is fully prototyped
and doesn't support K&R.
Timeout functions take args of type `void *', so use magic numbers of
type `void *' for UPDATE_* to reduce the danger of wrong conversions.
Removed FreeBSD-pre-1.1-related TIMEOUT_FUNC_T macro. It was especially
bogus for the pre-1.1 case.
type mismatches. There was no problem in practice (at least on 386's).
Removed NetBSD-related TIMEOUT macro. NetBSD uses the same BSD4.4Lite
timeout interface as FreeBSD. As a concession to portability, declare
the timeout function without using the FreeBSD timeout_t typedef.
properly. Simply don't use the gcc macros if we're not gcc, and
declare prototypes for the byte-swapping functions in case the
macro versions are not used. The previous fix was wrong and broke
libpcap, which abuses -Dlint.
Don't pollute the namespace if _POSIX_SOURCE is defined. This is
broken - it makes almost everything in <machine/endian.h> inaccessible
if _POSIX_SOURCE is defined, yet <machine/endian.h> is not a POSIX
header. Other systems don't do it any better.
Removed always-false `BYTE_ORDER == BIG_ENDIAN' ifdef.
Obtained from: partly from Lite(2?) and NetBSD
(pt. unused) for TI PCI1130.
2. pccard.c: PCIC_RESUME_RESET is now (also) a sysctl. (Never make it
a #ifdef if it can be made a sysctl!)
3. pcic.c: make getb() and putb() proper member functions of struct
pcic_slot. Add a couple of missing casts.
wind up writing zeros instead of real data when the file is on an NFSv2
mounted directory.
While tracking this bug down, I noticed that nfs_asyncio was waking *all*
the iods when a block was written instead of just one per block. Fixing this
gives a 25% performance improvment for writes on v2 (less for v3).
Both are 2.2 candidates.
PR: kern/2774
# mount -t union (or null) dir1 dir2
# mount -t union (or null) dir2 dir1
The function namei in union_mount calls union_root. The upper vnode
has been already locked and vn_lock in union_root causes above panic.
Add printf's included in `#ifdef DIAGNOSTIC' for EDEADLK cases.
Clean up the unexpected busfree handler. We now look directly at the
message that might have caused the bus free to occur instead of looking
at an SCB flag. This makes the handling more robust and also allows for
recovery actions that might cause an "unexpected busfree" to be performed
even if an SCB is not availible to "tag". Most notably, this happens
when we don't find an SCB for a reconnecting target.
to fix a selection timeout problem.
If we can't find an SCB for the reconnecting target, issue a bus device
reset as the SCSI2 spec suggests.
Add a missing call to "add_scb_to_free_list" in the non paging case. In
the non-paging case, the SCBs don't really need to be on the free list,
but putting them there clears the tag field which is something the recovery
code depends on.
Zero the b_dirty{off,end} after cluster-comitting a group of buffers.
With these fixes, I was able to complete a 'make world' with remote src
and obj directories.
1) Dell Latitude XPi
This laptop has a strange, IMHO broken :-), keyboard controller which
wouldn't disable the keyboard interrupt. The kludge is to disable tty
intr. during set_keyboard(), used for changing LED and setting
typematic.
The patch also changes the function name:
set_keyboard() -> set_keyboard_param()
Although it is a static function, the name corrides with a routine in
`syscons' and is confusing when debugging the kernel which has both
`syscons' and `pcvt' with DDB. (Suggested by Bruce)
2) doreset() bug
doreset() failed to preserve some bits in the keyboard controller's
command byte during keyboard reset. This bug may put some keyboard
controllers in old motherboards (386 and 486) in a strange state,
resulting in complete keyboard lockup or random key input.
Reviewed by: Joerg
This patch fixes the problem of vic only capturing an even or odd frame plus
the my early patch for missing frames with resolutions higher than 320x240
in rgb mode.
The yuv422 patch introduces a minor bug in that a green line appears at the
bottom of the captured window . There is no easy work around for this right
now.
Reviewed by: various bt848 hackers
Submitted by: Amancio Hasty <hasty@rah.star-gate.com>
Increase the delay in read_eeprom_data() by two orders of magnitude.
> A better fix would be to make read_eeprom_data() call
> f_is_eeprom_busy() after the DELAY().
Submitted by: Samuel Lam <skl@ScalableNetwork.com>
