When trapping on a wrote access to a buffer the kernel has mapped as write
only we should only pass the VM_PROT_WRITE flag. Previously the call to
vm_fault_trap as the VM_PROT_READ flag was unexpected.
Reported by: manu
Sponsored by: Innovate UK
There's a know issue where new group members don't get the 'set skip on'
applied until the rules are re-loaded.
Do this by setting rules that block all traffic, but skip members of the
'epair' group. If we can communicate over the epair interface we know the set
skip rule took effect, even if the rule was set before the interface was
created.
MFC after: 2 weeks
sys.capsicum.functional.Capability__NoBypassDAC
sys.capsicum.functional.Pdfork__OtherUserForked
PR: 250178, 250179
Sponsored by: The FreeBSD Foundation
This leaves the main test body untouched and only skip running in the CI env,
makes doing local test easier while developing.
PR: 244165
Sponsored by: The FreeBSD Foundation
sys.capsicum.functional.ForkedOpenatTest_WithFlagInCapabilityMode___
sys.capsicum.functional.OpenatTest__WithFlag
PR: 249960
Sponsored by: The FreeBSD Foundation
Add a wrapping script to use ATF to run tests written with Googletest
one by one. This helps locating and tracking the failing case in CI easier.
This is a temporarily solution while Googletest support in Kyua is developing.
We will revert this once Kyua+Googletest integration is ready.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25896
This is a workaround for the current continuously failing test case
sys.kern.sonewconn_overflow.sonewconn_overflow_01
The side effect is the dmesg buffer got cleared and may effect other tests
depends on dmesg output running in parallel. The better solution would be
tailing the log file like /var/log/debug.log
Sponsored by: The FreeBSD Foundation
Nexthop lookup was not consireding rt_flags when doing
structure comparison, which lead to an original nexthop
selection when changing flags. Fix the case by adding
rt_flags field into comparison and rearranging nhop_priv
fields to allow for efficient matching.
Fix `route change X/Y flags` case - recent changes
disallowed specifying RTF_GATEWAY flag without actual gateway.
It turns out, route(8) fills in RTF_GATEWAY by default, unless
-interface flag is specified. Fix regression by clearing
RTF_GATEWAY flag instead of failing.
Fix route flag reporting in RTM_CHANGE messages by explicitly
updating rtm_flags after operation competion.
Add IPv4/IPv6 tests for flag-only route changes.
Repeating the default WARNS here makes it slightly more difficult to
experiment with default WARNS changes, e.g. if we did something absolutely
bananas and introduced a WARNS=7 and wanted to try lifting the default to
that.
Drop most of them; there is one in the blake2 kernel module, but I suspect
it should be dropped -- the default WARNS in the rest of the build doesn't
currently apply to kernel modules, and I haven't put too much thought into
whether it makes sense to make it so.
many sockets in TIME_WAIT state at the end of the test.
PR: 249885
Reviewed by: markj
Approved by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D26549
If a FUSE server returns FOPEN_DIRECT_IO in response to FUSE_OPEN, that
instructs the kernel to bypass the page cache for that file. This feature
is also known by libfuse's name: "direct_io".
However, when accessing a file via mmap, there is no possible way to bypass
the cache completely. This change fixes a deadlock that would happen when
an mmap'd write tried to invalidate a portion of the cache, wrongly assuming
that a write couldn't possibly come from cache if direct_io were set.
Arguably, we could instead disable mmap for files with FOPEN_DIRECT_IO set.
But allowing it is less likely to cause user complaints, and is more in
keeping with the spirit of open(2), where O_DIRECT instructs the kernel to
"reduce", not "eliminate" cache effects.
PR: 247276
Reported by: trapexit@spawn.link
Reviewed by: cem
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D26485
memfd_create is implemented on top of posixshm, so this is a logically
correct place for them to be. Moreover, this reduces the number of places to
look to run tests when working in this part of the tree.
Discussed with: kib (to some extent, a while ago)
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
Use MACHINE_CPUARCH with arm64 (aarch64) when we build code that could run
on any 64-bit Arm instruction set. This will simplify checks in downstream
consumers targeting prototype instruction sets.
The only place we check for MACHINE_ARCH == aarch64 is when building the
device tree blobs. As these are targeting current generation ISAs.
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D26370
Main part is that kern_copyin on amd64 after LA57 should query the top
of UVA for correct operations. In fact it should started doing that
after the workaround for AMD bug with IRET in the last user page was
fixed by reducing UVA by a page.
Also since we started calculating top of UVA, fix MIPS according to
the comment.
Reported by: lwhsu
PR: 248933
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D26312
Messing with gnop devices under a zpool fails in this test, causing
the pool to be suspended and eventually the system to deadlock.
Skip the test for now until the issue is resolved.
PR: tests/248910
Discussed with: lwhsu
Sponsored by: iXsystems, Inc.
The primary benefit is maintaining a completely shared
code base with the community allowing FreeBSD to receive
new features sooner and with less effort.
I would advise against doing 'zpool upgrade'
or creating indispensable pools using new
features until this change has had a month+
to soak.
Work on merging FreeBSD support in to what was
at the time "ZFS on Linux" began in August 2018.
I first publicly proposed transitioning FreeBSD
to (new) OpenZFS on December 18th, 2018. FreeBSD
support in OpenZFS was finally completed in December
2019. A CFT for downstreaming OpenZFS support in
to FreeBSD was first issued on July 8th. All issues
that were reported have been addressed or, for
a couple of less critical matters there are
pull requests in progress with OpenZFS. iXsystems
has tested and dogfooded extensively internally.
The TrueNAS 12 release is based on OpenZFS with
some additional features that have not yet made
it upstream.
Improvements include:
project quotas, encrypted datasets,
allocation classes, vectorized raidz,
vectorized checksums, various command line
improvements, zstd compression.
Thanks to those who have helped along the way:
Ryan Moeller, Allan Jude, Zack Welch, and many
others.
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25872
RTF_HOST indicates whether route is a host route
(netmask is empty or /{32,128}).
Check that if netmask is empty and host route is not specified, kernel
returns an error.
Differential Revision: https://reviews.freebsd.org/D26155
Thanks to r364064, the name cache now returns a hit where previously it
would miss. Adjust the expectations accordingly.
PR: 248583
Reported by: lwhsu
MFC with: r364064
This fixes possible link errors, similar to:
ld: error: undefined symbol: iface_setup_addr
>>> referenced by test_rtsock_l3.c:111 (tests/sys/net/routing/test_rtsock_l3.c:111)
>>> test_rtsock_l3.o:(presetup_ipv4)
>>> referenced by test_rtsock_l3.c:79 (tests/sys/net/routing/test_rtsock_l3.c:79)
>>> test_rtsock_l3.o:(presetup_ipv6)
>>> referenced by test_rtsock_l3.c:512 (tests/sys/net/routing/test_rtsock_l3.c:512)
>>> test_rtsock_l3.o:(atfu_rtm_change_v4_gw_success_body)
>>> referenced 10 more times
In C (not C++), 'naked' inline is almost always a mistake. Either use
static inline (this is appropriate for most cases), or extern inline.
MFC after: 3 days
This avoids injecting errors into the test system's mirrors.
gnop seems like a good solution here but it injects errors at the wrong
place vs where these tests expect and does not support a 'max global count'
like the failpoints do with 'n*' syntax.
Reviewed by: cem, vangyzen
Sponsored by: Dell EMC Isilon
Prior to this change a `SF_IMMUTABLE` chflagsat(2)'ed file (`path`) was left
behind, which sabotaged kyua(1) from being able to clean up the work directory,
This resulted in unnecessary work for folks having to clean up the work
directory on non-disposable systems, which defaults to `/tmp`. Use `UF_OFFLINE`
instead of `SF_IMMUTABLE`, in part because setting `SF_IMMUTABLE` isn't relevant
to the test and `SF_IMMUTABLE` cannot be cleared at all securelevels, as pointed
out by @asomers.
Additional work is required to catch cases like this upfront in the future to
avoid tester headache. See PR # 247765 for more details/followup.
Suggested by: asomers
Reviewed By: asomers, #tests
MFC after: 1 week
PR: 247761
Sponsored by: DellEMC
Differential Revision: https://reviews.freebsd.org/D25561
memfd_create fds will no longer require an ftruncate(2) to set the size;
they'll grow (to the extent that it's possible) upon write(2)-like syscalls.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25502
geli does all of its crypto operations in a separate thread pool, so
g_eli_start, g_eli_read_done, and g_eli_write_done don't actually do very
much work. Enabling direct dispatch eliminates the g_up/g_down bottlenecks,
doubling IOPs on my system. This change does not affect the thread pool.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25587
This test should no longer provoke large amounts of traffic, which can
overwhelm single-core systems, preventing them from making progress in the
tests.
The test can now be re-enabled.
PR: 246448
Enable STP before bringing the bridges up. This avoids a switching loop,
which has a tendency to drown out progress in userspace processes,
especially on single-core systems.
Only check that we have indeed shut down one of the looped interfaces
PR: 246448
Reviewed by: melifaro
Differential Revision: https://reviews.freebsd.org/D25084
Fix the netinet/netinet6 divert tests falsely reporting 'ipdivert module is
not loaded' when the divert module is built into the kernel
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D25026
This patch fixes two issues relating to FUSE_ACCESS when the
default_permissions mount option is disabled:
* VOP_ACCESS() calls with VADMIN set should never be sent to a fuse server
in the form of FUSE_ACCESS operations. The FUSE protocol has no equivalent
of VADMIN, so we must evaluate such things kernel-side, regardless of the
default_permissions setting.
* The FUSE protocol only requires FUSE_ACCESS to be sent for two purposes:
for the access(2) syscall and to check directory permissions for
searchability during lookup. FreeBSD sends it much more frequently, due to
differences between our VFS and Linux's, for which FUSE was designed. But
this patch does eliminate several cases not required by the FUSE protocol:
* for any FUSE_*XATTR operation
* when creating a new file
* when deleting a file
* when setting timestamps, such as by utimensat(2).
* Additionally, when default_permissions is disabled, this patch removes one
FUSE_GETATTR operation when deleting a file.
PR: 245689
Reported by: MooseFS FreeBSD Team <freebsd@moosefs.pro>
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24777
