(32 and 64-bit, LE and BE).
The changes were tested with QEMU's 'mips' target.
Most of the implementation was lifted from the ARM version, the appropriate
MIPS-specific things were implemented.
With these changes I am able to go all the way through the u-boot->ubldr->kernel
boot chain in QEMU on all combinations of bit-ness and endian-ness.
For the tests I've used FAT32 disk images (as FAT32 is supported by U-boot),
which include /boot/kernel/kernel and /boot/kernel/ubldr.bin
In U-boot I do:
fatload ide 0 <LOAD_ADDR> /boot/kernel/ubldr.bin; go <LOAD_ADDR>
where LOAD_ADDR is 80800000 for 32-bit and ffffffff80800000 for 64-bit
Then it's the usual ubldr that takes over and loads and starts a kernel.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5313
ubldr.
The changes are mostly dealing with removing unnecessary casts from the U-Boot
API (we're passing only pointers, no obvious reason to cast them to uint32_t),
cleaning up some compiler warnings and using the proper printf format
specifiers in order to be able to compile cleanly for both 32-bit and 64-bit
MIPS targets.
Reviewed by: imp
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5312
translate directly into calls to their namesake API functions in
libvmmapi.
It is an improvement over the existing setreg(), setmsr(), setcr()
setgdt() and exec() callbacks in that the new additions give full
control and don't assume we're booting FreeBSD, like exec() and
don't assume one only wants to set the value of RSP, like setreg().
sys/boot/fdt/Makefile
sys/boot/uboot/fdt/Makefile
sys/boot/uboot/lib/Makefile
This causes compilation issues on MIPS due to trying to link PIC with non-PIC
code. This revision includes bsd.stand.mk in the above files.
Reviewed by: imp
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5311
Although this may not be an issue in practice, it would be more correct if the 64-bit version was used. Also, using the 64-bit version would make it easier to add support for 64-bit ubldr on MIPS.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5310
The HDMI driver will attach a framebuffer device when a display is
connected. If the EDID can be read and contains a preferred mode, it
will be used. Otherwise the framebuffer will default to 800x600.
In addition, if the EDID contains a CEA-861 extension block and the
"basic audio" flag is set, audio playback at 48kHz 16-bit stereo is
enabled on the controller.
Reviewed by: andrew
Approved by: gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D5383
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
Tested on Spike simulator with 2 and 16 cores (tlb enabled),
so set MAXCPU to 16 at this time.
This uses FDT data to get information about CPUs
(code based on arm64 mp_machdep).
Invalidate entire TLB cache as it is the only way yet.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
import it into the loader(8) env as dhcp.root-path, so that it overrides
any dhcp/bootp server-provided path.
Now if you have a dhcp server available you can easily net-boot a u-boot
system even if you don't control the dhcp server config, by setting just
two variables in the u-boot env:
loaderdev=net
rootpath=<nfsserverip>:<pathname>
Previously you had to either accept all the dhcp parameters from the
server without the ability to locally provide the rootpath, or you had
to forego dhcp and set more vars (ipaddr, netmask, serverip, rootpath).
configuration from the FDT data, then set the pins into the requested
state. As part of this the gpio controller now reports the correct number
of pins instead of returning the number of bank * 32.
To allow for a future consolidated kernel we add the SOC_ALLWINNER_A10 and
SOC_ALLWINNER_A20 kernel options. These need to be set as appropriate for
the SoC the kernel will boot on.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5177
A10/A20 SoC. Based loosely on the submitters NetBSD driver, tested on
Cubieboard 2. Playback and capture are supported.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5202
dts files. It may be removed once it will be fixed upstream.
This is done just to supresses a warning during dtb evaluation as
there is no elm driver in tree at present.
least the audio codec driver currently in review.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5050
o Add kernel configuration for QEMU.
Both SPIKE and QEMU kernel configs are temporary (until
we will be able to obtain DTB from loader).
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
* Use the Linux compat string
* Use EARLY_DRIVER_MODULE to attach at the right time
* Add a generic A10 kernel config file
* A20 now use generic_timer
* Add two new dts files for Olimex boards
* Update our custom DTS file for A10 and A20 to use the same compatible
property names as the vendor ones.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4792
copyin and copyout code handle virtual addresses such that they will take
a virtual address and convert it into a valid physical address. It may
also mean we fail to boot as the elf files load address could be 0.
Sponsored by: ABT Systems Ltd
so will access data from an unrelocated address. This is only needed for
self relocating code on ARMv7, however this is true for both ubldr and
loader.efi, the only two loaders we support on ARMv7.
While here also force the fpu to be none as is done in libstand.
Sponsored by: ABT Systems Ltd
stores to clear it.
While here reduce the alignment of the data from 4k to 16 byte aligned.
This should be more than enough, without wasting too much space.
Sponsored by: ABT Systems Ltd
While the later is a better random generator than the former, the main
reason of the change is that random() has a better chance to work with
libstand(3).
At this time we don't include random number generators in bootforth
so this has no effect.
in boot1, like is normally done. When a keyboard appears in the UEFI
device tree, assume -D -h, just like on a BIOS boot.
# It is unclear if an ACPI keyboard appearing in the tree means there's
# a real keyboard or not. A USB keyboard doesn't seem to appear unless
# it is really there.
Differential Revision: https://reviews.freebsd.org/D5223
I previously disconnected kgzdr based on a misunderstanding.
I'd still like to transition to supporting only the loader(8)-based
boot path for handling compressed kernels, but that can follow the
standard deprecation procedure.
This reverts r291113.
Requested by: dteske
This causes boot from external media (installer USB image) to mount / from
the default ZFS BE, rather than the USB device.
Reported by: kmoore
MFC after: 5 days
Sponsored by: ScaleEngine Inc.
With warnings now enabled some plaforms where failing due to warnings.
* Fix st_size printed as a size_t when its actually an off_t.
* Fix pointer conversion in load_elf for some 32bit platforms due to 64bit
off in ef.
MFC after: 2 days
X-MFC-With:
Sponsored by: Multiplay
Fix EFI boot support when presented with multiple valid boot partitions
across multiple devices.
It now prefers to boot from partitions that are present on the underlying
device that the boot1 image was loaded from. This means that it will boot
from the partitions on device the user chose from EFI boot menu in
preference to those on other devices.
Also fixed is the recovery from a failed attempt to boot, from a seemingly
valid partition, by continuing to trying all other available partitions
no matter what the error.
boot1 now use * to signify a partition what was accepted from the preferred
device and + otherwise.
Finally some error messages where improved and DPRINTF's with slowed boot
to aid debugging.
ZFS will still be preferred over UFS when both are available on the boot
device.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5108
to open the device in exclusive mode as, without this, the firmware may
also be reading packets off the interface leading to a race.
Reviewed by: emaste
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4132
This is the final step required allowing to compile and to run RISC-V
kernel and userland from HEAD.
RISC-V is a completely open ISA that is freely available to academia
and industry.
Thanks to all the people involved! Special thanks to Andrew Turner,
David Chisnall, Ed Maste, Konstantin Belousov, John Baldwin and
Arun Thomas for their help.
Thanks to Robert Watson for organizing this project.
This project sponsored by UK Higher Education Innovation Fund (HEIF5) and
DARPA CTSRD project at the University of Cambridge Computer Laboratory.
FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv
Reviewed by: andrew, emaste, kib
Relnotes: Yes
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4982
make it possible for efi_console to recognize and translate box characters
on i386 build (unsigned versus signed char passed as int issue).
Submitted by: Toomas Soome <tsoome at me.com>
Reviewed by: emaste, smh, dteske
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D4993
hate adding yet another define, but it is the lessor of the evil
choices available. Kill another evil by removing PATH_BOOT3 and
replacing it with PATH_LOADER or PATH_LOADER_ZFS as appropriate.
PR: 206659
boot1 to pass in files with newlines in them. Now that the EFI loader
groks foo=bar on the command line, this can allow a more general setup
than traditional boot loader args will allow.
Differential Revision: https://reviews.freebsd.org/D5038
Simple bus space stubs require the VA-PA mapping
to be identical.
Approved by: hselasky, cognet (mentor)
Differential revision: https://reviews.freebsd.org/D4314
Remove old header from the include list and declare extern symbol
for delay() function.
Approved by: hselasky, cognet (mentor)
Differential revision: https://reviews.freebsd.org/D5012
When processing loader.conf if console contained an entry for an unsupported
console then cons_set would return an error refusing to set any console.
This has two side effects:
1. Forth would throw a syntax error and stop processing loader.conf at that
point.
2. The value of console is ignored.
#1 Means other important loader.conf entries may not be processed, which is
clearly undesirable.
#2 Means the users preference for console aren't applied even if they did
contain valid options. Now we have support for multi boot paths from a
single image e.g. bios and efi mode the console preference needs to deal
with the need to set preference for more than one source.
Fix this by:
* Returning CMD_OK where possible from cons_set.
* Allowing set with at least one valid console to proceed.
Reviewed by: allanjude
MFC after: 1 week
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5018
EFI was mixing caching in two separate places causing issues when multiple
partitions where tested.
Eliminate this by removing fsstat and re-factoring fsread into fsread_size,
adding basic parameter validation.
Also:
* Enhance some error print outs.
* Fix compilation under UFS1_ONLY and UFS2_ONLY
* Use sizeof on vars instead of structs.
* Add basic parameter validation to fsread_size.
MFC after: 1 week
X-MFC-With: r293268
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4989
