from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
to kproc_xxx as they actually make whole processes.
Thos makes way for us to add REAL kthread_create() and friends
that actually make theads. it turns out that most of these
calls actually end up being moved back to the thread version
when it's added. but we need to make this cosmetic change first.
I'd LOVE to do this rename in 7.0 so that we can eventually MFC the
new kthread_xxx() calls.
After discussion with Sam, switch back to use firmware(9) instead of
having the firmware in hex format.
Put the binary firmware uuencoded into sys/contrib/dev/npe, and slap a
LICENSE file, as found on the Intel website.
Approved by: re (blanket), mux (mentor)
MFC After: 1 week
This patch was part of ACPI-CA 20070508 release and the
following is excerpt from its change log:
Fixed a problem where the Global Lock handle was not properly
updated if a thread that acquired the Global Lock via executing
AML code then attempted to acquire the lock via the
AcpiAcquireGlobalLock interface. Reported by Joe Liu.
Approved by: re (kensmith)
Tested by: ambrisko
Obtained from: Intel
value, so we don't run out of KVA. The default vnodes limit fits better for
UFS, but ZFS allocated more file system specific memory for a vnode than UFS.
Don't touch vnodes limit if we detect it was tuned by system administrator
and restore original value when ZFS is unloaded.
This isn't final fix, but before we implement something better, this will
help to stabilize ZFS under heavy load on i386.
Approved by: re (bmah)
ICMP error message, do not access th_flags. The field is beyond
the first eight bytes of the header that are required to be present
and were pulled up in the mbuf.
A random value of th_flags can have TH_SYN set, which made the
sequence number comparison not apply the window scaling factor,
which led to legitimate ICMP(v6) packets getting blocked with
"BAD ICMP" debug log messages (if enabled with pfctl -xm), thus
breaking PMTU discovery.
Triggering the bug requires TCP window scaling to be enabled
(sysctl net.inet.tcp.rfc1323, enabled by default) on both end-
points of the TCP connection. Large scaling factors increase
the probability of triggering the bug.
PR: kern/115413: [ipv6] ipv6 pmtu not working
Tested by: Jacek Zapala
Reviewed by: mlaier
Approved by: re (kensmith)
Rev 1.9 introduced another path where machclk_freq would be initialized
before the rest of setup was done (i.e. initializing the callout). Make
the one-time initialization a separate function and make init_machclk()
able to be called multiple times, any time. We depend on tsc_freq first
being updated from the highest priority eventhandler, thus we run last
and call init_machclk() to set machclk_freq. Also, don't initialize
static variables to 0.
Tested by: Eygene Ryabinkin
Approved by: re
implementing some of them using existing ones.
- Allow to compile ZFS on all archs and use atomic operations surrounded
by global mutex on archs we don't have or can't have all atomic
operations needed by ZFS.
1. Pass locking flags to VFS_ROOT().
2. Check v_mountedhere while the vnode is locked.
3. Always return locked vnode on success.
Change 1 fixes problem reported by Stephen M. Rumble - after
zfs_vfsops.c,1.9 change, zfs_root() no longer locks the vnode
unconditionally and traverse() didn't pass right lock type to
VFS_ROOT(). The result was that kernel paniced when .zfs/ directory
was accessed via NFS.
based on individual fields beeing set. This doesn't work for setattr replay,
because va_type is set there, so we add AT_TYPE flag to va_mask, which won't
be accepted by zfs_setattr().
Reported by: kris
initialization is complete. This fixes some root-on-ZFS
configurations.
Reported by: Bruno Damour <freebsd.ruomad@free.fr>
Tested by: Bruno Damour <freebsd.ruomad@free.fr>
Deal with IPv6 routing headers (see FreeBSD-SA-07:03.ipv6 for background)
Block IPv6 packets with routing headers by default, unless 'allow-opts'
is specified. Block RH0 unconditionally. Deal with ip6_plen 0.
MFC after: 1 week
Discussed with: mlaier
and show up with different names: first try to open provider using
remembered name and compare its ident, if equal, this is our provider,
if not equal or there is no provider with such name, find provider with
remembered ident and don't care about the name.
non-mapped data as possible at once and not page-by-page. Which this change we
combain I/Os, but also saves many VM_OBJECT_UNLOCK()/VM_OBJECT_LOCK()
operations.
Simple 'fsx -l 33554432 -o 524288 -N 10000 /tank/fsx' test shows ~23%
performance increase.
- vm_page_undirty() is enough (instead of vm_page_set_validclean()), but it has
to be called before we write the data in case someone makes page dirty after
our write, but before our vm_page_undirty() call.
- Always dmu_write, not matter if uiomove() succeeded, because it could
partially be ok and we would lose some changes.
All good ideas from: ups
in all other file system on FreeBSD (instead from inactive() method).
A nice side-effect of this change, except that it speedups file system
when mmaped file are often open/closed, is that it makes FreeBSD's
namecache work:)
This fixes slow operations on mmaped files, because without this fix,
pages were written to disk multiple times.
If one is looking for even greater speed up for such operation, he should
disable ZIL (by setting vfs.zfs.zil_disable to 1 in /boot/loader.conf).
Disabling ZIL makes fsx run ~9 times faster.
o Fix linewrap issues.
o Fix two typos (s/Recomended/Recommended/ and s/tunning/tuning/)
o Remove a couple of extra instances of the word "of".
o Update names of kmem_size variables.
Approved by: pjd
- Move FreeBSD-specific code to zfs_freebsd_*() functions in zfs_vnops.c
and keep original functions as similar to vendor's code as possible.
- Add various includes back, now that we have them.
macro, as za_first_integer field also contains type. This should be fixed in
ZFS itself, but this bug is not visible on Solaris, because there, type is
not stored in za_first_integer. On the other hand it will be visible on
MacOS X.
Reported by: Barry Pederson <bp@barryp.org>
@118370 Correct typo.
@118371 Integrate changes from vendor.
@118491 Show backtrace on unexpected code paths.
@118494 Integrate changes from vendor.
@118504 Fix sendfile(2). I had two ways of fixing it:
1. Fixing sendfile(2) itself to use VOP_GETPAGES() instead of
hacking around with vn_rdwr(UIO_NOCOPY), which was suggested
by ups.
2. Modify ZFS behaviour to handle this special case.
Although 1 is more correct, I've choosen 2, because hack from 1
have a side-effect of beeing faster - it reads ahead MAXBSIZE
bytes instead of reading page by page. This is not easy to implement
with VOP_GETPAGES(), at least not for me in this very moment.
Reported by: Andrey V. Elsukov <bu7cher@yandex.ru>
@118525 Reorganize the code to reduce diff.
@118526 This code path is expected. It is simply when file is opened with
O_FSYNC flag.
Reported by: kris
Reported by: Michal Suszko <dry@dry.pl>
unload instead of returning EBUSY. This check tells if there are mounted
ZFS file systems or not. We can't unload if there are mounted file systems.
Reported by: Andrey V. Elsukov <bu7cher@yandex.ru>
- Reduce default number of spa_zio_* threads to N*spa_zio_issue
plus N*spa_zio_intr threads per ZIO type, where N is the number
of CPUs.
- Put ZIO type number in thread's name.
which has already been freed by in_ifdetach(). With this cumulative change,
the removal of a member interface will not cause a panic in pfsync(4).
Requested by: yar
PR: 86848
than 2GB of RAM. This was because our physmem is long and 'physmem*PAGESIZE'
can be negative for more than 2GB of memory.
Reported by: Andrey V. Elsukov <bu7cher@yandex.ru>
It is not yet tested by Andrey, so there can be other problems, but this
was definiately a bug, so I'm committing a fix now.
- Tune number of namecache entires better (based on desiredvnodes).
- Handle vfs_lowvnodes event by releasing requested number of name cache
entries, but no less than 5%.
Reported by: simokawa
- Allow to shrink ARC down to 16MB (instead of 64MB).
- Set arc_max to 1/2 of kmem_map by default.
- Start freeing things earlier when low memory situation is detected.
- Serialize execution of arc_lowmem().
I decided to setup minimum ZFS memory requirements to 512MB of RAM and 256MB of
kmem_map size. If there is less RAM or kmem_map, a warning will be printed.
World is cruel, be no better. In other words: modern file system requires
modern hardware:)
From ZFS administration guide:
"Currently the minimum amount of memory recommended to install a Solaris
system is 512 Mbytes. However, for good ZFS performance, at least one
Gbyte or more of memory is recommended."
ZFS file system was ported from OpenSolaris operating system. The code in under
CDDL license.
I'd like to thank all SUN developers that created this great piece of software.
Supported by: Wheel LTD (http://www.wheel.pl/)
Supported by: The FreeBSD Foundation (http://www.freebsdfoundation.org/)
Supported by: Sentex (http://www.sentex.net/)
cpufreq_pre_change is called before the change, giving each driver a chance
to revoke the change. cpufreq_post_change provides the results of the
change (success or failure). cpufreq_levels_changed gives the unit number
of the cpufreq device whose number of available levels has changed. Hook
in all the drivers I could find that needed it.
* TSC: update TSC frequency value. When the available levels change, take the
highest possible level and notify the timecounter set_cputicker() of that
freq. This gets rid of the "calcru: runtime went backwards" messages.
* identcpu: updates the sysctl hw.clockrate value
* Profiling: if profiling is active when the clock changes, let the user
know the results may be inaccurate.
Reviewed by: bde, phk
MFC after: 1 month
This change partially resolves the issue in the PR. Further architectural
fixes, in the form of reference counting, are needed.
PR: 86848
Reviewed by: yar
MFC after: 1 month
uuencoded format along with their respective LICENSE files.
- Add new share/doc/legal directory to BSD.usr.dist mtree file. This is the
place we install LICENSE files for restricted firmwares.
- Teach firmware(9) and kmod.mk about licensed firmwares. Restricted firmwares
won't load properly unless legal.<name>.license_ack is set to 1, either
via kenv(1) or /boot/loader.conf.
Reviewed by: mlaier, sam
Permitted by: Intel (via Andrew Wilson)
MFC after: 1 month
semantics.
- Stop testing bpf pointers for NULL. In some cases use
bpf_peers_present() and then call the function directly inside the
conditional block instead of the macro.
- For places where the entire conditional block is the macro, remove the
test and make the macro unconditional.
- Use BPF_MTAP() in if_pfsync on FreeBSD instead of an expanded version of
the old semantics.
Reviewed by: csjp (older version)
lookup early. This has some performance implications and should not be
enabled by default, but might help greatly in certain setups. After some
more testing this could be turned into a sysctl.
Tested by: avatar
LOR ids: 17, 24, 32, 46, 191 (conceptual)
MFC after: 6 weeks
o remove os-specific glue code; it's now the responsibility of
the driver
o add wackelf utility for patching the ELF magic number on arm
builds since noone can agree on how to mark a .o file as not
having any floating point instructions
o remove radar/dfs-related entry points; folks have finally
decided how to support dfs w/o polluting the hal
o properly recognize AR2424 chips (they were being rejected on
attach despite being fully supported)
o add HAL_CAP_RXORN_FATAL capability to control how RXORN errors
are handled; previously RXORN was always treated as fatal because
older chips required a reset; now we do not treat it as fatal
for "newer chips" (noone seems to know what the cutoff is so
this capability can be used to override the current guestimate)
o HAL_CAP_RXTSTAMP_PREC capability to export the number of bits
of precision for timestamp data returned in the rx descriptor
o remove public exposure of the compression buffer; it is chip
specific and never belonged in the public view
o change definition of HAL_INT_GLOBAL from an enum member to a
#define to workaround compilers that bitch about enum values
that appear overflow 31 bits
o add support for newer chips that can store the tkip mic key
together with the cipher key in a single key cache entry
o split tx/rx descriptor into a h/w section and a s/w portion;
this permits storing the s/w area in cached memory when the
h/w area is stored in uncached memory; this also shrinks
memory use since only one status block is needed while multiple
tx/rx descriptors may be required per frame
o add final transmit series index to the transmit descriptor status
so rate control algorithms don't need to grovel through h/w state
to find it
o remove ds_vdata field from the descriptor state as part of the
radar changes
o fix excessive stack usage for some 5212 rf backends
o correct rfkill handling when the pin polarity is 0 true
o correct handling of tsf wrap when reading 64-bit values
MFC after: 1 month
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
part of the hal distribution early on when the hal was built for
each os but it's been portable for a long time so move the os-specific
code out (and off the vendor branch)
o correct the copyright on ah_osdep.?; it was mistakenly given a
restricted license and not a dual-bsd/gpl license
o remove the module api definition as it was never used
o fixup include paths for move of ah_osdep.h
MFC after: 2 weeks
exists to allow the mandatory access control policy to properly initialize
mbufs generated by the firewall. An example where this might happen is keep
alive packets, or ICMP error packets in response to other packets.
This takes care of kernel panics associated with un-initialize mbuf labels
when the firewall generates packets.
[1] I modified this patch from it's original version, the initial patch
introduced a number of entry points which were programmatically
equivalent. So I introduced only one. Instead, we should leverage
mac_create_mbuf_netlayer() which is used for similar situations,
an example being icmp_error()
This will minimize the impact associated with the MFC
Submitted by: mlaier [1]
MFC after: 1 week
This is a RELENG_6 candidate
fix a bug in the input sanity check of DIOCCHANGERULE (not used by pfctl,
but third-party tools). a rule must have a non-empty replacement address
list when it's a translation rule but not an anchor call (i.e. "nat ...
->" needs a replacement address, but "nat-anchor ..." doesn't). the check
confused "rule is an anchor call" with "rule is defined within an anchor".
report from Michal Mertl, Max Laier.
Obtained from: OpenBSD
MFC after: 2 weeks
parameter that can specify configuration parameters:
o rev cloner api's to add optional parameter block
o add SIOCCREATE2 that accepts parameter data
o rev vlan support to use new api (maintain old code)
Reviewed by: arch@
any modifications to make it build as part of the FreeBSD kernel.
Now that the source appears to have stabilized, local changes will
happen on HEAD and will therefore cause affected files to be pulled
from the vendor branch.
o define HAL_SOFTC, HAL_BUS_TAG, and HAL_BUS_HANDLE to be machine
independent; this fixes portability issues with bsd systems
o add ah_disable api for turning off operation of both MAC and PHY
o add ah_getAntennaSwitch and ah_setAntennaSwitch api's for better control
of antenna usage and diversity
o add ah_setAckCTSRate and ah_setAckCTSRate for controlling tx rate of
h/w generated frames
o add ah_setBeaconTimers api for simpler setting of the beacon timer registers
o remove ah_waitForBeaconDone api
o add HAL_TXDESC_DURENA flag to enable h/w duration setting in tx descriptor
o correct documentation of min/max tx power units (.5 dBm)
o switch arm, mips, and powerpc builds to use functions for register
read/write operations
o fix sparc builds to not reference %g2 and %g3 registers
o add public builds for SoC's
MFC after: 1 month
speeds to perform below the desired bitrate and throughput will be erratic.
This makes queueing work on the Geode SC1100, K5 model 0 and IDT WinChip C6
processors.
MFC after: 3 days
o new chip support
o new platforms: powerpc-be-elf, sparc64-be-elf, and alpha-elf
(alpha is untested, others are known to work)
o many fixes and improvements
MFC after: 2 weeks
but not 'fragment reassemble'), which can cause some fragments to get
inserted into the cache twice, thereby violating an invariant, and panic-
ing the system subsequently.
Reviewed by: mlaier
MFC after: 1 day
"established" state.
Similar to OpenBSD's rev. 1.499 by joel but not breaking ABI.
Obtained from: OpenBSD (with changes)
Reported by: Bruno Afonso
MFC after: 3 days
X-MFC: together with local_flags
special handling when zero. This caused no PFSYNC_ACT_DEL message and thus
disfunction of pfflowd and state synchronisation in general.
Discovered by: thompsa
Good catch by: thompsa
MFC after: 7 days
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.
copy of Ethernet address.
- Change iso88025_ifattach() and fddi_ifattach() to accept MAC
address as an argument, similar to ether_ifattach(), to make
this work.
softc lists and associated mutex are now unused so these have been removed.
Calling if_clone_detach() will now destroy all the cloned interfaces for the
driver and in most cases is all thats needed to unload.
Idea by: brooks
Reviewed by: brooks
- Fix a typo in rsmisc.c and a style change for consistency.
This patch will also appear in future ACPI-CA release.
Submitted by: Robert Moore <robert dot moore at intel dot com>
Tested by: ru
descriptor. This should fix the "memory modified after free" panics. This
patch will appear in a future acpi-ca distribution.
Submitted by: Robert Moore <robert.moore / intel.com>
Tested by: Peter Holm
