Even if sigfastblock block is non-zero, non-blockable signals must be
checked on ast and delivered now. This also affects debugger ability
to attach, because issignal() also calls ptracestop() if there is
a pending stop for debugee.
Instead of checking for sigfastblock, and either setting PENDING flag
for usermode or doing signal delivery loop, always do the loop after
checking, and then handle PENDING bit. issignal() already does the right
thing for fast-blocked case, allowing only STOPs and SIGKILL delivery to
happen.
Reported by: Vasily Postnicov <shamaz.mazum@gmail.com>, markj
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28089
User pending bit should not be set if kernel did not noted a pending signal.
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28089
Previously, we would accept any kind of LIO_* opcode, including ones
that were intended for in-kernel use only like LIO_SYNC (which is not
defined in userland). The situation became more serious with
022ca2fc7f. After that revision, setting
aio_lio_opcode to LIO_WRITEV or LIO_READV would trigger an assertion.
Note that POSIX does not specify what should happen if aio_lio_opcode is
invalid.
MFC-with: 022ca2fc7f
Reviewed by: jhb, tmunro, 0mp
Differential Revision: <https://reviews.freebsd.org/D28078
For rate-based resources that support throttling (e.g.
readiops/writeips), this fixes a divide-by-zero panic when rctl(8)
passes 0 as the throttle value. For these resources, treat
zero-throttle requests as requests to suspend forward progress as long
as possible using the duration specified in
kern.racct.rctl.throttle_max.
PR: 251803
Reported by: chris@cretaforce.gr
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27858
After old vmspace is destroyed during execve(2), but before the new space
is fully constructed, an error during image activation cannot be returned
because there is no executing program to receive it.
In the relatively common case of failure to map stack, print some hints
on the control terminal. Note that user has enough knobs to cause stack
mapping error, and this is the most common reason for execve(2) aborting
the process.
Requested by: jhb
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28050
It is checked in vm_map_insert() and vm_map_protect() that PROT_WRITE |
PROT_EXEC are never specified together, if vm_map has MAP_WX flag set.
FreeBSD control flag allows specific binary to request WX exempt, and
there are per ABI boolean sysctls kern.elf{32,64}.allow_wx to enable/
disable globally.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28050
- Implement a dtrace_getnanouptime(), matching the existing
dtrace_getnanotime(), to avoid DTrace calling out to a potentially
instrumentable function.
(These should probably both be under KDTRACE_HOOKS. Also, it's not clear
to me that they are correct implementations for the DTrace thread time
functions they are used in .. fixes for another commit.)
- Don't allow FBT to instrument functions involved in EL1 exception handling
that are involved in FBT trap processing: handle_el1h_sync() and
do_el1h_sync().
- Don't allow FBT to instrument DDB and KDB functions, as that makes it
rather harder to debug FBT problems.
Prior to these changes, use of FBT on FreeBSD/arm64 rapidly led to kernel
panics due to recursion in DTrace.
Reliable FBT on FreeBSD/arm64 is reliant on another change from @andrew to
have the aarch64 instrumentor more carefully check that instructions it
replaces are against the stack pointer, which can otherwise lead to memory
corruption. That change remains under review.
MFC after: 2 weeks
Reviewed by: andrew, kp, markj (earlier version), jrtc27 (earlier version)
Differential revision: https://reviews.freebsd.org/D27766
Track the the current lock/reference state in a single variable,
rather than deducing the proper prison_deref() flags from a
combination of equations and hard-coded values.
Instead of trying to maintain pg_jobc counter on each process group
update (and sometimes before), just calculate the counter when needed.
Still, for the benefit of the signal delivery code, explicitly mark
orphaned groups as such with the new process group flag.
This way we prevent bugs in the corner cases where updates to the counter
were missed due to complicated configuration of p_pptr/p_opptr/real_parent
(debugger).
Since we need to iterate over all children of the process on exit, this
change mostly affects the process group entry and leave, where we need
to iterate all process group members to detect orpaned status.
(For MFC, keep pg_jobc around but unused).
Reported by: jhb
Reviewed by: jilles
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27871
This improves code structure and allows to put the lock asserts right
into place where the locks are needed.
Also move zeroing of the kinfo_proc structure from fill_kinfo_proc_only()
to fill_kinfo_proc(), this looks more symmetrical.
Reviewed by: jilles
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27871
Proctree lock is needed for correct calculation and collection of the
job-control related data in kinfo_proc. There was even an XXX comment
about it.
Satisfy locking and lock ordering requirements by taking proctree lock
around pass over each bucket in proc_iterate(), and in sysctl_kern_proc()
and note_procstat_proc() for individual process reporting.
Reviewed by: jilles
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27871
Increase the scope of the process group lock ownership. This ensures that
we are consistent in returning EIO for tty write from an orphan and delivery
of TTYOUT signals.
Reviewed by: jilles
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27871
Often, we have a process locked and need to get locked process group.
In this case, because progress group lock is before process lock,
unlocking process allows the group to be freed. See for instance
tty_wait_background().
Make pgrp structures allocated from nofree zone, and ensure type stability
of the pgrp mutex.
Reviewed by: jilles
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27871
When using NOTE_NSECONDS in the kevent(2) API, US_TO_SBT should be
used instead of NS_TO_SBT, otherwise the timeout results are
misleading.
PR: 252539
Reviewed by: kevans, kib
Approved by: kevans
MFC after: 3 weeks
This is just like debug.kdb.panic, except the string that's passed in
is reported in the panic message. This allows people with automated
systems to collect kernel panics over a large fleet of machines to
flag panics better. Strings like "Warner look at this hang" or "see
JIRA ABC-1234 for details" allow these automated systems to route the
forced panic to the appropriate engineers like you can with other
types of panics. Other users are likely possible.
Relnotes: Yes
Sponsored by: Netflix
Reviewed by: allanjude (earlier version)
Suggestions from review folded in by: 0mp, emaste, lwhsu
Differential Revision: https://reviews.freebsd.org/D28041
Ext_pg mbufs allow carrying multiple pages per mbuf. This
reduces mbuf linked list traversals, especially in socket
buffers, thereby reducing cache misses and CPU use for
applications using sendfile. Note that ext_pages use
unmapped pages, eliminating KVA mapping costs on 32-bit
platforms.
Ext_pg mbufs are also required for ktls (KERN_TLS), and having
them disabled by default is a stumbling block for those
wishing to enable ktls.
Reviewed-by: jhb, glebius
Sponsored by: Netfix
The originally chosen numbers interfere with downstream projects'
syscalls. Move them to the end of the syscall table instead.
Reported by: jrtc27
Reviewed by: brooks
MFC-With: 022ca2fc7f
Differential Revision: 022ca2fc7f
aio_fsync(O_DSYNC, ...) is the asynchronous version of fdatasync(2).
Reviewed by: kib, asomers, jhb
Differential Review: https://reviews.freebsd.org/D25071
POSIX O_DSYNC means that writes include an implicit fdatasync(2), just
as O_SYNC implies fsync(2).
VOP_WRITE() functions that understand the new IO_DATASYNC flag can act
accordingly, but we'll still pass down IO_SYNC so that file systems that
don't understand it will continue to provide the stronger O_SYNC
behaviour.
Flag also applies to fcntl(2).
Reviewed by: kib, delphij
Differential Revision: https://reviews.freebsd.org/D25090
vn_rdwr() must lock the entire file range for IO_APPEND
just like vn_io_fault() does for O_APPEND.
Reviewed by: kib, imp, mckusick
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D28008
When INVARIANTS is configred, the sendfile_iodone() callback verifies
that pages attached to the sendfile header are wired, but we unwire all
such pages after a synchronous pager error, before calling
sendfile_iodone().
Reported by: pho
Tested by: pho
Sponsored by: The FreeBSD Foundation
We have the d_off field in struct dirent for providing the seek offset
of the next directory entry. Several filesystems were not initializing
the field, which ends up being copied out to userland.
Reported by: Syed Faraz Abrar <faraz@elttam.com>
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27792
