will return success when the kernel is built without support of
the capability mode.
It is important to note, that I'm taking a more conservative approach
with these changes and it will be done in small steps.
Reviewed by: jhb
MFC after: 6 weeks
Differential Revision: https://reviews.freebsd.org/D18744
Architectures Software Developer’s Manual Volume 3"). Add the document
to SEE ALSO in bhyve.8 (and pet manlint here a bit).
Reviewed by: jhb, rgrimes, 0mp
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D17531
For tools that uses bhyve such like libvirt, it is important to be able to
probe what features are supported by the given bhyve binary.
To give more context, libvirt probes bhyve's capabilities in a not very
effective way:
- Running 'bhyve -h' and parsing output.
- To detect devices, it runs 'bhyve -s 0,dev' for every each device and
parses error output to identify if the device is supported or not.
PR: 2101111
Submitted by: novel
MFC after: 2 weeks
Relnotes: yes
Sponsored by: iXsystems Inc.
The bhyve(8) exit status indicates how the VM was terminated:
0 rebooted
1 powered off
2 halted
3 triple fault
The problem is when we have wrappers around bhyve that parses the exit
error code and gets an exit(1) for an error but interprets it as "powered off".
So to mitigate this issue and makes it less error prone for third part
applications, I have added a new exit code 4 that is "exited due to an error".
For now the bhyve(8) exit status are:
0 rebooted
1 powered off
2 halted
3 triple fault
4 exited due to an error
Reviewed by: @jhb
MFC after: 2 weeks.
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D16161
strdup(3) allocates memory for a copy of the string, does the copy and
returns a pointer to it. If there is no sufficient memory NULL is returned
and the global errno is set to ENOMEM.
We do a sanity check to see if it was possible to allocate enough memory.
Also as we allocate memory, we need to free this memory used. Or it will
going out of scope leaks the storage it points to.
Reviewed by: rgrimes
MFC after: 3 weeks.
X-MFC: r332298
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D15550
This commit adds a new debug server to bhyve. Unlike the existing -g
option which provides an efficient connection to a debug server
running in the guest OS, this debug server permits inspection and
control of the guest from within the hypervisor itself without
requiring any cooperation from the guest. It is similar to the debug
server provided by qemu.
To avoid conflicting with the existing -g option, a new -G option has
been added that accepts a TCP port. An IPv4 socket is bound to this
port and listens for connections from debuggers. In addition, if the
port begins with the character 'w', the hypervisor will pause the
guest at the first instruction until a debugger attaches and
explicitly continues the guest. Note that only a single debugger can
attach to a guest at a time.
Virtual CPUs are exposed to the remote debugger as threads. General
purpose register values can be read for each virtual CPU. Other
registers cannot currently be read, and no register values can be
changed by the debugger.
The remote debugger can read guest memory but not write to guest
memory. To facilitate source-level debugging of the guest, memory
addresses from the debugger are treated as virtual addresses (rather
than physical addresses) and are resolved to a physical address using
the active virtual address translation of the current virtual CPU.
Memory reads should honor memory mapped I/O regions, though the debug
server does not attempt to honor any alignment or size constraints
when accessing MMIO.
The debug server provides limited support for controlling the guest.
The guest is suspended when a debugger is attached and resumes when a
debugger detaches. A debugger can suspend a guest by sending a Ctrl-C
request (e.g. via Ctrl-C in GDB). A debugger can also continue a
suspended guest while remaining attached. Breakpoints are not yet
supported. Single stepping is supported on Intel CPUs that support
MTRAP VM exits, but is not available on other systems.
While the current debug server has limited functionality, it should
at least be usable for basic debugging now. It is also a useful
checkpoint to serve as a base for adding additional features.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D15022
from userland without the need to use sysctls, it allows the old
sysctls to continue to function, but deprecates them at
FreeBSD_version 1200060 (Relnotes for deprecate).
The command line of bhyve is maintained in a backwards compatible way.
The API of libvmmapi is maintained in a backwards compatible way.
The sysctl's are maintained in a backwards compatible way.
Added command option looks like:
bhyve -c [[cpus=]n][,sockets=n][,cores=n][,threads=n][,maxcpus=n]
The optional parts can be specified in any order, but only a single
integer invokes the backwards compatible parse. [,maxcpus=n] is
hidden by #ifdef until kernel support is added, though the api
is put in place.
bhyvectl --get-cpu-topology option added.
Reviewed by: grehan (maintainer, earlier version),
Reviewed by: bcr (manpages)
Approved by: bde (mentor), phk (mentor)
Tested by: Oleg Ginzburg <olevole@olevole.ru> (cbsd)
MFC after: 1 week
Relnotes: Y
Differential Revision: https://reviews.freebsd.org/D9930
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
this on the branch.
Original commit message:
Initial bhyve native graphics support.
This adds emulations for a raw framebuffer device, PS2 keyboard/mouse,
XHCI USB controller and a USB tablet.
A simple VNC server is provided for keyboard/mouse input, and graphics
output.
A VGA emulation is included, but is currently disconnected until an
additional bhyve change to block out VGA memory is committed.
Credits:
- raw framebuffer, VNC server, XHCI controller, USB bus/device emulation
and UEFI f/w support by Leon Dang
- VGA, console/g, initial VNC server by tychon@
- PS2 keyboard/mouse jointly done by tychon@ and Leon Dang
- hypervisor framebuffer mem support by neel@
Tested by: Michael Dexter, in a number of revisions of this code.
With the appropriate UEFI image, FreeBSD, Windows and Linux guests can
installed and run in graphics mode using the UEFI/GOP framebuffer.
Approved by: re (gjb)
A couple of minor memory size option related nits:
- use common name 'memsize' (instead of 'max-size' or just 'size')
- bhyve: update usage with memsize unit suffix, drop legacy "MB"
unit
- bhyveload: update usage with memsize unit suffix
- bhyve(8): document default size
- bhyveload(8): use memsize formatting like it's done
in bhyve(8)
Reviewed by: wblock, grehan
Approved by: re (kib), wblock, grehan
Differential Revision: https://reviews.freebsd.org/D6952
if vm_activate_cpu(..) fails when called from fbsdrun_addcpu(..)
MFC after: 1 week
PR: 203884
Reviewed by: grehan
Submitted by: William Orr <will@worrbase.com>
to the qemu one, and uses the same i/o ports but with different
messaging. Requires the 'bootrom' option to be enabled.
This is used by UEFI (and potentially other BIOSs/firmware) to
request information from bhyve. Currently, only the number of
vCPUs is made available, with more to follow.
A very large thankyou to Ben Perrault who helped out testing
an earlier version of this, and bhyve/Windows in general.
Reviewed by: tychon
Discussed with: neel
Sponsored by: Nahanni Systems
devmem is used to represent MMIO devices like the boot ROM or a VESA framebuffer
where doing a trap-and-emulate for every access is impractical. devmem is a
hybrid of system memory (sysmem) and emulated device models.
devmem is mapped in the guest address space via nested page tables similar
to sysmem. However the address range where devmem is mapped may be changed
by the guest at runtime (e.g. by reprogramming a PCI BAR). Also devmem is
usually mapped RO or RW as compared to RWX mappings for sysmem.
Each devmem segment is named (e.g. "bootrom") and this name is used to
create a device node for the devmem segment (e.g. /dev/vmm/testvm.bootrom).
The device node supports mmap(2) and this decouples the host mapping of
devmem from its mapping in the guest address space (which can change).
Reviewed by: tychon
Discussed with: grehan
Differential Revision: https://reviews.freebsd.org/D2762
MFC after: 4 weeks
"sleeping" state. This is done by forcing the vcpu to transition to "idle"
by returning to userspace with an exit code of VM_EXITCODE_REQIDLE.
MFC after: 2 weeks
The default remains localtime for compatibility with the original device model
in bhyve(8). This is required for OpenBSD guests which assume that the RTC
keeps UTC time.
Reviewed by: grehan
Pointed out by: Jason Tubnor (jason@tubnor.net)
MFC after: 2 weeks
Keep track of the next instruction to be executed by the vcpu as 'nextrip'.
As a result the VM_RUN ioctl no longer takes the %rip where a vcpu should
start execution.
Also, instruction restart happens implicitly via 'vm_inject_exception()' or
explicitly via 'vm_restart_instruction()'. The APIs behave identically in
both kernel and userspace contexts. The main beneficiary is the instruction
emulation code that executes in both contexts.
bhyve(8) VM exit handlers now treat 'vmexit->rip' and 'vmexit->inst_length'
as readonly:
- Restarting an instruction is now done by calling 'vm_restart_instruction()'
as opposed to setting 'vmexit->inst_length' to 0 (e.g. emulate_inout())
- Resuming vcpu at an arbitrary %rip is now done by setting VM_REG_GUEST_RIP
as opposed to changing 'vmexit->rip' (e.g. vmexit_task_switch())
Differential Revision: https://reviews.freebsd.org/D1526
Reviewed by: grehan
MFC after: 2 weeks
code. There are only a handful of MSRs common between the two so there isn't
too much duplicate functionality.
The VT-x code has the following types of MSRs:
- MSRs that are unconditionally saved/restored on every guest/host context
switch (e.g., MSR_GSBASE).
- MSRs that are restored to guest values on entry to vmx_run() and saved
before returning. This is an optimization for MSRs that are not used in
host kernel context (e.g., MSR_KGSBASE).
- MSRs that are emulated and every access by the guest causes a trap into
the hypervisor (e.g., MSR_IA32_MISC_ENABLE).
Reviewed by: grehan
VM-exit and ultimately on whether nRIP is valid. This allows us to update
the %rip after the emulation is finished so any exceptions triggered during
the emulation will point to the right instruction.
Don't attempt to handle INS/OUTS VM-exits unless the DecodeAssist capability
is available. The effective segment field in EXITINFO1 is not valid without
this capability.
Add VM_EXITCODE_SVM to flag SVM VM-exits that cannot be handled. Provide the
VMCB fields exitinfo1 and exitinfo2 as collateral to help with debugging.
Provide a SVM VM-exit handler to dump the exitcode, exitinfo1 and exitinfo2
fields in bhyve(8).
Reviewed by: Anish Gupta (akgupt3@gmail.com)
Reviewed by: grehan
change 0 means success and non-zero means failure.
This also helps to eliminate VMEXIT_POWEROFF and VMEXIT_RESET as return values
from VM-exit handlers.
CR: D480
Reviewed by: grehan, jhb
The faulting instruction needs to be restarted when the exception handler
is done handling the fault. bhyve now does this correctly by setting
'vmexit[vcpu].inst_length' to zero so the %rip is not advanced.
A minor complication is that the fault injection APIs are used by instruction
emulation code that is shared by vmm.ko and bhyve. Thus the argument that
refers to 'struct vm *' in kernel or 'struct vmctx *' in userspace needs to
be loosely typed as a 'void *'.
A nested exception condition arises when a second exception is triggered while
delivering the first exception. Most nested exceptions can be handled serially
but some are converted into a double fault. If an exception is generated during
delivery of a double fault then the virtual machine shuts down as a result of
a triple fault.
vm_exit_intinfo() is used to record that a VM-exit happened while an event was
being delivered through the IDT. If an exception is triggered while handling
the VM-exit it will be treated like a nested exception.
vm_entry_intinfo() is used by processor-specific code to get the event to be
injected into the guest on the next VM-entry. This function is responsible for
deciding the disposition of nested exceptions.
similar to -g.)
- Document -U to set the SMBIOS UUID.
- Add missing options to the usage output and to the manpage Synopsis.
- Don't claim that bvmdebug is amd64-only (it is also a device, not an
option).
it implicitly in vmm.ko.
Add ioctl VM_GET_CPUS to get the current set of 'active' and 'suspended' cpus
and display them via /usr/sbin/bhyvectl using the "--get-active-cpus" and
"--get-suspended-cpus" options.
This is in preparation for being able to reset virtual machine state without
having to destroy and recreate it.
the UART FIFO.
The emulation is constrained in a number of ways: 64-bit only, doesn't check
for all exception conditions, limited to i/o ports emulated in userspace.
Some of these constraints will be relaxed in followup commits.
Requested by: grehan
Reviewed by: tychon (partially and a much earlier version)
the legacy 8259A PICs.
- Implement an ICH-comptabile PCI interrupt router on the lpc device with
8 steerable pins configured via config space access to byte-wide
registers at 0x60-63 and 0x68-6b.
- For each configured PCI INTx interrupt, route it to both an I/O APIC
pin and a PCI interrupt router pin. When a PCI INTx interrupt is
asserted, ensure that both pins are asserted.
- Provide an initial routing of PCI interrupt router (PIRQ) pins to
8259A pins (ISA IRQs) and initialize the interrupt line config register
for the corresponding PCI function with the ISA IRQ as this matches
existing hardware.
- Add a global _PIC method for OSPM to select the desired interrupt routing
configuration.
- Update the _PRT methods for PCI bridges to provide both APIC and legacy
PRT tables and return the appropriate table based on the configured
routing configuration. Note that if the lpc device is not configured, no
routing information is provided.
- When the lpc device is enabled, provide ACPI PCI link devices corresponding
to each PIRQ pin.
- Add a VMM ioctl to adjust the trigger mode (edge vs level) for 8259A
pins via the ELCR.
- Mark the power management SCI as level triggered.
- Don't hardcode the number of elements in Packages in the source for
the DSDT. iasl(8) will fill in the actual number of elements, and
this makes it simpler to generate a Package with a variable number of
elements.
Reviewed by: tycho
This has not added a lot of value when debugging bhyve issues while greatly
increasing the time and space required to store the core file.
Passing the "-C" option to bhyve(8) will change the default and dump guest
memory in the core dump.
Requested by: grehan
Reviewed by: grehan
a 'hostcpu'. The new format of the argument string is "vcpu:hostcpu".
This allows pinning a subset of the vcpus if desired.
It also allows pinning a vcpu to more than a single 'hostcpu'.
Submitted by: novel (initial version)
