This should help reduce confusion between syscon/syscons a little bit.
syscon is a resource generally modeled by FDT platforms, and not to be
confused with syscons.
Allow more flexibility by kobj'ifying syscon and splitting out fdt specific
bits in preparation of a move to the extres framework.
The generic fdt driver has been moved to syscon_generic.c and the fdt
requirement has been removed from the syscon interface, as is common to the
extres framework.
Reviewed by: strejda
Differential Revision: https://reviews.freebsd.org/D13521
ISA PNP card support (replace by hand version in if_ed). Move module
declarations to the end of some files. Fix PCCARD_PNP_INFO to use
nitems(). Remove some stale comments about pc98, turns out the comment
was simply wrong.
about CIS3/CIS4, including studies I've done on my large collection of
PC Cards bought off e-bay over the years since the original entry as
well as conversations I've had at conferences.
leaves the firmware event queue (fwq) as the only queue that can take
interrupts for others.
This simplifies cfg_itype_and_nqueues and queue allocation in the driver
at the cost of a little (never?) used configuration. It also allows
service_iq to be split into two specialized variants in the future.
MFC after: 2 months
Sponsored by: Chelsio Communications
While the BSD-2-Clause license is there, the GPLv2 is also present.
I am unsure of the implications of having both licenses as they are here.
I'll just leave it untagged and open for interpretation.
This allows one to specify, for example, that if there's an igb card
in bus 12, slot 0, function 0, it should be assigned igb5. If there
isn't, or there's one in a different slot, normal numbering rules
apply (hinted units are skipped). Adding 'hint.igb.5.at="pci12:0:0"'
or 'hint.igb.5.at="pci0:12:0:0"' to /boot/device.hints will accomplish
this. The double quotes are important.
The kernel only accepts the strings (in shell notation):
pci$d:$b:$s:$f
and pci$b:$s:$f
where $d is the pci domain, $b is the pci bus number, $s is the slot
number and $f is the function number. A string compare is done with
the current device to avoid another string parser in the kernel. All
numbers are unsigned decimal without leading zeros.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13546
MD_READONLY flag for the md device automatically instantiated during
kernel init for an mdroot filesystem.
Note that there is specifically and by design no tunable or sysctl
control over this feature. Without this option, you already have control
over whether the mdroot fs is writeable using vfs.root.mountfrom.options
from loader(8), the root_rw_mount rcvar, and by using "mount -u[rw] /"
or equivelent on the fly. This option is being added to provide a way
to make the mdroot fs truly immutable before userland code begins running.
Differential Revision: https://reviews.freebsd.org/D13411
Initial update to the ixgbe PF and VF drivers to support the iflib interface.
The PF driver version is bumped to 4.0.0, and the VF driver version is bumped to 2.0.0.
Special thanks to sbruno@ for the support in helping make this conversion happen.
Submitted by: Jeb Cramer <cramerj@intel.com>, Krzysztof Galazka (Chris) <krzysztof.galazka@intel.com>, Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: sbruno@, shurd@, #IntelNetworking
Tested by: Jeffrey Pieper <jeffrey.e.pieper@intel.com>, Sergey Kozlov <kozlov.sergey.404@gmail.com>
Sponsored by: Limelight Networks, Intel Corporation
Differential Revision: https://reviews.freebsd.org/D11727
Previously, it silently only supported auto, instead, log a message
indicating why only auto is supported.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D13358
It's possible to change the SFP module when link is down, which would
change the available media types. This is part of D13358.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
New Stratus bnxt devices require support for short HWRM commands for VFs
to function. Enable their use, but only use them if it's both supported
and required... prefer the long HWRM commands when possible.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Differential Revision: https://reviews.freebsd.org/D13269?id=36180
The firmware is always in little endian, use htole*() for all request fields
larger than one byte.
Submitted by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Sponsored by: Broadcom Limited
Email address has changed, uses consistent name (Matthew, not Matt)
Reported by: Matthew Macy <mmacy@mattmacy.io>
Differential Revision: https://reviews.freebsd.org/D13537
The IA32 memory model guarantees that all writes are seen in the program
order. Also, any access to the uncacheable memory flushes the store
buffers. As the consequence, SFENCE instruction is (almost) never needed,
in particular, it is not needed to ensure the correct order of updates as
seen by a PCIe device.
Use atomic_thread_fence_rel() instead of wb() to only emit compiler barriers
on x86 there. Other architectures get the right barrier instruction as
well.
Reviewed by: hselasky
Sponsored by: Mellanox Technologies
MFC after: 1 week
By the ACPI standard (ACPI 5 chapter 8.4 Declaring Processors) Processors
can be implemented in 2 distinct ways:
* Through a Processor object type (which provides P_BLK)
* Through a Device object type
Prior to this change, the FreeBSD driver only supported the former. AMD
Epyc / Poweredge systems we are testing both implement the latter only. Add
the missing support.
Because P_BLK is not defined in the device object case, C-states entering
must be completely controlled via _CST methods rather than P_LVL2/3.
John Baldwin points out that ACPI 6.0 formally deprecates the Processor
keyword, so eventually processors will only be enumerated as Device objects.
Submitted by: attilio
Reviewed by: jhb, markj, Anton Rang <rang AT acm.org>
Relnotes: maybe
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13457
bug that requires 'hands off' for a period of time (2.3s) before we
check the RDY bit. Sicne this is a very odd quirk for a very limited
selection of drives, do this as a quirk. This prevented a successful
reset of the card when the card wedged.
Also, make sure that we comply with the advice from section 3.1.5 of
the 1.3 spec says that transitioning CC.EN from 0 to 1 when CSTS.RDY
is 1 or transitioning CC.EN from 1 to 0 when CSTS.RDY is 0 "has
undefined results". Short circuit when EN == RDY == desired state.
Finally, fail the reset if the disable fails. This will lead to a
failed device, which is what we want. (note: nda device needs
work for coping with a failed device).
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13389
- Fix reference of uninitialized error value in bhndb_generic_resume() if
the dynamic window count is 0.
- Fix incorrect bhnd_pmu(4) UPTME_MASK and PLL0_PC2_WILD_INT_MASK
constants.
- Variable definitions referenced by our generated SPROM layouts will never
be NULL, but add explicit asserts to make that clear.
- Add missing variable initialization in bhnd_nvram_sprom_ident().
- Fix leak of driver array in bhnd_erom_probe_driver_classes().
- Fix zero-length memset() in bhndb_pci_eio_init().
- Fix an off-by-one error and potential invalid OOBSEL bit shift operation
in bcma_dinfo_init_intrs().
- Remove dead code in siba_suspend_hw().
- Fix duplicate call to bhnd_pmu_enable_regulator() in both the enable and
disable code paths of bhnd_compat_cc_pmu_set_ldoparef().
Reported by: Coverity
CIDs: 1355194, 1362020, 1362022, 1373114, 1366563, 1373115,
1381569, 1381579, 1383555, 1383566, 1383571
Sponsored by: The FreeBSD Foundation
- Add the BCM4322X D11 core revision and missing BCM43224 PCI device ID to
our device tables.
- Disable the DMA engine parity check (rather than adding parity support
to the to-be-replaced bwn(4) DMA implementation).
Currently, N-PHY support in bwn(4) is GPL licensed, and is not included by
default. Until this is replaced with Broadcom's ISC-licensed N-PHY
implementation, bwn(4) must be rebuilt to enable N-PHY support.
To build bwn(4) with N-PHY support, add the following lines to your kernel
configuration file and rebuild the kernel (and modules):
options BWN_GPL_PHY
To test bwn(4) with a BCM43224/BCM43225 device, install the firmware from
the net/bwn-firmware-kmod port, and place the following lines in
loader.conf(5):
hw.bwn_pci.preferred="1"
if_bwn_pci_load="YES
bwn_v4_ucode_load="YES"
bwn_v4_n_ucode_load="YES"
bwn_v4_lp_ucode_load="YES"
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Official Linux dts's put the individual portals under a simple-bus, rather
than under a '*-portals' grouping. This adds a hack to permit that, which
gets us closer to using stock device trees for DPAA-based devices.
- The window target must always be updated when stealing a register window.
- Fix missing initialization of bhndb(4) region alloc_flags when
registering statically mapped port regions (caught by scan-build).
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
the expected default board_vendor value on MIPS SoCs.
This is required by bwn(4) to differentiate between single-band and
dual-band device variants that otherwise share a common chip ID.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Upstream dts for allwinner will require a syscon driver, since the emac node
coming in 4.15 will be using xref to /soc/syscon for configuring the emac
clock. Add a generic syscon driver to attach to /soc/syscon for use by
if_awg, providing basic read/write functionality to consumers.
syscon driver will also be used by arm64 at least for A64+H5 emac/if_awg.
Written by: mmel
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13295
during startup. When a brand new chip leaves the factory, it is in a
special power-saving mode that disables most functions on the chip to
save battery power. The chip is stuck in this mode until the first write
to the time registers, which automatically clears the special power-saving
mode and starts the oscillator.
Also, the day-of-week register in this chip counts 1-7, not 0-6, so write
the values accordingly.
These changes are based on the patch submitted by Brian Scott, but I
elimated warnings since this condition is expected, and added some comments,
and so in general blame me for any mistakes.
PR: 223642
These were made redundant in r325841.
Reviewed by: hselasky
MFC after: 1 week (hselasky will MFC)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13401
This provides a nice wrarpper around the XPT_PATH_INQ ccb creation and
calling.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13387
Summary:
As in /dev/fb, allow the framebuffer driver to override the default memattr for
mmap(2). This is analogous to the change in 306555.
Reviewed By: ray
Differential Revision: https://reviews.freebsd.org/D13331
