The delay defaults to 1 sec (as it always has) unless we've done
a ~p in interactive mode or we've actually detected a HDLC frame.
This is now cleanly implemented (via async timers) so that it is
possible for LCP to come up despite the delay if an LCP REQ is
received.
This will hopefully solve situations with slow servers or slirp
scenarios (where ECHO is left on the port for a second or so before
the peer enters packet mode).
Also, ~p in interactive mode no longer changes the value of the default
openmode delay and -dedicated mode enters packet mode in the right state
according to the value of openmode.
(I completely mis-read the rfc last time 'round!)
This means:
o Better CCP/WARN Reset diagnostics.
o After we've sent a REQ and before we've received an ACK, we drop
incoming compressed data and send another REQ.
o Before sending an ACK, re-sequence all pending PRI_NORMAL data in
the modem queue so that pending packets won't get to the peer
*after* the ResetAck.
o Send ACKs with the `identifier' from the REQ frame.
o After we've received a correct ACK, duplicate ACKs are ok (and will
reset our history).
o Incorrect ACKs (not matching the last REQ) are moaned about and dropped.
Also,
o Calculate the correct FCS after compressing a packet. DEFLATE
*may* produce an mbuf with more than a single link in the chain,
but HdlcOutput didn't know how to calculate the FCS :-(
o Make `struct fsm'::reqid a u_char, not an int.
This fix will prevent us from sending id `255' 2,000,000,000 times
before wrapping to `0' for another 2,000,000,000 sends :-/
o Bump the version number a little.
The end result: DEFLATE now works over an unreliable link layer.
I can txfr a 1.5Mb kernel over a (rather bad) null-modem
cable at an average of 21679 bytes per second using rcp.
Repeat after me: Don't test compression using a loopback ppp/tcp setup as
we never lose packets and therefore never have to reset!
interactive mode.
Use `netfd' in fcntl() and tc[gs]etattr() calls rather than
the hard coded descriptor 0.
Use _FILENO constants from unistd.h
This un-breaks things after my recent `close(0)' in interactive
mode.
Close STDIN_FILENO, and open _PATH_TTY O_RDONLY as `netfd'. This
has the effect of allowing `show route' to output more than about
a page of data (on FreeBSD, not OpenBSD....). I have no idea why,
except that it was a direct consequence of the tcsetattr() in
TtyCommandMode(). My previous fix (closing descriptor 0) `fixed'
this because all calls to tcsetattr() failed :-(
strcpy(a, b); /* a and b are the same size */
with
strncpy(a, b, sizeof(a));
a[sizeof(a)-1] = '\0';
Making the code `correct at a glance'.
Suggested by: Theo de Raadt <deraadt@cvs.openbsd.org>
Remove extraneous decls.
Add ``const'' to several places.
Allow ``make NOALIAS=1'' to remove IP aliasing.
Merge with OpenBSD - only the Makefiles vary.
We can now survive a compile with
-Wall -Wbad-function-cast -Wcast-align -Wcast-qual
-Winline -Wmissing-declarations -Wmissing-prototypes
-Wnested-externs -Wpointer-arith -Wredundant-decls
-Wshadow -Wstrict-prototypes -Wwrite-strings -Wchar-subscripts
(although the Makefile just contains -Wall).
Stay as the invoking uid as much as possible.
Execution as a normal user is still forbidden for now,
so these changes are pretty ineffective.
The next commit will implement the modifications suggested
on -hackers a number of days ago.
o Report modem connect time properly
o Report bytes in/out over physical media
o Fix phases (TERMINATE is *higher than* DEAD)
o Do a LayerFinish from LcpDown
o Bring down IPCP & CCP when we enter PHASE_TERMINATE
o Give a new prompt when we go to PHASE_DEAD
o Stop the modem timer properly when idle
o Treat sig 15 like an exiting carrier loss
o Log (DEBUG) offline & online transitions
o Add missing $Id$s
o Move extern decls from .c -> .h files
o Staticize
o Remove #includes from .h files
o style(9)ify includes
o bcopy -> memcpy
bzero -> memset
bcmp -> memcmp
index -> strchr
rindex -> strrchr
o Move timeout.h -> timer.h (making it consistent w/ timer.c)
o Add -Wmissing-prototypes
file get created. We don't create lock files over non-tty
connections, but we *do* create lock files in -direct mode.
This leaves us capable of adding utmp/wtmp support for
successful pap & chap logins (coming soon).
close(1);
close(2);
x = open(ctermid(NULL), O_RDWR|O_NONBLOCK);
close(0)
on a tty causes select() to return an exception for descriptor x !
This is the case in RELENG_2_2, but not in 2.2.2. I'm not sure why.
Instead of doing the x=open() and close(0), we just do x=0 now.
Problem pointed out by: Greg Lehey <grog@lemis.com>
Tomi Vainio <tomppa@fidata.fi>
isatty(1) ! Keep 0 open for this till the modem's
been set up by either dup()ing 0 or by opening
ctermid(NULL) (if isatty(0)).
Discussed problem with: Tomi Vainio <tomppa@fidata.fi>
Made it finally dawn on me: Angelo Turetta <ATuretta@stylo.it>
o Output the correct device for "show modem"
while in -direct mode.
o Cosmetic: Moan a bit more when we can't open
the [modem] device.
o Call OpenModem() in a more "natural" way.
o Add some LogDEBUG in OpenModem().
o Style police
o Make hangup abort the current connection, not
necessarily exiting (-auto/-ddial).
o Trap HUP and INT during DoChat and abort the
connection attempt. This means you can now
type "dial" and change your mind with ^C, or
HUP the process to stop it dialing.
Slapped into doing it by: Chuck Robey <chuckr@glue.umd.edu>
o Allow "set var" with no args to blank var (don't req "").
o Zero VarTerm ASAP if not in interactive mode.
o Never print anything to stdout in -direct mode.
o Count redial when failing to open modem.
o Increase device size to 40 characters (for host:port).
o Remove missed "if (fd == 0) fd = 1;".
o Don't give up on incoming non-terminal connections.
o Use syslog
o Remove references to stdout/stderr (incl perror())
o Introduce VarTerm - the interactive terminal or zero
o Allow "set timeout" to affect current session
o Change "set debug" to "set log"
o Allow "set log [+|-]flag"
o Make MSEXT and PASSWDAUTH stuff the default
o Move all #ifdef DEBUG stuff into the code - this
shouldn't be too much overhead. It's now controlled
with "set log +debug"
o Add "set log command, debug, tun, warn, error, alert"
o Remove cdefs.h, and assume an ansi compiler.
o Improve all diagnostic output
o Don't trap SIGSEGV
o SIGHUP now terminates again (log files are controlled
by syslog)
o Call CloseModem() when changing devices
o Fix parsing of third arg of "delete"
I think this fixes the "magic is same" problems that some
people have been experiencing.
The man page is being rewritten. It'll follow soon.
alias commands simply won't work. Only root may specify the
location of the alias lib (otherwise, it's hard-coded).
Make logprintf silently fail if LogOpen hasn't been called.
Suggested by: eivind
of reconnect & -background.
o Fix reconnect anomolies.
o Make reconnect apply to failed LQR hangups (& mention in man page).
o Make reconnect effective in -background mode.
o Listen on socket in -background mode.
o Try all phone numbers in -background mode.
o Insist on system arg in -background mode.
o Make a control-connection close command exit in -background mode.
o Output status message to stdout on exit of parent in -background mode.
o Don't notify parent of success too soon.
o Describe termination EX_* code.
o Miscelaneous diagnostic corrections.
o Remove redundant connect_time from modem.c.
o Don't repeatedly DownConnection().
the connection after an unexpected loss of carrier:
set reconnect timer ntries
The man page warns against using this command when your
timeout value is slightly more than the other sides :{}
Suggested by: burton@bsampley.vip.best.com (Burton Sampley)
in uu_lock(). Add uu_lockerr() for turning the results of
uu_lock into something printable. Remove bogus section in man page
about race conditions allowing both processes to get the lock.
Include libutil.h and use uu_lock() correctly where it should.
Suggested by: ache@freebsd.org
we need now.
Don't assume that file descriptor can't be 0 (many places)
Protect FD_* macros from being used with negative descriptors
Shorten MS EXT show help to fit 80 cols
