Commit Graph

734 Commits

Author SHA1 Message Date
Warner Losh
581a68a232 Add support for MODULES_OVERRIDE. This is a list of modules to build
instead of all of them.  You can put this in /etc/make.conf or in
makeoptions.

Reviewed by: arch@

# docs to follow.
2001-04-02 08:52:05 +00:00
Scott Long
0001afe2f5 Make an attempt to get the asr driver to compile on Alpha by fixing some i386
specific bogons.  Compile with -O0, as anything higher gives the compiler
a fit.  No idea if this driver will actually work on Alpha, though.
2001-04-01 08:33:01 +00:00
Alfred Perlstein
d6436d0f22 Forgot to add pci_if.h to SRCS
Pointed out by: phk
2001-03-28 13:42:42 +00:00
Coleman Kane
05ca2115ba Remove NOMAN 2001-03-27 19:04:09 +00:00
Peter Wemm
63f51d9402 Catch these modules up with obrien's recent cleanup commit. 2001-03-24 22:33:43 +00:00
Peter Wemm
7866020b89 Drop 'KMODDEPS = snd_pcm' - it isn't used. 2001-03-24 22:28:49 +00:00
Peter Wemm
f335dba0ef Back out 'KMODDEPS = miibus' addition in last commit. This isn't used. 2001-03-24 22:21:59 +00:00
Robert Watson
3b41d5953a o Adding UFS_EXTATTR support in MFS required the inclusion of opt_ufs.h.
I didn't realize we had an MFS module, so didn't update the
  dependencies there to reflect opt_ufs.h.

Obtained from:	TrustedBSD Project
2001-03-19 07:04:17 +00:00
Orion Hodson
dfe67249d2 pcm driver for S3 Sonicvibes chipset.
Reviewed by:	Cameron Grant
2001-03-19 00:26:41 +00:00
Scott Long
d383383e6f Fix the building of the aac driver as a module. Add a comment about enabling
debug information for the driver.
2001-03-17 04:42:33 +00:00
Jonathan Lemon
7cbbb1afee Adjust the fxp module to use the correct directory path, and add a
dependency on miibus.
2001-03-12 21:44:19 +00:00
Jonathan Lemon
da3badcd23 Add Intel 82553, 82555 PHY driver. 2001-03-12 02:45:06 +00:00
Mark Murray
add3f7f3df The /dev/random driver used Rijndael, not Blowfish, now. 2001-03-10 12:57:08 +00:00
Boris Popov
f2acaea1b4 Remove now unused opt_ipx.h and opt_inet.h 2001-03-10 05:42:44 +00:00
Poul-Henning Kamp
a3e862d902 Remove vn(4) driver. 2001-03-09 20:10:35 +00:00
John Baldwin
b67cb27739 #if 0 out a variable only used in #if 0'd code to quiet a warning. 2001-03-06 03:07:58 +00:00
Warner Losh
f2fdbb57ca Add support for Dlink DL10022 to the ed driver. This is a mii part
bolted to a ne-2000 chip.  This is necessary for the NetGear FA-410TX
and other cards.

This also requires you add mii to your kernel if you have an ed driver
configured.

This code will result in a couple of timeout messages for ed on the
impacted cards.  Additional work will be needed, but this does work
right now, and many people need these cards.

Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
2001-03-03 08:31:37 +00:00
Julian Elischer
9bed6fe815 Not quite working makefile to make the nmdm device as a module. 2001-02-27 16:53:59 +00:00
Peter Wemm
adaae327bb Remove some cruft 2001-02-27 07:40:09 +00:00
Julian Elischer
e548a5c513 Allow the eiface node to be made as a module (not linked into build yet) 2001-02-25 06:18:22 +00:00
Julian Elischer
6de306ecee Add a Makefile for the sample node so It can be compiled.
This helps to stop it from geting out of sync.
It is not part of the normal build but I can use it with all the others
when I make changes to netgraph to ensure it is buildable.
2001-02-25 05:34:33 +00:00
Boris Popov
d8589bd5cb Introduce API for sequential reads/writes (build/dissect) of mbuf chains.
Reviewed by:	Ian Dowse <iedowse@maths.tcd.ie>,
		Bosko Milekic <bmilekic@technokratis.com>,
		Julian Elischer <julian@elischer.org> and arch@/net@
Obtained from:	smbfs
2001-02-24 15:44:30 +00:00
Julian Elischer
cdee49f986 Add a 'splitter' node to separate a bidirectional
packet flow into two unidirectional flows.

Part of a suite of nodes developed for packet flow control.
More to follow as I have time to port them to 5.x or
as others do so. The ipfw node will be the hardest..

Submitted by:	"Vitaly V. Belekhov" <vitaly@riss-telecom.ru>
2001-02-22 17:14:36 +00:00
Yoshihiro Takahashi
2eb8169a1a Fixed warnings. 2001-02-21 11:28:02 +00:00
Jonathan Lemon
da33b5e745 Hook up the linux module for alpha again.
Approved by:	beast
2001-02-20 02:19:01 +00:00
Matt Jacob
28b2e25674 Move linux to i386 only until it gets fixed for alpha (again). 2001-02-19 21:20:33 +00:00
Yoshihiro Takahashi
69115ebe90 Add pc98 support. 2001-02-10 12:52:56 +00:00
Yoshihiro Takahashi
2992e4e37f Added pc98 supports. 2001-02-08 13:24:30 +00:00
Semen Ustimenko
9526a692c6 Add QS6612, AC101 and LXT970 personal drivers and register definitions.
Obtained from:	NetBSD/OpenBSD
2001-02-07 19:57:40 +00:00
Cameron Grant
ab0ef99cfa add forgotten makefile 2001-02-05 01:16:12 +00:00
Cameron Grant
17e401f8a9 add driver for CS4281 sound chips
Submitted by:   Orion Hodson <O.Hodson@cs.ucl.ac.uk>
2001-02-04 19:23:35 +00:00
Cameron Grant
ebbb717721 add driver for CMedia CMI8338/CMI8738 sound chips
Submitted by:   Orion Hodson <O.Hodson@cs.ucl.ac.uk>
2001-02-04 19:13:40 +00:00
Warner Losh
1bd4d86275 Remove NAHA, NAHATOT and aha_softcs and related code. It was unused
except for setting it.  Also remove count from aha and replace it with
optional.

Also add commented out pccard lines for all the old card drivers.
They have to be commented out until they are converted because it
causes problems in NEWCARD.
2001-02-04 16:45:39 +00:00
Peter Wemm
173333f41c Remove some stray traces of KMODDEPS 2001-02-04 12:35:22 +00:00
Peter Wemm
481d7a5891 Zap obsolete (died with LKM) EXPORT_SYMS variable 2001-02-04 10:52:25 +00:00
Peter Wemm
205a48f7f3 Zap some bad examples:
opt_foo.h:
	touch opt_foo.h
.. is unnecessary - kmod.mk does this for us.
2001-02-04 08:23:14 +00:00
Scott Long
a5108eaebf Driver for the ESS Maestro3 and Allegro sound chips. Note that due to the
amount of GPL'd firmware in the driver, it will only be built as a module.

Approved by:	cg
2001-02-01 20:29:16 +00:00
Dag-Erling Smørgrav
fa20d78387 KLDify the "speaker" device (which calls itself atspeaker internally, and
is i386-specific, so name the module atspeaker rather than speaker).
2001-02-01 16:39:34 +00:00
Scott Long
ed2b5a2368 Update the module Makefile to reflect the state of things from the last
acpi-ca import.

Approved by:	msmith
2001-01-31 22:40:01 +00:00
John Hay
01b96fdf9e Make klds for the ar and sr devices and hook them up.
The normal versions are called if_ar.ko and if_sr.ko and the netgraph
versions ng_sync_ar.ko and ng_sync_sr.ko.
2001-01-30 10:20:43 +00:00
Peter Wemm
93cd41f72d Zap silly #if NPCI > 0 and the hoops that we jump through for the module
case.  Use an 'and' case in conf/files so that it only gets compiled if
pci is present.
2001-01-29 11:38:39 +00:00
Yoshihiro Takahashi
ba4c5e6950 Added necessary include for pc98. 2001-01-25 09:56:04 +00:00
Yoshihiro Takahashi
5069714534 Added PC-98 apm support.
Submitted by:	MURAMATSU Atsushi <amura@ma3.seikyou.ne.jp>
2001-01-22 11:27:25 +00:00
Peter Wemm
ba014c35dc Argh! add card_if.h to the generated list. This fixes kernel builds for
those who haven't added 'NO_MODULES=off' to /etc/make.conf.
2001-01-17 22:36:49 +00:00
Mark Murray
c202cd74f8 Clean up Makefile, and remove the last vestiges of NOBLOCKRANDOM. 2001-01-15 19:35:00 +00:00
Brian Feldman
7dd1f91a70 Evidently, svr4 is broken at the moment. Disconnect the build to prevent
Bad Things from unsuspecting module loaders.
2001-01-09 04:56:53 +00:00
Garrett Wollman
0a2c3d48c6 select() DKI is now in <sys/selinfo.h>. 2001-01-09 04:33:49 +00:00
Garrett Wollman
7f8c734f00 Note new location of wi driver source code. 2001-01-09 04:29:29 +00:00
Warner Losh
bdbd54e46d Add aic to the list of drivers that might work with NEWCARD. I've added
the same config lines that NetBSD has.  This builds with both NEWCARD
and GENERIC config files.
2001-01-08 01:59:15 +00:00
Peter Wemm
e4b36f7dd8 It is unlikely that we'll be supporting old-style ZMAGIC linux a.out
binaries on anything but i386.. (ia64, sparc64, etc)  Invert the .if
so that it is inclusive of i386 platforms rather than excluding just
the alpha.
2001-01-07 03:10:15 +00:00