Commit Graph

205 Commits

Author SHA1 Message Date
Bryan Drewery
bd18fd57db DIRDEPS_BUILD: Regenerate without local dependencies.
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.

Sponsored by:	EMC / Isilon Storage Division
2016-02-24 17:20:11 +00:00
Ryan Stone
60d978a75b Fix /sbin/route to never look up (invalid) interface names through DNS
/sbin/route has a bug where if it is passed an interface name that does
not exist, it falls through and winds up interpreting it as a hostname.
It fails out eventually, but on a system where DNS lookup is broken you
can end up waiting for up to 60 seconds waiting for the DNS lookup to
timeout.  I'm not quite sure what happens if the DNS lookup somehow
succeeds but I doubt that can end well.

Reviewed by:	markj, cem
MFC after:	2 weeks
Sponsored by:	EMC/Isilon Storage Division
2015-09-17 16:56:49 +00:00
Simon J. Gerraty
ccfb965433 Add META_MODE support.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.

Still need to add real targets under targets/ to build packages.

Differential Revision:       D2796
Reviewed by: brooks imp
2015-06-13 19:20:56 +00:00
Simon J. Gerraty
44d314f704 dirdeps.mk now sets DEP_RELDIR 2015-06-08 23:35:17 +00:00
Simon J. Gerraty
98e0ffaefb Merge sync of head 2015-05-27 01:19:58 +00:00
Alexander V. Chernikov
69c4b56a74 Eliminate incorrect IPv6 mask guessing:
RFC 2374 concept of 'IPv6 Aggregatable Global Unicast Address Format' was
deprecated by RFC 3587 12 years ago.

Before:

15:06 [1] edge# netstat -rn6 | grep 2a02:6b8::
2a02:6b8::/32                     2a02:978:2::1                 UGS         em0
15:06 [1] edge# route -6n get 2a02:6b8::
route: writing to routing socket: No such process

After:
15:07 [1] edge# /usr/obj/usr/src/sbin/route/route -n6 get 2a02:6b8::
   route to: 2a02:6b8::
destination: 2a02:6b8::
       mask: ffff:ffff::
    gateway: 2a02:978:2::1
        fib: 0
  interface: em0
      flags: <UP,GATEWAY,DONE,STATIC>
 recvpipe  sendpipe  ssthresh  rtt,msec    mtu        weight    expire
       0         0         0         0      1500         1         0

MFC after:	2 weeks
2015-01-16 11:17:30 +00:00
Simon J. Gerraty
9268022b74 Merge from head@274682 2014-11-19 01:07:58 +00:00
Alexander V. Chernikov
7f948f12f6 Finish r274175: do control plane MTU tracking.
Update route MTU in case of ifnet MTU change.
Add new RTF_FIXEDMTU to track explicitly specified MTU.

Old behavior:
ifconfig em0 mtu 1500->9000 -> all routes traversing em0 do not change MTU.
User has to manually update all routes.
ifconfig em0 mtu 9000->1500 -> all routes traversing em0 do not change MTU.
However, if ip[6]_output finds route with rt_mtu > interface mtu, rt_mtu
gets updated.

New behavior:
ifconfig em0 mtu 1500->9000 -> all interface routes in all fibs gets updated
with new MTU unless RTF_FIXEDMTU flag set on them.
ifconfig em0 mtu 9000->1500 -> all routes in all fibs gets updated with new
MTU unless RTF_FIXEDMTU flag set on them AND rt_mtu is less than ifp mtu.

route add ... -mtu XXX automatically sets RTF_FIXEDMTU flag.
route change .. -mtu 0 automatically removes RTF_FIXEDMTU flag.

PR:		194238
MFC after:	1 month
CR:		D1125
2014-11-17 01:05:29 +00:00
Alexander V. Chernikov
670e8b3b8c Kill custom in_matroute() radix mathing function removing one rte mutex lock.
Initially in_matrote() in_clsroute() in their current state was introduced by
r4105 20 years ago. Instead of deleting inactive routes immediately, we kept them
in route table, setting RTPRF_OURS flag and some expire time. After that, either
GC came or RTPRF_OURS got removed on first-packet. It was a good solution
in that days (and probably another decade after that) to keep TCP metrics.
However, after moving metrics to TCP hostcache in r122922, most of in_rmx
functionality became unused. It might had been used for flushing icmp-originated
routes before rte mutexes/refcounting, but I'm not sure about that.

So it looks like this is nearly impossible to make GC do its work nowadays:

in_rtkill() ignores non-RTPRF_OURS routes.
route can only become RTPRF_OURS after dropping last reference via rtfree()
which calls in_clsroute(), which, it turn, ignores UP and non-RTF_DYNAMIC routes.

Dynamic routes can still be installed via received redirect, but they
have default lifetime (no specific rt_expire) and no one has another trie walker
to call RTFREE() on them.

So, the changelist:
* remove custom rnh_match / rnh_close matching function.
* remove all GC functions
* partially revert r256695 (proto3 is no more used inside kernel,
  it is not possible to use rt_expire from user point of view, proto3 support
  is not complete)
* Finish r241884 (similar to this commit) and remove remaining IPv6 parts

MFC after:	1 month
2014-11-11 02:52:40 +00:00
Alexander V. Chernikov
c8dce4fe5a Put "break" after err() to please coverity.
Reported by:	Coverity
CID:		1250795
2014-11-04 10:21:34 +00:00
Alexander V. Chernikov
ad4278e8fd Print human-readable error for "route not found" case.
Submitted by:	vsevolod (initial version)
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2014-10-31 13:37:47 +00:00
Simon J. Gerraty
fae50821ae Updated dependencies 2014-05-16 14:09:51 +00:00
Simon J. Gerraty
76b28ad6ab Updated dependencies 2014-05-10 05:16:28 +00:00
Simon J. Gerraty
cc3f4b9965 Merge from head 2014-05-08 23:54:15 +00:00
Alexander V. Chernikov
3deb3649d5 Fix incorrect netmasks being passed via rtsock.
Since radix has been ignoring sa_family in passed sockaddrs,
no one ever has bothered filling valid sa_family in netmasks.
Additionally, radix adjusts sa_len field in every netmask not to
compare zero bytes at all.

This leads us to rt_mask with sa_family of AF_UNSPEC (-1) and
arbitrary sa_len field (0 for default route, for example).

However, rtsock have been passing that rt_mask intact for ages,
requiring all rtsock consumers to make ther own local hacks.
We even have unfixed on in base:

do `route -n monitor` in one window and issue `route -n get addr`
for some directly-connected address. You will probably see the following:

got message of size 304 on Thu May  8 15:06:06 2014
RTM_GET: Report Metrics: len 304, pid: 30493, seq 1, errno 0, flags:<UP,DONE,PINNED>
locks:  inits:
sockaddrs: <DST,GATEWAY,NETMASK,IFP,IFA>
 10.0.0.0 link#1 (255) ffff ffff ff em0:8.0.27.c5.29.d4 10.0.0.92
_________________^^^^^^^^^^^^^^^^^^

after the change:

got message of size 312 on Thu May  8 15:44:07 2014
RTM_GET: Report Metrics: len 312, pid: 2895, seq 1, errno 0, flags:<UP,DONE,PINNED>
locks:  inits:
sockaddrs: <DST,GATEWAY,NETMASK,IFP,IFA>
 10.0.0.0 link#1 255.255.255.0 em0:8.0.27.c5.29.d4 10.0.0.92
_________________^^^^^^^^^^^^^^^^^^

Sponsored by:	Yandex LLC
MFC after:	1 month
2014-05-08 11:56:06 +00:00
Warner Losh
c6063d0da8 Use src.opts.mk in preference to bsd.own.mk except where we need stuff
from the latter.
2014-05-06 04:22:01 +00:00
Simon J. Gerraty
3b8f084595 Merge head 2014-04-28 07:50:45 +00:00
Bjoern A. Zeeb
a780104e1f When switching variables to flags in r243185 a few cases were missed.
After r263152 this leaves unused variables if route(8) is compiled
without INET support.
Switch the remaining variable accesses to flags and remove now obsolete
variables.

Reviewed by:	glebius
MFC after:	1 week
2014-04-16 12:29:45 +00:00
Gleb Smirnoff
45c203fce2 Remove AppleTalk support.
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.

Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
2014-03-14 06:29:43 +00:00
Gleb Smirnoff
2c284d9395 Remove IPX support.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.

Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
2014-03-14 02:58:48 +00:00
Alexander V. Chernikov
120dc21b86 Bump dates in nestat(1) and route(8) man pages.
Fix several small errors introduced by r260524.

Suggested by:	glebius
MFC after:	2 weeks
2014-01-11 09:44:00 +00:00
Alexander V. Chernikov
17ed2e8ea8 Add -4/-6 shorthand for -finet/-finet6 in route(8) and netstat(8).
MFC after:	2 weeks
2014-01-10 23:08:18 +00:00
Alexander V. Chernikov
88d2c8fc87 Do some more sanity checks in route(8): require netmask to have
the same address family as destination.

Found by:	jmg
MFC after:	2 weeks
2014-01-09 10:40:36 +00:00
Eitan Adler
a1e8527fd1 route(1): Pull static data to the top of the file.
This is a pre-requisisite to some upcoming changes.

Submitted by:	Sebastian Huber <sebastian.huber@embedded-brains.de>
Discussed on:	-hackers
2013-12-04 20:15:53 +00:00
Eitan Adler
2cd2dfc435 route(1): Pull static buffer out of the function and into function scope.
This will make it easier to link as a library.

Submitted by:	Sebastian Huber <sebastian.huber@embedded-brains.de>
Discussed on:	-hackers
2013-12-04 20:13:29 +00:00
Eitan Adler
9474873899 route(1): Pull static buffer out of the function and into function scope.
This will make it easier to link as a library.

Submitted by:	Sebastian Huber <sebastian.huber@embedded-brains.de> (older version)
Discussed on:	-hackers
2013-12-04 20:08:57 +00:00
Eitan Adler
2fc0b58544 route(1): Pull static variable out of the function and into function scope.
This will make it easier to link as a library.

Submitted by:	Sebastian Huber <sebastian.huber@embedded-brains.de> (older version)
Discussed on:	-hackers
2013-12-04 20:07:34 +00:00
Eitan Adler
b9f2ea4a57 route(1): Pull static buffer out of the function and into function scope.
This will make it easier to link as a library.

Submitted by:	Sebastian Huber <sebastian.huber@embedded-brains.de> (older version)
Discussed on:	-hackers
2013-12-04 20:03:55 +00:00
Eitan Adler
eeca71dbbf Avoid using a static buffer in atalk_ntoa. This will help allow users to call route(1) as a library.
Submitted by:	Sebastian Huber <sebastian.huber@embedded-brains.de> (older version)
Discussed on:	-hackers
Reviwed by:	adri (different older version)
2013-12-04 05:06:56 +00:00
Eitan Adler
4cb3201829 Add const qualifier where appropriate
Submitted by:	Sebastian Huber <sebastian.huber@embedded-brains.de>
2013-12-04 04:29:52 +00:00
Eitan Adler
df0888760a Add const qualifier where appropriate
Submitted by:	Sebastian Huber <sebastian.huber@embedded-brains.de>
2013-12-04 04:28:49 +00:00
Eitan Adler
9b80225631 Turn 'n' into a local variable. This is required for additional changes.
Submitted by:	Sebastian Huber <sebastian.huber@embedded-brains.de>
2013-12-04 04:28:00 +00:00
Hiroki Sato
6c3bcdf0de Use long explicitly for the time difference. 2013-10-18 02:22:38 +00:00
Hiroki Sato
de109e29ef - Add relative specification in expiration time.
- Add proto3 option for RTF_PROTO3.
- Use %lu for members of struct rt_metrics.
2013-10-17 19:04:05 +00:00
Simon J. Gerraty
3caf0790a8 Merge head@256284 2013-10-13 02:35:19 +00:00
Gleb Smirnoff
3bf351b29a When destination parameter is missing, exit with a clear synopsis,
instead of writing to kernel and printing EINVAL description.

PR:		bin/181532
Submitted by:	Kurt Jaeger <fbsd-pr opsec.eu>
Approved by:	re (hrs)
2013-10-08 08:16:17 +00:00
Simon J. Gerraty
d1d0158641 Merge from head 2013-09-05 20:18:59 +00:00
Hiroki Sato
15768a8b07 Fix boundary check of sockaddr array.
Reported by:	uqs
2013-08-01 04:50:46 +00:00
Hiroki Sato
d2034d1b22 Fix a bug in cp += SA_SIZE() in RTA_* loop. This could prevent
RTA_IFP from displaying correctly in route get subcommand.

Spotted by:	dim
2013-07-24 04:05:48 +00:00
Hiroki Sato
9ae3241587 - Use getnameinfo() for both of AF_INET and AF_INET6 in routename().
- Add missing "static".
2013-07-21 14:27:07 +00:00
Hiroki Sato
1addf6e47a - Fix nflag in routename().
- Display a AF_LINK address in #linkN when sdl_{nlen,alen,slen) == 0 and
  sdl_index != 0.
- Reduce unnecessary loop in pmsg_addrs().
- Remove iso_ntoa().  This is not used.
2013-07-21 11:59:41 +00:00
Hiroki Sato
247ba4776c - Simplify getaddr() and print_getmsg() by using RTAX_* instead of RTA_*
as the argument.
- Reduce unnecessary loop in print_getmsg().
2013-07-20 16:46:51 +00:00
Hiroki Sato
b3e0158e59 Show "default" for the zero-filled address consistently when nflag == 0. 2013-07-20 15:58:43 +00:00
Hiroki Sato
74ff9accb4 Add cast to (void *) to the following cases to suppress warnings by
-Wcast-align.  These do not increase the alignment requirement:

- rtm = (struct rt_msghdr *)(rtm + rtm->rtm_msglen)
- struct sockaddr *sa = &sa0; sX = (struct sockaddr_X *)sa
2013-07-20 15:23:42 +00:00
Hiroki Sato
8207f478fc Fix a gcc warning.
Pointy hat to:	hrs
2013-07-18 02:34:25 +00:00
Hiroki Sato
171863ac75 Use NET_RT_DUMP.0.FIB leaf node instead of setting td_proc->p_fibnum. 2013-07-17 14:15:00 +00:00
Hiroki Sato
826b6d6978 - Add support of MK_INET_SUPPORT=no.
- Fix a bug in sodump() which prevented struct sockaddr_in6 from displaying.
- Fix a bug in in fiboptlist_csv() which could cause free() of uninitialized
  pointer.
- Style cleanups:
 . Add missing "static" keywords.
 . Use an array of struct sockaddr_storage instead of sockunion for rtmsg.
 . Use err() and errx() instead of pair of fprintf(stderr, "...") + exit(1).
 . Use nitems() macro.
 . Various style(9) fixes.
2013-07-17 14:05:20 +00:00
Hiroki Sato
0365230a1a Simplify keywords.h generation. 2013-07-17 13:47:13 +00:00
Hiroki Sato
7df84c2b74 Fix a bug that the gateway address was not shown when a -gateway modifier
was used.
2013-06-09 17:40:06 +00:00
Simon J. Gerraty
7cf3a1c6b2 Updated dependencies 2013-03-11 17:21:52 +00:00