we're preventing now with this policy. However, these edge cases
should be rare and all that set MK_FOO directly.
WITH_FOO and WITHOUT_FOO both being defined now result in the
non-default behavior happening silently. Users needing determinism
here fall into the edge case exception for MK_FOO setting.
code from the rest. Include bsd.opts.mk in bsd.own.mk to preserve
current behavior. Future revisions will replace the inclusion of
bsd.own.mk elsewhere with bsd.opts.mk or a more appropriate new
file that's still being finalized.
building clang and/or gcc as the bootstrap compiler. Normally, the
default compiler is used. WITH_CLANG_BOOTSTRAP and/or
WITH_GCC_BOOTSTRAP will enable building these compilers as part
bootstrap phase. WITH/WITHOUT_CLANG_IS_CC controls which compiler is
used by default for the bootstrap phase, as well as which compiler is
installed as cc. buildworld now successfully completes building the
cross compiler with WITHOUT_CLANG=t and WITHOUT_GCC=t and produces a
built system with neither of these included.
Similarlly, MK_BINUTILS_BOOTSTRAP controls whether binutils is built
during this phase.
WITHOUT_CROSS_COMPILER will now force MK_BINUTILS_BOOTSTRAP=no,
MK_CLANG_BOOTSTRAP=no and MK_GCC_BOOTSTRAP=no.
BOOTSTRAP_COMPILER was considered, but rejected, since pc98 needs both
clang and gcc to bootstrap still. It should be revisisted in the
future if this requirement goes away. Values should be gcc, clang or
none. It could also be a list.
The odd interaction with Xfoo cross/external tools needs work, but
is beyond the scope of this change as well.
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
because they pollute the POSIX environment, which doens't allow
for these extentions. ctf conversions are really only relevant when
used in coordination with the rest of the bsd*.mk system anyway.
Leave them in place for the normal, non-posix enviornment since
they are quite useful there.
all timestamps in static libraries to 0 so that consecutive builds
from the same source, even on different machines, produce identical
libraries.
MFC after: 3 weeks
being defined. The system works fine without it (because GNUCXX isn't
built when WITHOUT_CXX is defined), and it is one of the few places we
test WITHOUT_FOO instead of MK_FOO in the base system. Simply
eliminate it to solve both problems. Also, minor tweak to make it
clearer that the default is always NO for GNUGCC on i386.
introduced, the meaning of WITH_FDT changed from 'do FDT in boot
loader and build dtc compiler' to be simply 'do FDT things in the boot
loader'. Now that we test for FDT in the architecture specific files,
this test here is now redunant and encourages bad behavior, so just
eliminate it and make it always yes. Those architectures whose boot
loaders don't support FDT already omit it when it is set to yes
anyway.
guess wrong for buildkernel when CC=gcc49, say. Eliminate all the
guessing. COMPILER_TYPE propigates properly on its own, if specified,
and we guess it correctly otherwise lower in the build. Also, fix
conditionals for armv6hf when using an external compiler chain. They
were broken before, but unused. Also, prefer checking the compiler
type over CLANG_IS_CC since the latter is only supposed to be used to
determine what symlinks to install (more fixes to follow).
when both WITH_FOO and WITHOUT_FOO are set. Use this where
possible. Only disallow setting of MK_FOO on the command line. This
was preferable to inventing a new mechanism or fixing the undef bug
(bin/183762) which precludes users from turning off anything we turn
off for parts of the build with WITHOUT_FOO prior to this.
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
is useful primarily on a system used for cross-building, when you have a
set of flags to apply to the TARGET_ARCH being cross-built but don't want
those settings applied to building the cross-tools or other components that
run on the build host machine.
The new suite.test.mk file contains all the logic needed to install test
programs under /usr/tests/ and to support Kyua as the run-time engine.
This file is included by default by bsd.test.mk so Makefiles do not need
to care about its existence.
Specific Makefiles can define NOT_FOR_TEST_SUITE to indicate that whatever
test programs they are building are not supposed to be installed under
/usr/tests/ nor run by Kyua. (The effect of passing this setting is that
suite.test.mk is simply not included.)
NOT_FOR_TEST_SUITE should never be used by Makefiles in the base system.
This functionality is provided so that third-parties can hook in their
own test code, with different semantics, if they wish. This was asked
for by sjg@.
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
(1) Invoke cpp to bring in files via #include (although the old
/include/ stuff is supported still).
(2) bring in files from either vendor tree or freebsd-custom files
when building.
(3) move all dts* files from sys/boot/fdt/dts to
sys/boot/fdt/dts/${MACHINE} as appropriate.
(4) encode all the magic to do the build in sys/tools/fdt/make_dtb.sh
so that the different places in the tree use the exact same logic.
(5) switch back to gpl dtc by default. the bsdl one in the tree has
significant issues not easily addressed by those unfamiliar with
the code.
UCL is heavily infused by nginx configuration as the example of a convenient
configuration system. However, UCL is fully compatible with JSON format and is
able to parse json files.
UCL is used by pkg(8) for its configuration file as well for the manifest format
in packages, it will be used in base for the pkg boostrap (signature checking
and configuration file parsing.)
libucl has been developped and is maintained by vsevolod@
bsd.sys.mk, where it really belongs. This also causes the flag to get
added when clang is *not* the default system compiler, but is still
used, e.g. by setting WITH_CLANG_IS_CC manually.
MFC after: 3 days
directives, since on sparc64 we must still GNU as, which does not
support those directives.
Note there are several programs and libraries in our tree, which are
always compiled with -g, even if DEBUG_FLAGS is not set by the user!
It is a small and lightweight Mail Transport Agent.
It accepts mails from locally installed Mail User Agents (MUA) and delivers the
mails either locally or to a remote destination. Remote delivery includes
several features like TLS/SSL support, SMTP authentication and NULLCLIENT.
Make dma conditional to new WITHOUT_DMA option and make it respect WITHOUT_MAIL
Reviewed by: peter
Discussed with: emaste, bz, peter
