comments to longer, also refining strange ones.
Properly use #ifdef rather than #if defined() where possible. Four
#if defined(PCBGROUP) occurances (netinet and netinet6) were ignored to
avoid conflicts with eventually upcoming changes for RSS.
Reported by: bde (most)
Reviewed by: bde
MFC after: 3 days
If set to 1, no ABORT is sent back in response to an incoming
INIT. If set to 2, no ABORT is sent back in response to
an out of the blue packet. If set to 0 (the default), ABORTs
are sent.
Discussed with rrs@.
MFC after: 1 month.
in6m_release_locked() to defer calls to mld_v1_transmit_report() until
after the IF_ADDR_LOCK is dropped. This removes a race where the lock
is dropped and reacquired while attempting to walk an interface's
address list.
Reviewed by: bz
MFC after: 1 week
reference on a group in the leaving state while iterating over the loop.
Instead, use the same approach used in igmp_ifdetach() and mld_ifdetach()
of placing the groups to free on pending release list and then releasing
the references after dropping the IF_ADDR_LOCK. This closes an ugly race
where the code was dropping the lock in the middle of iterating over the
list. It also fixes some additional potential use-after-free bugs since
the cancellation routine also applied other changes to the group after
dropping the reference. Now those changes are performed before the
reference is dropped and the group is potentially freed.
Prodded to fix by: glebius
Reviewed by: bz
MFC after: 1 week
of the SIOC[DG]LIFADDR icotls before dropping the IF_ADDR_LOCK() and
release the reference after using it. This prevents the address from
being potentially freed out from under the ioctl handler.
Reviewed by: bz
MFC after: 1 week
from scratch, copying needed functionality from the old implemenation
on demand, with a thorough review of all code. The main change is that
interface layer has been removed from the CARP. Now redundant addresses
are configured exactly on the interfaces, they run on.
The CARP configuration itself is, as before, configured and read via
SIOCSVH/SIOCGVH ioctls. A new prefix created with SIOCAIFADDR or
SIOCAIFADDR_IN6 may now be configured to a particular virtual host id,
which makes the prefix redundant.
ifconfig(8) semantics has been changed too: now one doesn't need
to clone carpXX interface, he/she should directly configure a vhid
on a Ethernet interface.
To supply vhid data from the kernel to an application the getifaddrs(8)
function had been changed to pass ifam_data with each address. [1]
The new implementation definitely closes all PRs related to carp(4)
being an interface, and may close several others. It also allows
to run a single redundant IP per interface.
Big thanks to Bjoern Zeeb for his help with inet6 part of patch, for
idea on using ifam_data and for several rounds of reviewing!
PR: kern/117000, kern/126945, kern/126714, kern/120130, kern/117448
Reviewed by: bz
Submitted by: bz [1]
after its installation. This removal may be accidental and can
prevent the default route from being installed in the future if
the associated default router has the best preference. The cause
is the lack of status update in the default router on the state
of its route installation in the kernel FIB. This patch fixes
the described problem.
Reviewed by: hrs, discussed with hrs
MFC after: 5 days
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
inp_socket->so_options dereference when we may not acquire the lock on
the inpcb.
This fixes the crash due to NULL pointer dereference in
in_pcbbind_setup() when inp_socket->so_options in a pcb returned by
in_pcblookup_local() was checked.
Reported by: dave jones <s.dave.jones@gmail.com>, Arnaud Lacombe <lacombar@gmail.com>
Suggested by: rwatson
Glanced by: rwatson
Tested by: dave jones <s.dave.jones@gmail.com>
separation rewrite changes. r196865 was committed to fix a scope
violation problem in the following test scenario:
box-1# ifconfig em0 inet6 2001:db8:1:: prefixlen 64 anycast
box-1# ifconfig em1 inet6 2001:db8:2::1 prefixlen 64
box-2# ifconfig re0 inet6 2001:db8:1::6 prefixlen 64
em0 and re0 are on the same link.
box-2# ping6 2001:db8:1::
PING6(56=40+8+8 bytes) 2001:db8:1::6 --> 2001:db8:1::
the ICMPv6 response should have a source address of em1, which
is 2001:db8:2::1, not the link-local address of em0.
That code is no longer necessary and breaks the IPv6-Ready logo
testing, so revert it now.
Reviewed by: hrs
MFC after: 3 days
inlined by Qing Li in his big new-ARP commit. I am going to utilize
them in my newcarp work, and also these functions left declared
in in6_var.h for all the time they were absent.
Reviewed by: bz
determine if a loopback route should be installed for an interface
IPv6 address. Another condition is the address must not belong to a
looopback interface.
Reviewed by: hrs
MFC after: 3 days
appending the new mbuf to the chain reference but possibly causing an mbuf
nextpkt loop leading to a memory used after handoff (or having been freed)
and leaking an mbuf here.
Reviewed by: rwatson, brooks
MFC after: 3 days
(r225485). When setting an interface name to it, the following
configurations will be enabled:
1. "no_radr" is set to all IPv6 interfaces automatically.
2. "-no_radr accept_rtadv" will be set only for $ipv6_cpe_wanif. This is
done just before evaluating $ifconfig_IF_ipv6 in the rc.d scripts (this
means you can manually supersede this configuration if necessary).
3. The node will add RA-sending routers to the default router list
even if net.inet6.ip6.forwarding=1.
This mode is added to conform to RFC 6204 (a router which connects
the end-user network to a service provider network). To enable
packet forwarding, you still need to set ipv6_gateway_enable=YES.
Note that accepting router entries into the default router list when
packet forwarding capability and a routing daemon are enabled can
result in messing up the routing table. To minimize such unexpected
behaviors, "no_radr" is set on all interfaces but $ipv6_cpe_wanif.
Approved by: re (bz)
mld_set_version() is called only from mld_v1_input_query() and
mld_v2_input_query() both holding the if_addr_mtx lock, and then calling
into mld_v2_cancel_link_timers() acquires it the second time, which results
in mtx recursion. To avoid that, delay if_addr_mtx acquisition until after
mld_set_version() is called; while here, further reduce locking scope
to protect only the needed pieces: if_multiaddrs, in6m_lookup_locked().
PR: kern/158426
Reported by: Thomas <tps vr-web.de>,
Tom Vijlbrief <tom.vijlbrief xs4all.nl>
Tested by: Tom Vijlbrief
Reviewed by: bz
Approved by: re (kib)
Distinguish IPv4 and IPv6 addresses and optional port numbers in
user space to set the option for the correct protocol family.
Add support in the kernel for carrying the new IPv6 destination
address and port.
Add support to TCP and UDP for IPv6 and fix UDP IPv4 to not change
the address in the IP header.
Add support for IPv6 forwarding to a non-local destination.
Add a regession test uitilizing VIMAGE to check all 20 possible
combinations I could think of.
Obtained from: David Dolson at Sandvine Incorporated
(original version for ipfw fwd IPv6 support)
Sponsored by: Sandvine Incorporated
PR: bin/117214
MFC after: 4 weeks
Approved by: re (kib)
people think: returning true for an address in any connected subnet, not
necessarily on the local machine.
Sponsored by: Sandvine Incorporated
MFC after: 2 weeks
Approved by: re (kib)
* Decouple the path supervision using a separate HB timer per path.
* Add support for potentially failed state.
* Bring back RTO.min to 1 second.
* Accept packets on IP-addresses already announced via an ASCONF
* While there: do some cleanups.
Approved by: re@
MFC after: 2 months.
same as the host address. This already works fine for INET6 and ND6.
While here, remove two function pointers from struct lltable which are
only initialized but never used.
MFC after: 3 days
