1. vhold and zap immediately instead of postponing few lines later
2. increment numneg after new entry is added
No functional changes.
No objections: kib
Previously the code would just increment statistics while only holding a
shared lock, in effect losing updates.
Separate tracking for nchstats is removed as values can be obtained from
existing counters. Note that some fields are updated by external
consumers and are left unfixed. This should not be a serious issue as
this structure looks quite obsolete.
No strong objections: kib
- Use SDT_PROBE<N>() instead of SDT_PROBE(). This has no functional effect
at the moment, but will be needed for some future changes.
- Don't hardcode the module component of the probe identifier. This is
set automatically by the SDT framework.
MFC after: 1 week
SDT_PROBE requires 5 parameters whereas SDT_PROBE<n> requires n parameters
where n is typically smaller than 5.
Perhaps SDT_PROBE should be made a private implementation detail.
MFC after: 20 days
the size of the name cache hash table (mapping file names to vnodes)
and the vnode hash table (mapping mount point and inode number to vnode).
An appropriate locking strategy is the key to changing hash table sizes
while they are in active use.
Reviewed by: kib
Tested by: Peter Holm
Differential Revision: https://reviews.freebsd.org/D2265
MFC after: 2 weeks
Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free
list) of either counter are still guarded with vnode interlock.
Reviewed by: kib (earlier version)
Tested by: pho
argument. This will be used for the Linux emulation layer - for Linux,
PATH_MAX is 4096 and not 1024.
Differential Revision: https://reviews.freebsd.org/D2335
Reviewed by: kib@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
sysctl_debug_hashstat_nchash() and sysctl_debug_hashstat_rawnchash().
These changes are in preparation for allowing changes in the size
of the vnode hash tables driven by increases and decreases in the
maximum number of vnodes in the system.
Reviewed by: kib@
Phabric: D2265
in r276564, change path type to char * (pathnames are always char *).
And remove bogus casts of malloc().
kern___getcwd() internally doesn't actually use or support u_char *
paths, except to copy them to a normal char * path.
These changes are not visible to libc as libc/gen/getcwd.c misdeclares
__getcwd() as taking a plain char * path.
While here remove _SYS_SYSPROTO_H_ for __getcwd() syscall as
we always have sysproto.h.
Pointed out by: bde
MFC after: 1 week
- Wrong integer type was specified.
- Wrong or missing "access" specifier. The "access" specifier
sometimes included the SYSCTL type, which it should not, except for
procedural SYSCTL nodes.
- Logical OR where binary OR was expected.
- Properly assert the "access" argument passed to all SYSCTL macros,
using the CTASSERT macro. This applies to both static- and dynamically
created SYSCTLs.
- Properly assert the the data type for both static and dynamic
SYSCTLs. In the case of static SYSCTLs we only assert that the data
pointed to by the SYSCTL data pointer has the correct size, hence
there is no easy way to assert types in the C language outside a
C-function.
- Rewrote some code which doesn't pass a constant "access" specifier
when creating dynamic SYSCTL nodes, which is now a requirement.
- Updated "EXAMPLES" section in SYSCTL manual page.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Having ncneg diverge with the actual length of the ncneg tailq causes
NULL dereference.
Add assertion that an entry taken from ncneg queue is indeed negative.
Reported by and discussed with: avg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In its stead use the Solaris / illumos approach of emulating '-' (dash)
in probe names with '__' (two consecutive underscores).
Reviewed by: markj
MFC after: 3 weeks
option, unbreak the lock tracing release semantic by embedding
calls to LOCKSTAT_PROFILE_RELEASE_LOCK() direclty in the inlined
version of the releasing functions for mutex, rwlock and sxlock.
Failing to do so skips the lockstat_probe_func invokation for
unlocking.
- As part of the LOCKSTAT support is inlined in mutex operation, for
kernel compiled without lock debugging options, potentially every
consumer must be compiled including opt_kdtrace.h.
Fix this by moving KDTRACE_HOOKS into opt_global.h and remove the
dependency by opt_kdtrace.h for all files, as now only KDTRACE_FRAMES
is linked there and it is only used as a compile-time stub [0].
[0] immediately shows some new bug as DTRACE-derived support for debug
in sfxge is broken and it was never really tested. As it was not
including correctly opt_kdtrace.h before it was never enabled so it
was kept broken for a while. Fix this by using a protection stub,
leaving sfxge driver authors the responsibility for fixing it
appropriately [1].
Sponsored by: EMC / Isilon storage division
Discussed with: rstone
[0] Reported by: rstone
[1] Discussed with: philip
we need to call ufs_checkpath() to walk from our new location to
the root of the filesystem to ensure that we do not encounter
ourselves along the way. Until now, we accomplished this by reading
the ".." entries of each directory in our path until we reached
the root (or encountered an error). This change tries to avoid the
I/O of reading the ".." entries by first looking them up in the
name cache and only doing the I/O when the name cache lookup fails.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 4 weeks
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
significantly. Upon investigation this was caused by name cache
misses for lookups of "..". For name cache entries for non-".."
directories, the cache entry serves double duty. It maps both the
named directory plus ".." for the parent of the directory. As such,
two ctime values (one for each of the directory and its parent) need
to be saved in the name cache entry.
This patch adds an entry for ctime of the parent directory to the
name cache. It also adds an additional uma zone for large entries
with this time value, in order to minimize memory wastage.
As well, it fixes a couple of cases where the mtime of the parent
directory was being saved instead of ctime for positive name cache
entries. With this patch, Lookup RPC counts return to values similar
to pre-r230394 kernels.
Reported by: bde
Discussed with: kib
Reviewed by: jhb
MFC after: 2 weeks
appropriate timestamps. Restore the assertions which verify that
NCF_TS is set when timestamp is asked for.
Reviewed by: jhb (previous version)
MFC after: 2 weeks
consistently, creating some namecache entries without NCF_TS flag.
This causes panic due to failed assertion.
As a temporal relief, remove the assert. Return epoch timestamp for
the entries without timestamp if asked.
While there, consolidate the code which returns timestamps, into a
helper cache_out_ts().
Discussed with: jhb
MFC after: 2 weeks
provide struct namecache_ts which is the old struct namecache. Only
allocate struct namecache_ts if non-null struct timespec *tsp was
passed to cache_enter_time, otherwise use struct namecache.
Change struct namecache allocation and deallocation macros into static
functions, since logic becomes somewhat twisty. Provide accessor for
the nc_name member of struct namecache to hide difference between
struct namecache and namecache_ts.
The aim of the change is to not waste 20 bytes per small namecache
entry.
Reviewed by: jhb
MFC after: 2 weeks
X-MFC-note: after r230394
entries on one client when a directory was renamed on another client. The
root cause for the stale entry being trusted is that each per-vnode nfsnode
structure has a single 'n_ctime' timestamp used to validate positive name
cache entries. However, if there are multiple entries for a single vnode,
they all share a single timestamp. To fix this, extend the name cache
to allow filesystems to optionally store a timestamp value in each name
cache entry. The NFS clients now fetch the timestamp associated with
each name cache entry and use that to validate cache hits instead of the
timestamps previously stored in the nfsnode. Another part of the fix is
that the NFS clients now use timestamps from the post-op attributes of
RPCs when adding name cache entries rather than pulling the timestamps out
of the file's attribute cache. The latter is subject to races with other
lookups updating the attribute cache concurrently. Some more details:
- Add a variant of nfsm_postop_attr() to the old NFS client that can return
a vattr structure with a copy of the post-op attributes.
- Handle lookups of "." as a special case in the NFS clients since the name
cache does not store name cache entries for ".", so we cannot get a
useful timestamp. It didn't really make much sense to recheck the
attributes on the the directory to validate the namecache hit for "."
anyway.
- ABI compat shims for the name cache routines are present in this commit
so that it is safe to MFC.
MFC after: 2 weeks
This function updates path string to vnode's full global path and checks
the size of the new path string against the pathlen argument.
In vfs_domount(), sys_unmount() and kern_jail_set() this new function
is used to update the supplied path argument to the respective global path.
Unbreaks jailed zfs(8) with enforce_statfs set to 1.
Reviewed by: kib
MFC after: 1 month
nullfs. The problem is that resulting vnode is only required to be
held on return from the successfull call to vop, instead of being
referenced.
Nullfs VOP_INACTIVE() method reclaims the vnode, which in combination
with the VOP_VPTOCNP() interface means that the directory vnode
returned from VOP_VPTOCNP() is reclaimed in advance, causing
vn_fullpath() to error with EBADF or like.
Change the interface for VOP_VPTOCNP(), now the dvp must be
referenced. Convert all in-tree implementations of VOP_VPTOCNP(),
which is trivial, because vhold(9) and vref(9) are similar in the
locking prerequisites. Out-of-tree fs implementation of VOP_VPTOCNP(),
if any, should have no trouble with the fix.
Tested by: pho
Reviewed by: mckusick
MFC after: 3 weeks (subject of re approval)
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.
Reviewed by: rwatson
Approved by: re (bz)
Move debug.ncnegfactor to vfs.ncnegfactor [1].
Provide some descriptions for the namecache related sysctls [1].
Based on the submission by: Rogier R. Mulhuijzen <drwilco drwilco net> [1]
MFC after: 2 weeks
X-MFC-note: remove debug.ncnegfactor in HEAD after MFC
use '-' in probe names, matching the probe names in Solaris.[1]
Add userland SDT probes definitions to sys/sdt.h.
Sponsored by: The FreeBSD Foundation
Discussed with: rwaston [1]
Assert this.
In the reported panic, vdestroy() fired the assertion "vp has namecache
for ..", because pseudofs may end up doing cache_enter() with reclaimed
dvp, after dotdot lookup temporary unlocked dvp.
Similar problem exists in ufs_lookup() for "." lookup, when vnode
lock needs to be upgraded.
Verify that dvp is not reclaimed before calling cache_enter().
Reported and tested by: pho
Reviewed by: kan
MFC after: 2 weeks
vn_open_cred in default implementation. Valid struct ucred is needed for
audit and MAC, and curthread credentials may be wrong.
This further requires modifying the interface of vn_fullpath(9), but it
is out of scope of this change.
Reviewed by: rwatson
and calls to vn_vptocnp() by moving more of the common code to
vn_vptocnp(). Rename vn_vptocnp() to vn_vptocnp_locked() to signify that
cache is locked around the call.
Do not track buffer position by both the pointer and offset, use only
buflen to record the start of the free space.
Export vn_vptocnp() for external consumers as a wrapper around
vn_vptocnp_locked() that locks the cache and handles hold counts.
Tested by: pho
