That is required to support reboot -r with a new root filesystem being
on an already imported pool.
PR: 210721
Reported by: Jan Bramkamp <crest_maintainer@rlwinm.de>
MFC after: 2 weeks
The description is FreeBSD-specific and was added in r266497
to fix PR189865.
PR: 220825
Submitted by: Fabian Keil
Obtained from: ElectroBSD
MFC after: 1 week
I overlooked the fact that vdev_op_io_done hook is called even if the
actual I/O is skipped, for example, in the case of a missing vdev.
Arguably, this could be considered an issue in the zio pipeline engine,
but for now I am adding defensive code to check for io_bp being NULL
along with assertions that that happens only when it can be really
expected.
PR: 220691
Reported by: peter, cy
Tested by: cy
MFC after: 1 week
X-MFC with: r320156, r320452
ZPL_VERSION is unsigned long long, not an int. With this change, a zpool can be
created on a 32-bit system (tested on powerpcspe) and mounted correctly.
Reviewed by: allanjude
The implementation of ZFS refcount_t uses the emulated illumos mutex
(the sx lock) and the waiting memory allocation when ZFS_DEBUG is
enabled. This makes refcount_t unsuitable for use in GEOM g_up
thread where sleeping is prohibited.
When importing the ABD change I modified vdev_geom using illumos
vdev_disk as an example. As a result, I added a call to abd_return_buf
in vdev_geom_io_intr. The latter is called on g_up thread while the
former uses refcount_t.
This change fixes the problem by deferring the abd_return_buf call to
the previously unused vdev_geom_io_done that is called on a ZFS zio
taskqueue thread where sleeping is allowed.
A side bonus of this change is that now a vdev zio has a pointer
to its corresponding bio while the zio is active.
Reported by: Shawn Webb <shawn.webb@hardenedbsd.org>
Tested by: Shawn Webb <shawn.webb@hardenedbsd.org>
MFC after: 1 week
X-MFC with: r320156
3306 zdb should be able to issue reads in parallel
illumos/illumos-gate/31d7e8fa33fae995f558673adb22641b5aa8b6e1
https://www.illumos.org/issues/3306
The upstream change was made before we started to import upstream commits
individually. It was imported into the illumos vendor area as r242733.
That commit was MFV-ed in r260138, but as the commit message says
vdev_file.c was left intact.
This commit actually implements the parallel I/O for vdev_file using a
taskqueue with multiple thread. This implementation does not depend on
the illumos or FreeBSD bio interface at all, but uses zio_t to pass
around all the relevent data. So, the code looks a bit different from
the upstream.
This commit also incorporates ZoL commit
zfsonlinux/zfs/bc25c9325b0e5ced897b9820dad239539d561ec9 that fixed
https://github.com/zfsonlinux/zfs/issues/2270
We need to use a dedicated taskqueue for exactly the same reason as ZoL
as we do not implement TASKQ_DYNAMIC.
Obtained from: illumos, ZFS on Linux
MFC after: 2 weeks
FreeBSD note: the actual change has been in FreeBSD since r297848. This
commit accounts for integration of that change with subsequent changes,
especially r320156 (MFV of r318946) and r314274.
illumos/illumos-gate@403a8da73c403a8da73chttps://www.illumos.org/issues/5220
There are disk devices that have logical sector size larger than 512B, for
example 4KB. That is, their physical sector size is larger than 512B and they
do not provide emulation for 512B sector sizes. For such devices both a data
offset and a data size must be properly aligned. L2ARC should arrange that
because it uses physical I/O.
zio_vdev_io_start() performs a necessary transformation if io_size is not
aligned to vdev_ashift, but that is done only for logical I/O. Something
similar should be done in L2ARC code.
* a temporary write buffer should be allocated if the original buffer is
not going to be compressed and its size is not aligned
* size of a temporary compression buffer should be ashift aligned
* for the reads, if a size of a target buffer is not sufficiently large and
it is not aligned then a temporary read buffer should be allocated
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 3 weeks
illumos/illumos-gate@0255edcc850255edcc85https://www.illumos.org/issues/8056
The send size estimate for a zvol can be too low, if the size of the record
headers (dmu_replay_record_t's) is a significant portion of the size.
This is typically the case when the data is highly compressible, especially
with embedded blocks.
The problem is that dmu_adjust_send_estimate_for_indirects() assumes that
blocks are the size of the "recordsize" property (128KB).
However, for zvols, the blocks are the size of the "volblocksize" property
(8KB). Therefore, we estimate that there will be 16x less record headers than
there really will be.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
MFC after: 3 weeks
FreeBSD note: this commit removes small differences between what mav
committed to FreeBSD in r308782 and what ended up committed to illumos
after addressing all review comments.
illumos/illumos-gate@c5ee46810fc5ee46810fhttps://www.illumos.org/issues/7578
After some ZIL changes 6 years ago zil_slog_limit got partially broken
due to zl_itx_list_sz not updated when async itx'es upgraded to sync.
Actually because of other changes about that time zl_itx_list_sz is not
really required to implement the functionality, so this patch removes
some unneeded broken code and variables.
Original idea of zil_slog_limit was to reduce chance of SLOG abuse by
single heavy logger, that increased latency for other (more latency critical)
loggers, by pushing heavy log out into the main pool instead of SLOG. Beside
huge latency increase for heavy writers, this implementation caused double
write of all data, since the log records were explicitly prepared for SLOG.
Since we now have I/O scheduler, I've found it can be much more efficient
to reduce priority of heavy logger SLOG writes from ZIO_PRIORITY_SYNC_WRITE
to ZIO_PRIORITY_ASYNC_WRITE, while still leave them on SLOG.
Existing ZIL implementation had problem with space efficiency when it
has to write large chunks of data into log blocks of limited size. In some
cases efficiency stopped to almost as low as 50%. In case of ZIL stored on
spinning rust, that also reduced log write speed in half, since head had to
uselessly fly over allocated but not written areas. This change improves
the situation by offloading problematic operations from z*_log_write() to
zil_lwb_commit(), which knows real situation of log blocks allocation and
can split large requests into pieces much more efficiently. Also as side
effect it removes one of two data copy operations done by ZIL code WR_COPIED
case.
While there, untangle and unify code of z*_log_write() functions.
Also zfs_log_write() alike to zvol_log_write() can now handle writes crossing
block boundary, that may also improve efficiency if ZPL is made to do that.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Steven Hartland <steven.hartland@multiplay.co.uk>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Richard Elling <Richard.Elling@RichardElling.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Alexander Motin <mav@FreeBSD.org>
MFC after: 3 weeks
All of the problems were related to the FreeBSD-only features.
One was caused by a mismerge in the zfsbootcfg support code.
All others were in the TRIM support code.
MFC after: 1 week
X-MFC with: r320156
All of the problems were related to the FreeBSD-only features.
One was caused by a mismerge in the zfsbootcfg support code.
All others were in the TRIM support code.
Reported by: ken,
O. Hartmann <ohartmann@walstatt.org>,
Trond Endrestøl <Trond.Endrestol@fagskolen.gjovik.no>
MFC after: 1 week
X-MFC with: r320156
illumos/illumos-gate@770499e185770499e185https://www.illumos.org/issues/8021
The ARC buf data project (known simply as "ABD" since its genesis in the ZoL
community) changes the way the ARC allocates `b_pdata` memory from using linear
`void *` buffers to using scatter/gather lists of fixed-size 1KB chunks. This
improves ZFS's performance by helping to defragment the address space occupied
by the ARC, in particular for cases where compressed ARC is enabled. It could
also ease future work to allocate pages directly from `segkpm` for minimal-
overhead memory allocations, bypassing the `kmem` subsystem.
This is essentially the same change as the one which recently landed in ZFS on
Linux, although they made some platform-specific changes while adapting this
work to their codebase:
1. Implemented the equivalent of the `segkpm` suggestion for future work
mentioned above to bypass issues that they've had with the Linux kernel memory
allocator.
2. Changed the internal representation of the ABD's scatter/gather list so it
could be used to pass I/O directly into Linux block device drivers. (This
feature is not available in the illumos block device interface yet.)
FreeBSD notes:
- the actual (default) chunk size is 4KB (despite the text above saying 1KB)
- we can try to reimplement ABDs, so that they are not permanently
mapped into the KVA unless explicitly requested, especially on
platforms with scarce KVA
- we can try to use unmapped I/O and avoid intermediate allocation of a
linear, virtual memory mapped buffer
- we can try to avoid extra data copying by referring to chunks / pages
in the original ABD
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Dan Kimmel <dan.kimmel@delphix.com>
MFC after: 3 weeks
I think that the change is still good, but reconciling it with a planned
merge of the ARC buf data scatter-ization is a bit more tedious
than I can handle.
MFC after: 17 days
illumos/illumos-gate@2889ec41c02889ec41c0https://www.illumos.org/issues/8311
Description:
There was a misunderstanding about the enforcement details of the "Read-only"
flag introduced for SMB/CIFS compatibility, way back in 2007 in the Sun PSARC
2007/315 case.
The original authors thought enforcement of the READONLY flag should work
similarly as the IMMUTABLE flag. Unfortunately, that enforcement is
incompatible with the expectations of Windows applications using this feature
through the SMB service. Applications assume (and the MS File System Algorithms
MS-FSA confirms they should) that an SMB client can:
(a) Open an SMB handle on a file with read/write access,
(b) Set the DOS attributes to include the READONLY flag,
(c) continue to have write access via that handle.
This access model is essentially the same as a Unix/POSIX application that
creates a file (with read/write access), uses fchmod() to change the file mode
to something not granting write access (i.e. 0444), and then continues to write
that file using the open handle it got before the mode change.
Currently, the SMB server works-around this problem in a way that will become
difficult to maintain as we implement support for SMB3 persistent handles, so
SMB depends on this fix.
I've written a test program that can be used to demonstrate this problem, and
added it to zfs-tests (tests/functional/acl/cifs/cifs_attr_004_pos).
It currently fails, but will pass when this problem fixed.
Steps to Reproduce:
Run the test program on a ZFS file system.
Expected Results:
Pass
Actual Results:
Fail.
Reviewed by: Sanjay Nadkarni <sanjay.nadkarni@nexenta.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Prakash Surya <prakash.surya@delphix.com>
Author: Gordon Ross <gwr@nexenta.com>
MFC after: 2 weeks
illumos/illumos-gate@4585130b254585130b25https://www.illumos.org/issues/5428
Most of the upstream change is not applicable to FreeBSD.
Only the renaming of strtonum to zfs_strtonum is relevant to us.
And we already had it partially done.
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Joshua M. Clulow <josh@sysmgr.org>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
MFC after: 1 week
illumos/illumos-gate@a4b8c9aa65a4b8c9aa65https://www.illumos.org/issues/8264
Oddly there is a lzc_clone function, but no lzc_promote function.
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@kebe.com>
Approved by: Dan McDonald <danmcd@kebe.com>
Author: Andrew Stormont <astormont@racktopsystems.com>
MFC after: 1 week
Close a potential race in reading the CPU dtrace flags, where a thread can
start on one CPU, and partway through retrieving the flags be swapped out,
while another thread traps and sets the CPU_DTRACE_NOFAULT. This could
cause the first thread to return without handling the fault.
Discussed with: markj@
illumos/illumos-gate@dbfd9f9300dbfd9f9300https://www.illumos.org/issues/8156
dbuf_evict_notify() holds the dbuf_evict_lock while checking if it should do
the eviction itself (because the evict thread is not able to keep up).
This can result in massive lock contention.
It isn't necessary to hold the lock, because if we make the wrong choice
occasionally, nothing bad will happen.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 1 week
illumos/illumos-gate@5b062782535b06278253https://www.illumos.org/issues/8005
RAID-Z requires that space be allocated in multiples of P+1 sectors,
because this is the minimum size block that can have the required amount
of parity. Thus blocks on RAIDZ1 must be allocated in a multiple of 2
sectors; on RAIDZ2 multiple of 3; and on RAIDZ3 multiple of 4. A sector
is a unit of 2^ashift bytes, typically 512B or 4KB.
To satisfy this constraint, the allocation size is rounded up to the
proper multiple, resulting in up to 3 "pad sectors" at the end of some
blocks. The contents of these pad sectors are not used, so we do not
need to read or write these sectors. However, some storage hardware
performs much worse (around 1/2 as fast) on mostly-contiguous writes
when there are small gaps of non-overwritten data between the writes.
Therefore, ZFS creates "optional" zio's when writing RAID-Z blocks that
include pad sectors. If writing a pad sector will fill the gap between
two (required) writes, we will issue the optional zio, thus doubling
performance. The gap-filling performance improvement was introduced in
July 2009.
Writing the optional zio is done by the io aggregation code in
vdev_queue.c. The problem is that it is also subject to the limit on
the size of aggregate writes, zfs_vdev_aggregation_limit, which is by
default 128KB. For a given block, if the amount of data plus padding
written to a leaf device exceeds zfs_vdev_aggregation_limit, the
optional zio will not be written, resulting in a ~2x performance
degradation.
The problem occurs only for certain values of ashift, compressed block
size, and RAID-Z configuration (number of parity and data disks). It
cannot occur with the default recordsize=128KB. If compression is
enabled, all configurations with recordsize=1MB or larger will be
impacted to some degree.
The problem notably occurs with recordsize=1MB, compression=off, with 10
disks in a RAIDZ2 or RAIDZ3 group (with 512B or 4KB sectors). Therefore
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 10 days
illumos/illumos-gate@adaec86ad2adaec86ad2https://www.illumos.org/issues/8155
When writing pre-compressed buffers, arc_write() requires that the compression
algorithm used to compress the buffer matches the compression algorithm
requested by the zio_prop_t, which is set by dmu_write_policy().
This makes dmu_write_policy() and its callers a bit more complicated.
We can simplify this by making arc_write() trust the caller to supply the type
of pre-compressed buffer that it wants to write, and override the compression
setting in the zio_prop_t.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 10 days
When a parent directory lookup is done at the root of a snapshot mounted
under .zfs/snapshot directory, we need to look up that directory in
the parent filesystem. We achieve that by doing a VOP_LOOKUP operation
on a .zfs vnode with "snapshot" as a target name. But previously we
also passed ISDOTDOT flag to the lookup and, because of that, the lookup
actually returned the parent of the .zfs vnode, that is, a root vnode of
the parent filesystem.
Reported by: lev
Tested by: lev
MFC after: 3 days
Since ino64 expanded dev_t to 64bit, make VOP_GETATTR(9) provide all
bits of mnt_stat.f_fsid as va_fsid for vnodes on filesystems which use
f_fsid. In particular, NFSv3 and sometimes NFSv4, and ZFS use this
method or reporting st_dev by stat(2).
Provide a new helper vn_fsid() to avoid duplicating code to copy
f_fsid to va_fsid.
Note that the change is mostly cosmetic. Its motivation is to avoid
sign-extension of f_fsid[0] into 64bit dev_t value which happens after
dev_t becomes 64bit..
Reviewed by: avg(zfs), rmacklem (nfs) (both for previous version)
Sponsored by: The FreeBSD Foundation
illumos/illumos-gate@bc83969fdbbc83969fdbhttps://www.illumos.org/issues/8265
Reserve bit 23 in the zfs send stream flags for the large
dnode feature which has been implemented for Linux.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Brian Behlendorf <behlendorf1@llnl.gov>
MFC after: 1 week
illumos/illumos-gate@2d2f193a212d2f193a21https://www.illumos.org/issues/8166
If we do a scrub while a leaf device is offline (via "zpool offline"),
we will inadvertently clear the DTL (dirty time log) of the offline
device, even though it is still damaged. When the device comes back
online, we will incompletely resilver it, thinking that the scrub
repaired blocks written before the scrub was started. The incomplete
resilver can lead to data loss if there is a subsequent failure of a
different leaf device.
The fix is to never clear the DTL of offline devices. Note that if a
device is onlined while a scrub is in progress, the scrub will be
restarted.
The problem can be worked around by running "zpool scrub" after
"zpool online".
See also https://github.com/zfsonlinux/zfs/issues/5806
Reviewed by: George Wilson george.wilson@delphix.com
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Matthew Ahrens <mahrens@delphix.com>
illumos/illumos-gate@40713f2b2440713f2b24https://www.illumos.org/issues/8070
Add some ZFS comments left by various developers at different times
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Alan Somers <asomers@gmail.com>
MFC after: 1 week
illumos/illumos-gate@b7b2590dd9b7b2590dd9https://www.illumos.org/issues/8063
A standard practice in ZFS is to keep track of "per-txg" state. Any of
the 3 active TXG's (open, quiescing, syncing) can have different values
for this state. We should assert that we do not attempt to modify other
(inactive) TXG's.
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@5f368aef865f368aef86https://www.illumos.org/issues/7786
Currently, vdev_online() will only post sysevent if previous state was
"offline". It should also post the event when the state changes from "removed"
or "faulted" to "healthy" or "degraded".
This will fix the following scenario:
- pull disk from slot A
- check that hotspare has taken its place (if available)
- insert disk into slot B
- check that hotspare moved back to "avail" state (if spare was used)
The problem here is that we don't get any ESC_ZFS_VDEV_* notification and fail
to update the vdev FRU.
Reviewed by: Matthew Ahrens mahrens@delphix.com
Reviewed by: George Wilson george.wilson@delphix.com
Approved by: Albert Lee <trisk@forkgnu.org>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
MFC after: 1 week
illumos/illumos-gate@def4fac588def4fac588https://www.illumos.org/issues/8025
dbuf_read() creates a zio_root() to track and wait for all the zio's
that may happen as part of this call. However, if the blkptr_t for
this buffer is NULL or a hole, we will not create any more zio's, so
this zio_root() is unnecessary. This is always the case when calling
dbuf_read() on a bonus buffer, because it has no blkptr (it's part of
the containing dnode). For workloads that read a lot of bonus buffers
(e.g. file creation and removal), creating and destroying these
unnecessary zio's can decrease performance by around 3%.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Prashanth Sreenivasa <pks@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
All the differences in calculations are kept.
A comment about arc_max being 1/2 of all memory is fixed to reflect the
actual code that uses 5/8 as a factor.
MFC after: 1 week
illumos/illumos-gate@0c94e1af670c94e1af67https://www.illumos.org/issues/7256
error = dmu_sync(zio, lr->lr_common.lrc_txg,
zfs_get_done, zgd);
ASSERT(error || lr->lr_length <= zp->z_blksz);
It's possible, although extremely rare, that the zfs_get_done() callback is
executed before dmu_sync() returns.
In that case the znode's range lock is dropped and the znode is unreferenced.
Thus, the assertion can access some invalid or wrong data via the zp pointer.
size variable caches the correct value of z_blksz and can be safely used here.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <andriy.gapon@clusterhq.com>
MFC after: 1 week
illumos/illumos-gate@7f0bdb42577f0bdb4257https://www.illumos.org/issues/8061
sa_find_idx_tab() is declared as taking and returning "void *" parameters.
These can be declared to be the specific types.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 1 week
illumos/illumos-gate@b127fe3c05b127fe3c05https://www.illumos.org/issues/6101
lzc_create(), or more correctly, zfs_ioc_create() does not reject an attempt to
create a filesystem as a child of a volume, instead it proceeds to a crash.
A crash stack obtained on FreeBSD:
page fault while in kernel mode
zap_leaf_lookup()
fzap_lookup()
zap_lookup_norm()
zap_lookup()
zfs_get_zplprop()
zfs_fill_zplprops_impl()
zfs_ioc_create()
zfsdev_ioctl()
devfs_ioctl_f()
kern_ioctl()
sys_ioctl()
This crash happened with a kernel without debugging assertions.
The immediate cause of crash appears to an attempt to interpret a zvol object
as a zap object.
For filesystems:
#define MASTER_NODE_OBJ 1
For zvols:
#define ZVOL_OBJ 1ULL
#define ZVOL_ZAP_OBJ 2ULL
So, I see two problems here:
1. an attempt to create a filesystem under a zvol should be rejected as
early as possible, maybe in zfs_fill_zplprops()
2. maybe zap_lookup / zap_lockdir should reject objects that are not of one
of the zap object types
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 2 weeks
illumos/illumos-gate@6b036259816b03625981https://www.illumos.org/issues/8026
zfs_throttle_delay and zfs_throttle_resolution became disused since the new
write throttling mechanism was introduced.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
illumos/illumos-gate@313ae1e182313ae1e182https://www.illumos.org/issues/8027
dsl_pool_dirty_delta() should not wake up waiters when dp->dp_dirty_total ==
zfs_dirty_data_max, because they wait for dp_dirty_total to fall strictly below
the threshold.
It's probably very rare for that condition to occur, but it's better to have
more accurate code.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
illumos/illumos-gate@94c2d0eb2294c2d0eb22https://www.illumos.org/issues/7968
spa_sync() iterates over all the dirty dnodes and processes each of them by
calling dnode_sync(). If there are many dirty dnodes (e.g. because we created
or removed a lot of files), the single thread of spa_sync() calling
dnode_sync() can become a bottleneck. Additionally, if many dnodes are dirtied
concurrently in open context (e.g. due to concurrent file creation), the
os_lock will experience lock contention via dnode_setdirty().
The solution is to track dirty dnodes on a multilist_t, and for spa_sync() to
use separate threads to process each of the sublists in the multilist.
On the concurrent file creation microbenchmark, the performance improvement
from dnode_setdirty() is up to 7%. Additionally, the wall clock time spent in
spa_sync() is reduced to 15%-40% of the single-threaded case. In terms of cost/
reward, once the other bottlenecks are addressed, fixing this bug will provide
a medium-large performance gain and require a medium amount of effort to
implement.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@10fbdecb0510fbdecb05https://www.illumos.org/issues/7970
The global tunable zfs_arc_num_sublists_per_state is used by the ARC and
the dbuf cache, and other users are planned. We should change this
tunable to be common to all multilists.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@b0c42cd470b0c42cd470https://www.illumos.org/issues/7801
Add *_by_dnode() routines for accessing objects given their
dnode_t *, this is more efficient than accessing the object by
(objset_t *, uint64_t object). This change converts some but
not all of the existing consumers. As performance-sensitive
code paths are discovered they should be converted to use
these routines.
Ported from: 0eef1bde31
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: bzzz77 <bzzz.tomas@gmail.com>
MFC after: 24 days
illumos/illumos-gate@a3905a4592a3905a4592https://www.illumos.org/issues/7869
The issue fixed by this patch is a race condition in the deadlist code.
A thread executing an administrative command that uses
`dsl_deadlist_space_range()` holds the lock of the whole `deadlist_t` to
protect the access of all its entries that the deadlist contains in an
avl tree.
Sync threads trying to insert a new entry in the deadlist
(through `dsl_deadlist_insert()` -> `dle_enqueue()`) do not hold the
deadlist lock at that moment. If the `dle_bpobj` is the empty bpobj (our
sentinel value), we close and reopen it. Between these two operations,
it is possible for the `dsl_deadlist_space_range()` thread to dereference
that bpobj which is `NULL` during that window.
Threads should hold the a deadlist's `dl_lock` when they manipulate its
internal data so scenarios like the one above are avoided. In addition,
threads should also hold the bpobj lock whenever they are allocating the
subobj list of a bpobj, and not just when they actually insert the subobj
to the list. This way we can avoid potential memory leaks.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@61e255ce7261e255ce72https://www.illumos.org/issues/7793
Background information: This assertion about tx_space_* verifies that we
are not dirtying more stuff than we thought we would. We “need” to know
how much we will dirty so that we can check if we should fail this
transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the
transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() —
typically less than a millisecond), we call dbuf_dirty() on the exact
blocks that will be modified. Once this happens, the temporary
accounting in tx_space_* is unnecessary, because we know exactly what
blocks are newly dirtied; we call dnode_willuse_space() to track this
more exact accounting.
The fundamental problem causing this bug is that dmu_tx_hold_*() relies
on the current state in the DMU (e.g. dn_nlevels) to predict how much
will be dirtied by this transaction, but this state can change before we
actually perform the transaction (i.e. call dbuf_dirty()).
This bug will be fixed by removing the assertion that the tx_space_*
accounting is perfectly accurate (i.e. we never dirty more than was
predicted by dmu_tx_hold_*()). By removing the requirement that this
accounting be perfectly accurate, we can also vastly simplify it, e.g.
removing most of the logic in dmu_tx_count_*().
The new tx space accounting will be very approximate, and may be more or
less than what is actually dirtied. It will still be used to determine
if this transaction will put us over quota. Transactions that are marked
by dmu_tx_mark_netfree() will be excepted from this check. We won’t make
an attempt to determine how much space will be freed by the transaction
— this was rarely accurate enough to determine if a transaction should
be permitted when we are over quota, which is why dmu_tx_mark_netfree()
was introduced in 2014.
We also won’t attempt to give “credit” when overwriting existing blocks,
if those blocks may be freed. This allows us to remove the
do_free_accounting logic in dbuf_dirty(), and associated routines. This
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@1c17160ac51c17160ac5https://www.illumos.org/issues/1300
FreeBSD note: recent FreeBSD was not affected by the issue fixed as the
name cache is completely bypassed when normalization is enabled.
The change is imported for the sake of ZAP infrastructure modifications.
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Kevin Crowe <kevin.crowe@nexenta.com>
MFC after: 3 weeks
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
The idle thread may process callouts while reloading the timer in
cpu_activeclock(). In this case, provide a representative value, &cpu_idle,
instead of 0 for args[0] so that the active thread can be more easily
identified from the probe.
This addresses intermittent failures of the profile-n/tst.argtest.d test.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D10651
vdev_geom.c currently uses the g_consumer's private field to point to a
vdev_t. That way, a GEOM event can cause a change to a ZFS vdev. For
example, when you remove a disk, the vdev's status will change to REMOVED.
However, vdev_geom will sometimes attach multiple vdevs to the same GEOM
consumer. If this happens, then geom events will only be propagated to one
of the vdevs.
Fix this by storing a linked list of vdevs in g_consumer's private field.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c
* g_consumer.private now stores a linked list of vdev pointers associated
with the consumer instead of just a single vdev pointer.
* Change vdev_geom_set_physpath's signature to more closely match
vdev_geom_set_rotation_rate
* Don't bother calling g_access in vdev_geom_set_physpath. It's guaranteed
that we've already accessed the consumer by the time we get here.
* Don't call vdev_geom_set_physpath in vdev_geom_attach. Instead, call it
in vdev_geom_open, after we know that the open has succeeded.
PR: 218634
Reviewed by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D10391
The current method only sort of works, and usually doesn't work reliably.
Also, on Book-E the return address from DEBUG exceptions is not the sentinel
addresses, so it won't exit the loop correctly.
Fix this by better handling trap frames during unwinding, and using the
common trap handler for debug traps, as the code in that segment is
identical between the two.
MFC after: 1 week
r314370 changed EXC_DTRACE to a different instruction, but neglected to
make the same change to fbt, so dtrace didn't actually pick it up,
resulting in entering KDB instead of trapping for dtrace.
MFC after: 1 week
