This prepares to consolidate hn_stop() and netvsc_detach().
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8055
- The original 'disengage' ATA controller model does not work properly
for all possible disk configurations. Use the newly added ATA disk
veto eventhandler to fit into all possible disk configuration.
- If the 'invalid LUN' happens on blkvsc controllers, return
CAM_DEV_NOT_THERE so that CAM will not destroy attached disks under
the blkvsc controllers.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Discussed with: mav
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7693
Suspend:
- Prevent the backend from being touched on TX path.
- Clear the RNDIS RX filter, and wait for RX to drain.
- Make sure that NVS see the chimney sending buffer and RXBUF
disconnection, before unlink these buffers from the channel.
Resume:
- Reconfigure the RNDIS filter.
- Allow TX path to work on the backend.
- Kick start the TX eof task, in case the OACTIVE is set.
This fixes various panics, when the interface has traffic and MTU
is being changed.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8046
It's unsafe to update the BAR when the related EN bit is set.
Submitted by: Dexuan Cui <decui microsoft com>
Reviewed by: jhb
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7914
Elantech trackpads are found in some laptops like the Asus UX31E. They
are "synaptics compatible" but use a slightly different protocol.
Elantech hardware support is not enabled by default and just like
Synaptic or TrackPoint devices it should be enabled by setting
tunable, in this case hw.psm.elantech_support, to non-zero value
PR: 205690
Submitted by: Vladimir Kondratyev <wulf@cicgroup.ru>
MFC after: 1 week
Clear 'sc_calibrating' flag and stop calibration task when interface
is not associated; this fixes possible panic after detach.
Reported and tested by: hselasky
Reviewed by: adrian
MFC after: 6 days
'compat' can never be NULL, because the compatible check loop ends when
compat->ocd_str is NULL. This causes ds1307 to attach to any unclaimed i2c
device.
- Added bhnd(4) bus APIs for per-core ioctl/iost register access.
- Updated reset/suspend bhnd(4) APIs for compatibility with ioctl/iost
changes.
- Implemented core reset/suspend support for both bcma(4) and siba(4).
- Implemented explicit release of all outstanding PMU requests at the bus
level when putting a core into reset.
Approved by: adrian (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D8009
* Don't do the antenna switching when setting up the rate table - we don't
take into account whether it's an active antenna or not (eg shared with BT.)
I'll look into this a bit more later.
* The default antenna is still 1, I'll look into that a bit more later.
(So no, this doesn't fix it for Larry who needs ANT_B to be active, not
ANT_A.)
* My changes to the rate control setup used the wrong method for finding
a suitable rate, which led to 1M CCK frames being queued for 11a operation.
This is .. sub-optimal. Change the rate control lookup path to use
the global table instead of the per-node table, which won't be setup
until the node rate table is setup (which happens way too late in this
game.)
Tested:
* Intel 7260, 2G and 5G operation.
Add check for evdev argument of evdev_free being NULL. This is valid
value and should not cause crash. In this case evdev_free does nothing
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
AMD chipsets have proprietary mechanisms for dicovering resources.
Those resources are not discoverable via plug-and-play mechanisms
like PCI configuration registers or ACPI.
For this reason a chipset-specific knowledge of proprietary registers
is required.
At present there are two FreeBSD drivers that require the proprietary
resource discovery. One is amdsbwd which is a driver for the watchdog
timer in the AMD chipsets. The other is intpm SMBus driver when it
attaches to the newer AMD chipsets where the resources of the SMBus HBA
are not described in the regular PCI way.
In both cases the resources are discovered by accessing AMD PMIO space.
Thus, many definitions are shared between the two drivers.
This change puts those defintions into a common header file.
As an added benefit, intpm driver now supports newest FCHs built into
AMD processors of Family 15h, models 70h-7Fh and Family 16h, models
30h-3Fh.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8004
This changes the transmit rate control code to do a few things:
* use fixed rates (mcast, ucast, mgmt) where required.
* Don't use a hard-coded 11a or 11bg rate for non-data frames -
use what net80211 says we should use.
* use mgmtrate for EAPOL frames.
Reviewed by: avos
Differential Revision: https://reviews.freebsd.org/D7994
event generation is disabled by default in favour of sysmouse. This
behavoiur is controlled by kern.evdev.rcpt_mask sysctl, bit 2 should
be set to give priority to hw over sysmouse
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
Reviewed by: hans
Differential Revision: https://reviews.freebsd.org/D7863
event generation is disabled by default in favour of kbdmux. This
behavoiur is controlled by kern.evdev.rcpt_mask sysctl, bit 3 should
be set to give priority to hw over mux
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
Reviewed by: hans
Differential Revision: https://reviews.freebsd.org/D7957
During a bus rescan the check for an invalid vendor ID of a subfunction
used the wrong constant.
Submitted by: Dexuan Cui <decui@microsoft.com>
MFC after: 3 days
This is an RTL8168 chip, which we already support so all we have to do is add
the vendor ID.
PR: 212876
Submitted by: Tobias Kortkamp <t@tobik.me>
MFC after: 3 days
So that reinitialization, e.g. MTU change, will not fail when the system
memory is excessively fragmented.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7961
The assumption that the channel is only opened upon synthetic device
attach time no longer holds, e.g. Hyper-V network device MTU changes.
We have to allow device drivers to preallocate bufrings, e.g. in
attach DEVMETHOD, to prevent bufring allocation failure once the
system memory is fragmented after running for a while.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7960
Summary:
If the environment variable is set, U-boot adds a 'bootargs' property to
/chosen. This is already handled by ARM and MIPS, but should be handled in a
central location. For now, ofw_subr.c is a good place until we determine if it
should be moved to init_main.c, or somewhere more central to all architectures.
Eventually arm and mips should be modified to use ofw_parse_bootargs() as well,
rather than using the duplicate code already.
Reviewed By: adrian
Differential Revision: https://reviews.freebsd.org/D7846
So that NVS version probing failure does not look too scary.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7950
* We need to first call ivp->iv_newstate(), to enqueue the deauth/deassoc
mgmt frame, then flush the tx queue, before actually calling
iwm_release().
* cycling a wlan connection via wpa_cli frontend to wpa_supplicant, by
issuing disconnect and reconnect commandos works quite well.
(There is still an issue when disconnecting/reconnecting too quickly)
* Reassociating or roaming via wpa_supplicant is still broken.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7943
* No functional change, none of these values were ever read.
* The values removed from struct iwm_nvm_data are only used for old dvm
devices in Linux iwlwifi, and irrelevant to iwm hence.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7945
* This removes deprecated scan API definitions, which have been unused
since the upgrade to version 16 firmware in change r303327.
* Part of this change matches the header-file changes in Linux git commit
1f9403863c080478ad78247c89b018e95bdfb027.
* No functional change.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7937
The iwm(4) iwm_poll_bit() function returns 1 on success, and 0 on failure,
whereas the iwl_poll_bit() in Linux iwlwifi returns < 0 on failure.
So the (ret < 0) check ended up ignoring any error returned by
iwm_poll_bit().
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7932
This fixes a potential buffer overrun in the firmware parsing code.
Reported by: Coverity
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7931
The wantresp field in struct iwm_rx_data has never been used for anything,
so we can just delete it.
Apparently struct iwm_sf_cfg_cmd was compiled correctly (using a 32bit
value to represent the enum), but it still seems like a very bad idea to use
an enum type in a __packed struct.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7930
The htole32 was working fine for little-endian machines, but would have
been broken on big-endian.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7929
- Don't change RNDIS RSS configuration for RSS key sysctl, if the
interface is not capable of RSS yet.
- Don't change RSS indirect table (both cached one and RNDIS RSS
configuration), if the interface is not capable of RSS yet.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7924
And don't allow capability changes during reinitialization, which
breaks too much static configuration.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7922
NVS and NDIS version change would break too much assumption and static
configuration.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7919
drivers.
The BMIPS32/BMIPS3300 cores use a register layout distinct from the MIPS74K
core, and are only found on siba(4) devices.
Reviewed by: mizhka
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7791
While I'm here, add comment along the attach DEVMETHOD.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7874
* hard code a noise floor of -96 for now. The noise floor update code returns
some "interesting" values that I can't map to anything useful right now.
* Ensure a default noise floor is set - otherwise the initial scan results
have a noise floor of '0'.
* Fix up the RSSI calculation to be correctly relative to the noise floor.
The RSSI routines return an absolute value in dBm - so fix this up.
* Cap RSSI values appropriately.
* Ensure we pass in a 1/2 dB unit value in to net80211.
Tested:
* Intel 7260, STA mode
iwm0: <Intel Dual Band Wireless AC 7260> mem 0xf1400000-0xf1401fff irq 17 at device 0.0 on pci2
iwm0: hw rev 0x140, fw ver 16.242414.0, address xx:xx:xx:xx:xx:xx
In r304870, refcount handling was lifted out into a common OTP/SPROM code
path, but the refcount assertions in chipc_disable_sprom_pins() were not
updated accordingly; this triggered an assertion on BCM4331 devices when
releasing a SPROM pin reservation.
Approved by: adrian (mentor, implicit)
Make virtio_console(4) create `/dev/vtcon/<port_name>` alias pointing
to /dev/ttyVx.y upon receiving PORT_NAME (id = 7) event over the control
queue.
Approved by: trasz
MFC after: 1 month
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D7182
When mlx5e_sq_xmit() returns an error code and the mbuf pointer is set,
we should not free the mbuf, because the caller will keep the mbuf in
the drbr. Make sure the mbuf pointer is correctly set upon function
exit.
Sponsored by: Mellanox Technologies
MFC after: 1 week
The hardware MTU size can't be set to a value less than 1500 bytes due
to side-band management support. Allow setting the software MTU size
below 1500 bytes, thus creating a mismatch between hardware and
software MTU sizes.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Try to reuse code to setup sendqueues when possible by making some static
functions global. Further split the mlx5e_close_sq_wait() function to
separate out reusable parts.
Sponsored by: Mellanox Technologies
MFC after: 1 week
This change also reduces the size of the mlx5e_sq structure so that the last
queue_state element will fit into the previous cacheline and then the mlx5e_sq
structure becomes one cacheline less for amd64.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Make some functions and structures global to allow for code reuse
when creating rate limiting sendqueues.
Sponsored by: Mellanox Technologies
MFC after: 1 week
Move setting of CQ moderation mode together with the other
CQ moderation parameters. Pass completion event vector as
a separate argument to mlx5e_open_cq(), because its value is
different for each call. Pass mlx5e_priv pointer instead of
mlx5e_channel pointer so that code can be used by rate
limiting sendqueues.
Sponsored by: Mellanox Technologies
MFC after: 1 week
This change allows for reusing the transmit path for so called
rate limited senqueues. While at it optimise some pointer lookups
in the fast path.
Sponsored by: Mellanox Technologies
MFC after: 1 week
- Add new firmware commands and update existing ones.
- Add more firmware related structures and update existing ones.
- Some minor fixes, like adding missing \n to some prints.
Sponsored by: Mellanox Technologies
MFC after: 1 week
come up as 't6nex' nexus devices with 'cc' ports hanging off them.
The T6 firmware and configuration files will be added as soon as they
are released. For now the driver will try to work with whatever
firmware and configuration is on the card's flash.
Sponsored by: Chelsio Communications
mutexes or using any callouts when active.
Trying to lock a mutex when KDB is active or the scheduler is stopped
can result in infinite wait loops. The same goes for calling callout
related functions which in turn lock mutexes.
If the USB controller at which a USB keyboard is connected is idle
when KDB is entered, polling the USB keyboard via USB will always
succeed. Else polling may fail depending on which state the USB
subsystem and USB interrupt handler is in. This is unavoidable unless
KDB can wait for USB interrupt threads to complete before stalling the
CPU(s).
Tested by: Bruce Evans <bde@freebsd.org>
MFC after: 4 weeks
- ifnet.if_mtu does not require explicit setting.
- ifnet.if_hdrlen must be set after ether_ifattach().
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7873
