For NFS RPCs that receive a NFSERR_DELAY reply, the delay time
is initially 1sec and then increases exponentially to NFS_TRYLATERDEL.
It was found that this delay time is excessive for some NFSv4
servers, which work well with a 1msec delay.
A 1sec delay resulted in very slow performance for Remove and
Rename when delegations and pNFS were enabled.
This patch decreases the initial delay time to 1msec.
Found during a recent IETF NFSv4 working group testing event.
MFC after: 2 weeks
It was a hack only needed for trpt, which can just define it locally.
This makes it possible to fix up systat which also includes the file.
Sponsored by: Rubicon Communications, LLC ("Netgate")
We want to set ENABLE_SK_INTERNAL only when building with USB support.
We'll leave it off in config.h and enble it via our bespoke build's
Makefile.inc.
Sponsored by: The FreeBSD Foundation
Note that these tests test the kernel TLS functionality directly.
Rather than using OpenSSL to perform negotiation and generate keys,
these tests generate random keys send data over a pair of TCP sockets
manually decrypting the TLS records generated by the kernel.
Reviewed by: markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D32652
Given nodes 1 and 2, where node 1 has an advskew of 0 and node 2 has an
advskew of 100, making them master and backup respectively.
If net.inet.carp.demotion is set to a negative value on node 1, node 2
might become master while node 1 still retains it master status. Wether
or not node 2 becomes master seems to depend on the nodes advskew and
what the demotion sysctl was set to on node 1.
The reason for node 2 becoming master seems to be that the calculated
advskew taking demotion into account is truncated to a single unsigned
byte when copied into the carp header for sending, and node 1 stays
master since it takes uses the whole non-truncated calculated advskew
when deciding wether to stay master.
PR: 259528
Reviewed by: donner, glebius
MFC after: 3 weeks
Sponsored by: Modirum MDPay
Differential Revision: https://reviews.freebsd.org/D32759
devinfo(8) manpage contains reference to pnpinfo(8) which existed at the
time. Remove it.
PR: 232587
MFC: 3 days
Reported by: Graham Perrin <grahamperrin@gmail.com>
Kegs with no items reserved have uk_reserve = 0. So the check
keg->uk_reserve >= dom->ud_free_items will be true once all slabs are
depleted. Then, rather than go and allocate a fresh slab, we return to
the cache layer.
The intent was to do this only when the keg actually has a reserve, so
modify the check to verify this first. Another approach would be to
make uk_reserve signed and set it to -1 until uma_zone_reserve() is
called, but this requires a few casts elsewhere.
Fixes: 1b2dcc8c54 ("uma: Avoid depleting keg reserves when filling a bucket")
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32516
M_USE_RESERVE is used in a couple of places in the VM to avoid unbounded
recursion when the direct map is not available, as is the case on 32-bit
platforms or when certain kernel sanitizers (KASAN and KMSAN) are
enabled. For example, to allocate KVA, the kernel might allocate a
kernel map entry, which might require a new slab, which requires KVA.
For these zones, we use uma_prealloc() to populate a reserve of items,
and then in certain serialized contexts M_USE_RESERVE can be used to
guarantee a successful allocation. uma_prealloc() allocates the
requested number of items, distributing them evenly among NUMA domains.
Thus, in a first-touch zone, to satisfy an M_USE_RESERVE allocation we
might have to check the slab lists of other domains than the current one
to provide the semantics expected by consumers.
So, try harder to find an item if M_USE_RESERVE is specified and the keg
doesn't have anything for current (first-touch) domain. Specifically,
fall back to a round-robin slab allocation. This change fixes boot-time
panics on NUMA systems with KASAN or KMSAN enabled.[1]
Alternately we could have uma_prealloc() allocate the requested number
of items for each domain, but for some existing consumers this would be
quite wasteful. In general I think keg_fetch_slab() should try harder
to find free slabs in other domains before trying to allocate fresh
ones, but let's limit this to M_USE_RESERVE for now.
Also fix a separate problem that I noticed: in a non-round-robin slab
allocation with M_WAITOK, rather than sleeping after a failed slab
allocation we simply try again. Call vm_wait_domain() before retrying.
Reported by: mjg, tuexen [1]
Reviewed by: alc
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32515
Pick up changes in option dependencies (WITHOUT_OPENSSL and WITHOUT_CXX)
and the addition of WITH_DETECT_TZ_CHANGES and WITH_LLVM_BINUTILS.
Sponsored by: The FreeBSD Foundation
In 7ec86b6609 ("Also print symbols when printing arm64 registers")
a new function was created to print most registers. Unfortunately the
Link Register (LR) was being printed when we should have printed the
Exception Link Register (ELR).
Fix this by adding the missing 'e'.
Sponsored by: The FreeBSD Foundation
Use types from sys/stat.h for the filesystem and inode numbers for extra
safety.
PR: 259504
Reported by: Markus Wild <freebsd-bugs@virtualtec.ch>
MFC after: 1 week
The iicoc driver supports the OpenCores I2C IP. This is included in at
least the SiFive "Unleashed" and "Unmatched" cores and probably others.
Suggested by: jrtc27
Only build on RISC-V for now, since we're not aware of any other cores
with this IP supported by FreeBSD.
Reviewed by: jrtc27, philip
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D32737
Mark Murray graciously provided access to an aarch64 system
to test the ld128 implementations. This patch address
* Misuses of copysignl() in sinpil() and tanpil().
* Redo the splitting of argument 'x' into an integer part and
remainder. The remainder must satify 0 <= r < 1.
* Update the reduction of the integer part to something that can
easily be seen as even or odd, e.g., sin(pi*x) = (-1)^n*sin(pi*r)
with n <= 2^112 and we an reduce n by subtracting integer powers
of 2.
* In s_cospil.c, fix typos where 'x' is used where 'ax', the
remainder, is required.
* In tanpil(), fix the use of an uninitialized variable, ax = fabsl(ax),
ax should be x in fabsl().
One item of note, in the limited tested on aarch64, the max ULP
for sinpil() and cospil() were less than 1.1 ULP, which is higher
that the desired max ULP less than 1. This was traced to the
kernel for cosl() in the fundamental interval [0,pi/4].
The coefficients in the minmax polynomial likely need refinement.
PR: 218514
MFC after: 1 week
For pNFS servers that specify that Layouts are to be returned
upon close, they may expect that LayoutReturn to happen before
the associated Close.
This patch modifies the NFSv4.1/4.2 pNFS client so that this
is done. This only affects a pNFS mount against a non-FreeBSD
NFSv4.1/4.2 server that specifies return_on_close in LayoutGet
replies.
Found during a recent IETF NFSv4 working group testing event.
MFC after: 2 weeks
Add a void *ni_drv_data field to struct ieee80211_node that drivers
can use to backtrack to their internal state from a net80211 node.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
X-Differential Revision: https://reviews.freebsd.org/D30654 (abandoned)
Use proc_get_binpath() to get the hardlink right.
PR: 248184
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32738
Similar to commit 2be417843a, I believe there could be a race between
the NFS client VOP_LOOKUP() and file Writing that could result in stale
file attributes being loaded into the NFS vnode by VOP_LOOKUP().
I have not been able to reproduce a failure due to this race, but
I believe that there are two possibilities:
The Lookup RPC happens while VOP_WRITE() is being executed and loads
stale file attributes after VOP_WRITE() returns when it has already
completed the Write/Commit RPC(s).
--> For this case, setting the local modify timestamp at the end of
VOP_WRITE() should ensure that stale file attributes are not loaded.
The Lookup RPC occurs after VOP_WRITE() has returned, while
asynchronous Write/Commit RPCs are in progress and then is
blocked by the vnode held by VOP_OPEN/VOP_CLOSE/VOP_FSYNC which
will flush writes via ncl_flush() or ncl_vinvalbuf(), clearing the
NMODIFIED flag (which indicates Writes-in-progress). The VOP_LOOKUP()
then acquires the NFS vnode lock and fills in stale file attributes.
--> Setting the local modify timestamp in ncl_flsuh() and ncl_vinvalbuf()
when they clear NMODIFIED should ensure that stale file attributes
are not loaded.
This patch does the above.
PR: 259071
Reviewed by: asomers
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32677
Commit 2be417843a added n_localmodtime, which is used by Lookup
and ReaddirPlus to check to see if the file attributes in an RPC
reply might be stale. This patch sets n_localmodtime in Deallocate.
Done as a separate commit, since Deallocate is not in stable/13.
PR: 259071
Reviewed by: asomers
Differential Revision: https://reviews.freebsd.org/D32635
Testing with it, there appears to be a race between Lookup
and VOPs like Setattr-of-size, where Lookup ends up loading
stale attributes (including what might be the wrong file size)
into the NFS vnode's attribute cache.
The race occurs when the modifying VOP (which holds a lock
on the vnode), blocks the acquisition of the vnode in Lookup,
after the RPC (with now potentially stale attributes).
Here's what seems to happen:
Child Parent
does stat(), which does
VOP_LOOKUP(), doing the Lookup
RPC with the directory vnode
locked, acquiring file attributes
valid at this point in time
blocks waiting for locked file does ftruncate(), which
vnode does VOP_SETATTR() of Size,
changing the file's size
while holding an exclusive
lock on the file's vnode
releases the vnode lock
acquires file vnode and fills in
now stale attributes including
the old wrong Size
does a read() which returns
wrong data size
This patch fixes the problem by saving a timestamp in the NFS vnode
in the VOPs that modify the file (Setattr-of-size, Allocate).
Then lookup/readdirplus compares that timestamp with the time just
before starting the RPC after it has acquired the file's vnode.
If the modifying RPC occurred during the Lookup, the attributes
in the RPC reply are discarded, since they might be stale.
With this patch the test program works as expected.
Note that the test program does not fail on a July stable/12,
although this race is in the NFS client code. I suspect a
fairly recent change to the name caching code exposed this
bug.
PR: 259071
Reviewed by: asomers
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D32635
Note that this is largely untested at this point, as was
the previous version; I'm committing this mostly to get
rid of `struct linux_pt_reg`.
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D32735
In 6e66030c4c, additional ptracestop was added in order
to implement PTRACE_EVENT_EXEC. Make it only apply to cases
where the debugger is a Linux processes; native FreeBSD
debuggers can trace Linux processes too, but they don't
expect that additonal ptracestop.
Fixes: 6e66030c4c
Reported By: kib
Reviewed By: kib
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D32726
The man page states that "-t %+" prints time information in the same
format as date with no format specifier.
This was not the case, the format used was always that of date for the
POSIX locale.
The fix suggested by the reporter leads to output that matches the
documentation.
Reported by: Jamie Landeg-Jones <jamie@catflap.org>
MFC after: 3 days
Commit 5e5ca4c8fc added a NFSMNTP_DELEGISSUED flag to indicate when
a delegation has been issued to the mount. For the common case
where an NFSv4 server is not issuing delegations, this flag
can be checked to avoid acquisition of the NFSCLSTATEMUTEX.
This patch adds checks for NFSMNTP_DELEGISSUED being set
to two more functions.
This change appears to be performance neutral for a small number
of opens, but should reduce lock contention for a large number of opens
for the common case where server is not issuing delegations.
MFC after: 2 week
If we get a Sacked peer with an MTU change we can retransmit forever if the
last bytes are sacked and the client goes away (think power off). Then we
never see the end condition and continually retransmit.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D32671
bwsrawdata() is supposed to return the string buffer.
PR: 259451
Reported by: sigsys@gmail.com
Fixes: d053fb22f6 ("usr.bin/sort: Avoid UBSan errors")
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Previously it returned a shorter struct. I can't find any
modern software that uses it, but tests/ptrace from strace(1)
repo complained.
Differential Revision: https://reviews.freebsd.org/D32601
This fixes ./waitid.gen.test from the strace(1) test suite.
Reviewed By: kib
Sponsored By: EPSRC
Differential Revision: https://reviews.freebsd.org/D32617
