a simple version of bcopy() so we avoid picking up the overly-complex
implementation in libc (via libstand). This is not necessary on
-current, but RELENG_4 has apparently just exceeded the 15-sector
limit for boot1.
Reviewed by: wilko
because the buffers we use could end up spanning a 64k boundary.
Unfortunately it causes too much bloat (228 -> 72 bytes free) to
just reinstate the old malloc() function.
Instead, define a structure that contains all 4 buffers which must
not cross 64k boundaries. We allocate a 64k-aligned instance in
main() using the magic that was in the old boot2 malloc() function.
This brings the free space down to 168 bytes, but that is still
better than it was before revision 1.35 (136 bytes).
Reported by: Mike Brancato <funnyguy@digitalsmackdown.net>
Pointy-hat to: iedowse
done with boot1 on the alpha. We use 4k buffers regardless of the
actual filesystem block size.
Remove the simple malloc() implementation, as it is no longer used.
larger than 8k. We now use 4k buffers regardless of the filesystem
block size, so there is no longer a static limit.
Simply increasing the buffer size from 8k to 16k as done on the
i386 doesn't work on the alpha, probably because it causes us
to overshoot boot1's 48k runtime memory limit.
Tested by: naddy
All the alpha loaders should use the same version file. Also, we might
should merge the various loaders (cdboot, loader, netboot) into one loader
that can boot off of disks, CD's, and network devices. The version bump
is needed so the FICL scripts won't bomb out thinking that the netboot
binary is too old.
backing out the 1024 sector boot0, but revision 1.12 had nothing to do with
that. Instead, it documented various compile time options for boot0 and
allowed them to be overridden via make.conf or options on the make
command line.
- Change the 'fopen' keyword to accept a mode parameter. Note that this
will break existing 4th scripts that use fopen. Thus, the loader
version has been bumped and loader.4th has been changed to check for a
sufficient version on i386 and alpha. Be sure that you either do a full
world build or install or full build and install of sys/boot after this
since loader.old won't work with the new 4th files and vice versa.
PR: kern/32389
Submitted by: Jonathan Mini <mini@haikugeek.com>
Sponsored by: ClickArray, Inc.
This flag adds a pausing utility. When ran with -p, during the kernel
probing phase, the kernel will pause after each line of output.
This pausing can be ended with the '.' key, and is automatically
suspended when entering ddb.
This flag comes in handy at systems without a serial port that either hang
during booting or reser.
Reviewed by: (partly by jlemon)
MFC after: 1 week
On OFW based machines, it is just too confusing having the firmware and
OS loader giving the same prompt. This is a nice compromise that 99% of the
users on non-OFW platforms will probably not even notice.
instead of looping until the disk is full. This kind of failure can
especially happen when a version of awk that doesn't support POSIX
character classes is used.
Submitted by: David Wolfskill <david@catwhisker.org>
- Add S4BIOS sleep implementation. This will works well if MIB
hw.acpi.s4bios is set (and of course BIOS supports it and hibernation
is enabled correctly).
- Add DSDT overriding support which is submitted by takawata originally.
If loader tunable acpi_dsdt_load="YES" and DSDT file is set to
acpi_dsdt_name (default DSDT file name is /boot/acpi_dsdt.aml),
ACPI CA core loads DSDT from given file rather than BIOS memory block.
DSDT file can be generated by iasl in ports/devel/acpicatools/.
- Add new files so that we can add our proposed additional code to Intel
ACPI CA into these files temporary. They will be removed when
similar code is added into ACPI CA officially.
no emulation mode. Unlike other BIOS devices, this device uses 2048 byte
sectors. Also, the bioscd driver does not have to worry about slices
or partitions.
etc. The only bit of debugging left is performing dual output to both
the screen and COM1. Also, the twiddle is still disabled since it seems
to do weird things to the serial dump. cdboot now has 880 bytes to spare.
to the El Torito standard for CD booting, a CD may boot in "No emulation"
mode without using a floppy image. In this mode, the BIOS loads a program
off of the CD into memory and creates a BIOS device using 2048 byte sectors
for the CD. According to the standard, this program can be up to 0xFFFF
virtual (512-byte) sectors long. The old cdldr depended on this by having
the BIOS load the entire loader and the small cdldr stub as one binary
similar to pxeboot so that cdldr didn't have to read the CD to find the
loader. However, the NT no emulation loader just uses 1 disk sector
(4 virtual sectors), so it seems that at least some BIOS writers just did
enough to get NT to boot by only loading 1 sector and ignoring the sector
count. Thus, while cdldr should have worked in theory, it doesn't in
practice. This replacment fits entirely in 1 sector and includes simple
ISO 9660 support. It looks for /boot/loader on the CD and loads it up
using the BIOS. This allows us to not have to depend on the limited size
of floppy images but use a full GENERIC kernel for CD-ROM installs in the
future, among other things.
This version of cdboot is a bit bloated as it includes some useful
debugging routines that people can pull to use in other x86 assembly
modules. Even with all the debugging cruft, we still have 272 bytes to
spare.
devices in 'lsdev' output rather than printing out a pointer to the
print function since the user really could care less about the pointer
value. Perhaps this was intended to be a debugging printf?
when debugging boot problems. It is not on by default but is enabled via
the BTX_SERIAL variable. The port and speed can be set via the same
variables used by boot2 and the loader.
