Commit Graph

27385 Commits

Author SHA1 Message Date
Søren Schmidt
231f599691 First pre alpha Work In Progress commit of a IDE/ATAPI tape driver.
It does endeed work, but there is still some problems to solve.
I get a "nonrecovered data error" from time to time, but besides
this it has backed up several Gigs allready.

Please report any success/failure directly to me.

Thanks to Warner Losh for providing a drive to use in writing
this driver!
1998-03-01 18:57:29 +00:00
Steve Price
f48bc66239 Replace previous commit with a check disallowing ptr from running
off the end of the list variable.

PR:		5345, 5610
Submitted by:	nagao@cs.titech.ac.jp
1998-03-01 18:49:37 +00:00
Søren Schmidt
ff86df5bb2 Undo the previous commit which was NOT for -current.
Rearrange a few lines for better order.
1998-03-01 17:29:25 +00:00
Satoshi Asami
fc6ffbcae9 Add Intel 430TX chipset, namely 82439TX system controller and four
incarnations of 82371AB (P/I bridge, IDE, USB and power management).

Tested by:	jkh
1998-03-01 10:10:31 +00:00
Andrey A. Chernov
1cca86f4e8 Add more info about special characters in dos2unix/unix2dos tables 1998-03-01 08:41:05 +00:00
Bruce Evans
b0a76e6a69 Restored half of the ANSI semantic errors fix which was clobbered
by the previous commit.
1998-03-01 06:06:20 +00:00
Bruce Evans
ddf6208225 Fixed syntax error in previous commit. 1998-03-01 06:01:33 +00:00
KATO Takenori
55a5998a24 Sync with sys/i386/isa/clock.c revision 1.114. 1998-03-01 05:22:25 +00:00
Jordan K. Hubbard
01f228ffbe Wargh! Who went and changed all the getopt() comparisons from -1 to
EOF?  The getopt(3) manpage clearly states that the return value is *-1*,
not EOF!  Besides, getopt(3) isn't reading from a file. :)

Noticed-while:	merging to 2.2 (where this is correct).
1998-03-01 05:10:28 +00:00
John Dyson
ffc82b0a70 1) Use a more consistent page wait methodology.
2)	Do not unnecessarily force page blocking when paging
	pages out.
3)	Further improve swap pager performance and correctness,
	including fixing the paging in progress deadlock (except
	in severe I/O error conditions.)
4)	Enable vfs_ioopt=1 as a default.
5)	Fix and enable the page prezeroing in SMP mode.

All in all, SMP systems especially should show a significant
improvement in "snappyness."
1998-03-01 04:18:54 +00:00
Mike Smith
1ee98f0885 Style nits and staticism with the previous commit.
Submitted by:	bde
1998-03-01 01:37:38 +00:00
Mike Smith
b1f04c95e1 Add local stup putpages/getpages routines.
Submitted by:	Terry Lambert <terry@freebsd.org>
1998-03-01 00:51:43 +00:00
Alexander Langer
098fd386f6 Use .Nm rdist for second .Nm occurrence in synopsis. 1998-03-01 00:18:25 +00:00
Alexander Langer
cb72607e75 Use .Nm id' instead of .Nm' for the synopsis lines.
PR:		5876
1998-02-28 21:37:54 +00:00
Poul-Henning Kamp
3301c800f5 Prevent the TSC from being used on APM machines, we have no idea if
it runs at a constant frequency.  This was less of an issue before,
because the TSC only interpolated in the HZ intervals, but now where
the timecounter is used all the way, this becomes much more visible.

Nit: Fix a printf which triggered the bde-filter.
1998-02-28 21:16:13 +00:00
Poul-Henning Kamp
c544ff8a5e Make it possible to indicate that we don't care about the remote
sides IP address, as long as it isn't 0.0.0.0
1998-02-28 21:01:09 +00:00
James Raynard
df37b71c14 Strings are terminated by NUL, not NULL. 1998-02-28 18:05:42 +00:00
James Raynard
09831267df Don't assume sigset_t and int are equivalent. 1998-02-28 16:02:24 +00:00
James Raynard
73d8529af3 Fix a few typos. 1998-02-28 15:37:25 +00:00
James Raynard
95297e22ca Strings are terminated by NUL, not NULL. 1998-02-28 15:35:22 +00:00
James Raynard
194787f381 Don't assume sigset_t and int are equivalent. Also, get
sigprocmask arguments the right way round.
1998-02-28 15:14:00 +00:00
James Raynard
37c77f547a Don't assume sigset_t and int are equivalent. 1998-02-28 10:50:02 +00:00
Andrey A. Chernov
271012d5b9 Install manpage too 1998-02-28 10:41:01 +00:00
KATO Takenori
acdd6c1ca2 Sync with sys/i386/isa/if_ed.c revision 1.136. 1998-02-28 07:38:18 +00:00
John Hay
7b3a8a7d1b Update to reflect reality. We do support the WANic 400/405 PCI cards.
Fix some typos and clean it up a little.
1998-02-28 07:06:25 +00:00
Steve Price
e827b8c5cb foo.gz is created by 'make test' so add it to CLEANFILES. 1998-02-28 06:27:59 +00:00
Steve Price
163df7f801 algorithm.doc renamed to algorithm.txt in new distribution. 1998-02-28 06:10:08 +00:00
Steve Price
25552e1d6d Merge conflicts. 1998-02-28 06:08:17 +00:00
Steve Price
9521a6bb06 This commit was generated by cvs2svn to compensate for changes in r33904,
which included commits to RCS files with non-trunk default branches.
1998-02-28 06:04:26 +00:00
Steve Price
bd957a8d6c Initial import of zlib-1.1.1
PR:		5869
Reviewed by:	jdp
1998-02-28 06:04:26 +00:00
Steve Price
f2328ab40a Remove the config_* routines with permission from Poul-Henning Kamp,
the original author.

PR:		5834
Discussed with:	phk, jkh
1998-02-28 03:57:05 +00:00
Brian Somers
0ffaca1078 1) in CleanupAliasData, don't nullify entry in linkTableOut
since there might be permanent entries still left after
   calls to DeleteLink (it will be nullified by DeleteLink
   if all entries are deleted, won't it ?)

2) in PacketAliasSetAddress, set the aliasing address
   even when PKT_ALIAS_RESET_ON_ADDR_CHANGE is in effect.
   Just don't clean up links in this case.

Submitted by: Ari Suutari <ari@suutari.iki.fi>
         via: Charles Mott <cmott@srv.net>
PR: 5041
1998-02-27 23:07:07 +00:00
Paul Traina
897e6eb1f4 Compile under -W -Wall -Werror.
Fix API - keycrunch takes const char's, not chars.
1998-02-27 22:36:51 +00:00
Stefan Eßer
ebef4c231e Add PCI device ID of Surecom NE-34 1998-02-27 22:30:36 +00:00
Guido van Rooij
d3c0af6943 Raise ncallout from NPROC + 16 to NPROC + 16 + MAXFILES. This shold
prevent a possible DOS attack. The proper fix (to dynamically grow
the callout list) is in the make.
Submitted by:	Paul Traina
1998-02-27 19:58:29 +00:00
Bill Fenner
6570d2f3ad Convert ${MASTER_SITE_SUBDIR} to %SUBDIR% as in bsd.port.mk rev 1.257 1998-02-27 18:34:56 +00:00
Satoshi Asami
a7b8695b78 Fix path in commented-out sample of MASTER_SITE_TEX_CTAN.
PR:		5861
Submitted by:	kuriyama@opt.phys.waseda.ac.jp
1998-02-27 15:45:34 +00:00
KATO Takenori
269d7ee60c Sync with sys/i386/isa/sio.c revision up to 1.199. 1998-02-27 15:24:51 +00:00
KATO Takenori
84aa00c273 Sync with sys/i386/isa/if_fe.c revision up to 1.39. 1998-02-27 15:23:37 +00:00
KATO Takenori
03e97bc7ec Sync with sys/i386/isa/if_ed.c revision up to 1.135. 1998-02-27 15:22:06 +00:00
KATO Takenori
71e3969b24 Sync with sys/i386/conf/majors.i386 revision 1.36. 1998-02-27 15:20:07 +00:00
Tatsumi Hosokawa
71cbe8e15a Support for "MAC address in CIS" type cards.
For example, IBM Creditcard Ethernet's MAC address is ALWAYS
"0:2:4:6:8:a" :-) without this code.
1998-02-27 14:29:51 +00:00
Mike Smith
cce0eefd5a Fix a problem with the conversion of Unix filenames into the VFAT
namespace.
Submitted by:	Dmitrij Tejblum <dima@tejblum.dnttm.rssi.ru>
1998-02-27 12:22:22 +00:00
Jun-ichiro itojun Hagino
1ed882e558 polish the code.
use tradictional decls.  tabify.  remove bogus #defines.  prototypes.
1998-02-27 11:10:18 +00:00
Jun-ichiro itojun Hagino
751bf650a8 make sys/netkey/key{,_debug}.c compile. I believe it works but not tested.
I'll polish the code later on.
1998-02-27 10:02:49 +00:00
Tatsumi Hosokawa
cf76d25ad9 Removed a confusing "#if 0 ... #endif". 1998-02-27 09:47:36 +00:00
Tatsumi Hosokawa
07131beb35 Removed "#define EXTERN" because this file doesn't have main(). 1998-02-27 08:40:53 +00:00
Tatsumi Hosokawa
1b39ab6931 Moved main() to a new file (pccardd.c). 1998-02-27 08:19:25 +00:00
Tatsumi Hosokawa
d50ea5b440 Removed unused #include and unneccesary comments. 1998-02-27 08:00:18 +00:00
Tatsumi Hosokawa
26e41202ec "pccardc dumpcis" does not need write permission of /dev/card?. 1998-02-27 07:27:27 +00:00