pmap_extract() already does it.
In pmap_enter(), opa has already been masked so don't do it again.
Wrap a long line (recent transgression).
Use trunc_page() in pmap_mapdev() instead of anding with PG_FRAME, since
that is what we really meant.
Submitted by: alc (first item)
- export the rest of the cpu features (and amd's features).
- turn on EFER_NXE, depending on the NX amd feature bit
- reorg the identcpu stuff a bit in order to stop treating the
amd features as second class features (since it is now a primary feature
bit set) and make it easier to export.
lives in the top 12 'available' bits. atop() in the PHYS_TO_VM_PAGE()
macro only masks off the lower bits (by accident) and the upper bits
in the 64 bit ptes turn into "interesting" index values.
pmap_remove() would be called with a huge range and we'd stride across
it in only 2MB chunks. This would manifest as massive cpu time and a
largely unresponsive system during hard swap. Instead, check the higher
page directories which means we can run pmap_remove() in just a few
hundred loop iterations instead of millions since we can process
address space in chunks of 512GB and 1GB as well as 2MB.
Eternal thanks to: tmm
when I reordered events in accept1() to allocate a file descriptor
earlier, I didn't properly update use of goto on exit to unwind for
cases where the file descriptor is now held, but wasn't previously.
The result was that, in the event of accept() on a non-blocking socket,
or in the event of a socket error, a file descriptor would be leaked.
This ended up being non-fatal in many cases, as the file descriptor
would be properly GC'd on process exit, so only showed up for processes
that do a lot of non-blocking accept() calls, and also live for a long
time (such as qmail).
This change updates the use of goto targets to do additional unwinding.
Eyes provided by: Brian Feldman <green@freebsd.org>
Feet, hands provided by: Stefan Ehmann <shoesoft@gmx.net>,
Dimitry Andric <dimitry@andric.com>
Arjan van Leeuwen <avleeuwen@piwebs.com>
which doesn't support ACPI power states. Return AE_NOT_FOUND for these
cases and don't print the warning message. Also, print the name of the
handle instead of device when unable to switch states. The device is often
not attached at this point and so its name is NULL, which doesn't help
debugging.
is generic to any threading system. This commit does not link this
file to the build yet, nor does it remove these functions from their
current location in kern_thread.c. (that commit coming up after further review)
Dividing by 0 in order to check for irq13/exception16 delivery apparently
always causes an irq13 even if we have configured for exception16 (by
setting CR0_NE). This was expected, but the timing of the irq13 was
unexpected. Without CR0_NE, the irq13 is delivered synchronously at
least on my test machine, but with CR0_NE it is delivered a little
later (about 250 nsec) in PIC mode and much later (5000-10000 nsec)
in APIC mode. So especially in APIC mode, the irq13 may arrive after
it is supposed to be shut down. It should then be masked, but the
shutdown is incomplete, so the irq goes to a null handler that just
reports it as stray. The fix is to wait a bit after dividing by 0 to
give a good chance of the irq13 being handled by its proper handler.
Removed the hack that was supposed to recover from the incomplete shutdown
of irq13. The shutdown is now even more incomplete, or perhaps just
incomplete in a different way, but the hack now has no effect because
irq13 is edge triggered and handling of edge triggered interrupts is
now optimized by skipping their masking. The hack only worked due
to it accidentally not losing races.
The incomplete shutdown of irq13 still allows unprivileged users to
generate a stray irq13 (except on systems where irq13 is actually used)
by unmasking an npx exception and causing one. The exception gets
handled properly by the exception 16 handler. A spurious irq13 is
delivered asynchronously but is harmless (as in the probe) because it
is almost perfectly not handled by the null interrupt handler.
Perfectly not handling it involves mainly not resetting the npx busy
latch. This prevents further irq13's despite them not being masked in
the [A]PIC.
with an ASUS A7N8X-E motherboard in APIC mode, since storming interrupts
don't repeat immediately. Use DELAY(1) to wait a bit for them to repeat.
This affects all systems. Only delay for the first
(10 * intr_storm_threshold) interrupts (per interrupt handler) so that
this is only a pessimization while warming up. Throttle after calling
the sub-handlers instead of before so that the long delay given by
throttling can be used instead of the DELAY(1) to detect storms after
warming up.
Reduced the throttling period from 1/10 second to 1/hz seconds so that
throttling doesn't destroy performance so much. Interrupts that are
detected as storming are effectively handled by polling at a frequency
of hz Hz. On A7N8X-E's there is another hardware or configuration bug
that makes the throttled frequency closer to 2*hz Hz.
tree, output an empty string instead of "?". This is already what
happened with DEVICE_SYSCTL_LOCATION and DEVICE_SYSCTL_PNPINFO. This
makes the output of "sysctl dev" much nicer (it won't display those
empty sysctls).
Reviewed by: des
"stray irq 9" messages on my Thinkpad. It may also help with general
reboot consistency although the recent hang on reboot was solved by
acpi_cpu.c rev 1.39.
after. Unify the paths for all Cx states. Remove cpu_idle_busy and
instead do the little profiling we need before re-enabling interrupts.
Use 1 quantum as estimate for C1 sleep duration since the timer interrupt
is the main reason we wake.
While here, change the cx_history sysctl to cx_usage and report statistics
for which idle states were used in terms of percent. This seems more
intuitive than counters. Remove the cx_stats structure since it's no
longer used. Update the man page.
Change various types which do not need explicit size.
